Easymouse mit Raspberrypi Oscam.config

[terencehill2205]

Hallo Elite der Elite

Ich versuche jetzt die Smart Karte TNK Polen mit der Easymous und dem Raspberry 3 zum laufen zu kriegen um sie Später ins Wohnzimmer zu Sharen.


Die Eaymaous Schalter sind von Links "oben oben unten oben" ob das richtig ist keine Ahnung finde dazu auch zuviel unterschiedliche angaben.

Mit dem dvbapi stimmt auch was nicht.

Meine Hoffung ist das jemand mir helfen kann.

Spoiler: Live LOG

• 2018/04/11 23:40:57 00000000 s (main) System name = Linux
• 2018/04/11 23:40:57 00000000 s (main) Host name = raspberrypi
• 2018/04/11 23:40:57 00000000 s (main) Release = 4.9.35-v7+
• 2018/04/11 23:40:57 00000000 s (main) Version = #1014 SMP Fri Jun 30 14:47:43 BST 2017
• 2018/04/11 23:40:57 00000000 s (main) Machine = armv7l
• 2018/04/11 23:40:57 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 26560
• 2018/04/11 23:40:57 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
• 2018/04/11 23:40:57 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/04/11 23:40:57 00000000 s (main) signal handling initialized
• 2018/04/11 23:40:57 00000000 s (led) LED support is not active. Can't detect machine type.
• 2018/04/11 23:40:57 00000000 s (reader) Tnk_Polen [mouse] creating thread for device /dev/ttyUSB0
• 2018/04/11 23:40:57 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/04/11 23:40:57 00000000 s (main) waiting for local card init
• 2018/04/11 23:40:57 7D04C305 h (webif) webif: decompressed 176696 bytes back into 434464 bytes
• 2018/04/11 23:40:57 7D04C305 h (webif) HTTP Server running. ip=0.0.0.0 port=1234
• 2018/04/11 23:40:57 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 1 value 24 time_us 33300
• 2018/04/11 23:40:57 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 2 value 07 time_us 14913
• 2018/04/11 23:40:57 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 3 value 38 time_us 24
• 2018/04/11 23:40:57 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 4 value 8c time_us 23
• 2018/04/11 23:40:57 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 5 value 42 time_us 23
• 2018/04/11 23:40:57 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 6 value 07 time_us 23
• 2018/04/11 23:40:57 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 7 value 1c time_us 23
• 2018/04/11 23:40:57 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 8 value e2 time_us 23
• 2018/04/11 23:40:57 62C11437 r (reader) Tnk_Polen [mouse] Buffers readed 8 bytes total time_us 124805
• 2018/04/11 23:40:57 62C11437 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75418
• 2018/04/11 23:40:57 62C11437 r (reader) Tnk_Polen [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=368)
• 2018/04/11 23:40:58 62C11437 r (reader) Tnk_Polen [mouse] card detected
• 2018/04/11 23:40:58 62C11437 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75424
• 2018/04/11 23:40:59 62C11437 r (reader) Tnk_Polen [mouse] ATR: 3B 24 00 30 42 30 30
• 2018/04/11 23:40:59 62C11437 r (reader) Tnk_Polen [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
• 2018/04/11 23:40:59 62C11437 r (reader) Tnk_Polen [mouse] Setting baudrate to 9600 bps
• 2018/04/11 23:40:59 62C11437 r (reader) Tnk_Polen [mouse] Calculated work ETU is 104.20 us reader mhz = 357
• 2018/04/11 23:40:59 62C11437 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75418
• 2018/04/11 23:40:59 62C11437 r (reader) Tnk_Polen [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.57 MHz (specified in reader->mhz)
• 2018/04/11 23:41:02 62C11437 r (reader) Tnk_Polen [mouse] card system not supported
• 2018/04/11 23:41:02 62C11437 r (reader) Tnk_Polen [mouse] Normal mode failed, reverting to Deprecated Mode
• 2018/04/11 23:41:02 62C11437 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75420
• 2018/04/11 23:41:03 62C11437 r (reader) Tnk_Polen [mouse] ATR: 3B 24 00 30 42 30 30
• 2018/04/11 23:41:03 62C11437 r (reader) Tnk_Polen [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
• 2018/04/11 23:41:03 62C11437 r (reader) Tnk_Polen [mouse] Calculated work ETU is 104.20 us reader mhz = 357
• 2018/04/11 23:41:03 62C11437 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75423
• 2018/04/11 23:41:03 62C11437 r (reader) Tnk_Polen [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.57 MHz (specified in reader->mhz)
• 2018/04/11 23:41:06 62C11437 r (reader) Tnk_Polen [mouse] card system not supported
• 2018/04/11 23:41:06 62C11437 r (reader) Tnk_Polen [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2018/04/11 23:41:06 62C11437 r (reader) Tnk_Polen [mouse] card initializing error
• 2018/04/11 23:41:07 00000000 s (main) init for all local cards done
• 2018/04/11 23:41:07 00000000 s (emmcache) loaded 0 emmcache records from /usr/local/etc/oscam.emmcache in 0 ms
• 2018/04/11 23:41:07 00000000 s (emmcache) loaded 0 emmstat records from /usr/local/etc/oscam.emmstat in 0 ms
• 2018/04/11 23:41:07 00000000 s (anticasc) anti cascading disabled
• 2018/04/11 23:41:07 68FF36DC c (client) plain dvbapi-client granted (linuxsatsupport, au=auto (1 reader))
• 2018/04/11 23:41:07 68FF36DC c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
• 2018/04/11 23:41:07 68FF36DC c (dvbapi) ERROR: Could not detect DVBAPI version.

