Easymouse mit Raspberrypi Oscam.config

Kind regards · 10. Mai 2018

Wenn keine Anfragen an den Server kommen, was sollte dieser dann beantworten?
Offline User sind halt Offline, da solltes du mal mit einem Online User probieren, was dann im Log erscheint.
IP Change beim Server ?
Was steht im Log (Client Seite), wenn dieser sich mit dem Server verbinden möchte?

terencehill2205 · 14. Mai 2018

Ich musste für 3 Tage den PC abbauen darum konnte ich nicht antworten. Heute 14.05. 22 Uhr habe ich alles wieder hoch gefahren und anscheinend läuft es grade.
Ich werden die sache aber im Auge behalten

Moin EliteDer Fehler ist glaube ich klar : no route to host. Aber warum? Und wieso soll es mal gehen undes läuft 1 / 2 tage und dann wieder nicht.

Reciver :

2018/05/18 17:01:20 00000000 s (main) System name = Linux
2018/05/18 17:01:20 00000000 s (main) Host name = gbquadplus
2018/05/18 17:01:20 00000000 s (main) Release = 4.8.3
2018/05/18 17:01:20 00000000 s (main) Version = #2 SMP Fri Mar 9 13:26:44 CET 2018
2018/05/18 17:01:20 00000000 s (main) Machine = mips
2018/05/18 17:01:20 00000000 s (main) Stb model = gbquadplus
2018/05/18 17:01:20 00000000 s (main) Stb vumodel = vuultimo
2018/05/18 17:01:20 00000000 s (main) Stb boxtype = gigablue
2018/05/18 17:01:20 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 702
2018/05/18 17:01:20 00000000 s (emu) OSCam-Emu version 735
2018/05/18 17:01:20 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/05/18 17:01:20 00000000 s (main) signal handling initialized
2018/05/18 17:01:20 00000000 s (net) cccam: initialized (fd=4, port=12000)
2018/05/18 17:01:20 00000000 s (reader) Remote-CCcam [cccam] creating thread for device testethepi.ddnss.ch
2018/05/18 17:01:20 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/05/18 17:01:20 00000000 s (main) waiting for local card init
2018/05/18 17:01:20 7A160181 h (webif) webif: decompressed 176982 bytes back into 435560 bytes
2018/05/18 17:01:20 7A160181 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/05/18 17:01:20 7B06BAB9 p (reader) testethepi.ddnss.ch: resolved ip=178.6.144.112
2018/05/18 17:01:20 7B06BAB9 p (reader) Remote-CCcam [cccam] connecting to testethepi.ddnss.ch:37778
2018/05/18 17:01:20 7B06BAB9 p (reader) Remote-CCcam [cccam] connect failed: No route to host
2018/05/18 17:01:20 7B06BAB9 p (reader) Remote-CCcam [cccam] proxy initialized, server testethepi.ddnss.ch:37778
2018/05/18 17:01:20 00000000 s (main) init for all local cards done
2018/05/18 17:01:20 00000000 s (anticasc) anti cascading disabled
2018/05/18 17:01:20 4321CE75 c (client) plain dvbapi-client granted (local, au=auto (3 reader))
2018/05/18 17:01:20 4321CE75 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv_emu/oscam.ccache
2018/05/18 17:01:20 4321CE75 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/05/18 17:01:33 7B06BAB9 p (reader) Remote-CCcam [cccam] connecting to testethepi.ddnss.ch:37778
2018/05/18 17:01:33 7B06BAB9 p (reader) Remote-CCcam [cccam] connect failed: No route to host
2018/05/18 17:01:46 7B06BAB9 p (reader) Remote-CCcam [cccam] connecting to testethepi.ddnss.ch:37778
2018/05/18 17:01:46 7B06BAB9 p (reader) Remote-CCcam [cccam] connect failed: No route to host
2018/05/18 17:01:59 7B06BAB9 p (reader) Remote-CCcam [cccam] connecting to testethepi.ddnss.ch:37778
2018/05/18 17:01:59 7B06BAB9 p (reader) Remote-CCcam [cccam] connect failed: No route to host
2018/05/18 17:02:12 7B06BAB9 p (reader) Remote-CCcam [cccam] connecting to testethepi.ddnss.ch:37778
2018/05/18 17:02:12 7B06BAB9 p (reader) Remote-CCcam [cccam] connect failed: No route to host
2018/05/18 17:02:38 7B06BAB9 p (reader) Remote-CCcam [cccam] connecting to testethepi.ddnss.ch:37778
2018/05/18 17:02:38 7B06BAB9 p (reader) Remote-CCcam [cccam] connect failed: No route to host
2018/05/18 17:03:43 7B06BAB9 p (reader) Remote-CCcam [cccam] connecting to testethepi.ddnss.ch:37778
2018/05/18 17:03:43 7B06BAB9 p (reader) Remote-CCcam [cccam] connect failed: No route to host
2018/05/18 17:04:48 7B06BAB9 p (reader) Remote-CCcam [cccam] connecting to testethepi.ddnss.ch:37778
2018/05/18 17:04:48 7B06BAB9 p (reader) Remote-CCcam [cccam] connect failed: No route to host

