[DOWN]Dieses FlashRom ist, auf Ihrer eigenen Gefahr nur zu verwenden!
Verwendbar mit der Vorrichtung:
PNA200S (nur die „S“ Version!!! Es unterscheidet sich von anderen - bitte so ist shure!!)
und
PNA250T
Auf dem Bewertung Aufkleber auf der Rückseite kann das korrekte deviceversion gesehen werden…
Anweisungen:
BILD-AUFSTEIGEN ÜBER Speicherkarte:
Vorbereitung:
- laden Sie die FlashRom Akte (winceimg.bin) zur Wurzel einer leeren und frischen formatierten SD/MMC Karte (mindestens 32MB
Kapazität). Überprüfen Sie, daß die Akte völlig kopiert ist!
- schließen Sie Wechselstrom Adapter an oder seien Sie shure thet, welches die Energie für die folgenden 15 Minuten wird garantiert…
1. Betätigen Sie die Navigation Auflage unten beim Durchführen eines harten Zurückstellens (Energie Schalter WEG VON und zurück zu AN, auf einigen Vorrichtungen dieses ist eingeschaltet
die Rückseite!!). Halten Sie Navigation Auflage heruntergedrückt bis Vorrichtung, die das PNA Blauaufladung Ladevorrichtung Informationen über Schirm zeigt.
2. Schließen Sie die SD/MMC Karte an, die das Bild enthält (Dateiname = winceimg.bin!) in Vorrichtung
3. Wählen Sie das „Gewinn CER Bild (SD/MMC)“ mit der Navigation Auflage und der Presse 1x die Auflage unten für O.K. vor. Grelle Prozeßanfänge. Notwendigkeiten
ungefähr 5 Minuten
4. Wenn „beendet - beginnen Sie Ihre Vorrichtung“ erscheint wiederholen ein hartes Zurückstellen wieder.
5. Sie können die Speicherkarte ausstoßen und im ersten Start müssen Sie den Schirm wieder kalibrieren…
(benutzen Sie den Schreibkopf)
6. Bringen Sie wieder Sie Navigation Software an - haben Sie Spaß…
Diese Akte ist, Ihre Vorrichtung nur zurückzugewinnen! Seine außen jede mögliche Garantie ist irgendwie @ nur vorhanden
GoPal-Navigator.de!!!
Wenn Sie irgendeine Frage - im Brett fragen lassen!
HIER IST ORIGINAL :
This FlashRom is only to use on your own risk!
Useable with the device:
PNA200S (only the "S" Version!!! It differs from others - so please be shure!!)
and
PNA250T
On the rating label on the backside the correct deviceversion can be seen...
Instructions:
IMAGE UPGRADE VIA Storage Card:
Preparation:
- load the FlashRom file (winceimg.bin) to the root of an empty and fresh formatted SD/MMC card (at least 32MB
capacity). Verify that the file is fully copied!
- connect AC adapter or be shure thet the power for the next 15 minutes is guaranteed...
1. Press the navigation pad down while performing a Hard Reset (Power Switch OFF and back to ON, on some devices this is on
the back!!). Keep navigation pad pressed down until device the PNA shows a blue boot loader information on screen.
2. Plug in the SD/MMC card containing the image (filename = winceimg.bin!) into device
3. Select the "Win CE Image (SD/MMC)” with the navigation pad and press 1x the pad down for OK. Flash process starts. Needs
about 5 minutes
4. When "Finished - Restart your device" appears perform a Hard Reset again.
5. You can eject the Storage card and in first startup you have to calibrate the screen again...
(use the Stylus)
6. Install again you navigation software - have fun...
This file is only to recover your device! Its without any guarantee any is only available @
GoPal-Navigator.de !!!
If you have any question - ask in the board![/DOWN]