Freischaltung V14

[onkelz6489]

Hallo, habe denke ich alles so gemacht wie hier im Forum beschrieben ist nur leider wills nicht so recht.

Das AnalyseTool spuckt 2 Zeilen aus.
In der ersten steht nichts und in der zweiten AD hex / 173, allerdings kommen die zwei zeilen in der ersten Sekunde des Starts denke nicht dass das ein EMM ist.

Für mich liest sich das eher so wie wenn der Reader Probleme macht

Hier meine Einstellungen:

oscam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 2000
preferlocalcards = 1
block_same_ip = 0

[dvbapi]
enabled = 1
au = 1
user = xxxxxx
boxtype = xxxxxx

[webif]
httpport = xxxxx
httpuser = xxxxxxx
httppwd = xxxxxxxxx
httphelplang = de
httpallowed = 0.0.0.0-192.168.255.255

oscam.user

Spoiler

[account]
user = lokal
au = V14
group = 1

oscam.server

Spoiler

[reader]
label = V14
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
# blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-255
saveemm-u = 1
ndsversion = 2

oscam.dvbapi

Spoiler

P:098C 1
I:0

log : Die letzten Zeilen wiederholen sich dann andauernd

Spoiler

>> OSCam << cardserver started at Fri Jan 2 01:23:20 2015
-------------------------------------------------------------------------------
2015/01/02 01:23:20 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10076 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2015/01/02 01:23:20 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 5346
2015/01/02 01:23:21 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/01/02 01:23:21 0 s signal handling initialized
2015/01/02 01:23:21 0 s V14 [internal] creating thread for device /dev/sci0
2015/01/02 01:23:21 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/01/02 01:23:21 0 s waiting for local card init
2015/01/02 01:23:21 598FE0 h webif: decompressed 157280 bytes back into 375984 bytes
2015/01/02 01:23:21 598FE0 h HTTP Server running. ip=0.0.0.0 port=2002
2015/01/02 01:23:21 5907A0 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2015/01/02 01:23:22 5907A0 r V14 [internal] card detected
2015/01/02 01:23:23 5907A0 r V14 [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2015/01/02 01:23:23 5907A0 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/01/02 01:23:23 5907A0 r V14 [internal] Calculated work ETU is 26.05 us reader mhz = 357
2015/01/02 01:23:24 5907A0 r V14 [internal] ATR Fsmax is 5 MHz, clocking card to 3.57 (specified in reader->mhz)
2015/01/02 01:23:28 5907A0 r V14 [internal] card system not supported
2015/01/02 01:23:28 5907A0 r V14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/01/02 01:23:29 5907A0 r V14 [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2015/01/02 01:23:29 5907A0 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/01/02 01:23:29 5907A0 r V14 [internal] Calculated work ETU is 104.20 us reader mhz = 357
2015/01/02 01:23:30 5907A0 r V14 [internal] ATR Fsmax is 5 MHz, clocking card to 3.57 (specified in reader->mhz)
2015/01/02 01:23:34 5907A0 r V14 [internal] card system not supported
2015/01/02 01:23:34 5907A0 r V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/01/02 01:23:34 5907A0 r V14 [internal] card initializing error
2015/01/02 01:23:34 0 s init for all local cards done
2015/01/02 01:23:34 0 s anti cascading disabled
2015/01/02 01:23:34 5A05C8 c plain dvbapi-client granted (anonymous, au=off)
2015/01/02 01:23:34 5A05C8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
2015/01/02 01:23:36 5A05C8 c [NEW ECMPID #0] CAID: 1702 ECM_PID: 1728 PROVID: 000000
2015/01/02 01:23:36 5A05C8 c [NEW ECMPID #1] CAID: 1833 ECM_PID: 1828 PROVID: 000000
2015/01/02 01:23:36 5A05C8 c [NEW ECMPID #2] CAID: 09C4 ECM_PID: 1B28 PROVID: 000000
2015/01/02 01:23:36 5A05C8 c [NEW ECMPID #3] CAID: 09AF ECM_PID: 1F28 PROVID: 000000
2015/01/02 01:23:36 5A05C8 c [NEW ECMPID #4] CAID: 098C ECM_PID: 1A28 PROVID: 000000
2015/01/02 01:23:36 5A05C8 c Found 5 ECMpids and 3 STREAMpids in PMT
2015/01/02 01:23:36 5A05C8 c [DVBAPI] Receiver wants to demux srvid 0204 on adapter 0000 camask 0008 index 0003 pmtpid 006C
2015/01/02 01:23:36 5A05C8 c New program number: 0204 (1702:0204 unknown) [pmt_list_management 3]
2015/01/02 01:23:36 5A05C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A28 PMTPID 006C (NO MATCHING READER)
2015/01/02 01:23:36 5A05C8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/01/02 01:23:36 5A05C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A28 PMTPID 006C (NO MATCHING READER)
2015/01/02 01:23:36 5A05C8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/01/02 01:23:36 5A05C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A28 PMTPID 006C (NO MATCHING READER)
2015/01/02 01:23:37 5A05C8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/01/02 01:23:37 5A05C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A28 PMTPID 006C (NO MATCHING READER)
2015/01/02 01:23:37 5A05C8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/01/02 01:23:38 5A05C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A28 PMTPID 006C (NO MATCHING READER)
2015/01/02 01:23:38 5A05C8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/01/02 01:23:38 5A05C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A28 PMTPID 006C (NO MATCHING READER)
2015/01/02 01:23:39 5A05C8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/01/02 01:23:39 5A05C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A28 PMTPID 006C (NO MATCHING READER)
2015/01/02 01:23:39 5A05C8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/01/02 01:23:39 5A05C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A28 PMTPID 006C (NO MATCHING READER)
2015/01/02 01:23:40 5A05C8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/01/02 01:23:40 5A05C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A28 PMTPID 006C (NO MATCHING READER)
2015/01/02 01:23:41 5A05C8 c [NEW ECMPID #0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2015/01/02 01:23:41 5A05C8 c [NEW ECMPID #1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2015/01/02 01:23:41 5A05C8 c [NEW ECMPID #2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2015/01/02 01:23:41 5A05C8 c [NEW ECMPID #3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2015/01/02 01:23:41 5A05C8 c [NEW ECMPID #4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2015/01/02 01:23:41 5A05C8 c Found 5 ECMpids and 2 STREAMpids in PMT
2015/01/02 01:23:41 5A05C8 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0008 index 0003 pmtpid 0061
2015/01/02 01:23:41 5A05C8 c New program number: 0017 (1702:0017 unknown) [pmt_list_management 3]
2015/01/02 01:23:41 5A05C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2015/01/02 01:23:41 5A05C8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/01/02 01:23:41 5A05C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2015/01/02 01:23:42 5A05C8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!