[global]

[cccam]
port = 37778 ( Hier stand es noch auf 12000 vor 1 minute, aber es hat funktioniert )
reshare = 0
version = 2.3.0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local

[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httppollrefresh = 10
#httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0
httpuser = XXXX
httppwd = XXXX
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1

[account]
user = local
pwd =XXXX
group = 1
uniq = 3
au = 1

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11353
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = Tnk_Polen
enable = 0
protocol = internal
device = /dev/sci1
caid = 0B01
detect = cd
mhz = 500
cardmhz = 368
ident = 0B01:000000
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1

[reader]
label = emulator
enable = 0
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

[reader]
label = Remote-CCcam
protocol = cccam_ext
device = testethepi.ddnss.ch,37778
user = gigablue
password = bene1
inactivitytimeout = 30
group = 1
cccversion = 2.3.0

2018/05/05 22:56:45 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11401 (arm-linux-gnueabihf)
2018/05/05 22:56:45 00000000 s (main) System name = Linux
2018/05/05 22:56:45 00000000 s (main) Host name = raspberrypi
2018/05/05 22:56:45 00000000 s (main) Release = 4.9.35-v7+
2018/05/05 22:56:45 00000000 s (main) Version = #1014 SMP Fri Jun 30 14:47:43 BST 2017
2018/05/05 22:56:45 00000000 s (main) Machine = armv7l
2018/05/05 22:56:45 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 21564
2018/05/05 22:56:45 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2018/05/05 22:56:45 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2018/05/05 22:56:45 00000000 s (main) signal handling initialized
2018/05/05 22:56:45 00000000 s (led) LED support is not active. Can't detect machine type.
2018/05/05 22:56:45 00000000 s (net) cccam: initialized (fd=5, port=37778)
2018/05/05 22:56:45 00000000 s (reader) Tnk_Polen [mouse] creating thread for device /dev/ttyUSB0
2018/05/05 22:56:45 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/05/05 22:56:45 00000000 s (main) waiting for local card init
2018/05/05 22:56:45 494F1C31 h (webif) webif: decompressed 176696 bytes back into 434464 bytes
2018/05/05 22:56:45 494F1C31 h (webif) HTTP Server running. ip=0.0.0.0 port=1234
2018/05/05 22:56:45 4CD0C796 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75479
2018/05/05 22:56:45 4CD0C796 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 1 value 3b time_us 2681
2018/05/05 22:56:45 4CD0C796 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 2 value 24 time_us 31438
2018/05/05 22:56:45 4CD0C796 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 3 value 00 time_us 22
2018/05/05 22:56:45 4CD0C796 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 4 value 30 time_us 20
2018/05/05 22:56:45 4CD0C796 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 5 value 42 time_us 20
2018/05/05 22:56:45 4CD0C796 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 6 value 30 time_us 20
2018/05/05 22:56:45 4CD0C796 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 7 value 30 time_us 19
2018/05/05 22:56:45 4CD0C796 r (reader) Tnk_Polen [mouse] Buffers readed 7 bytes total time_us 109878