Spoiler: Oscam.config

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11401
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /tmp/oscam.log
clienttimeout = 10
clientmaxidle = 160
nice = 1
maxlogsize = 2048
emmlogdir = /usr/local/logs/

[cache]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = linuxsatsupport

[webif]
httpport = 1234
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,10.10.10.10-192.168.255.254

Spoiler: oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11401
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = Tnk_Polen
protocol = mouse
device = /dev/ttyUSB0
caid = 0B01
detect = cd
mhz = 357
cardmhz = 368
ident = 0B01:000000
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1

Spoiler: oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11401
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user =linuxsatsupport
pwd =
group = 1,
uniq = 3
au = 1

 

[Verdi-Fan]

Stell mal die Maus - von der Karte aus betrachtet zum USB Kabel - auf: Unten - Unten - Oben - Oben (-1)
Das wären dann beim letzten Schalter nicht 600 sondern sogar 800 mhz
Im Reader entsprechend anpassen
mhz = 800
Und dann OSCAM neu starten und ggf. nochmal das LOG zeigen.

 

[terencehill2205]

Wie ist es mit der einstellung von cardmhz = 368
bleibt die so ?

 

[Verdi-Fan]

Kannst so lassen ...

 

[terencehill2205]

Hi
Ich Poste noch mal das Live Log da ich mir nicht sicher bin was passiert ist.
Es ist aber was passiert. Und ich muss dazu sagen das ich noch keinen Reciver konfgurirt habe um zu testen ob alles hell wird.

Spoiler: Live log

• 2018/04/12 07:02:43 00000000 s (main) System name = Linux
• 2018/04/12 07:02:43 00000000 s (main) Host name = raspberrypi
• 2018/04/12 07:02:43 00000000 s (main) Release = 4.9.35-v7+
• 2018/04/12 07:02:43 00000000 s (main) Version = #1014 SMP Fri Jun 30 14:47:43 BST 2017
• 2018/04/12 07:02:43 00000000 s (main) Machine = armv7l
• 2018/04/12 07:02:43 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 23667
• 2018/04/12 07:02:43 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
• 2018/04/12 07:02:43 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/04/12 07:02:43 00000000 s (main) signal handling initialized
• 2018/04/12 07:02:43 00000000 s (led) LED support is not active. Can't detect machine type.
• 2018/04/12 07:02:43 00000000 s (reader) Tnk_Polen [mouse] creating thread for device /dev/ttyUSB0
• 2018/04/12 07:02:43 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/04/12 07:02:43 00000000 s (main) waiting for local card init
• 2018/04/12 07:02:43 7D04C305 h (webif) webif: decompressed 176696 bytes back into 434464 bytes
• 2018/04/12 07:02:43 7D04C305 h (webif) HTTP Server running. ip=0.0.0.0 port=1234
• 2018/04/12 07:02:43 62C11437 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75438
• 2018/04/12 07:02:43 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 1 value 3b time_us 15165
• 2018/04/12 07:02:43 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 2 value 24 time_us 16318
• 2018/04/12 07:02:43 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 3 value 00 time_us 23
• 2018/04/12 07:02:43 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 4 value 30 time_us 19
• 2018/04/12 07:02:43 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 5 value 42 time_us 20
• 2018/04/12 07:02:43 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 6 value 30 time_us 19
• 2018/04/12 07:02:43 62C11437 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 7 value 30 time_us 19
• 2018/04/12 07:02:43 62C11437 r (reader) Tnk_Polen [mouse] Buffers readed 7 bytes total time_us 107248
• 2018/04/12 07:02:43 62C11437 r (reader) Tnk_Polen [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=800, cardmhz=368)
• 2018/04/12 07:02:44 62C11437 r (reader) Tnk_Polen [mouse] card detected
• 2018/04/12 07:02:44 62C11437 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75433
• 2018/04/12 07:02:45 62C11437 r (reader) Tnk_Polen [mouse] ATR: 3B 24 00 30 42 30 30
• 2018/04/12 07:02:45 62C11437 r (reader) Tnk_Polen [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
• 2018/04/12 07:02:45 62C11437 r (reader) Tnk_Polen [mouse] Setting baudrate to 21505 bps
• 2018/04/12 07:02:45 62C11437 r (reader) Tnk_Polen [mouse] Calculated work ETU is 46.50 us reader mhz = 800
• 2018/04/12 07:02:45 62C11437 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75414
• 2018/04/12 07:02:45 62C11437 r (reader) Tnk_Polen [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 8.00 MHz (specified in reader->mhz)
• 2018/04/12 07:02:47 62C11437 r (reader) Tnk_Polen [mouse] type: Conax, caid: 0B01, serial: ##########, hex serial: ########, card: v64
• 2018/04/12 07:02:47 62C11437 r (reader) Tnk_Polen [mouse] Providers: 1
• 2018/04/12 07:02:47 62C11437 r (reader) Tnk_Polen [mouse] Provider: 1 Provider-Id: 000000
• 2018/04/12 07:02:47 62C11437 r (reader) Tnk_Polen [mouse] Provider: 1 SharedAddress: ########
• 2018/04/12 07:02:47 62C11437 r (reader) Tnk_Polen [mouse] found card system conax
• 2018/04/12 07:02:47 62C11437 r (reader) Tnk_Polen [conax] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2018/04/12 07:03:12 00000000 s (main) init for all local cards done
• 2018/04/12 07:03:12 00000000 s (emmcache) loaded 0 emmcache records from /usr/local/etc/oscam.emmcache in 0 ms
• 2018/04/12 07:03:12 00000000 s (emmcache) loaded 0 emmstat records from /usr/local/etc/oscam.emmstat in 0 ms
• 2018/04/12 07:03:12 00000000 s (anticasc) anti cascading disabled
• 2018/04/12 07:03:12 7F88C957 c (client) plain dvbapi-client granted (linuxsatsupport, au=auto (1 reader))
• 2018/04/12 07:03:12 7F88C957 c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
• 2018/04/12 07:03:12 7F88C957 c (dvbapi) ERROR: Could not detect DVBAPI version.

 

[Verdi-Fan]

Du siehst ja selber den Unterschied:

ALT: 2018/04/11 23:41:06 62C11437 r (reader) Tnk_Polen [mouse] card initializing error

NEU: 2018/04/12 07:02:47 62C11437 r (reader) Tnk_Polen [mouse] found card system conax

 

[terencehill2205]

Sorry Habe es nicht gesehen. Danke
Kann ich jetzt den Reciver konfiguriren.
Oh man meine Augen. Vielen Dank ich lesen jetzt noch wie ich den Reciver hin bekomme.

 

[dodo83]

geht ganz einfach: HowTo - OScam Client Configs für CCcam Protokoll (VERY tiny & cute)

 

[terencehill2205]

Hallo Elite
Hallo Verdi-Fan
Hallo dodo83

Erste frage an Verdi-Fan wie kommst du denn auf 800Mhz versuche seit Stunden rauszufinden wie man selber auf die Lösung kommt finde aber keine. Wie kommt man auf die passende MHZ zahl wenn man Neuling ist? Oder Trail and Error alles durch testen ? Trozdem danke für die richtige antwort.

An dodo83 NICE Danke für den Link. In paar wochen flige ich nach Australien werde mir aus Spa´ß versuchen ne TV karte zu kaufen.

 

[terencehill2205]

Hallo Elite
Es stürzen zuviele Inforamtionen über mich ein. Darum ersuche ich nochmal um Hilfe.
Ich probier immer noch den RaspberryPi (Server) mit dem Gigablue Reciver zu verbinden.
Dodo83 hat mir den Linke gepostet und es tut sich was. Aber was ???
Ich bekomme Angst wenn ich so die Logdateien beobachte.

Ich fange mit dem Raspberry PI ( Server ) an.

Spoiler: oscam,conf

[global]
logfile = /tmp/oscam.log
clienttimeout = 10
clientmaxidle = 160
nice = 1
maxlogsize = 2048
emmlogdir = /usr/local/logs/

[cache]

[cccam]
port = 12000
nodeid = 4ED8B44C10D4153E
version = 2.3.0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = local

[webif]
httpport = 1234
httpuser = XXXX
httppwd = XXXXX
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1

Spoiler: oscam.user

[account]
user =local
pwd =bene1
group = 1
uniq = 3
au = 1

Spoiler: oscam.server

[reader]
label = Tnk_Polen
protocol = mouse
device = /dev/ttyUSB0
caid = 0B01
detect = cd
mhz = 800
cardmhz = 368
ident = 0B01:000000
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1

Spoiler: Live Log

• 2018/04/27 05:12:02 00000000 s (main) System name = Linux
• 2018/04/27 05:12:02 00000000 s (main) Host name = raspberrypi
• 2018/04/27 05:12:02 00000000 s (main) Release = 4.9.35-v7+
• 2018/04/27 05:12:02 00000000 s (main) Version = #1014 SMP Fri Jun 30 14:47:43 BST 2017
• 2018/04/27 05:12:02 00000000 s (main) Machine = armv7l
• 2018/04/27 05:12:02 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 4182
• 2018/04/27 05:12:02 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
• 2018/04/27 05:12:02 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/04/27 05:12:02 00000000 s (main) signal handling initialized
• 2018/04/27 05:12:02 00000000 s (led) LED support is not active. Can't detect machine type.
• 2018/04/27 05:12:02 00000000 s (net) cccam: initialized (fd=5, port=12000)
• 2018/04/27 05:12:02 00000000 s (reader) Tnk_Polen [mouse] creating thread for device /dev/ttyUSB0
• 2018/04/27 05:12:02 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/04/27 05:12:02 00000000 s (main) waiting for local card init
• 2018/04/27 05:12:02 1CBB9201 h (webif) webif: decompressed 176696 bytes back into 434464 bytes
• 2018/04/27 05:12:02 1CBB9201 h (webif) HTTP Server running. ip=0.0.0.0 port=1234
• 2018/04/27 05:12:02 6AA092F6 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75439
• 2018/04/27 05:12:02 6AA092F6 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 1 value 3b time_us 15038
• 2018/04/27 05:12:02 6AA092F6 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 2 value 24 time_us 16319
• 2018/04/27 05:12:02 6AA092F6 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 3 value 00 time_us 22
• 2018/04/27 05:12:02 6AA092F6 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 4 value 30 time_us 20
• 2018/04/27 05:12:02 6AA092F6 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 5 value 42 time_us 19
• 2018/04/27 05:12:02 6AA092F6 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 6 value 30 time_us 20
• 2018/04/27 05:12:02 6AA092F6 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 7 value 30 time_us 19
• 2018/04/27 05:12:03 6AA092F6 r (reader) Tnk_Polen [mouse] Buffers readed 7 bytes total time_us 107122
• 2018/04/27 05:12:03 6AA092F6 r (reader) Tnk_Polen [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=800, cardmhz=368)
• 2018/04/27 05:12:03 6AA092F6 r (reader) Tnk_Polen [mouse] card detected
• 2018/04/27 05:12:03 6AA092F6 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75428
• 2018/04/27 05:12:05 6AA092F6 r (reader) Tnk_Polen [mouse] ATR: 3B 24 00 30 42 30 30
• 2018/04/27 05:12:05 6AA092F6 r (reader) Tnk_Polen [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
• 2018/04/27 05:12:05 6AA092F6 r (reader) Tnk_Polen [mouse] Setting baudrate to 21505 bps
• 2018/04/27 05:12:05 6AA092F6 r (reader) Tnk_Polen [mouse] Calculated work ETU is 46.50 us reader mhz = 800
• 2018/04/27 05:12:05 6AA092F6 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75419
• 2018/04/27 05:12:05 6AA092F6 r (reader) Tnk_Polen [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 8.00 MHz (specified in reader->mhz)
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [mouse] type: Conax, caid: 0B01, serial: ##########, hex serial: ########, card: v64
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [mouse] Providers: 1
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [mouse] Provider: 1 Provider-Id: 000000
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [mouse] Provider: 1 SharedAddress: ########
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [mouse] found card system conax
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [conax] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [conax] Package: 1, id: 1010, classes: 0100C000, date: 2015/01/01 - 2015/01/31, name: ITI Neovision
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [conax] Package: 2, id: 1010, classes: 0100C000, date: 2014/12/01 - 2014/12/31, name: ITI Neovision
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [conax] Package: 3, id: 1020, classes: 01000000, date: 2011/06/01 - 2011/06/30, name: ITI VOD 1
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [conax] Package: 4, id: 1020, classes: 01000001, date: 2009/04/01 - 2009/04/30, name: ITI VOD 1
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [conax] Package: 5, id: 1050, classes: 01000014, date: 2018/04/01 - 2018/04/30, name: ITI 2 Neovision
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [conax] Package: 6, id: 1050, classes: 01000014, date: 2018/02/01 - 2018/02/28, name: ITI 2 Neovision
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [conax] Package: 7, id: 1060, classes: 01000000, date: 2016/11/01 - 2016/11/30, name:
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [conax] Package: 8, id: 1060, classes: 01000000, date: 2016/10/01 - 2016/10/31, name:
• 2018/04/27 05:12:06 6AA092F6 r (reader) Tnk_Polen [conax] ready for requests
• 2018/04/27 05:12:07 00000000 s (main) init for all local cards done
• 2018/04/27 05:12:07 00000000 s (emmcache) loaded 0 emmcache records from /usr/local/etc/oscam.emmcache in 0 ms
• 2018/04/27 05:12:07 00000000 s (emmcache) loaded 0 emmstat records from /usr/local/etc/oscam.emmstat in 0 ms
• 2018/04/27 05:12:07 00000000 s (anticasc) anti cascading disabled
• 2018/04/27 05:12:07 62C11437 c (client) plain dvbapi-client granted (local, au=auto (1 reader))
• 2018/04/27 05:12:07 62C11437 c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
• 2018/04/27 05:12:07 62C11437 c (dvbapi) ERROR: Could not detect DVBAPI version.
• 2018/04/27 05:13:59 5797ECFB c (client) client(762FF460) duplicate user 'local' from 192.168.178.26 (prev 0.0.0.0) set to fake (uniq=3)
• 2018/04/27 05:13:59 5797ECFB c (client) encrypted cccam-client 192.168.178.26 granted (local, au=auto (1 reader))
• 2018/04/27 05:14:40 5797ECFB c (ecm) local (0B01@000000/0000/427B/76:CFA4B3493120A31A7B27A9769A5B6E69): timeout (10 ms) by Tnk_Polen
• 2018/04/27 05:14:52 5797ECFB c (-) -- Skipped 1 duplicated log lines --
• 2018/04/27 05:14:52 5797ECFB c (ecm) local (0B01@000000/0000/427B/76:59B013982AF2B0823FC6168F093EA492): timeout (10 ms) by Tnk_Polen
• 2018/04/27 05:15:19 5797ECFB c (-) -- Skipped 1 duplicated log lines --

SO und hier die Config vom Gigablue

Spoiler: oscam.conf gigablue

[global]

[cccam]
port = 12000
reshare = 0
version = 2.3.0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local

[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httppollrefresh = 10
#httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0
httpuser = oscam
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1

Spoiler: oscam.user

[account]
user = local
pwd =bene1
group = 1
uniq = 3
au = 1

Spoiler: oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11353
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = Tnk_Polen
protocol = internal
device = /dev/sci1
caid = 0B01
detect = cd
mhz = 500
cardmhz = 368
ident = 0B01:000000
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1

[reader]
label = emulator
enable = 0
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

[reader]
label = Remote-CCcam
protocol = cccam
device = 192.168.178.79,12000
user = local
password = bene1
group = 1
cccversion = 2.3.0
cccwantemu = 1
ccckeepalive = 1

