externer Card Reader V14 funktioniert nicht!

[dodo83]

AW: externer Card Reader V14 funktioniert nicht!

probier mal bei dir die cccam versionsnummer zu ändern

[COLOR=#333333][cccam][/COLOR]
[COLOR=#333333]port = 12659[/COLOR]
[COLOR=#333333]reshare = 2[/COLOR]
[COLOR=#ff0000]version = 2.3.0[/COLOR]

oder auf der Dbox mal oscam laufen lassen

 

[Grunii]

AW: externer Card Reader V14 funktioniert nicht!

Hey,

nach langen hin un her habe ich es wieder einmal mit dem Thema zu beschäftigen!
Ich habe nun OSCAM auf der Client Box installiert. Die Box hat zum Server verbunden, Daten werden auch gesendet (siehe Log)!

Leider funktioniert das Entschlüsseln noch nicht!

OSCAM.SERVER

Spoiler

[reader]
label = server1
enable = 1
protocol = cccam
device = dyndns.biz,XXXXX
user = XXXXX
password = XXXXX
group = 3

OSCAM.CONF

Spoiler

[dvbapi]
enabled = 1
user = local


[webif]
httpport = 12001
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
httpreadonly = 1

oscam.user

Spoiler

[account]user = local
group = 3

OSCAM.LOG

Spoiler

2013/10/08 22:18:34 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8917 (powerpc-tuxbox-linux-gnu)
2013/10/08 22:18:34 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1640
2013/10/08 22:18:34 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2013/10/08 22:18:34 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/10/08 22:18:34 0 s signal handling initialized
2013/10/08 22:18:34 0 s Binary without Griffin module - no EMM processing for Griffin possible!
2013/10/08 22:18:34 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2013/10/08 22:18:34 0 s server1 [cccam] creating thread for device grunii89.dyndns.biz
2013/10/08 22:18:34 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/10/08 22:18:34 0 s waiting for local card init
2013/10/08 22:18:34 100DD1C8 h webif: decompressed 53268 bytes back into 152828 bytes
2013/10/08 22:18:34 100DD1C8 h HTTP Server running. ip=0.0.0.0 port=12001
2013/10/08 22:18:34 100E59F8 p ######.dyndns.biz: resolved ip=XXX.XXX.XXX.XXX
2013/10/08 22:18:34 100E59F8 p server1 [cccam] connecting to dynns
2013/10/08 22:18:35 100E59F8 p server1 [cccam] proxy initialized, server grunii89.dyndns.biz:12659
2013/10/08 22:18:35 0 s init for all local cards done
2013/10/08 22:18:35 0 s anti cascading disabled
2013/10/08 22:18:35 100F2D50 c plain dvbapi-client granted (local, au=off)
2013/10/08 22:18:35 100F2D50 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
2013/10/08 22:18:35 100F2D50 c [DVBAPI] Receiver sends PMT command 3 for channel 0011
2013/10/08 22:18:35 100F2D50 c [ADD PID 0] CAID: 1702 ECM_PID: 1700 PROVID: 000000
2013/10/08 22:18:35 100F2D50 c [ADD PID 1] CAID: 1833 ECM_PID: 1800 PROVID: 000000
2013/10/08 22:18:35 100F2D50 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B00 PROVID: 000000
2013/10/08 22:18:35 100F2D50 c [ADD PID 3] CAID: 09AF ECM_PID: 1F00 PROVID: 000000
2013/10/08 22:18:35 100F2D50 c [ADD PID 4] CAID: 098C ECM_PID: 1A00 PROVID: 000000
2013/10/08 22:18:35 100F2D50 c Found 5 ECMpids and 3 STREAMpids in PMT
2013/10/08 22:18:35 100F2D50 c [DVBAPI] Receiver wants to demux srvid 0011 on adapter 0000 camask 0001 index 0000
2013/10/08 22:18:35 100F2D50 c New program number: 0011 (1702:0011 unknown) [pmt_list_management 3]
2013/10/08 22:18:35 100F2D50 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A00 ANY CHID VPID 00FF
2013/10/08 22:18:35 100F2D50 c ERROR: Can't open device /dev/dvb/adapter0/ca0 (errno=16 Device or resource busy)
2013/10/08 22:18:35 0 --- Skipped 3 duplicated log lines ---
2013/10/08 22:18:35 100F2D50 c local (098C&000000/0068/0011/984F9853F68457C2025B4EC24F9C722AD): found (256 ms) by server1
2013/10/08 22:18:41 100F2D50 c ERROR: Can't open device /dev/dvb/adapter0/ca0 (errno=16 Device or resource busy)
2013/10/08 22:18:41 100F2D50 c local (098C&000000/0068/0011/98:16172269708AA30F04F0C86C0B0DD68B): found (231 ms) by server1
2013/10/08 22:18:48 100F2D50 c ERROR: Can't open device /dev/dvb/adapter0/ca0 (errno=16 Device or resource busy)
2013/10/08 22:18:48 100F2D50 c local (098C&000000/0068/0011/98:16D9FC5841AF533688F1E588ACFD1B6C): found (236 ms) by server1