2018/05/05 22:56:45 4CD0C796 r (reader) Tnk_Polen [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=800, cardmhz=368)
2018/05/05 22:56:46 4CD0C796 r (reader) Tnk_Polen [mouse] card detected
2018/05/05 22:56:46 4CD0C796 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75429
2018/05/05 22:56:47 4CD0C796 r (reader) Tnk_Polen [mouse] ATR: 3B 24 00 30 42 30 30
2018/05/05 22:56:47 4CD0C796 r (reader) Tnk_Polen [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
2018/05/05 22:56:47 4CD0C796 r (reader) Tnk_Polen [mouse] Setting baudrate to 21505 bps
2018/05/05 22:56:47 4CD0C796 r (reader) Tnk_Polen [mouse] Calculated work ETU is 46.50 us reader mhz = 800
2018/05/05 22:56:47 4CD0C796 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75424
2018/05/05 22:56:47 4CD0C796 r (reader) Tnk_Polen [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 8.00 MHz (specified in reader->mhz)
2018/05/05 22:56:48 4CD0C796 r (reader) Tnk_Polen [mouse] type: Conax, caid: 0B01, serial: ##########, hex serial: ########, card: v64
2018/05/05 22:56:48 4CD0C796 r (reader) Tnk_Polen [mouse] Providers: 1
2018/05/05 22:56:48 4CD0C796 r (reader) Tnk_Polen [mouse] Provider: 1 Provider-Id: 000000
2018/05/05 22:56:48 4CD0C796 r (reader) Tnk_Polen [mouse] Provider: 1 SharedAddress: ########
2018/05/05 22:56:48 4CD0C796 r (reader) Tnk_Polen [mouse] found card system conax
2018/05/05 22:56:48 4CD0C796 r (reader) Tnk_Polen [conax] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/05/05 22:56:49 4CD0C796 r (reader) Tnk_Polen [conax] Package: 1, id: 1010, classes: 0100C000, date: 2015/01/01 - 2015/01/31, name: ITI Neovision
2018/05/05 22:56:49 4CD0C796 r (reader) Tnk_Polen [conax] Package: 2, id: 1010, classes: 0100C000, date: 2014/12/01 - 2014/12/31, name: ITI Neovision
2018/05/05 22:56:49 4CD0C796 r (reader) Tnk_Polen [conax] Package: 3, id: 1020, classes: 01000000, date: 2011/06/01 - 2011/06/30, name: ITI VOD 1
2018/05/05 22:56:49 4CD0C796 r (reader) Tnk_Polen [conax] Package: 4, id: 1020, classes: 01000001, date: 2009/04/01 - 2009/04/30, name: ITI VOD 1
2018/05/05 22:56:49 4CD0C796 r (reader) Tnk_Polen [conax] Package: 5, id: 1050, classes: 01000014, date: 2018/05/01 - 2018/05/31, name: ITI 2 Neovision
2018/05/05 22:56:49 4CD0C796 r (reader) Tnk_Polen [conax] Package: 6, id: 1050, classes: 01000014, date: 2018/04/01 - 2018/04/30, name: ITI 2 Neovision
2018/05/05 22:56:49 4CD0C796 r (reader) Tnk_Polen [conax] Package: 7, id: 1060, classes: 01000000, date: 2016/11/01 - 2016/11/30, name:
2018/05/05 22:56:49 4CD0C796 r (reader) Tnk_Polen [conax] Package: 8, id: 1060, classes: 01000000, date: 2016/10/01 - 2016/10/31, name:
2018/05/05 22:56:49 4CD0C796 r (reader) Tnk_Polen [conax] ready for requests
2018/05/05 22:56:49 00000000 s (main) init for all local cards done
2018/05/05 22:56:49 00000000 s (emmcache) loaded 120 emmcache records from /usr/local/etc/oscam.emmcache in 4 ms
2018/05/05 22:56:49 00000000 s (emmcache) loaded 120 emmstat records from /usr/local/etc/oscam.emmstat in 1 ms
2018/05/05 22:56:49 00000000 s (anticasc) anti cascading disabled

Easymouse mit Raspberrypi Oscam.config

Kind regards

terencehill2205

Newbie

Ähnliche Themen

Easymouse mit Raspberrypi Oscam.config

Kind regards

terencehill2205

Newbie

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz