externer Card Reader V14 funktioniert nicht!

[Grunii]

Hallo ihr lieben,

ich habe meinen alten Artikel (schon sehr lange her) nicht mehr gefunden, darum mach ich mal ein neues Thema auf.
Seit neuesten funktioniert ja nun das sharen von Kabel zu Sat nicht mehr. Darum habe ich mir ein Sky Sat Abo besorgt und einen externen Kartenleser gekauft.
Diesen habe ich konfiguriert und an meine Dreambox 800HD angeschlossen. Ziel ist es jetzt im internen Kartenslot Sky zu schauen und über den externen die Daten zu den Sat Benutzern zu senden.

Leider funktioniert das noch nicht. Sobald ich beide Karten in der Dreambox habe, läuft nicht einmal mehr das normale Bild. Ziehe ich die Sat-Karte aus dem externen Kartenschacht ist das Bild wieder da.

Woran könnte das liegen?

meine Settings:

oscam.server

Spoiler

## reader configuration
#


[reader]
label = G02
enable = 1
protocol = internal
device = /dev/sci0
services =
caid = 09C7
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
ident =
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100










[reader]
label = v14
protocol = smargo
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
detect = cd
mhz = 369
cardmhz = 369
group = 3
emmcache = 1,3,2

oscam.conf

Spoiler

## main configuration
#


[global]
nice = -1
WaitForCards = 1


[monitor]
port = 988
aulow = 120
monlevel = 4


[webif]
httpport = 12001
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns =
httpreadonly = 1






[newcamd]
key = 0102030405060708091011121314
port = 34001@09c7:000000


[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox




[cccam]
port = 12659
reshare = 2
version = 2.1.4

oscam.user

Spoiler

# user configuration
#
[account]
user = local
pwd =
group = 1
monlevel = 4
au = 1




[account]
user = mustermann
pwd = password
monlevel = 4
group = 3
#au = Sky

OSCAM.LOG

Spoiler

2013/09/12 15:01:33 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #5882 (mipsel-oe-linux)
2013/09/12 15:01:33 0 s version=1.20-unstable_svn, build #5882, system=mipsel-oe-linux, nice=-1
2013/09/12 15:01:33 0 s client max. idle=120 sec, debug level=0
2013/09/12 15:01:33 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2013/09/12 15:01:33 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2013/09/12 15:01:33 0 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2013/09/12 15:01:33 0 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2013/09/12 15:01:33 0 s signal handling initialized (type=sysv)
2013/09/12 15:01:33 0 s can't open file "/etc/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2013/09/12 15:01:33 0 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2013/09/12 15:01:33 0 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2013/09/12 15:01:33 0 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2013/09/12 15:01:33 0 s monitor: initialized (fd=6, port=988)
2013/09/12 15:01:33 0 s camd35: disabled
2013/09/12 15:01:33 0 s cs378x: disabled
2013/09/12 15:01:33 0 s newcamd: initialized (fd=7, port=34001, crypted)
2013/09/12 15:01:33 0 s -> CAID: 09C7 PROVID: 000000
2013/09/12 15:01:33 0 s cccam: initialized (fd=8, port=12659, crypted)
2013/09/12 15:01:33 0 s radegast: disabled
2013/09/12 15:01:33 0 s http thread started
2013/09/12 15:01:33 0 s reader check thread started
2013/09/12 15:01:33 0 s check thread started
2013/09/12 15:01:33 0 s creating thread for device /dev/sci0
2013/09/12 15:01:33 0 s creating thread for device /dev/ttyUSB0
2013/09/12 15:01:33 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/09/12 15:01:33 0 s waiting for local card init
2013/09/12 15:01:

Sie müssen registriert sein, um Links zu sehen.

h HTTP Server listening on port 12001
2013/09/12 15:01:33 54F960 r reader g02 initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/09/12 15:01:

Sie müssen registriert sein, um Links zu sehen.

r smargo init
2013/09/12 15:01:

Sie müssen registriert sein, um Links zu sehen.

r reader v14 initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369)
2013/09/12 15:01:34 0 g02 card detected

Kann es vielleicht sein das er nicht weis auf welchen Kartenleser die Dreambox zugreifen soll? Das sollte doch mit groupe= einzustellen gehen oder?

danke schon mal im vorraus

 

[Grunii]

AW: externer Card Reader V14 funktioniert nicht!

habe gestern noch einmal den Sky Reveiver aufgebaut.. die Karte war nicht freigeschaltet!

habe jetzt folgenden Fehlerlog:

irgendjemand eine Ahnung?

Spoiler

2013/09/13 16:14:25 0 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2013/09/13 16:14:25 0 s monitor: initialized (fd=6, port=988)
2013/09/13 16:14:25 0 s camd35: disabled
2013/09/13 16:14:25 0 s cs378x: disabled
2013/09/13 16:14:25 0 s newcamd: initialized (fd=7, port=34001, crypted)
2013/09/13 16:14:25 0 s -> CAID: 09C7 PROVID: 000000
2013/09/13 16:14:25 0 s cccam: initialized (fd=8, port=12659, crypted)
2013/09/13 16:14:25 0 s radegast: disabled
2013/09/13 16:14:25 0 s http thread started
2013/09/13 16:14:25 0 s reader check thread started
2013/09/13 16:14:25 0 s check thread started
2013/09/13 16:14:25 0 s creating thread for device /dev/sci0
2013/09/13 16:14:25 0 s creating thread for device /dev/ttyUSB0
2013/09/13 16:14:25 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/09/13 16:14:25 0 s waiting for local card init
2013/09/13 16:14:25 552950 h HTTP Server listening on port 12001
2013/09/13 16:14:25 54F960 r reader g02 initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/09/13 16:14:25 551158 r smargo init
2013/09/13 16:14:25 551158 r ERROR opening device /dev/ttyUSB0
2013/09/13 16:14:25 551158 r Cannot open device: /dev/ttyUSB0
2013/09/13 16:14:26 0 g02 card detected
2013/09/13 16:14:28 54F960 r ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2013/09/13 16:14:29 54F960 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/09/13 16:14:30 54F960 r [videoguard2-reader] parental lock setting: FF FF FF FF
2013/09/13 16:14:30 54F960 r [videoguard2-reader] type: VideoGuard Kabel Deutschland (09C7), caid: 09C7
2013/09/13 16:14:30 54F960 r [videoguard2-reader] serial: 29C1D059, BoxID: 12345678, baseyear: 2004
2013/09/13 16:14:30 54F960 r [videoguard2-reader] ready for requests
2013/09/13 16:14:30 54F960 r found cardsystem videoguard2
2013/09/13 16:14:30 54F960 r [videoguard2-reader] g02 card detected
2013/09/13 16:14:30 54F960 r [videoguard2-reader] type: VideoGuard Kabel Deutschland (09C7)
2013/09/13 16:14:30 54F960 r [videoguard2-reader] tier: 007b, expiry date: 2013/12/07-00:00:00
2013/09/13 16:14:30 54F960 r [videoguard2-reader] tier: 007d, expiry date: 2013/12/07-00:00:00
2013/09/13 16:14:30 54F960 r [videoguard2-reader] tier: 0081, expiry date: 2013/12/07-00:00:00
2013/09/13 16:14:30 54F960 r [videoguard2-reader] tier: 008e, expiry date: 2013/12/07-00:00:00
2013/09/13 16:14:30 54F960 r [videoguard2-reader] tier: 00c7, expiry date: 2013/12/07-00:00:00
2013/09/13 16:14:31 54F960 r [videoguard2-reader] tier: 00c9, expiry date: 2013/12/07-00:00:00
2013/09/13 16:14:31 54F960 r [videoguard2-reader] tier: 00f3, expiry date: 2013/12/07-00:00:00
2013/09/13 16:14:31 54F960 r [videoguard2-reader] tier: 00f4, expiry date: 2013/12/07-00:00:00
2013/09/13 16:14:31 54F960 r [videoguard2-reader] tier: 00fa, expiry date: 2013/12/07-00:00:00
2013/09/13 16:14:31 54F960 r [videoguard2-reader] tier: 00fe, expiry date: 2013/12/07-00:00:00
2013/09/13 16:14:31 54F960 r [videoguard2-reader] tier: 00ff, expiry date: 2013/12/07-00:00:00
2013/09/13 16:14:31 54F960 r [videoguard2-reader] tier: 012d, expiry date: 2013/11/07-00:00:00
2013/09/13 16:15:25 551158 r smargo init
2013/09/13 16:15:25 551158 r ERROR opening device /dev/ttyUSB0
2013/09/13 16:15:25 551158 r Cannot open device: /dev/ttyUSB0
2013/09/13 16:16:25 551158 r smargo init
2013/09/13 16:16:25 551158 r ERROR opening device /dev/ttyUSB0
2013/09/13 16:16:25 551158 r Cannot open device: /dev/ttyUSB0