Kann ja eigentlich nicht mehr viel sein

vielen Dank schonmal!

Sie müssen registriert sein, um Links zu sehen.

 

[modino2711]

AW: externer Card Reader V14 funktioniert nicht!

trag mal in oscam.server und oscam.user noch die caid von deiner karte ein.

 

[Grunii]

AW: externer Card Reader V14 funktioniert nicht!

Leider immer noch das selbe Problem....

 

[spaceflip]

AW: externer Card Reader V14 funktioniert nicht!

Beende mal alle Oscam-Prozesse und starte Oscam neu, irgendwas blockiert da deinen Adapter.

 

[modino2711]

AW: externer Card Reader V14 funktioniert nicht!

(errno=16 Device or resource busy)

womit ist den dein gerät da beschäftigt, mal oscam neu gestartet ?

 

[Grunii]

AW: externer Card Reader V14 funktioniert nicht!

Beende mal alle Oscam-Prozesse und starte Oscam neu, irgendwas blockiert da deinen Adapter.

ach ich hatte mir cccam so als emu nochmal runtergeladen, dass es es blockiert! Hab aber immer noch kein Bild! Log sieht aber schon viel besser aus:

Spoiler

2013/10/08 22:50:00 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8917 (powerpc-tuxbox-linux-gnu)
2013/10/08 22:50:00 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2217
2013/10/08 22:50:00 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2013/10/08 22:50:00 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/10/08 22:50:00 0 s signal handling initialized
2013/10/08 22:50:00 0 s Binary without Griffin module - no EMM processing for Griffin possible!
2013/10/08 22:50:00 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2013/10/08 22:50:00 0 s server1 [cccam] creating thread for device XXX
2013/10/08 22:50:00 100DD1C8 h webif: decompressed 53268 bytes back into 152828 bytes
2013/10/08 22:50:00 100DD1C8 h HTTP Server running. ip=0.0.0.0 port=12001
2013/10/08 22:50:00 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/10/08 22:50:00 0 s waiting for local card init
2013/10/08 22:50:00 100E59F8 p server1 [cccam] connecting to XXXXX
2013/10/08 22:50:00 100E59F8 p server1 [cccam] proxy initialized, server XXXXX
2013/10/08 22:50:00 0 s init for all local cards done
2013/10/08 22:50:00 0 s anti cascading disabled
2013/10/08 22:50:00 100F2D38 c plain dvbapi-client granted (local, au=off)
2013/10/08 22:50:00 100F2D38 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
2013/10/08 22:50:00 100F2D38 c [DVBAPI] Receiver sends PMT command 3 for channel 00DD
2013/10/08 22:50:00 100F2D38 c [ADD PID 0] CAID: 1702 ECM_PID: 176A PROVID: 000000
2013/10/08 22:50:00 100F2D38 c [ADD PID 1] CAID: 1833 ECM_PID: 186A PROVID: 000000
2013/10/08 22:50:00 100F2D38 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B6A PROVID: 000000
2013/10/08 22:50:00 100F2D38 c [ADD PID 3] CAID: 09AF ECM_PID: 1F6A PROVID: 000000
2013/10/08 22:50:00 100F2D38 c [ADD PID 4] CAID: 098C ECM_PID: 1A6A PROVID: 000000
2013/10/08 22:50:00 100F2D38 c Found 5 ECMpids and 3 STREAMpids in PMT
2013/10/08 22:50:00 100F2D38 c [DVBAPI] Receiver wants to demux srvid 00DD on adapter 0000 camask 0001 index 0000
2013/10/08 22:50:00 100F2D38 c New program number: 00DD (1702:00DD unknown) [pmt_list_management 3]
2013/10/08 22:50:00 100F2D38 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A6A ANY CHID VPID 07FF
2013/10/08 22:50:01 100F2D38 c local (098C&000000/0196/00DD/98:C20C946D491E1B0359B9790912D605C0): found (53 ms) by server1
2013/10/08 22:50:05 100F2D38 c local (098C&000000/0196/00DD/98:012E7A612FC9280EA1F52680B80C1B22): found (221 ms) by server1
2013/10/08 22:50:12 100F2D38 c local (098C&000000/0196/00DD/98:E0209878C62B8B2D200CDB2B841F9759): found (230 ms) by server1

 

[modino2711]

AW: externer Card Reader V14 funktioniert nicht!

[dvbapi]
enabled = 1
user = local
boxtype = dbox2

trag das mal noch ein, wenn ich richtig gesehen hab war das doch ne ? dbox2 ?

 

[Grunii]

AW: externer Card Reader V14 funktioniert nicht!

sehr gut
das war es! Supi!
wegen solchen Kleinigkeiten ^^

 

[modino2711]

AW: externer Card Reader V14 funktioniert nicht!

da musst du schon drauf achten

boxtype
Parameter wird benötigt

oder

Parameter ist optional

du siehst es ja welche wirkung da rauskommt !

 

[Grunii]

AW: externer Card Reader V14 funktioniert nicht!

Hallo Ihr Lieben,

ich habe mal wieder ein Problem! Gestern habe ich mein Image auf dem Server neu installiert, da ich nicht mehr auf meine Dreambox verbinden konnte! Seitdem funktioniet leider das Sat-Sharing nicht mehr! Die Karte kann nicht mehr aktiviert werden! Ich habe bereits die Karte im Receiver getestet, funktioniert alles tatelos! An den Configs habe ich nichts geändert! Kabel funktioniert noch ohne Probleme, wobei ich hier auf HD umsteigen wollte! Sky Bundesliga HD funktioniert auch Problemlos, nach dem ich die services erweitert habe, Sky Sport HD bleibt aber Schwarz!

Hier noch einmal meine Configs:

oscam.services

Spoiler

#Sky DE Komplett mit HD[skyallsat]
caid = 098C
srvid = 0008,0009,000A,000B,000C,000D,000E,0010,0011,0013,0014,0015,0016,0017,0018,0019,001A,001B,001C,001D,0021,0022,0023,0024,0025,0026,0027,0029,002A,002B,0032,0034,001E,0037,0038,0039,003A,003C,003D,003E,003F,0040,0041,0042,0043,0044,0046,0069,0070,0071,0072,0073,006A,006B,006C,,006D,006E,006F,006D,0066,0074,0075,0076,0077,0078,0079,007A,007B,007C,007D,007E,007F,0080,0081,0082,0083,0084,00A8,00DD,00DE,00DF,00FB,00F2,00FC,00FD,00FE,0105,0106,0107,010F,0110,0111,0119,011A,011B,0123,0124,0125,012D,012E,012F,0137,0138,0139,0141,0142,0143,014B,014C,014D,014E,0156,0159,0160,0163,016B,016D,0175,0201,0203,0204,0206,07FF,2EFE,3331,4461,4462,6FB8,6FF1,7001,7009,700A,013E,0148,015C,010E,0118,0122,012C,0136,0140,014A,0154,0104