 

[Alex]

AW: Freischaltung V14

2015/01/02 01:23:34 5907A0 r V14 [internal] card initializing error

Deine Karte wird gar nicht richtig gelesen. Mach mal autospeed = 1
Die letzten Zeilen heißen so viel, wie ich ifnde keinen Reader um das Programm zu erhellen.
Deinen ATR brauchst du btw. auch nicht zensieren, habe n doch alle V14 Karten den gleichen.

 

[dodo83]

AW: Freischaltung V14

CARDMHZ mal auf 2700 setzen bei Verwendung des internen Readers und neueren OScam Versionen

 

[onkelz6489]

AW: Freischaltung V14

ok, jetzt steht schonmal "start succesfull" da, jetzt warte ich nur mehr auf die EMM`s

Leider kann ich übers Online-Kundencenter momentan keine Freischaltung mehr anfordern

 

[supraracer]

AW: Freischaltung V14

Du brauchst auch keine neue Freischaltung, die benötigten EMM kommen über mehrere Tage.

-supraracer

 

[onkelz6489]

AW: Freischaltung V14

Ich habe die Karte jetzt seit der Früh im Receiver nur bekomme ich garkeine EMM.

Leider ist die Online Freischaltung noch immer nicht möglich.
Was fragt mich die Tante auf der anderen Seite des Hörers dann wenn ich anrufe?

Aja noch was: Sieht doch jetzt gut aus?
Oder ist noch irgedwas nicht in Ordnung?

Nicht dass ich dann morgen anrufe und die Einstellung noch nicht passen und ich dann das Freischaltsignal wieder nicht loggen kann.

log
Die letzten Zeilen wiederholen sich dann stetig

Spoiler

>> OSCam << cardserver started at Fri Jan 2 17:52:50 2015
-------------------------------------------------------------------------------
2015/01/02 17:52:50 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10076 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2015/01/02 17:52:50 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2311
2015/01/02 17:52:50 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/01/02 17:52:50 0 s signal handling initialized
2015/01/02 17:52:50 0 s V14 [internal] creating thread for device /dev/sci0
2015/01/02 17:52:50 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/01/02 17:52:50 0 s waiting for local card init
2015/01/02 17:52:50 598FE0 h webif: decompressed 157280 bytes back into 375984 bytes
2015/01/02 17:52:50 598FE0 h HTTP Server running. ip=0.0.0.0 port=2002
2015/01/02 17:52:50 5907A0 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2015/01/02 17:52:51 5907A0 r V14 [internal] card detected
2015/01/02 17:52:52 5907A0 r V14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/01/02 17:52:52 5907A0 r V14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/01/02 17:52:52 5907A0 r V14 [internal] Calculated work ETU is 4.65 us reader mhz = 500
2015/01/02 17:52:53 5907A0 r V14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2015/01/02 17:52:54 5907A0 r V14 [internal] Card type: P1TV
2015/01/02 17:52:54 5907A0 r V14 [internal] Rom version: 20AA
2015/01/02 17:52:54 5907A0 r V14 [internal] Credit available on card: 0 euro
2015/01/02 17:52:54 5907A0 r V14 [internal] Extended 4C detected
2015/01/02 17:52:54 5907A0 r V14 [internal] FuseByte: 00
2015/01/02 17:52:54 5907A0 r V14 [internal] Region Code:
2015/01/02 17:52:54 5907A0 r V14 [internal] Country Code: DEU
2015/01/02 17:52:54 5907A0 r V14 [internal] Pincode read: 9785
2015/01/02 17:52:54 5907A0 r V14 [internal] PCB settings: FF FF FF FF
2015/01/02 17:52:54 5907A0 r V14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/01/02 17:52:54 5907A0 r V14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/01/02 17:52:54 5907A0 r V14 [internal] ready for requests
2015/01/02 17:52:54 5907A0 r V14 [internal] found card system videoguard2
2015/01/02 17:52:54 5907A0 r V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/02 17:52:54 5907A0 r V14 [videoguard2] card detected
2015/01/02 17:52:54 5907A0 r V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/01/02 17:52:56 0 s init for all local cards done
2015/01/02 17:52:56 0 s anti cascading disabled
2015/01/02 17:52:56 59FE78 c plain dvbapi-client granted (anonymous, au=off)
2015/01/02 17:52:56 59FE78 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
2015/01/02 17:52:59 59FE78 c [NEW ECMPID #0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2015/01/02 17:52:59 59FE78 c [NEW ECMPID #1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2015/01/02 17:52:59 59FE78 c [NEW ECMPID #2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2015/01/02 17:52:59 59FE78 c [NEW ECMPID #3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2015/01/02 17:52:59 59FE78 c [NEW ECMPID #4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2015/01/02 17:52:59 59FE78 c Found 5 ECMpids and 2 STREAMpids in PMT
2015/01/02 17:52:59 59FE78 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0008 index 0003 pmtpid 0061
2015/01/02 17:52:59 59FE78 c New program number: 0017 (1702:0017 unknown) [pmt_list_management 3]
2015/01/02 17:52:59 59FE78 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF
2015/01/02 17:52:59 5907A0 r V14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/01/02 17:52:59 5907A0 r V14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/01/02 17:52:59 5907A0 r V14 [videoguard2] classD3 ins54: no cw --> No tier found
2015/01/02 17:52:59 5907A0 r V14 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/01/02 17:52:59 59FE78 c anonymous (098C&000000/01FB/0017/98:C900C2F4A5B18FE6D2BF67DF43EB26B3): not found (82 ms) by V14
2015/01/02 17:52:59 59FE78 c anonymous (098C&000000/01FB/0017/98:C900C2F4A5B18FE6D2BF67DF43EB26B3): not found (3 ms) by V14
2015/01/02 17:52:59 59FE78 c anonymous (098C&000000/01FB/0017/98:C900C2F4A5B18FE6D2BF67DF43EB26B3): not found (4 ms) by V14
2015/01/02 17:53:00 59FE78 c anonymous (098C&000000/01FB/0017/98:C900C2F4A5B18FE6D2BF67DF43EB26B3): not found (3 ms) by V14
2015/01/02 17:53:00 59FE78 c anonymous (098C&000000/01FB/0017/98:C900C2F4A5B18FE6D2BF67DF43EB26B3): not found (4 ms) by V14
2015/01/02 17:53:00 59FE78 c anonymous (098C&000000/01FB/0017/98:C900C2F4A5B18FE6D2BF67DF43EB26B3): not found (3 ms) by V14
2015/01/02 17:53:00 59FE78 c anonymous (098C&000000/01FB/0017/98:C900C2F4A5B18FE6D2BF67DF43EB26B3): not found (4 ms) by V14
2015/01/02 17:53:01 59FE78 c anonymous (098C&000000/01FB/0017/98:C900C2F4A5B18FE6D2BF67DF43EB26B3): not found (3 ms) by V14
2015/01/02 17:53:01 59FE78 c anonymous (098C&000000/01FB/0017/98:C900C2F4A5B18FE6D2BF67DF43EB26B3): not found (4 ms) by V14
2015/01/02 17:53:01 59FE78 c anonymous (098C&000000/01FB/0017/98:C900C2F4A5B18FE6D2BF67DF43EB26B3): not found (3 ms) by V14
2015/01/02 17:53:01 59FE78 c anonymous (098C&000000/01FB/0017/98:C900C2F4A5B18FE6D2BF67DF43EB26B3): not found (4 ms) by V14
2015/01/02 17:53:02 0 --- Skipped 2 duplicated log lines ---
2015/01/02 17:53:02 5907A0 r V14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/01/02 17:53:02 5907A0 r V14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/01/02 17:53:02 5907A0 r V14 [videoguard2] classD3 ins54: no cw --> No tier found
2015/01/02 17:53:02 5907A0 r V14 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/01/02 17:53:02 59FE78 c anonymous (098C&000000/01FB/0017/98:74471DF98AA03FBDF4C460DE754FFA94): not found (60 ms) by V14
2015/01/02 17:53:02 59FE78 c anonymous (098C&000000/01FB/0017/98:74471DF98AA03FBDF4C460DE754FFA94): not found (5 ms) by V14
2015/01/02 17:53:03 59FE78 c anonymous (098C&000000/01FB/0017/98:74471DF98AA03FBDF4C460DE754FFA94): not found (4 ms) by V14

 

[Hardy009]

AW: Freischaltung V14

Also wenn ich mich nicht täusche, fehlt dir unter die Zeile unter "global":

[global]
emmlogdir = /tmp

Oder du musst im OScam-Config-Verzeichnis nachsehen.
Da findst du die Datei aber sofort.

Hardy009

 

[Zwenny]

AW: Freischaltung V14

wenn du einen Pfad vorgibst, dann erstens nicht nach tmp, da wirds bei neustart wieder gelöscht und zweitens so,
emmlogdir = /var/log/

 

[onkelz6489]

AW: Freischaltung V14

So ich bins nochmal.
Leider kommen immer noch keine EMM bei mir an und die Zusendung des Freischaltsignals übers Kundencenter geht auch nicht.
Kann mir jemand bitte sagen was ich der Dame von Sky zu sagen habe oder ob irgendwelche unangenehme Fragen auf mich warten?

Und meine Konfiguartion habe ich auch noch geändert, eventuell kann jemand ein Auge drauf werden damit dann alles klappt wenn ich mir das Signal zusenden lasse.
Ich möchte das heute noch hinbringen, da ich noch ein paar Tage Zeit habe bis zum 2 wöchigen Rücktrittsrecht und wenn ich mich jetzt schon zu blöd anstelle was wird dann erst in Zukunft werden :emoticon-0106-cryin

Hier meine Einstellungen:

oscam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 2000
preferlocalcards = 1
block_same_ip = 0
emmlogdir = /var/log/emm.log

[dvbapi]
enabled = 1
au = 1
user = xxxx
boxtype = xxxxx

[webif]
httpport = xxxx
httpuser = xxxxxxx
httppwd = xxxxxx
httphelplang = de
httpallowed = 0.0.0.0-192.168.255.255

oscam.user

Spoiler

[account]
user = herbert
au = V14
group = 1

[account]
user = root
uniq = 3
au = 1
group = 1

oscam.server

Spoiler

[reader]
label = V14
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 098C
boxid = 12345678
mhz = 357
cardmhz = 2700
autospeed = 1
ins7e11 = 15
detect = cd
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
# blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-255
saveemm-u = 1
ndsversion = 2

oscam.dvbapi

Spoiler

P:098C 1
I:0

log : Die letzten Zeilen wiederholen sich dann andauernd

Spoiler

>> OSCam << cardserver started at Sat Jan 3 10:33:42 2015
-------------------------------------------------------------------------------
2015/01/03 10:33:42 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10076 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2015/01/03 10:33:42 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 23807
2015/01/03 10:33:42 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/01/03 10:33:42 0 s signal handling initialized
2015/01/03 10:33:42 0 s V14 [internal] creating thread for device /dev/sci0
2015/01/03 10:33:42 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/01/03 10:33:42 0 s waiting for local card init
2015/01/03 10:33:42 592698 h webif: decompressed 157280 bytes back into 375984 bytes
2015/01/03 10:33:42 592698 h HTTP Server running. ip=0.0.0.0 port=2002
2015/01/03 10:33:42 590868 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2015/01/03 10:33:43 590868 r V14 [internal] card detected
2015/01/03 10:33:45 590868 r V14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/01/03 10:33:45 590868 r V14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/01/03 10:33:45 590868 r V14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/01/03 10:33:45 590868 r V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/01/03 10:33:46 590868 r V14 [internal] Card type: P1TV
2015/01/03 10:33:46 590868 r V14 [internal] Rom version: 20AA
2015/01/03 10:33:46 590868 r V14 [internal] Credit available on card: 0 euro
2015/01/03 10:33:46 590868 r V14 [internal] Extended 4C detected
2015/01/03 10:33:46 590868 r V14 [internal] FuseByte: 00
2015/01/03 10:33:46 590868 r V14 [internal] Region Code:
2015/01/03 10:33:46 590868 r V14 [internal] Country Code: DEU
2015/01/03 10:33:47 590868 r V14 [internal] Pincode read: 9785
2015/01/03 10:33:47 590868 r V14 [internal] PCB settings: FF FF FF FF
2015/01/03 10:33:47 590868 r V14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/01/03 10:33:47 590868 r V14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/01/03 10:33:47 590868 r V14 [internal] ready for requests
2015/01/03 10:33:47 590868 r V14 [internal] found card system videoguard2
2015/01/03 10:33:47 590868 r V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/03 10:33:47 590868 r V14 [videoguard2] card detected
2015/01/03 10:33:47 590868 r V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/01/03 10:33:49 0 s init for all local cards done
2015/01/03 10:33:49 0 s anti cascading disabled
2015/01/03 10:33:49 5A1AF8 c plain dvbapi-client granted (root, au=auto (1 reader))
2015/01/03 10:33:49 5A1AF8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
2015/01/03 10:33:51 5A1AF8 c [NEW ECMPID #0] CAID: 1833 ECM_PID: 180F PROVID: 000000
2015/01/03 10:33:51 5A1AF8 c [NEW ECMPID #1] CAID: 09C4 ECM_PID: 1B0F PROVID: 000000
2015/01/03 10:33:51 5A1AF8 c [NEW ECMPID #2] CAID: 09AF ECM_PID: 1F0F PROVID: 000000
2015/01/03 10:33:51 5A1AF8 c [NEW ECMPID #3] CAID: 098C ECM_PID: 1A0F PROVID: 000000
2015/01/03 10:33:51 5A1AF8 c Found 4 ECMpids and 2 STREAMpids in PMT
2015/01/03 10:33:51 5A1AF8 c [DVBAPI] Receiver wants to demux srvid 006C on adapter 0000 camask 0008 index 0003 pmtpid 0063
2015/01/03 10:33:51 5A1AF8 c New program number: 006C (1833:006C unknown) [pmt_list_management 3]
2015/01/03 10:33:51 5A1AF8 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0063 VPID 03FF
2015/01/03 10:33:51 590868 r V14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/01/03 10:33:51 590868 r V14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/01/03 10:33:51 590868 r V14 [videoguard2] classD3 ins54: no cw --> No tier found
2015/01/03 10:33:51 590868 r V14 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/01/03 10:33:51 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (83 ms) by V14
2015/01/03 10:33:51 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (3 ms) by V14
2015/01/03 10:33:52 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (4 ms) by V14
2015/01/03 10:33:52 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (3 ms) by V14
2015/01/03 10:33:53 0 --- Skipped 2 duplicated log lines ---
2015/01/03 10:33:53 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (4 ms) by V14
2015/01/03 10:33:53 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (3 ms) by V14
2015/01/03 10:33:53 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (4 ms) by V14
2015/01/03 10:33:53 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (3 ms) by V14
2015/01/03 10:33:54 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (4 ms) by V14
2015/01/03 10:33:54 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (3 ms) by V14
2015/01/03 10:33:54 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (4 ms) by V14
2015/01/03 10:33:54 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (3 ms) by V14
2015/01/03 10:33:55 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (4 ms) by V14
2015/01/03 10:33:55 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (3 ms) by V14
2015/01/03 10:33:56 0 --- Skipped 2 duplicated log lines ---
2015/01/03 10:33:56 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (4 ms) by V14
2015/01/03 10:33:56 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (3 ms) by V14
2015/01/03 10:33:56 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (4 ms) by V14
2015/01/03 10:33:56 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (3 ms) by V14
2015/01/03 10:33:57 590868 r V14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/01/03 10:33:57 590868 r V14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/01/03 10:33:57 590868 r V14 [videoguard2] classD3 ins54: no cw --> No tier found
2015/01/03 10:33:57 590868 r V14 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/01/03 10:33:57 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (63 ms) by V14
2015/01/03 10:33:57 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (3 ms) by V14
2015/01/03 10:33:57 5A1AF8 c root (098C&000000/0C20/006C/98:E36C7E3AAE5380581BBB065600A2723F): not found (4 ms) by V14

Grüße

 

[bombadil]

AW: Freischaltung V14

Moin,

hierzu

[dvbapi]
enabled = 1
au = 1
user = xxxx
boxtype = xxxxx

noch einen User anlegen

[account]
user = xxxx
au = V14
group = 1

Hat es einen Grund den Boxtype zu x-en?

Neustart nichtr vergessen

Grüße
Bombadil

 

[dodo83]

AW: Freischaltung V14

dein EMMLOGDIR ist so vollkommen falsch

[COLOR=#333333]emmlogdir = /var/log/emm.log[/COLOR]

nur den Pfad angeben

[COLOR=#333333]emmlogdir = /var/log/[/COLOR]

 

[onkelz6489]

AW: Freischaltung V14

Danke, ja ich habe hier zuviel ausgeXt, hast Recht.
Den user root gibt es auch in der oscam.user, das sollte also passen

Ist die Zeile so in Ordnung? Oder muss dass "emm.log" weg?
emmlogdir = /var/log/emm.log

Hast du eventuell eine Idee was der Kundenservice von mir dann wissen will?
Ich hab bei der S02 mal angerufen da lief das ganze ohne größere Unannehmlichkeiten ab, aber ich denke dass sich momentan die Anzahl der Freischaltungen doch deutlich erhöht hat....

- - - - - - - - - -

dein EMMLOGDIR ist so vollkommen falsch

[COLOR=#333333]emmlogdir = /var/log/emm.log[/COLOR]

nur den Pfad angeben

[COLOR=#333333]emmlogdir = /var/log/[/COLOR]

Da war wohl wer schneller als mein Hirn :emoticon-0178-rock:

Kannst du mir das eventuell erklären?
Denn den oscam-log-Pfad gibt man ja auch so an:

logfile = /tmp/oscam.log

Wsl weil sich das eine auf den File-Namen und das andere auf den Ort bezieht?

Grüße

 

[dodo83]

AW: Freischaltung V14

beim Logfile ist es auch richtig so, beim EMM log wird aber nur der Pfad angegeben

[h=5]logfile[/h]

Sie müssen registriert sein, um Links zu sehen.

Parameter ist optional
Mit diesem Parameter wird Name und Pfad und für das Logfile (mehrere sind nicht möglich) festgelegt, zusätzlich auch das Loggen in stdout oder syslog. Es ist auch möglich, das Loggen nur für stdout oder syslog festzulegen und somit keine Logdatei zu schreiben.


[h=5]emmlogdir[/h]

Sie müssen registriert sein, um Links zu sehen.

Parameter ist optional

Hier kann ein Pfad für EMM-Logging eingestellt werden. Welche EMMs mitgeloggt werden sollen, kann mit den "saveemm-*"-Parametern in der oscam.server detailliert eingestellt werden.

 

[onkelz6489]

AW: Freischaltung V14

Ok wieder was gelernt, danke.

Hast du bzgl Freischaltung noch eine Idee?
Will mich nicht ganz unvorbereitet ins Telefonat stürzen :emoticon-0144-nod:

Edit:
Noch eine Frage: Die Emm kommen dann in den Pfad
/var/log/

also muss ich sie dann auch dort suchen?
Ich habe mir jetzt immer gedacht ich muss den oscam.log durch das V14 Analyse Tool jagen?!

 

[bombadil]

AW: Freischaltung V14

Hi,

beim Oscam.log wird das Log in eine bestehende Datei geschrieben, oder, wenn nicht vorhanden, eine nach der Angabe beim Parameter logfile angelegt.

Emmlogdir schreibt eine, die sich aus dem Namen des Readerlabels und _unique_emm.log zusammensetzt.

Grüße
Bombadil