Spoiler: Livelog GB

• 2018/05/05 20:00:59 00000000 s (main) System name = Linux
• 2018/05/05 20:00:59 00000000 s (main) Host name = gbquadplus
• 2018/05/05 20:00:59 00000000 s (main) Release = 4.8.3
• 2018/05/05 20:00:59 00000000 s (main) Version = #2 SMP Fri Mar 9 13:26:44 CET 2018
• 2018/05/05 20:00:59 00000000 s (main) Machine = mips
• 2018/05/05 20:00:59 00000000 s (main) Stb model = gbquadplus
• 2018/05/05 20:00:59 00000000 s (main) Stb vumodel = vuultimo
• 2018/05/05 20:00:59 00000000 s (main) Stb boxtype = gigablue
• 2018/05/05 20:00:59 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 6627
• 2018/05/05 20:00:59 00000000 s (emu) OSCam-Emu version 735
• 2018/05/05 20:00:59 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/05/05 20:00:59 00000000 s (main) signal handling initialized
• 2018/05/05 20:00:59 00000000 s (net) cccam: initialized (fd=4, port=12000)
• 2018/05/05 20:00:59 00000000 s (reader) Tnk_Polen [internal] creating thread for device /dev/sci1
• 2018/05/05 20:00:59 00000000 s (reader) Remote-CCcam [cccam] creating thread for device 192.168.178.79
• 2018/05/05 20:00:59 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/05/05 20:00:59 00000000 s (main) waiting for local card init
• 2018/05/05 20:00:59 30FD4B8E p (reader) 192.168.178.79: resolved ip=192.168.178.79
• 2018/05/05 20:00:59 30FD4B8E p (reader) Remote-CCcam [cccam] connecting to 192.168.178.79:12000
• 2018/05/05 20:00:59 679461B2 r (reader) Tnk_Polen [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=368)
• 2018/05/05 20:00:59 679461B2 r (reader) Tnk_Polen [internal] Reader sci internal, detected box type: gigablue
• 2018/05/05 20:00:59 60FB9D37 h (webif) webif: decompressed 176982 bytes back into 435560 bytes
• 2018/05/05 20:00:59 60FB9D37 h (webif) HTTP Server running. ip=0.0.0.0 port=83
• 2018/05/05 20:00:59 30FD4B8E p (reader) Remote-CCcam [cccam] proxy initialized, server 192.168.178.79:12000
• 2018/05/05 20:01:00 00000000 s (main) init for all local cards done
• 2018/05/05 20:01:00 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
• 2018/05/05 20:01:00 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
• 2018/05/05 20:01:00 00000000 s (anticasc) anti cascading disabled
• 2018/05/05 20:01:00 2CF6DA80 c (client) plain dvbapi-client granted (local, au=auto (3 reader))
• 2018/05/05 20:01:00 2CF6DA80 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv_emu/oscam.ccache
• 2018/05/05 20:01:00 2CF6DA80 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit
  
• 2018/05/05 20:01:05 2CF6DA80 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0100 ECM_PID: 0D09 PROVID: 000068 PBM: FFFFFFFEF77FFFF DATE: 5-5-2018
• 2018/05/05 20:01:05 2CF6DA80 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1813 ECM_PID: 0D09 PROVID: 000068
• 2018/05/05 20:01:05 2CF6DA80 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0B01 ECM_PID: 0C41 PROVID: 000000
• 2018/05/05 20:01:05 2CF6DA80 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 1803 ECM_PID: 0D6D PROVID: 000000
• 2018/05/05 20:01:05 2CF6DA80 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1861 ECM_PID: 0E35 PROVID: 000000
• 2018/05/05 20:01:05 2CF6DA80 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 0500 ECM_PID: 0DD1 PROVID: 032A00
• 2018/05/05 20:01:05 2CF6DA80 c (dvbapi) Demuxer 0 ecmpid 6 CAID: 1884 ECM_PID: 0CA5 PROVID: 000000
• 2018/05/05 20:01:05 2CF6DA80 c (dvbapi) Demuxer 0 ecmpid 7 CAID: 186C ECM_PID: 0E53 PROVID: 000000
• 2018/05/05 20:01:05 2CF6DA80 c (dvbapi) Demuxer 0 found 8 ECMpids and 10 STREAMpids in caPMT
• 2018/05/05 20:01:05 2CF6DA80 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2018/05/05 20:01:05 2CF6DA80 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0B01 PROVID 000000 ECMPID 0C41 ANY CHID PMTPID 040D VPID 0216
• 2018/05/05 20:01:05 2CF6DA80 c (dvbapi) Demuxer 0 found 8 ECMpids and 10 STREAMpids in PMT
• 2018/05/05 20:01:05 2CF6DA80 c (ecm) local (0B01@000000/0000/3ABD/76:AA95547A6D8F45A66D300067E7FC52E0): not found (22 ms) by Remote-CCcam
• 2018/05/05 20:01:06 2CF6DA80 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 7 disabled ecmpids!
• 2018/05/05 20:01:06 2CF6DA80 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2018/05/05 20:01:06 2CF6DA80 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0B01 PROVID 000000 ECMPID 0C41 ANY CHID PMTPID 040D VPID 0216
• 2018/05/05 20:01:07 2CF6DA80 c (ecm) local (0B01@000000/0000/3ABD/76:7E2E24D73F118D54BA766FE6146208D3): rejected (1 ms) by Remote-CCcam
• 2018/05/05 20:01:07 2CF6DA80 c (-) -- Skipped 1 duplicated log lines --
• 2018/05/05 20:01:07 2CF6DA80 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 7 disabled ecmpids!
• 2018/05/05 20:01:07 2CF6DA80 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2018/05/05 20:01:08 2CF6DA80 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0B01 PROVID 000000 ECMPID 0C41 ANY CHID PMTPID 040D VPID 0216
• 2018/05/05 20:01:08 2CF6DA80 c (ecm) local (0B01@000000/0000/3ABD/76:7E2E24D73F118D54BA766FE6146208D3): rejected (1 ms) by Remote-CCcam

Ich verstehe das so das er den Reader nicht findet ?

 

[Derek Buegel]

1. Den User im RPI "local" zu nennen ist nicht gut, da der locale User im Receiver ja "local heißt.
2. Der PI braucht keine [dvbapi], da er keinen Tuner hat.

Trag mal im PI den User so ein

Spoiler: oscam.user RPI

[account]
user =gigablue
pwd =bene1
group = 1
uniq = 3
au = 1

und entsprechend beim Receiver so, den Proxy:

Spoiler: oscam.server Receiver

[reader]
label = Remote-CCcam
protocol = cccam
device = 192.168.178.79,12000
user = gigablue
password = bene1
group = 1
cccversion = 2.3.0
cccwantemu = 1
ccckeepalive = 1

oscam neu startenund Logs posten.

MfG

PS. Boxtype "box type: gigablue" gibt es nicht. In die [dvbapi] beim Client dreambox eintragen.

 

[terencehill2205]

Spoiler: Live Log PI

• 2018/04/27 06:00:25 00000000 s (main) System name = Linux
• 2018/04/27 06:00:25 00000000 s (main) Host name = raspberrypi
• 2018/04/27 06:00:25 00000000 s (main) Release = 4.9.35-v7+
• 2018/04/27 06:00:25 00000000 s (main) Version = #1014 SMP Fri Jun 30 14:47:43 BST 2017
• 2018/04/27 06:00:25 00000000 s (main) Machine = armv7l
• 2018/04/27 06:00:25 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 11972
• 2018/04/27 06:00:25 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
• 2018/04/27 06:00:25 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/04/27 06:00:25 00000000 s (main) signal handling initialized
• 2018/04/27 06:00:25 00000000 s (led) LED support is not active. Can't detect machine type.
• 2018/04/27 06:00:25 00000000 s (net) cccam: initialized (fd=5, port=12000)
• 2018/04/27 06:00:25 00000000 s (reader) Tnk_Polen [mouse] creating thread for device /dev/ttyUSB0
• 2018/04/27 06:00:25 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/04/27 06:00:25 00000000 s (main) waiting for local card init
• 2018/04/27 06:00:25 1CBB9201 h (webif) webif: decompressed 176696 bytes back into 434464 bytes
• 2018/04/27 06:00:25 1CBB9201 h (webif) HTTP Server running. ip=0.0.0.0 port=1234
• 2018/04/27 06:00:25 6AA092F6 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75440
• 2018/04/27 06:00:25 6AA092F6 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 1 value 3b time_us 14929
• 2018/04/27 06:00:25 6AA092F6 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 2 value 24 time_us 14933
• 2018/04/27 06:00:25 6AA092F6 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 3 value 00 time_us 24
• 2018/04/27 06:00:25 6AA092F6 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 4 value 30 time_us 23
• 2018/04/27 06:00:25 6AA092F6 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 5 value 42 time_us 23
• 2018/04/27 06:00:25 6AA092F6 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 6 value 30 time_us 23
• 2018/04/27 06:00:25 6AA092F6 r (reader) Tnk_Polen [mouse] Flush readed byte Nr 7 value 30 time_us 24
• 2018/04/27 06:00:25 6AA092F6 r (reader) Tnk_Polen [mouse] Buffers readed 7 bytes total time_us 106334
• 2018/04/27 06:00:25 6AA092F6 r (reader) Tnk_Polen [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=800, cardmhz=368)
• 2018/04/27 06:00:26 6AA092F6 r (reader) Tnk_Polen [mouse] card detected
• 2018/04/27 06:00:26 6AA092F6 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75424
• 2018/04/27 06:00:27 6AA092F6 r (reader) Tnk_Polen [mouse] ATR: 3B 24 00 30 42 30 30
• 2018/04/27 06:00:27 6AA092F6 r (reader) Tnk_Polen [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
• 2018/04/27 06:00:27 6AA092F6 r (reader) Tnk_Polen [mouse] Setting baudrate to 21505 bps