#Sky DE komplett Kabel Deutschland
[skyallKD]
caid = 09C7
srvid = 000A,000B,002B,0029,0009,0014,0204,0008,0203,0019,0083,006F,0082,0071,0070,EF14,0084,0EE6,006A,006B,006C,0072,002A,0024,0017,0032,001D,001B,0021,0022,0023,0025,0026,0027,001C,0013,001A,000E,000D,000C,00A8,0206,0016,0018,0034,0015,00DF,0106,0110,011A,0124,012E,0138,0142,014C,0156,0160,00FC,003C,003D,2EFE,4461,4462,003F,003E,3393,0038,003A,0042,0040,700A,0044,0043,0043,6FF1,7009,3331,3395,001E,0096,0097,0098,0099,009A,009B,009C,0015,0201,0159,0163,016D,0046,0011,00DD,00DE,00FD,014D,0143,0139,012F,0125,011B,0107,0111,016B,0175






[bundesliga]
caid = 09C7,1722,1834,1801,1861
provid = 000401,000000
srvid = 0069,010B,0115


[sport]
caid = 09C7,1722,1834,1801,1861
provid = 000401,000000
srvid = 0081,0072,010C,0116,0120,010E,0118,0122

oscam.server

Spoiler

[reader]
label = G02
enable = 1
protocol = internal
device = /dev/sci0
services =
caid = 09C7
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
ident =
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100
services = skyallKD,skyfullhd,bundesliga, sport








[reader]
label = v14
protocol = smargo
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 369
cardmhz = 369
group = 3
emmcache = 1,3,2
services = skyallsat