 

[4gx35]

AW: externer Card Reader V14 funktioniert nicht!

protocol = mouse

oder besser

protocol = smartreader
device = Serial:Reader xxxxx....

die serial wird dir bei der dream angezeigt, wenn du den smargo entfernst und wieder dransteckst
oder unter hardware info

 

[modino2711]

AW: externer Card Reader V14 funktioniert nicht!

ändere mal in der oscam.server den externen reader:

protocol = mouse
device = /dev/ttyUSB0

oder wenn das smargo serial bekannt ist, kann aber nur mit version 1.04 odder höher ausgelesen werrden.

protocol = smartreader
device = Serial:7stelliges serial

edit: nicht schnell genug!

 

[Grunii]

AW: externer Card Reader V14 funktioniert nicht!

Supi danke euch!

Bin schon ein riesen Schritt weiter! also beide Configs funktionieren. Ich habe meinen Kabel reader aus der Config genommen und die Sat-Nutzer hatten Bild.
Sobald ich den Kabel Reader wieder einfüge haben diese kein Bild mehr. In der Log steht das der auf den falschen Reader zugreift.

Spoiler

2013/09/13 22:37:55 5598F0 c local (09C7&000000/00DF/A9:A78B): found (309 ms) by g02 (of 1 avail 1)
2013/09/13 22:37:58 560690 c encrypted cccam-client XX.XXX.XXX.XXX granted (mustermann, au=off)

Wie kann ich das jetzt noch einstellen? Sollte doch über die Gruppen funktionieren oder? Macht es aber nicht


LG und schon mal ein großes Dankeschönn!

 

[4gx35]

AW: externer Card Reader V14 funktioniert nicht!

geht einfach über serial und smartreader nicht ttyusb

 

[Grunii]

AW: externer Card Reader V14 funktioniert nicht!

ich glaube wir haben aneinander vorbei geredet!

also die Karte funktioniert jetzt. Nur muss ich noch CCCam noch sagen auf welchen reader ich zugreifen muss oder?
Also die eine Karte ist im externen Smart Rader (USB) und die andere im internen Smart Reader!

lg

 

[4gx35]

AW: externer Card Reader V14 funktioniert nicht!

nein machst du ja in oscam beim user,
sat haben immer group 3 , kabel group 1

kann man aber nur an ,ehreren zeilen im log erkennen

 

[Grunii]

AW: externer Card Reader V14 funktioniert nicht!

ja also aktuell hab ich es jetzt so:
oscam.server

Spoiler

[reader]
label = G02
enable = 1
protocol = internal
device = /dev/sci0
services =
caid = 09C7
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
ident =
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100




[reader]
label = v14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
detect = cd
mhz = 369
cardmhz = 369
group = 3
emmcache = 1,3,2

oscam.user

Spoiler

#
# user configuration
#
[account]
user = local
pwd =
group = 1
monlevel = 4
au = 1


[account]
user = kabel
pwd = kabel
monlevel = 4
group = 1
#au = Sky



[account]
user = sat
pwd = sat
monlevel = 4
group = 3
#au = Sky

und im Log steht aber:

Spoiler

2013/09/13 22:37:55 5598F0 c local (09C7&000000/00DF/A9:A78B): found (309 ms) by g02 (of 1 avail 1)
2013/09/13 22:37:58 560690 c encrypted cccam-client XX.XXX.XXX.XXX granted (sat, au=off)

also irgendwie greift er immer noch auf den falschen Reader zu!
weis gerade nicht was ich falsch mache

Wenn ich den Kabel Reader herauslösche funktioniert Sky bei allen Sat Usern aber ich habe kein Bild mehr für den Kabel Empfang (logisch ohne Reader)!

LG

 

[4gx35]

AW: externer Card Reader V14 funktioniert nicht!

was steht im log, wenn ein satuser umschaltet, die 3 zeilen reichen nicht aus, natürlich mit sky reader,
da muss doch mehr passieren, mal 10 zeilen mehr posten

auch mal log von beginn an, da stimmt was beim lesen der karten nicht wenn beide aktiv

 

[modino2711]

AW: externer Card Reader V14 funktioniert nicht!

wenn du in den readern sonst nix definiert hast, krallt sich oscam
automatisch den ersten reader.

die services sind für beide karten erst mal komplett, kann man natürlich
noch aufschlüsselt, zb HD,SD usw.
leg mal eine oscam.services an mit folgenden einträgen:

#Sky DE Komplett mit HD 
[skyallsat]
caid   = 098C
srvid  = 0008,0009,000A,000B,000C,000D,000E,0010,0011,0013,0014,0015,0016,0017,0018,0019,001A,001B,001C,001D,0021,0022,0023,0024,0025,0026,0027,0029,002A,002B,0032,0034,001E,0037,0038,0039,003A,003C,003D,003E,003F,0040,0041,0042,0043,0044,0046,0069,0070,0071,0072,0073,006A,006B,006C,,006D,006E,006F,006D,0066,0074,0075,0076,0077,0078,0079,007A,007B,007C,007D,007E,007F,0080,0081,0082,0083,0084,00A8,00DD,00DE,00DF,00FB,00F2,00FC,00FD,00FE,0105,0106,0107,010F,0110,0111,0119,011A,011B,0123,0124,0125,012D,012E,012F,0137,0138,0139,0141,0142,0143,014B,014C,014D,014E,0156,0159,0160,0163,016B,016D,0175,0201,0203,0204,0206,07FF,2EFE,3331,4461,4462,6FB8,6FF1,7001,7009,700A,013E,0148,015C,010E,0118,0122,012C,0136,0140,014A,0154,0104

#Sky DE komplett Kabel Deutschland
[skyallKD]
caid   = 09C7
srvid  = 000A,000B,002B,0029,0009,0014,0204,0008,0203,0019,0083,006F,0082,0071,0070,EF14,0084,0EE6,006A,006B,006C,0072,002A,0024,0017,0032,001D,001B,0021,0022,0023,0025,0026,0027,001C,0013,001A,000E,000D,000C,00A8,0206,0016,0018,0034,0015,00DF,0106,0110,011A,0124,012E,0138,0142,014C,0156,0160,00FC,003C,003D,2EFE,4461,4462,003F,003E,3393,0038,003A,0042,0040,700A,0044,0043,0043,6FF1,7009,3331,3395,001E,0096,0097,0098,0099,009A,009B,009C,0015,0201,0159,0163,016D,0046,0011,00DD,00DE,00FD,014D,0143,0139,012F,0125,011B,0107,0111,016B,0175

in den G02 reader mit caid 09C7 dann eintragen:

services = skyallKD
ecmwhitelist = 5D,5E,5F,60,61,62,63,64,77,78,7A,7C

in den V14 reader mit caid 098C dann eintragen:

services = skyallsat
ecmwhitelist = 52,64,6A,9C,A1,91,96,98

teste das mal, ob die karten dann richtig angesprochen werden.

ein kompletter log wäre natürlich auch noch hilfreich, damit man sehen kann,
was passiert, wenn die karten angesprochen werden.

 

[dodo83]

AW: externer Card Reader V14 funktioniert nicht!

also irgendwie greift er immer noch auf den falschen Reader zu!

aus dem log sieht man nicht heraus das der user auf den falschen reader zurgeift sondern nur in der einen zeile das der lokale auf die 09C7 und der eine sich gerade einloggt

poste mal bitte einen ganzen log vom start bis zur senderabfrage was dir schon geraten wurde

PS. würde auch einem Sat User erlauben (der das kann) die karte mit EMM´s zu versorgen, sonst musst du die immer wieder im original receiver einstecken oder neu freischalten

 

[Grunii]

AW: externer Card Reader V14 funktioniert nicht!

Hallo...
Danke für eure Hilfe!

Ich habe jetzt eine oscam.services angelegt... leider findet er jetzt gar keinen reader mehr!

Hier mein kompletter log:

Spoiler

2013/09/15 15:54:18 0 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded 2013/09/15 15:54:18 0 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2013/09/15 15:54:18 0 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2013/09/15 15:54:18 0 s monitor: initialized (fd=6, port=988)
2013/09/15 15:54:18 0 s camd35: disabled
2013/09/15 15:54:18 0 s cs378x: disabled
2013/09/15 15:54:18 0 s newcamd: initialized (fd=7, port=34001, crypted)
2013/09/15 15:54:18 0 s -> CAID: 09C7 PROVID: 000000
2013/09/15 15:54:18 0 s cccam: initialized (fd=8, port=12659, crypted)
2013/09/15 15:54:18 0 s radegast: disabled
2013/09/15 15:54:18 0 s http thread started
2013/09/15 15:54:18 0 s reader check thread started
2013/09/15 15:54:18 0 s check thread started
2013/09/15 15:54:18 0 s creating thread for device /dev/sci0
2013/09/15 15:54:18 0 s creating thread for device /dev/ttyUSB0
2013/09/15 15:54:18 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/09/15 15:54:18 0 s waiting for local card init
2013/09/15 15:54:18 553BE8 h HTTP Server listening on port 12001
2013/09/15 15:54:18 550BF8 r reader g02 initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/09/15 15:54:19 0 g02 card detected
2013/09/15 15:54:21 550BF8 r ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2013/09/15 15:54:21 5523F0 r reader v14 initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369)
2013/09/15 15:54:21 0 v14 card detected
2013/09/15 15:54:22 550BF8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/09/15 15:54:24 550BF8 r [videoguard2-reader] parental lock setting: FF FF FF FF
2013/09/15 15:54:24 550BF8 r [videoguard2-reader] type: VideoGuard Kabel Deutschland (09C7), caid: 09C7
2013/09/15 15:54:24 550BF8 r [videoguard2-reader] serial: 29C1D059, BoxID: 12345678, baseyear: 2004
2013/09/15 15:54:24 550BF8 r [videoguard2-reader] ready for requests
2013/09/15 15:54:24 550BF8 r found cardsystem videoguard2
2013/09/15 15:54:24 550BF8 r [videoguard2-reader] g02 card detected
2013/09/15 15:54:24 550BF8 r [videoguard2-reader] type: VideoGuard Kabel Deutschland (09C7)
2013/09/15 15:54:24 550BF8 r [videoguard2-reader] tier: 007b, expiry date: 2013/12/07-00:00:00
2013/09/15 15:54:24 550BF8 r [videoguard2-reader] tier: 007d, expiry date: 2013/12/07-00:00:00
2013/09/15 15:54:24 550BF8 r [videoguard2-reader] tier: 0081, expiry date: 2013/12/07-00:00:00
2013/09/15 15:54:24 550BF8 r [videoguard2-reader] tier: 008e, expiry date: 2013/12/07-00:00:00
2013/09/15 15:54:24 550BF8 r [videoguard2-reader] tier: 00c7, expiry date: 2013/12/07-00:00:00
2013/09/15 16:03:08 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #5882 (mipsel-oe-linux)
2013/09/15 16:03:08 0 s version=1.20-unstable_svn, build #5882, system=mipsel-oe-linux, nice=-1
2013/09/15 16:03:08 0 s client max. idle=120 sec, debug level=0
2013/09/15 16:03:08 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2013/09/15 16:03:08 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2013/09/15 16:03:08 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2013/09/15 16:03:08 0 s userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
2013/09/15 16:03:08 0 s signal handling initialized (type=sysv)
2013/09/15 16:03:08 0 s can't open file "/etc/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2013/09/15 16:03:08 0 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2013/09/15 16:03:08 0 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2013/09/15 16:03:08 0 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2013/09/15 16:03:08 0 s monitor: initialized (fd=6, port=988)
2013/09/15 16:03:08 0 s camd35: disabled
2013/09/15 16:03:08 0 s cs378x: disabled
2013/09/15 16:03:08 0 s newcamd: initialized (fd=7, port=34001, crypted)
2013/09/15 16:03:08 0 s -> CAID: 09C7 PROVID: 000000
2013/09/15 16:03:08 0 s cccam: initialized (fd=8, port=12659, crypted)
2013/09/15 16:03:08 0 s radegast: disabled
2013/09/15 16:03:08 0 s http thread started
2013/09/15 16:03:08 0 s reader check thread started
2013/09/15 16:03:08 0 s check thread started
2013/09/15 16:03:08 0 s creating thread for device /dev/sci0
2013/09/15 16:03:08 0 s creating thread for device /dev/ttyUSB0
2013/09/15 16:03:08 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/09/15 16:03:08 0 s waiting for local card init
2013/09/15 16:03:08 554270 h HTTP Server listening on port 12001
2013/09/15 16:03:08 551280 r reader g02 initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/09/15 16:03:09 0 g02 card detected
2013/09/15 16:03:08 0 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2013/09/15 16:03:08 0 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2013/09/15 16:03:08 0 s monitor: initialized (fd=6, port=988)
2013/09/15 16:03:08 0 s camd35: disabled
2013/09/15 16:03:08 0 s cs378x: disabled
2013/09/15 16:03:08 0 s newcamd: initialized (fd=7, port=34001, crypted)
2013/09/15 16:03:08 0 s -> CAID: 09C7 PROVID: 000000
2013/09/15 16:03:08 0 s cccam: initialized (fd=8, port=12659, crypted)
2013/09/15 16:03:08 0 s radegast: disabled
2013/09/15 16:03:08 0 s http thread started
2013/09/15 16:03:08 0 s reader check thread started
2013/09/15 16:03:08 0 s check thread started
2013/09/15 16:03:08 0 s creating thread for device /dev/sci0
2013/09/15 16:03:08 0 s creating thread for device /dev/ttyUSB0
2013/09/15 16:03:08 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/09/15 16:03:08 0 s waiting for local card init
2013/09/15 16:03:08 554270 h HTTP Server listening on port 12001
2013/09/15 16:03:08 551280 r reader g02 initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/09/15 16:03:09 0 g02 card detected
2013/09/15 16:03:10 552A78 r reader v14 initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369)
2013/09/15 16:03:10 551280 r ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2013/09/15 16:03:11 0 v14 card detected
2013/09/15 16:03:11 551280 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/09/15 16:03:13 551280 r [videoguard2-reader] parental lock setting: FF FF FF FF
2013/09/15 16:03:13 551280 r [videoguard2-reader] type: VideoGuard Kabel Deutschland (09C7), caid: 09C7
2013/09/15 16:03:13 551280 r [videoguard2-reader] serial: 29C1D059, BoxID: 12345678, baseyear: 2004
2013/09/15 16:03:13 551280 r [videoguard2-reader] ready for requests
2013/09/15 16:03:13 551280 r found cardsystem videoguard2
2013/09/15 16:03:13 551280 r [videoguard2-reader] g02 card detected
2013/09/15 16:03:13 551280 r [videoguard2-reader] type: VideoGuard Kabel Deutschland (09C7)
2013/09/15 16:03:13 551280 r [videoguard2-reader] tier: 007b, expiry date: 2013/12/07-00:00:00
2013/09/15 16:03:13 551280 r [videoguard2-reader] tier: 007d, expiry date: 2013/12/07-00:00:00
2013/09/15 16:03:13 551280 r [videoguard2-reader] tier: 0081, expiry date: 2013/12/07-00:00:00
2013/09/15 16:03:13 551280 r [videoguard2-reader] tier: 008e, expiry date: 2013/12/07-00:00:00
2013/09/15 16:03:13 551280 r [videoguard2-reader] tier: 00c7, expiry date: 2013/12/07-00:00:00
2013/09/15 16:03:13 551280 r [videoguard2-reader] tier: 00c9, expiry date: 2013/12/07-00:00:00
2013/09/15 16:03:13 551280 r [videoguard2-reader] tier: 00f3, expiry date: 2013/12/07-00:00:00
2013/09/15 16:03:13 551280 r [videoguard2-reader] tier: 00f4, expiry date: 2013/12/07-00:00:00
2013/09/15 16:03:13 551280 r [videoguard2-reader] tier: 00fa, expiry date: 2013/12/07-00:00:00
2013/09/15 16:03:13 551280 r [videoguard2-reader] tier: 00fe, expiry date: 2013/12/07-00:00:00
2013/09/15 16:03:13 551280 r [videoguard2-reader] tier: 00ff, expiry date: 2013/12/07-00:00:00
2013/09/15 16:03:13 551280 r [videoguard2-reader] tier: 012d, expiry date: 2013/11/07-00:00:00
2013/09/15 16:03:17 552A78 r ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2013/09/15 16:03:19 552A78 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
2013/09/15 16:03:21 552A78 r [videoguard2-reader] tier: 00c9, expiry date: 2007/01/10-00:00:00
2013/09/15 16:03:21 552A78 r [videoguard2-reader] tier: 00f3, expiry date: 2007/01/10-00:00:00
2013/09/15 16:03:21 552A78 r [videoguard2-reader] tier: 00fa, expiry date: 2007/01/10-00:00:00
2013/09/15 16:03:22 0 s init for all local cards done
2013/09/15 16:03:22 0 s anti cascading disabled
2013/09/15 16:03:22 55AC48 c plain dvbapi-client granted (local, au=off)
2013/09/15 16:03:22 55AC48 c dvbapi: can't open priority file /etc/tuxbox/config/oscam.dvbapi
2013/09/15 16:03:22 55C3B0 c anonymous disconnected from XXX.XX.XXX.XXX
2013/09/15 16:03:22 55C3B0 c thread 2EEB14B0 ended!
2013/09/15 16:03:22 55DB18 c anonymous disconnected from XXX.XX.XXX.XXX
2013/09/15 16:03:22 55DB18 c thread 2F6B14B0 ended!
2013/09/15 16:03:22 55F328 c anonymous disconnected from XXX.XX.XXX.XXX
2013/09/15 16:03:22 55F328 c thread 2FEB14B0 ended!
2013/09/15 16:03:23 569C88 c encrypted cccam-client XXX.XX.XXX.XXX granted (SKYKAB, au=off)
2013/09/15 16:03:23 56C718 c encrypted cccam-client XXX.XX.XXX.XXX granted (SKYSAT, au=off)
2013/09/15 16:03:26 55AC48 c dvbapi: [ADD PID 0] CAID: 1834 ECM_PID: 1C0C PROVID: 000000
2013/09/15 16:03:26 55AC48 c dvbapi: [ADD PID 1] CAID: 09C7 ECM_PID: 1D0C PROVID: 000000
2013/09/15 16:03:26 55AC48 c dvbapi: [ADD PID 2] CAID: 1861 ECM_PID: 190C PROVID: 000000
2013/09/15 16:03:26 55AC48 c dvbapi: [ADD PID 3] CAID: 1722 ECM_PID: 160C PROVID: 000000
2013/09/15 16:03:26 55AC48 c dvbapi: new program number: 00DF (1834:00DF unknown)
2013/09/15 16:03:26 55AC48 c local (1834&000000/00DF/89:A7F6): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2013/09/15 16:03:26 55AC48 c local (09C7&000000/00DF/A9:AA59): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2013/09/15 16:03:26 55AC48 c local (1861&000000/00DF/89:89A8): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2013/09/15 16:03:26 55AC48 c dvbapi: try pids again #1
2013/09/15 16:03:26 55AC48 c local (1722&000000/00DF/93:16C1): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2013/09/15 16:03:27 55AC48 c local (1834&000000/00DF/89:A7F6): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2013/09/15 16:03:27 55AC48 c local (09C7&000000/00DF/A9:AA59): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2013/09/15 16:03:27 55AC48 c local (1861&000000/00DF/89:89A8): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2013/09/15 16:03:27 55AC48 c dvbapi: try pids again #2
2013/09/15 16:03:27 55AC48 c local (1722&000000/00DF/93:16C1): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2013/09/15 16:03:27 55AC48 c local (1834&000000/00DF/89:A7F6): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2013/09/15 16:03:27 55AC48 c local (09C7&000000/00DF/A9:AA59): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2013/09/15 16:03:27 55AC48 c local (1861&000000/00DF/89:89A8): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2013/09/15 16:03:27 55AC48 c dvbapi: try pids again #3
2013/09/15 16:03:27 55AC48 c dvbapi: can't decode channel
2013/09/15 16:03:27 55AC48 c local (1722&000000/00DF/93:16C1): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2013/09/15 16:03:30 569C88 c kurt (09C7&000000/C617/63:67F1): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2013/09/15 16:03:36 55F328 c encrypted cccam-client 178.25.152.77 granted (max, au=off)
2013/09/15 16:03:44 569C88 c kurt (09C7&000000/C617/63:51E5): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2013/09/15 16:03:48 55F328 c max (09C7&000000/00DF/A9:77BA): rejected group (0 ms) (of 0 avail 0) (no matching reader)