• 2018/04/27 06:00:27 6AA092F6 r (reader) Tnk_Polen [mouse] Calculated work ETU is 46.50 us reader mhz = 800
• 2018/04/27 06:00:27 6AA092F6 r (reader) Tnk_Polen [mouse] Buffers readed 0 bytes total time_us 75422
• 2018/04/27 06:00:27 6AA092F6 r (reader) Tnk_Polen [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 8.00 MHz (specified in reader->mhz)
• 2018/04/27 06:00:28 6AA092F6 r (reader) Tnk_Polen [mouse] type: Conax, caid: 0B01, serial: ##########, hex serial: ########, card: v64
• 2018/04/27 06:00:28 6AA092F6 r (reader) Tnk_Polen [mouse] Providers: 1
• 2018/04/27 06:00:28 6AA092F6 r (reader) Tnk_Polen [mouse] Provider: 1 Provider-Id: 000000
• 2018/04/27 06:00:28 6AA092F6 r (reader) Tnk_Polen [mouse] Provider: 1 SharedAddress: ########
• 2018/04/27 06:00:28 6AA092F6 r (reader) Tnk_Polen [mouse] found card system conax
• 2018/04/27 06:00:28 6AA092F6 r (reader) Tnk_Polen [conax] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2018/04/27 06:00:29 6AA092F6 r (reader) Tnk_Polen [conax] Package: 1, id: 1010, classes: 0100C000, date: 2015/01/01 - 2015/01/31, name: ITI Neovision
• 2018/04/27 06:00:29 6AA092F6 r (reader) Tnk_Polen [conax] Package: 2, id: 1010, classes: 0100C000, date: 2014/12/01 - 2014/12/31, name: ITI Neovision
• 2018/04/27 06:00:29 6AA092F6 r (reader) Tnk_Polen [conax] Package: 3, id: 1020, classes: 01000000, date: 2011/06/01 - 2011/06/30, name: ITI VOD 1
• 2018/04/27 06:00:29 6AA092F6 r (reader) Tnk_Polen [conax] Package: 4, id: 1020, classes: 01000001, date: 2009/04/01 - 2009/04/30, name: ITI VOD 1
• 2018/04/27 06:00:29 6AA092F6 r (reader) Tnk_Polen [conax] Package: 5, id: 1050, classes: 01000014, date: 2018/05/01 - 2018/05/31, name: ITI 2 Neovision
• 2018/04/27 06:00:29 6AA092F6 r (reader) Tnk_Polen [conax] Package: 6, id: 1050, classes: 01000014, date: 2018/04/01 - 2018/04/30, name: ITI 2 Neovision
• 2018/04/27 06:00:29 6AA092F6 r (reader) Tnk_Polen [conax] Package: 7, id: 1060, classes: 01000000, date: 2016/11/01 - 2016/11/30, name:
• 2018/04/27 06:00:29 6AA092F6 r (reader) Tnk_Polen [conax] Package: 8, id: 1060, classes: 01000000, date: 2016/10/01 - 2016/10/31, name:
• 2018/04/27 06:00:29 6AA092F6 r (reader) Tnk_Polen [conax] ready for requests
• 2018/04/27 06:00:29 00000000 s (main) init for all local cards done
• 2018/04/27 06:00:29 00000000 s (emmcache) loaded 56 emmcache records from /usr/local/etc/oscam.emmcache in 2 ms
• 2018/04/27 06:00:29 00000000 s (emmcache) loaded 56 emmstat records from /usr/local/etc/oscam.emmstat in 0 ms
• 2018/04/27 06:00:29 00000000 s (anticasc) anti cascading disabled
• 2018/04/27 06:00:29 62C11437 c (client) plain dvbapi-client granted (anonymous, au=off)
• 2018/04/27 06:00:29 62C11437 c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
• 2018/04/27 06:00:29 62C11437 c (dvbapi) ERROR: Could not detect DVBAPI version.
• 2018/04/27 06:00:29 014BAE2C c (client) anonymous disconnected from 192.168.178.26
• 2018/04/27 06:00:41 3B898824 c (client) encrypted cccam-client 192.168.178.26 granted (gigablue, au=auto (1 reader))
• 2018/04/27 06:00:42 3B898824 c (ecm) gigablue (0B01@000000/0000/3ABD/76:E3AEC5509122BBA3185A7A7F46FAA687): timeout (11 ms) by Tnk_Polen
• 2018/04/27 06:00:54 3B898824 c (ecm) gigablue (0B01@000000/0000/3ABD/766F4C39885E7658DF1A537A8EAF4A39C): timeout (10 ms) by Tnk_Polen
• 2018/04/27 06:01:05 3B898824 c (ecm) gigablue (0B01@000000/0000/3ABD/76:C7E9610E4AA0497889F376EA66F3C125): timeout (10 ms) by Tnk_Polen