Oscam.conf

Spoiler

#
# main configuration
#


[global]
nice = -1
WaitForCards = 1


[monitor]
port = 988
aulow = 120
monlevel = 4






[newcamd]
key = 0102030405060708091011121314
port = 34001@09c7:000000


[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox




[cccam]
port = 12659
reshare = 2
version = 2.3.0


[cs357x]
port = 25000

oscam log

Spoiler

2014/01/16 18:54:20 0 s monitor: initialized (fd=6, port=988)
2014/01/16 18:54:20 0 s camd35: initialized (fd=7, port=25000)
2014/01/16 18:54:20 0 s cs378x: disabled
2014/01/16 18:54:20 0 s newcamd: initialized (fd=8, port=34001, crypted)
2014/01/16 18:54:20 0 s -> CAID: 09C7 PROVID: 000000
2014/01/16 18:54:20 0 s cccam: initialized (fd=9, port=12659, crypted)
2014/01/16 18:54:20 0 s radegast: disabled
2014/01/16 18:54:20 0 s http thread started
2014/01/16 18:54:20 0 s reader check thread started
2014/01/16 18:54:20 0 s check thread started
2014/01/16 18:54:20 0 s creating thread for device /dev/sci0
2014/01/16 18:54:20 0 s creating thread for device /dev/ttyUSB0
2014/01/16 18:54:20 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/01/16 18:54:20 0 s waiting for local card init
2014/01/16 18:54:20 5591F0 h HTTP Server listening on port 12001
2014/01/16 18:54:20 556200 r reader g02 initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2014/01/16 18:54:20 5579F8 r smargo init
2014/01/16 18:54:20 5579F8 r reader v14 initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369)
2014/01/16 18:54:21 0 g02 card detected
2014/01/16 18:54:21 0 v14 card detected
2014/01/16 18:54:22 556200 r ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/01/16 18:54:23 556200 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2014/01/16 18:54:25 556200 r [videoguard2-reader] parental lock setting: FF FF FF FF
2014/01/16 18:54:25 556200 r [videoguard2-reader] type: VideoGuard Kabel Deutschland (09C7), caid: 09C7
2014/01/16 18:54:25 556200 r [videoguard2-reader] serial: 29C1D059, BoxID: 12345678, baseyear: 2004
2014/01/16 18:54:25 556200 r [videoguard2-reader] ready for requests
2014/01/16 18:54:25 556200 r found cardsystem videoguard2
2014/01/16 18:54:25 556200 r [videoguard2-reader] g02 card detected
2014/01/16 18:54:25 556200 r [videoguard2-reader] type: VideoGuard Kabel Deutschland (09C7)
2014/01/16 18:54:25 556200 r [videoguard2-reader] tier: 005e, expiry date: 2014/03/13-00:00:00
2014/01/16 18:54:25 556200 r [videoguard2-reader] tier: 007b, expiry date: 2014/03/13-00:00:00
2014/01/16 18:54:25 556200 r [videoguard2-reader] tier: 007d, expiry date: 2014/03/13-00:00:00
2014/01/16 18:54:25 556200 r [videoguard2-reader] tier: 0081, expiry date: 2014/03/13-00:00:00
2014/01/16 18:54:25 556200 r [videoguard2-reader] tier: 008e, expiry date: 2014/03/13-00:00:00
2014/01/16 18:54:25 556200 r [videoguard2-reader] tier: 00c7, expiry date: 2014/03/13-00:00:00
2014/01/16 18:54:26 556200 r [videoguard2-reader] tier: 00c9, expiry date: 2014/03/13-00:00:00
2014/01/16 18:54:26 556200 r [videoguard2-reader] tier: 00e4, expiry date: 2014/03/13-00:00:00
2014/01/16 18:54:26 556200 r [videoguard2-reader] tier: 00f3, expiry date: 2014/03/13-00:00:00
2014/01/16 18:54:26 556200 r [videoguard2-reader] tier: 00f4, expiry date: 2014/03/13-00:00:00
2014/01/16 18:54:26 556200 r [videoguard2-reader] tier: 00fa, expiry date: 2014/03/13-00:00:00
2014/01/16 18:54:26 556200 r [videoguard2-reader] tier: 00fe, expiry date: 2014/03/13-00:00:00
2014/01/16 18:54:26 556200 r [videoguard2-reader] tier: 00ff, expiry date: 2014/03/13-00:00:00
2014/01/16 18:54:26 556200 r [videoguard2-reader] tier: 012d, expiry date: 2014/04/06-00:00:00
2014/01/16 18:54:29 5579F8 r Error activating card.
2014/01/16 18:54:37 5579F8 r Error activating card.
2014/01/16 18:54:46 5579F8 r Error activating card.

Ich hoffe ihr könnt mir helfen!

LG

 

[Grunii]

Ich habe ein bisschen rumprobiert! Nocheinmal neues Image und OSCAM installiert! Die V14 funktioniert jetzt allerdings findet die G02 keine entitlements mehr welche sich im internen Kartenslot befindet!

Könnt ihr mir helfen???

Hier der LOG:

Spoiler

2014/01/17 17:50:02 50CE58 r G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2014/01/17 17:50:02 50EB58 r v14 [smargo] smargo init
2014/01/17 17:50:02 50EB58 r v14 [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369)
2014/01/17 17:50:03 50CE58 r G02 [internal] card detected
2014/01/17 17:50:03 50EB58 r v14 [smargo] card detected
2014/01/17 17:50:04 50CE58 r G02 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/01/17 17:50:04 50CE58 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/01/17 17:50:04 50CE58 r G02 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/01/17 17:50:04 50CE58 r G02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/01/17 17:50:06 50CE58 r G02 [internal] card system not supported
2014/01/17 17:50:06 50CE58 r G02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/01/17 17:50:07 50CE58 r G02 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/01/17 17:50:07 50CE58 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/01/17 17:50:07 50CE58 r G02 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/01/17 17:50:07 50CE58 r G02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/01/17 17:50:07 50EB58 r v14 [smargo] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/01/17 17:50:07 50EB58 r v14 [smargo] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/01/17 17:50:07 50EB58 r v14 [smargo] Calculated work ETU is 6.30 us reader mhz = 369
2014/01/17 17:50:08 50EB58 r v14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.69 MHz (specified in reader->mhz)
2014/01/17 17:50:08 50CE58 r G02 [internal] card system not supported
2014/01/17 17:50:08 50CE58 r G02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/01/17 17:50:08 50CE58 r G02 [internal] card initializing error
2014/01/17 17:50:09 50EB58 r v14 [smargo] Card type: P1TV
2014/01/17 17:50:09 50EB58 r v14 [smargo] Rom version: 20AA
2014/01/17 17:50:09 50EB58 r v14 [smargo] parental lock setting: FF FF FF FF
2014/01/17 17:50:09 50EB58 r v14 [smargo] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/01/17 17:50:09 50EB58 r v14 [smargo] serial: ########, BoxID: ########, baseyear: 2004
2014/01/17 17:50:09 50EB58 r v14 [smargo] ready for requests
2014/01/17 17:50:09 50EB58 r v14 [smargo] found card system videoguard2
2014/01/17 17:50:09 50EB58 r v14 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/01/17 17:50:09 50EB58 r v14 [videoguard2] card detected
2014/01/17 17:50:09 50EB58 r v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/01/17 17:50:10 50EB58 r v14 [videoguard2] tier: 0046, expiry date: 2014/03/31-01:00:00
2014/01/17 17:50:10 50EB58 r v14 [videoguard2] tier: 007b, expiry date: 2014/03/31-01:00:00
2014/01/17 17:50:10 50EB58 r v14 [videoguard2] tier: 007d, expiry date: 2014/03/31-01:00:00
2014/01/17 17:50:10 50EB58 r v14 [videoguard2] tier: 0081, expiry date: 2014/03/31-01:00:00
2014/01/17 17:50:10 50EB58 r v14 [videoguard2] tier: 008e, expiry date: 2014/03/31-01:00:00
2014/01/17 17:50:10 50EB58 r v14 [videoguard2] tier: 00c0, expiry date: 2014/03/31-01:00:00
2014/01/17 17:50:10 50EB58 r v14 [videoguard2] tier: 00c7, expiry date: 2014/03/31-01:00:00
2014/01/17 17:50:10 50EB58 r v14 [videoguard2] tier: 00c9, expiry date: 2014/03/31-01:00:00
2014/01/17 17:50:10 50EB58 r v14 [videoguard2] tier: 00f3, expiry date: 2014/03/31-01:00:00
2014/01/17 17:50:10 50EB58 r v14 [videoguard2] tier: 00fa, expiry date: 2014/03/31-01:00:00

 

[dodo83]

AW: externer Card Reader V14 funktioniert nicht!

morgen,
welche oscam version nutzt du jetzt?

bei den neueren muss man die mhz/cardmhz für den internen reader anpassen -> https://www.digital-eliteboard.com/...Karten/page5&p=2091877&viewfull=1#post2091877

 

[Grunii]

Re: AW: externer Card Reader V14 funktioniert nicht!

danke dir! Bin jetzt im Urlaub... ich werd es am Sonntag sofort probieren und euch berichten!

Benutze aber jetzt die 9044... also sehr wahrscheinlich das es daran liegt

 

[Grunii]

AW: Re: AW: externer Card Reader V14 funktioniert nicht!

Sehr gut funktioniert wieder alles!!! Sky Bundesliga HD funktioniert auch! Hab ich die Services hinzugefügt! Sky Sport HD funktioniert leider nicht! Da kommt immer folgende Fehlermeldung:

Spoiler

2014/01/31 15:15:22 52F380 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/01/31 15:15:22 52F380 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/31 15:15:23 52F380 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/01/31 15:15:23 52F380 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/31 15:15:23 549228 c max (09C7&000000/0686/00DF/A9:2AD8B4E0B0B5B5A8DF980236F140AF5A): found (370 ms) by G02
2014/01/31 15:15:23 52F380 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/01/31 15:15:23 52F380 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/31 15:15:24 52F380 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/01/31 15:15:24 52F380 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/31 15:15:24 52F380 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/01/31 15:15:25 52F380 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/31 15:15:25 52F380 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/01/31 15:15:25 52F380 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/31 15:15:26 52F380 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/01/31 15:15:26 52F380 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

Hab alle Services ausprobiert! Ohne Erfolg! oder liegt es an etwas anderen!


LG