FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

[rolu2]

AW: FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

Du hast beim reader ein # vor der group = 1. Mach das mal weg

Edit: Treiber aktiv FTDI reicht

Gesendet von meinem JY-G3 mit Tapatalk

 

[staobeisa]

AW: FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

Hallo also der Hacken bei Group ist raus.

folgendes Lof file

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Mar 28 10:06:41 2014
-------------------------------------------------------------------------------
2014/03/28 10:06:41 0 s >> OSCam << cardserver started, version 1.20-emu, build r9575 (mipsel-linux-uclibc-libusb)
2014/03/28 10:06:41 0 s creating pidfile /var/run/oscam.pid with pid 17880
2014/03/28 10:06:41 0 s services reloaded: 0 services freed, 8 services loaded, rejected 0
2014/03/28 10:06:41 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/03/28 10:06:41 0 s signal handling initialized
2014/03/28 10:06:41 0 s 159 service-id's loaded in 8ms
2014/03/28 10:06:41 0 s 167 tier-id's loaded
2014/03/28 10:06:41 0 s 4 provid's loaded
2014/03/28 10:06:41 0 s 22 lengths for caid guessing loaded
2014/03/28 10:06:41 0 s monitor: initialized (fd=8, port=988)
2014/03/28 10:06:41 0 s cccam: initialized (fd=9, port=11011)
2014/03/28 10:06:41 0 s skyV14 [mouse] creating thread for device /dev/ttyUSB0
2014/03/28 10:06:41 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/03/28 10:06:41 0 s waiting for local card init
2014/03/28 10:06:41 5256D8 h webif: decompressed 154478 bytes back into 360524 bytes
2014/03/28 10:06:41 5256D8 h HTTP Server running. ip=0.0.0.0 port=83
2014/03/28 10:06:42 5239D8 r skyV14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369)
2014/03/28 10:06:42 5239D8 r skyV14 [mouse] card detected
2014/03/28 10:06:44 5239D8 r skyV14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/03/28 10:06:44 5239D8 r skyV14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/03/28 10:06:44 5239D8 r skyV14 [mouse] Setting baudrate to 39677 bps
2014/03/28 10:06:44 5239D8 r skyV14 [mouse] Calculated work ETU is 25.20 us reader mhz = 369
2014/03/28 10:06:44 5239D8 r skyV14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2014/03/28 10:06:45 5239D8 r skyV14 [mouse] Card type: P1TV
2014/03/28 10:06:45 5239D8 r skyV14 [mouse] Rom version: 20AA
2014/03/28 10:06:45 5239D8 r skyV14 [mouse] Credit available on card: 0 €
2014/03/28 10:06:45 5239D8 r skyV14 [mouse] Extended 4C detected
2014/03/28 10:06:45 5239D8 r skyV14 [mouse] Region Code: 00BO0102
2014/03/28 10:06:45 5239D8 r skyV14 [mouse] Pincode read: 1659
2014/03/28 10:06:45 5239D8 r skyV14 [mouse] PCB settings: FF FF FF FF
2014/03/28 10:06:45 5239D8 r skyV14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/03/28 10:06:45 5239D8 r skyV14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2014/03/28 10:06:45 5239D8 r skyV14 [mouse] ready for requests
2014/03/28 10:06:45 5239D8 r skyV14 [mouse] found card system videoguard2
2014/03/28 10:06:45 5239D8 r skyV14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/03/28 10:06:45 5239D8 r skyV14 [videoguard2] card detected
2014/03/28 10:06:45 5239D8 r skyV14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/03/28 10:06:45 5239D8 r skyV14 [videoguard2] tier: 0046, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:45 5239D8 r skyV14 [videoguard2] tier: 005d, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:45 5239D8 r skyV14 [videoguard2] tier: 005e, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:45 5239D8 r skyV14 [videoguard2] tier: 0065, expiry date: 2014/06/25-01:00:00 SKY
2014/03/28 10:06:45 5239D8 r skyV14 [videoguard2] tier: 0066, expiry date: 2014/06/25-01:00:00 Sky
2014/03/28 10:06:45 5239D8 r skyV14 [videoguard2] tier: 0067, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:45 5239D8 r skyV14 [videoguard2] tier: 0068, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:45 5239D8 r skyV14 [videoguard2] tier: 0069, expiry date: 2014/06/25-01:00:00 Sky
2014/03/28 10:06:45 5239D8 r skyV14 [videoguard2] tier: 006a, expiry date: 2014/06/25-01:00:00 Sky
2014/03/28 10:06:45 5239D8 r skyV14 [videoguard2] tier: 006b, expiry date: 2014/06/25-01:00:00 Sky
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 006f, expiry date: 2014/06/25-01:00:00 Sky
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 007b, expiry date: 2014/06/25-01:00:00 Sky
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 007d, expiry date: 2014/06/25-01:00:00 Sky
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 0081, expiry date: 2014/06/25-01:00:00 Sky
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 008e, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 00c0, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 00c7, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 00c8, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 00c9, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 00ca, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 00e4, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 00e5, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 00f3, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 00fa, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:46 5239D8 r skyV14 [videoguard2] tier: 00ff, expiry date: 2014/06/25-01:00:00
2014/03/28 10:06:51 0 s init for all local cards done
2014/03/28 10:06:51 0 s anti cascading disabled

