FAQ: CCcam/NewCS

[teresa17]

AW: FAQ: CCcam/NewCS

ich meine wie mein newcs und ccam einstellen muss für ein nds3 sky italia damit es mein karten leser es liest mein karten lesen ist ein multiprog 2000 und möchte das es in mein dbox2 mit zebra geht

 

[Phantom]

AW: FAQ: CCcam/NewCS

Erstmal musst du den Box key haben und in der Newcs eintragen. Dann erstelle ein User in der newcs oder nutze den vorhandenen Dummy und trage diese zugangsdaten un der CCcam.cfg ein.

Du kannst die NDS auch direkt im CCcam sharen. Dazu beachte diese Zeile

# NDS Boxkey ersetzen (4 Byte Hex)
#
# BOXKEY: <Pfad> <Byte1> <Byte2> <Byte3> <Byte4>
#
# Beispiel:
#
#BOXKEY: /dev/sci0 00 11 22 33

 

[teresa17]

AW: FAQ: CCcam/NewCS

ich habe den newcs und ccam so einstellt wie du es den ander border erklärt hast und bei kommt nur bind erro 98 und reset faild

 

[Phantom]

AW: FAQ: CCcam/NewCS

Teste mal meine Newcs.xml, diese läuft bei mir bestens

<newCSconfig>
<readers name="Card Readers">
<device>
<name>lower</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>


<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<device>
<name>upper</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>


<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>

<name>newcs</name>


<password>newcs</password>


<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user><name>dream</name><password>dream</password><hostname></hostname><port></port><au>yes</au><spider>no</spider><sidoverride>no</sidoverride><rate>2</rate></user>

</newcamdserver>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>192.168.178.30</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>

</newcamdserver>
</newCSconfig>

 

[teresa17]

AW: FAQ: CCcam/NewCS

sind einstellungen für extern reader für dbox2

 

[Phantom]

AW: FAQ: CCcam/NewCS

Das wäre der pfad zum Cardreader /dev/tts/0 Dieser muss unter node stehen.

 

[teresa17]

AW: FAQ: CCcam/NewCS

habe es grade versuch kommst reset faild card kann nicht gelesen werden wenn ich die raus mach kommst kein kart drin

 

[hutziche]

AW: FAQ: CCcam/NewCS

Hi,
bin anfänger und möchte meine s01 im multicam megakom v3 in dbox2 nokia zum laufen bekommen. hab alles was im thread steht duchprobiert und krieg die karte nicht zum laufen. die alte karte wird erkannt, bei der neuen bin ich am verzweifeln und brauche hilfe!!!

hier ein log von newcs mit alter und neuer s01:

This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 00:18:21 ] [ Box detect ] Box type 4 (Dbox2)
[ 00:18:21 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, defaulting to NO
[ 00:18:21 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipping...
[ 00:18:21 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skipping...
[ 00:18:21 ] [ Config ] Pincode for device 0 (Multicam): 0000
[ 00:18:21 ] [ Config ] /dev/tts/1 ECM priority: round
[ 00:18:21 ] [ EMM Cache ] Initialising dynamic Cache
[ 00:18:21 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 256
[ 00:18:21 ] [ Loader ] Starting Telnet on port 1001
[ 00:18:21 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:18:21 ] [ Dbox ] Opening device /dev/tts/1
[ 00:18:21 ] bind: error! 98: Address already in use
[ 00:18:22 ] [ Loader ] Unknown card
[ 00:18:22 ] [ Loader ] Trying Irdeto (T=14)
[ 00:18:22 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:18:22 ] [ Dbox ] Opening device /dev/tts/1
[ 00:18:24 ] [ ATR ] T=14  1etu=104.17us  Guardtime:17etu  WWT:9600etu
[ 00:18:24 ] [ ATR ] Historical bytes: I R D E T O   A C S [03] [83] [95] [00] [80]
[ 00:18:24 ] [ Loader ] Init Irdeto card
[ 00:18:25 ] [ Keyman ] Adding key 000000008387db type 0 on Provider 000000 for caid 1702 ID=0
[ 00:18:25 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000000 for caid 1702 ID=0
[ 00:18:25 ] [ Keyman ] Skipping duplicate irdeto
[ 00:18:25 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000001 for caid 1702 ID=1
[ 00:18:25 ] [ Keyman ] Skipping duplicate irdeto
[ 00:18:25 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000002 for caid 1702 ID=2
[ 00:18:26 ] [ Keyman ] Skipping duplicate irdeto
[ 00:18:26 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000003 for caid 1702 ID=3
[ 00:18:26 ] [ Loader ] Card 1702 on port /dev/tts/1 ready
[ 00:18:26 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:18:26 ] [ Newcamd ] Newcamd thread Server started on port 10000
[ 00:18:26 ] bind: error! 98: Address already in use
[ 00:18:26 ] [ NewCS ] Ready to GO! :)
/var # newcs
This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 00:18:51 ] [ Box detect ] Box type 4 (Dbox2)
[ 00:18:51 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, defaulting to NO
[ 00:18:51 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipping...
[ 00:18:51 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skipping...
[ 00:18:51 ] [ Config ] Pincode for device 0 (Multicam): 0000
[ 00:18:51 ] [ Config ] /dev/tts/1 ECM priority: round
[ 00:18:51 ] [ EMM Cache ] Initialising dynamic Cache
[ 00:18:51 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 262
[ 00:18:51 ] [ Loader ] Starting Telnet on port 1001
[ 00:18:51 ] bind: error! 98: Address already in use
[ 00:18:51 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:18:51 ] [ Dbox ] Opening device /dev/tts/1
[ 00:18:53 ] [ Loader ] Reset failed ...
[ 00:18:54 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:18:56 ] [ NewCS ] Ready to GO! :)
/var # [ 00:18:56 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:18:56 ] [ Dbox ] Opening device /dev/tts/1
[ 00:18:57 ] [ Loader ] Reset failed ...
[ 00:18:57 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:18:59 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:18:59 ] [ Dbox ] Opening device /dev/tts/1
[ 00:19:00 ] [ Loader ] Reset failed ...
[ 00:19:00 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:19:02 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:19:02 ] [ Dbox ] Opening device /dev/tts/1
[ 00:19:03 ] [ Loader ] Reset failed ...
[ 00:19:03 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:19:05 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:19:05 ] [ Dbox ] Opening device /dev/tts/1
[ 00:19:06 ] [ Loader ] Reset failed ...
[ 00:19:06 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:19:08 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:19:08 ] [ Dbox ] Opening device /dev/tts/1
[ 00:19:09 ] [ Loader ] Reset failed ...
[ 00:19:09 ] [ Loader ] Starting Newcamd Server on port 10000

 

[sdxxl]

AW: FAQ: CCcam/NewCS

In der Freetz Firmware ist noch kein CCcam vertreten.

Brauch ich in der Fritzbox überhaupt die cccam zum cardsharen? Reicht es nicht wenn newcs läuft und ich die Benutzerdaten der DBoxen (cccam) in der NewCS.xml eintrage?

 

[Phantom]

AW: FAQ: CCcam/NewCS

habe es grade versuch kommst reset faild card kann nicht gelesen werden wenn ich die raus mach kommst kein kart drin

Ändere mal die Taktfrequenz

Hi,
bin anfänger und möchte meine s01 im multicam megakom v3 in dbox2 nokia zum laufen bekommen. hab alles was im thread steht duchprobiert und krieg die karte nicht zum laufen. die alte karte wird erkannt, bei der neuen bin ich am verzweifeln und brauche hilfe!!!

hier ein log von newcs mit alter und neuer s01:

This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 00:18:21 ] [ Box detect ] Box type 4 (Dbox2)
[ 00:18:21 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, defaulting to NO
[ 00:18:21 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipping...
[ 00:18:21 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skipping...
[ 00:18:21 ] [ Config ] Pincode for device 0 (Multicam): 0000
[ 00:18:21 ] [ Config ] /dev/tts/1 ECM priority: round
[ 00:18:21 ] [ EMM Cache ] Initialising dynamic Cache
[ 00:18:21 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 256
[ 00:18:21 ] [ Loader ] Starting Telnet on port 1001
[ 00:18:21 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:18:21 ] [ Dbox ] Opening device /dev/tts/1
[ 00:18:21 ] bind: error! 98: Address already in use
[ 00:18:22 ] [ Loader ] Unknown card
[ 00:18:22 ] [ Loader ] Trying Irdeto (T=14)
[ 00:18:22 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:18:22 ] [ Dbox ] Opening device /dev/tts/1
[ 00:18:24 ] [ ATR ] T=14  1etu=104.17us  Guardtime:17etu  WWT:9600etu
[ 00:18:24 ] [ ATR ] Historical bytes: I R D E T O   A C S [03] [83] [95] [00] [80]
[ 00:18:24 ] [ Loader ] Init Irdeto card
[ 00:18:25 ] [ Keyman ] Adding key 000000008387db type 0 on Provider 000000 for caid 1702 ID=0
[ 00:18:25 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000000 for caid 1702 ID=0
[ 00:18:25 ] [ Keyman ] Skipping duplicate irdeto
[ 00:18:25 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000001 for caid 1702 ID=1
[ 00:18:25 ] [ Keyman ] Skipping duplicate irdeto
[ 00:18:25 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000002 for caid 1702 ID=2
[ 00:18:26 ] [ Keyman ] Skipping duplicate irdeto
[ 00:18:26 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000003 for caid 1702 ID=3
[ 00:18:26 ] [ Loader ] Card 1702 on port /dev/tts/1 ready
[ 00:18:26 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:18:26 ] [ Newcamd ] Newcamd thread Server started on port 10000
[ 00:18:26 ] bind: error! 98: Address already in use
[ 00:18:26 ] [ NewCS ] Ready to GO! :)
/var # newcs
This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 00:18:51 ] [ Box detect ] Box type 4 (Dbox2)
[ 00:18:51 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, defaulting to NO
[ 00:18:51 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipping...
[ 00:18:51 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skipping...
[ 00:18:51 ] [ Config ] Pincode for device 0 (Multicam): 0000
[ 00:18:51 ] [ Config ] /dev/tts/1 ECM priority: round
[ 00:18:51 ] [ EMM Cache ] Initialising dynamic Cache
[ 00:18:51 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 262
[ 00:18:51 ] [ Loader ] Starting Telnet on port 1001
[ 00:18:51 ] bind: error! 98: Address already in use