Spoiler: Live Log Gigablue

• 2018/05/05 20:28:40 00000000 s (main) System name = Linux
• 2018/05/05 20:28:40 00000000 s (main) Host name = gbquadplus
• 2018/05/05 20:28:40 00000000 s (main) Release = 4.8.3
• 2018/05/05 20:28:40 00000000 s (main) Version = #2 SMP Fri Mar 9 13:26:44 CET 2018
• 2018/05/05 20:28:40 00000000 s (main) Machine = mips
• 2018/05/05 20:28:40 00000000 s (main) Stb model = gbquadplus
• 2018/05/05 20:28:40 00000000 s (main) Stb vumodel = vuultimo
• 2018/05/05 20:28:40 00000000 s (main) Stb boxtype = gigablue
• 2018/05/05 20:28:40 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 14875
• 2018/05/05 20:28:40 00000000 s (emu) OSCam-Emu version 735
• 2018/05/05 20:28:40 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/05/05 20:28:40 00000000 s (main) signal handling initialized
• 2018/05/05 20:28:40 00000000 s (net) cccam: initialized (fd=4, port=12000)
• 2018/05/05 20:28:40 00000000 s (reader) Tnk_Polen [internal] creating thread for device /dev/sci1
• 2018/05/05 20:28:40 00000000 s (reader) emulator [emu] creating thread for device emulator
• 2018/05/05 20:28:40 00000000 s (reader) Remote-CCcam [cccam] creating thread for device 192.168.178.79
• 2018/05/05 20:28:40 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/05/05 20:28:40 00000000 s (main) waiting for local card init
• 2018/05/05 20:28:40 679461B2 r (reader) Tnk_Polen [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=368)
• 2018/05/05 20:28:40 679461B2 r (reader) Tnk_Polen [internal] Reader sci internal, detected box type: gigablue
• 2018/05/05 20:28:40 30FD4B8E r (emu) Key file not found in: /usr/keys/oscam_atv_emu
• 2018/05/05 20:28:40 30FD4B8E r (emu) Key file not found in: /var/keys
• 2018/05/05 20:28:40 60FB9D37 p (reader) 192.168.178.79: resolved ip=192.168.178.79
• 2018/05/05 20:28:40 60FB9D37 p (reader) Remote-CCcam [cccam] connecting to 192.168.178.79:12000
• 2018/05/05 20:28:40 30FD4B8E r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2018/05/05 20:28:40 00000000 (emu) INFO: FFDecsa parallel mode = 64
• 2018/05/05 20:28:40 71C889B7 h (webif) webif: decompressed 176982 bytes back into 435560 bytes
• 2018/05/05 20:28:40 71C889B7 h (webif) HTTP Server running. ip=0.0.0.0 port=83
• 2018/05/05 20:28:40 60FB9D37 p (reader) Remote-CCcam [cccam] proxy initialized, server 192.168.178.79:12000
• 2018/05/05 20:28:41 30FD4B8E r (reader) emulator [emu] card detected
• 2018/05/05 20:28:42 30FD4B8E r (reader) emulator [emu] found card system emu
• 2018/05/05 20:28:42 30FD4B8E r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2018/05/05 20:28:42 30FD4B8E r (emu) Key file not found in: /usr/keys/oscam_atv_emu
• 2018/05/05 20:28:42 30FD4B8E r (emu) Key file not found in: /var/keys
• 2018/05/05 20:28:43 00000000 s (main) init for all local cards done
• 2018/05/05 20:28:43 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
• 2018/05/05 20:28:43 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
• 2018/05/05 20:28:43 00000000 s (anticasc) anti cascading disabled
• 2018/05/05 20:28:43 70D27981 c (client) plain dvbapi-client granted (local, au=auto (3 reader))
• 2018/05/05 20:28:43 70D27981 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv_emu/oscam.ccache
• 2018/05/05 20:28:43 70D27981 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
• 2018/05/05 20:28:46 70D27981 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0100 ECM_PID: 0D09 PROVID: 000068 PBM: FFFFFFFEF77FFFF DATE: 5-5-2018
• 2018/05/05 20:28:46 70D27981 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1813 ECM_PID: 0D09 PROVID: 000068
• 2018/05/05 20:28:46 70D27981 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0B01 ECM_PID: 0C41 PROVID: 000000
• 2018/05/05 20:28:46 70D27981 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 1803 ECM_PID: 0D6D PROVID: 000000
• 2018/05/05 20:28:46 70D27981 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1861 ECM_PID: 0E35 PROVID: 000000
• 2018/05/05 20:28:46 70D27981 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 0500 ECM_PID: 0DD1 PROVID: 032A00
• 2018/05/05 20:28:46 70D27981 c (dvbapi) Demuxer 0 ecmpid 6 CAID: 1884 ECM_PID: 0CA5 PROVID: 000000
• 2018/05/05 20:28:46 70D27981 c (dvbapi) Demuxer 0 ecmpid 7 CAID: 186C ECM_PID: 0E53 PROVID: 000000
• 2018/05/05 20:28:46 70D27981 c (dvbapi) Demuxer 0 found 8 ECMpids and 10 STREAMpids in caPMT
• 2018/05/05 20:28:46 70D27981 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2018/05/05 20:28:46 70D27981 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0B01 PROVID 000000 ECMPID 0C41 ANY CHID PMTPID 040D VPID 0216
• 2018/05/05 20:28:46 70D27981 c (dvbapi) Demuxer 0 found 8 ECMpids and 10 STREAMpids in PMT
• 2018/05/05 20:28:47 70D27981 c (ecm) local (0B01@000000/0000/3ABD/76:494FFEAC8221D31BA8B93F5D9CEA89CF): not found (22 ms) by Remote-CCcam
• 2018/05/05 20:28:47 70D27981 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 7 disabled ecmpids!
• 2018/05/05 20:28:47 70D27981 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2018/05/05 20:28:47 70D27981 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0B01 PROVID 000000 ECMPID 0C41 ANY CHID PMTPID 040D VPID 0216

Willst du mir sagen das ich den dvbapi punkt in der oscam.config löschen kann ?

 

[terencehill2205]

Ich glaube es läuft Ich glaube es läuft wirklich Wie lange kann es dauern bis es hell wird. Es wurde grade Hell in der Sekunde habe ich den Oscam im Pi restartet.
Jetzt steht das bild erst mal. Ich warte jetzt nochmal wieder paar minuten.
Mal sehen ob es wieder hell wird

 

[Derek Buegel]

anonymous disconnected from 192.168.178.26

Die Verbindung wird getrennt. da stimmt noch was mit der Gigablue nicht.

Hast Du noch eine TNK in der GB? Wenn nicht deaktiviere den Reader mal mit "enable = 0"

MfG

 

[Smiley007]

oscam.conf
[global]
logfile = /tmp/oscam.log
clienttimeout = 10
clientmaxidle = 160
nice = 1
maxlogsize = 2048
emmlogdir = /usr/local/logs/

schmeisse das rote auf dem Raspi raus und starte die Oscam auf dem Raspi neu