oscam.services

Spoiler

#Sky DE Komplett mit HD
[skyallsat]
caid = 098C
srvid = 0008,0009,000A,000B,000C,000D,000E,0010,0011,0013,0014,0015,0016,0017,0018,0019,001A,001B,001C,001D,0021,0022,0023,0024,0025,0026,0027,0029,002A,002B,0032,0034,001E,0037,0038,0039,003A,003C,003D,003E,003F,0040,0041,0042,0043,0044,0046,0069,0070,0071,0072,0073,006A,006B,006C,,006D,006E,006F,006D,0066,0074,0075,0076,0077,0078,0079,007A,007B,007C,007D,007E,007F,0080,0081,0082,0083,0084,00A8,00DD,00DE,00DF,00FB,00F2,00FC,00FD,00FE,0105,0106,0107,010F,0110,0111,0119,011A,011B,0123,0124,0125,012D,012E,012F,0137,0138,0139,0141,0142,0143,014B,014C,014D,014E,0156,0159,0160,0163,016B,016D,0175,0201,0203,0204,0206,07FF,2EFE,3331,4461,4462,6FB8,6FF1,7001,7009,700A,013E,0148,015C,010E,0118,0122,012C,0136,0140,014A,0154,0104


#Sky DE komplett Kabel Deutschland
[skyallKD]
caid = 09C7
srvid = 000A,000B,002B,0029,0009,0014,0204,0008,0203,0019,0083,006F,0082,0071,0070,EF14,0084,0EE6,006A,006B,006C,0072,002A,0024,0017,0032,001D,001B,0021,0022,0023,0025,0026,0027,001C,0013,001A,000E,000D,000C,00A8,0206,0016,0018,0034,0015,00DF,0106,0110,011A,0124,012E,0138,0142,014C,0156,0160,00FC,003C,003D,2EFE,4461,4462,003F,003E,3393,0038,003A,0042,0040,700A,0044,0043,0043,6FF1,7009,3331,3395,001E,0096,0097,0098,0099,009A,009B,009C,0015,0201,0159,0163,016D,0046,0011,00DD,00DE,00FD,014D,0143,0139,012F,0125,011B,0107,0111,016B,0175

oscam.conf

Spoiler

#
# main configuration
#


[global]
nice = -1
WaitForCards = 1


[monitor]
port = 988
aulow = 120
monlevel = 4


[webif]
httpport = 12001
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns =
httpreadonly = 1






[newcamd]
key = 0102030405060708091011121314
port = 34001@09c7:000000


[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox




[cccam]
port = 12659
reshare = 2
version = 2.1.4

oscam.server

Spoiler

## reader configuration
#


[reader]
label = G02
enable = 1
protocol = internal
device = /dev/sci0
services =
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
ident =
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100
services = skyallKD
ecmwhitelist = 5D,5E,5F,60,61,62,63,64,77,78,7A,7C




[reader]
label = v14
protocol = mouse
device = /dev/ttyUSB0
boxid = 12345678
detect = cd
mhz = 369
cardmhz = 369
group = 3
emmcache = 1,3,2
services = skyallsat
ecmwhitelist = 52,64,6A,9C,A1,91,96,98

wie erlaube ich den SAT User mit EMM`s zu versorgen?

LG

 

[4gx35]

AW: externer Card Reader V14 funktioniert nicht!

nimm erst mal die ecmwhitelist zum testen aus den readern raus

 

[dodo83]

AW: externer Card Reader V14 funktioniert nicht!

wie erlaube ich den SAT User mit EMM`s zu versorgen?

dazu musst du einem Sat User AU erlauben, im account den eintrag au = 1 (oder labelname also v14) einfügen, würde aber erstmal deine oscam version updaten, damit du auch den fastmode nutzen kannst, aktuell ist man bei 89XX