 

[rolu2]

AW: FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

Keine Verbindung vom Clienten

Hast du die Portweiterleitung unter Freetz intern auf die Box eingerichtet vom Port 11011

 

[staobeisa]

AW: FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

Hallo Portfreigabe ist eingetragen.

 

[rolu2]

AW: FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

Wie sieht die aus?

 

[staobeisa]

In Freetz AVM-Firewall
Neue Port Forwarding-Regel
Protokoll: tpc port 11011

 

[mickdry]

AW: FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

Versuch doch mal 357 und nicht 369.
läuft bei mir astrein:

Spoiler

#oscam.server

[reader]
label = SKYV14
protocol = mouse
device = /dev/ttyUSB1
ins7e11 = 15
ndsversion = 2
caid = 098C
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2

Spoiler

------------------------------------------------------------------------------->> OSCam << cardserver started at Sat Mar 29 21:58:51 2014
-------------------------------------------------------------------------------
2014/03/29 21:58:51 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9064 (mipsel-linux-uclibc-libusb)
2014/03/29 21:58:51 0 s creating pidfile /var/run/oscam.pid with pid 22813
2014/03/29 21:58:51 0 s services reloaded: 0 services freed, 4 services loaded, rejected 0
2014/03/29 21:58:51 0 s userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2014/03/29 21:58:51 0 s signal handling initialized
2014/03/29 21:58:51 0 s 250 service-id's loaded in 12ms
2014/03/29 21:58:51 0 s 250 tier-id's loaded
2014/03/29 21:58:51 0 s 30 provid's loaded
2014/03/29 21:58:51 0 s 22 lengths for caid guessing loaded
2014/03/29 21:58:51 0 s monitor: initialized (fd=7, port=988)
2014/03/29 21:58:51 0 s cccam: initialized (fd=8, port=xxxxx)
2014/03/29 21:58:51 0 s SKYV14 [mouse] creating thread for device /dev/ttyUSB1
2014/03/29 21:58:51 50B3F8 h webif: decompressed 54567 bytes back into 155280 bytes
2014/03/29 21:58:51 50B3F8 h HTTP Server running. ip=0.0.0.0 port=83
2014/03/29 21:58:51 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/03/29 21:58:51 0 s waiting for local card init
2014/03/29 21:58:51 5096F8 r SKYV14 [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2014/03/29 21:58:52 5096F8 r SKYV14 [mouse] card detected
2014/03/29 21:58:53 5096F8 r SKYV14 [mouse] ATR: xxxxxxxxxxxxxxxxxx
2014/03/29 21:58:53 5096F8 r SKYV14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/03/29 21:58:53 5096F8 r SKYV14 [mouse] Setting baudrate to 153600 bps
2014/03/29 21:58:53 5096F8 r SKYV14 [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2014/03/29 21:58:53 5096F8 r SKYV14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/03/29 21:58:54 5096F8 r SKYV14 [mouse] Card type: P1TV
2014/03/29 21:58:54 5096F8 r SKYV14 [mouse] Rom version: 20AA
2014/03/29 21:58:54 5096F8 r SKYV14 [mouse] parental lock setting: FF FF FF FF
2014/03/29 21:58:54 5096F8 r SKYV14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/03/29 21:58:54 5096F8 r SKYV14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2014/03/29 21:58:54 5096F8 r SKYV14 [mouse] ready for requests
2014/03/29 21:58:54 5096F8 r SKYV14 [mouse] found card system videoguard2
2014/03/29 21:58:54 5096F8 r SKYV14 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/03/29 21:58:54 5096F8 r SKYV14 [videoguard2] card detected
2014/03/29 21:58:54 5096F8 r SKYV14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/03/29 21:58:54 5096F8 r SKYV14 [videoguard2] tier: 0046, expiry date: 2014/07/19-01:00:00
2014/03/29 21:58:54 5096F8 r SKYV14 [videoguard2] tier: 005d, expiry date: 2014/07/19-01:00:00
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 005e, expiry date: 2014/07/19-01:00:00
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 0065, expiry date: 2014/07/19-01:00:00 Universal HD Germany
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 0066, expiry date: 2014/07/19-01:00:00 Sky HD FanZone
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 0067, expiry date: 2014/07/19-01:00:00
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 0068, expiry date: 2014/07/19-01:00:00
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 0069, expiry date: 2014/07/19-01:00:00 Sky Bundesliga HD 1
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 006a, expiry date: 2014/07/19-01:00:00 Pro7 Fun HD
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 006b, expiry date: 2014/07/19-01:00:00 Sky Hits HD Germany
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 007b, expiry date: 2014/07/19-01:00:00 TNT Serie HD
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 007d, expiry date: 2014/07/19-01:00:00 AXN HD Germany
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 0081, expiry date: 2014/07/19-01:00:00 Sky Sport HD Germany
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 008e, expiry date: 2014/07/19-01:00:00
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 00c7, expiry date: 2014/07/19-01:00:00
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 00c8, expiry date: 2014/07/19-01:00:00
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 00c9, expiry date: 2014/07/19-01:00:00
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 00ca, expiry date: 2014/07/19-01:00:00
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 00e4, expiry date: 2014/07/19-01:00:00
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 00e5, expiry date: 2014/07/19-01:00:00
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 00f3, expiry date: 2014/07/19-01:00:00
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 00fa, expiry date: 2014/07/19-01:00:00
2014/03/29 21:58:55 5096F8 r SKYV14 [videoguard2] tier: 00ff, expiry date: 2014/07/19-01:00:00
2014/03/29 21:59:00 0 s init for all local cards done
2014/03/29 21:59:00 0 s anti cascading disabled
2014/03/29 21:59:00 538A58 c anonymous disconnected from 192.168.178.22
2014/03/29 21:59:10 53DD60 c encrypted cccam-client 192.168.178.22 granted (dream, au=auto (1 reader))
2014/03/29 21:59:15 53DD60 c dream (098C&000000/025A/0082/98:F8ADF320668D5CF4E5D1BBBDD8EEAFF2): found (132 ms) by SKYV14 - Discovery HD Deutschland
2014/03/29 21:59:22 53DD60 c dream (098C&000000/025A/0082/98:8465169D4C471A9CF615E44E970A8E2A): found (113 ms) by SKYV14 - Discovery HD Deutschland
2014/03/29 21:59:29 53DD60 c dream (098C&000000/025A/0082/98:3C40D43CE9505E0940695A1DA927CF2B): found (121 ms) by SKYV14 - Discovery HD Deutschland

 

[staobeisa]

AW: FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

Hallo mickdry
danke für die Antwort hab das ausprobiert und wird aber nicht hell.
Der Client ist über eine 2te Fritzbox die per lan mit der Hauptbox verbunden ist angeschlossen, vieleicht ist das mein Problem.

Bin schon am verzweifeln.

Log sieht bei mir unten so aus

Spoiler

2014/03/30 13:29:44 526430 r SKYV14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/03/30 13:29:44 526430 r SKYV14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2014/03/30 13:29:44 526430 r SKYV14 [mouse] ready for requests
2014/03/30 13:29:44 526430 r SKYV14 [mouse] found card system videoguard2
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] card detected
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 0046, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 005d, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 005e, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 0065, expiry date: 2014/06/25-01:00:00 Universal HD Germany
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 0066, expiry date: 2014/06/25-01:00:00 Sky HD FanZone
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 0067, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 0068, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 0069, expiry date: 2014/06/25-01:00:00 Sky Bundesliga HD 1
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 006a, expiry date: 2014/06/25-01:00:00 Pro7 Fun HD
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 006b, expiry date: 2014/06/25-01:00:00 Sky Hits HD Germany
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 006f, expiry date: 2014/06/25-01:00:00 Disney Cinemagic HD Germany
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 007b, expiry date: 2014/06/25-01:00:00 TNT Serie HD
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 007d, expiry date: 2014/06/25-01:00:00 AXN HD Germany
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 0081, expiry date: 2014/06/25-01:00:00 Sky Sport HD Germany
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 008e, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 00c0, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 00c7, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 00c8, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 00c9, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 00ca, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 00e4, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 00e5, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 00f3, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 00fa, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:44 526430 r SKYV14 [videoguard2] tier: 00ff, expiry date: 2014/06/25-01:00:00
2014/03/30 13:29:47 0 s init for all local cards done
2014/03/30 13:29:47 0 s anti cascading disabled
2014/03/30 13:29:49 539B28 c anonymous disconnected from 192.168.2.26
2014/03/30 13:29:57 543AB0 c encrypted cccam-client 192.168.2.26 granted (wz, au=auto (1 reader))
2014/03/30 13:30:22 543AB0 c wz disconnected from 192.168.2.26

 

[rolu2]

AW: FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

Es versucht sich was zu verbinden. Liste doch noch mal bitte dein netzwerk auf.
Poste nochmal die aktuellen config und Einstellungen in Freetz. Einstellungen am besten mit Bildern

Gesendet von meinem JY-G3 mit Tapatalk

 

[staobeisa]

AW: FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

Hallo rolu2 Danke für die Hilfe
Ich glaub ich bin ein hoffnugsloser fall.
Mein Netzwerk sieht so aus
FB 7270v3 Hauptbox
FB 7270v2 per Kabel mit Hauptbox verbunden an dieser ist der Oti Client über cccam verbunden
Einstellungen im Freetz ( wie füge ich Bilder ein)
folgende Treiber geladen USB2 serial und FTDI 1.5.0

conf

Spoiler

[global]
logfile = /var/tbmodlog/oscam.log
fallbacktimeout = 2000
nice = -1
maxlogsize = 1000
preferlocalcards = 1

[cache]
delay = 120

[cccam]
port = xxxxx
reshare = 0
version = 2.1.1
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240
ignorereshare = 1
minimizecards = 1
#nodeid = 30d5de61317edce5


[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
monlevel = 1
hideclient_to = 30

[webif]
httpport = 83
httpuser = xxxxx
httppwd = xxxxx
httprefresh = 10
httphideidleclients = 1
httpallowed = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 30

server

Spoiler

[reader]
label = SKYV14
protocol = mouse
device = /dev/ttyUSB0
ins7e11 = 15
ndsversion = 2
caid = 098C
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2

 

[rolu2]

AW: FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

Auf der FB 7270v3 ist Freetz?
Die FB 7270v2 ist über LAN1 angeschlossen und hat ein feste IP oder eine über DHCP?

oscam.user fehlt noch und die cccam.cfg vom Clienten

Edit: bilder kannst du

Sie müssen registriert sein, um Links zu sehen.

r hochladen und dann im Beitrag anhängen
mit

 [img]link [/img]

 

[staobeisa]

AW: FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

Hallo
ja auf der FB v3 ist freetz
die FB v2 ist über lan 1 mit ferster IP

user

Spoiler

[account]
user = ge
pwd = 1
caid = 9070
monlevel = 1
au = 1
group = 1
services = hd +,rf digital,sky deutschland
cccmaxhops = 1
cccreshare = 1

[account]
user = wz
pwd = 1
caid = 9070
monlevel = 1
au = 1
group = 1
cccmaxhops = 1
cccreshare = 1

- - - - - - - - - -

Hab cccam vergessen
muss ich die aus starten oder nur oscam?

Spoiler

cccam ist gestartet
port xxxxx
user xx
pass xx

 

[rolu2]

AW: FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

Die cccam.cfg vom Clienten ist das aber nicht

 

[staobeisa]

AW: FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

die daten die ich beim Cienten eingetragen habe.

oder meinst du die vom Freetz

cccam.cfg fim Freetz

Spoiler

F: user pass
C: user pass
SERVER LISTEN PORT : xxxxx

ALLOW WEBINFO: yes
SHOW EXTENEDED CLIENT INFO : yes
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME : cccam
WEBINFO PASSWORD : cccam
#ALLOW TELNETINFO: yes
#TELNETINFO LISTEN PORT : 16000
#TELNETINFO USERNAME : cccam
#TELNETINFO PASSWORD : cccam

MINIMUM DOWNHOPS: 1

# SOFTKEY FILE : /var/etc/cccam/SoftCam.Key
# AUTOROLL FILE : var/etc/cccam/AutoRoll.Key
# STATIC CW FILE : /var/etc/cccam/constant.cw
CAID PRIO FILE : /var/etc/cccam/CCcam.prio
PROVIDERINFO FILE : /var/etc/cccam/CCcam.providers
CHANNELINFO FILE : /var/etc/cccam/CCcam.channelinfo
LOG WARNINGS : /var/media/ftp/uStor01/cs/cccam/warnings.txt
cccam Log : /var/media/ftp/uStor01/logs/CCcam.log

SERIAL READER : /dev/ttyUSB0 mouse
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000

EMM Blocker : no
DISABLE EMM : yes
EXTRA EMM LEVEL : yes
SHOW TIMING : yes
DEBUG : yes

 

[rolu2]

AW: FritzBox 7270 v3 mit freetz-devel-11685M TBflex-2.5 Oscam Easymouse 2 und v14

Du willst doch oscam mit dem cccamprotokol nutzen. Da brauchst du keine cccam unter Freetz. Nur oscam
Daher geht das bei dir auch nicht. Was hast du wo beim clienten eingetragen

Gesendet von meinem JY-G3 mit Tapatalk