[ 00:18:51 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:18:51 ] [ Dbox ] Opening device /dev/tts/1
[ 00:18:53 ] [ Loader ] Reset failed ...
[ 00:18:54 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:18:56 ] [ NewCS ] Ready to GO! :)
/var # [ 00:18:56 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:18:56 ] [ Dbox ] Opening device /dev/tts/1
[ 00:18:57 ] [ Loader ] Reset failed ...
[ 00:18:57 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:18:59 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:18:59 ] [ Dbox ] Opening device /dev/tts/1
[ 00:19:00 ] [ Loader ] Reset failed ...
[ 00:19:00 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:19:02 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:19:02 ] [ Dbox ] Opening device /dev/tts/1
[ 00:19:03 ] [ Loader ] Reset failed ...
[ 00:19:03 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:19:05 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:19:05 ] [ Dbox ] Opening device /dev/tts/1
[ 00:19:06 ] [ Loader ] Reset failed ...
[ 00:19:06 ] [ Loader ] Starting Newcamd Server on port 10000
[ 00:19:08 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 00:19:08 ] [ Dbox ] Opening device /dev/tts/1
[ 00:19:09 ] [ Loader ] Reset failed ...
[ 00:19:09 ] [ Loader ] Starting Newcamd Server on port 10000

Hast du ein Multicam oder Cardreader dran???

Brauch ich in der Fritzbox überhaupt die cccam zum cardsharen? Reicht es nicht wenn newcs läuft und ich die Benutzerdaten der DBoxen (cccam) in der NewCS.xml eintrage?

Das Newcs reich aus. Du kannst mit den Client Resis mit dem CCcam darauf zugreifen.

 

[hutziche]

AW: FAQ: CCcam/NewCS

soll ich am multicam oder in der newcs die frequenz ändern???

 

[Phantom]

AW: FAQ: CCcam/NewCS

Bei dir wollte ich wissen ob du ein MC nutzen tust.

 

[hutziche]

AW: FAQ: CCcam/NewCS

klaro, ein megakom v3, steht auch oben!

muss jetzt ins Bett, sonst krieg ich morgenfrüh die glotzer net auf.
meld mich morgen abend noch mal.

Gruß s01 geplagter

 

[sdxxl]

AW: FAQ: CCcam/NewCS

Das Newcs reich aus. Du kannst mit den Client Resis mit dem CCcam darauf zugreifen.

@Phanton!

Danke für Deine Erklärung, jetzt ist bei mir der "Groschen" gefallen. Bitte korrigiere mich wenn ich falsch liege.

Cardsharing mit Dbox2 Multicam:
Ich brauche cardserver (NewCS) und emu (Cccam), weil die Dbox nicht nur die Kartendaten verteilt, sondern gleichzeitig auch ein Bild auf dem angeschlossenen Fernseher entschlüsseln muss.

Cardsharing mit Fritzbox und angeschlossenem Reader:
Ich brauche nur den cardserver (NewCS) und keinen Emu (Cccam), weil die Fritzbox kein Bild entschlüsseln muss und nur die Kartendaten verteilt.

Übrigens: Ich nehme an, dass es mit MPCS auf der Fritzbox gleich funktioniert.

 

[Phantom]

AW: FAQ: CCcam/NewCS

Ich kenne leider nicht jede Bezeichnung der vielen arten an MC. Ich nehme mal stark an das du die NDS Sharen möchtest. Teste mal die folgende newcs.xml aus. Bei nd1 soll NDS laufen.

<?xml version="1.0"?>
<newCSconfig>
<readers name="Multicam">
<device>
<name>Multicam</name>
<type>Multicam</type>
<mhz>357</mhz>
<node>/dev/tts/1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>00000000</boxkey>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>10000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>admin</name>
<password>password</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<mode>simple</mode>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>newcs</name>
<password>password</password>
<hostname>localhost</hostname>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
</newcamdserver>
</newCSconfig>