Easymouse 2 Pineinstellungen

[RvM]

Ich möchte an meiner neuen 920er in der Easymouse 2 meine HD02 unter OSCAM laufen lassen. Welche Hardwareeinstellungen an der Easymouse muss ich bei vier kleinen Schaltern einstellen?

 

[pehedima]

Bei 3,57 Mhz (oscam.server)

unten, unten, unten, egal

bei 6Mhz (oscam.server)

unten, unten, oben, oben

 

[RvM]

Und wie muss die Karte rein? Chip oben oder unten?

 

[pehedima]

nach unten.

 

[RvM]

OSCAM läuft - bekomme aber einen Reader Device Error
So sieht der HDplus Teil meiner Config aus:

Spoiler: oscam.server

[reader]
label = hdplus
protocol = mouse
device = /dev/ttyUSB0
caid = 1843
services = hdplus
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
ecmwhitelist = 1843:89
mhz = 600
cardmhz = 368
autospeed = 1
group = 1
emmcache = 1,3,2,0

 

[pehedima]

Poste bitte deinen kompletten Configs und die oscam.log vom oscam start an

 

[RvM]

Spoiler: .conf

[global]
logfile = /etc/tuxbox/config/log/oscam.log
emmlogdir = /etc/tuxbox/config/log/

nice = -1
waitforcards = 1

[cccam]
port = 12000
nodeid = 5E92452C101F13C4
version = 2.1.4

[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox

[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httprefresh = 30
httpallowed = 172.16.0.0-172.16.0.255

[cs378x]
port = 1111

Spoiler: .dvbapi

P: 1843
P: 098C
P: 0D05
I: 0

Spoiler: komplette .server

[reader]
label = V14
protocol = internal
device = /dev/sci0
autospeed = 1
caid = 098C
services = skywelt,skyfilm,skyfilmhd,sky3d
boxid = 12345678
ins7e11 = 15
fix07=1
detect = CD
cardmhz = 2700
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = hdplus
protocol = mouse
device = /dev/ttyUSB0
caid = 1843
services = hdplus
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
ecmwhitelist = 1843:89
mhz = 600
cardmhz = 368
autospeed = 1
group = 1
emmcache = 1,3,2,0

[reader]
label = orfemu
protocol = constcw
device = 1
caid = 0D95,0D05
group = 1

Spoiler: .user

[account]
user = local
group = 1
au = V14,hdplus


[account]
user = dream
pwd = dream
group = 1
hostname = 172.16.0.6
cccmaxhops = 2
cccreshare = 0
au = 0

Spoiler: log

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Nov 8 10:50:53 2018
-------------------------------------------------------------------------------
2018/11/08 10:50:53 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11437 (arm-newnigma2-linux-gnueabihf-libusb)
2018/11/08 10:50:53 00000000 s (main) System name = Linux
2018/11/08 10:50:53 00000000 s (main) Host name = dm920
2018/11/08 10:50:53 00000000 s (main) Release = 3.14-1.17-dm920
2018/11/08 10:50:53 00000000 s (main) Version = #2 SMP Fri Feb 9 16:42:57 UTC 2018
2018/11/08 10:50:53 00000000 s (main) Machine = armv7l
2018/11/08 10:50:53 00000000 s (main) Stb model = dm920
2018/11/08 10:50:53 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 440
2018/11/08 10:50:53 00000000 s (config) services reloaded: 0 services freed, 6 services loaded, rejected 0
2018/11/08 10:50:53 00000000 s (emu) OSCam-Emu version 774
2018/11/08 10:50:53 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2018/11/08 10:50:53 00000000 s (main) signal handling initialized
2018/11/08 10:50:53 00000000 s (config) 4 provid's loaded
2018/11/08 10:50:53 00000000 s (config) 39 tier-id's loaded
2018/11/08 10:50:53 00000000 s (net) cs378x: initialized (fd=5, port=1111)
2018/11/08 10:50:53 00000000 s (net) cccam: initialized (fd=6, port=12000)
2018/11/08 10:50:53 00000000 s (reader) V14 [internal] creating thread for device /dev/sci0
2018/11/08 10:50:53 00000000 s (reader) hdplus [mouse] creating thread for device /dev/ttyUSB0
2018/11/08 10:50:53 00000000 s (reader) orfemu [constcw] creating thread for device 1
2018/11/08 10:50:53 00000000 s (reader) emulator [emu] creating thread for device emulator
2018/11/08 10:50:53 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/11/08 10:50:53 00000000 s (main) waiting for local card init
2018/11/08 10:50:53 578FCCCF p (constcw) Local reader: orfemu (file: 1)
2018/11/08 10:50:53 578FCCCF p (constcw) ERROR: Can't open 1 (errno=2 No such file or directory)
2018/11/08 10:50:53 578FCCCF p (reader) orfemu [constcw] proxy initialized, server 1:0
2018/11/08 10:50:53 32D04F73 r (reader) V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)
2018/11/08 10:50:53 32D04F73 r (reader) V14 [internal] Reader sci internal, detected box type: dm920
2018/11/08 10:50:53 4EB329EF r (reader) hdplus [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2018/11/08 10:50:53 4EB329EF r (reader) hdplus [mouse] Cannot open device: /dev/ttyUSB0
2018/11/08 10:50:53 2224424E r (emu) Stream key delayer initialized
2018/11/08 10:50:53 2224424E r (emu) Stream relay server initialized
2018/11/08 10:50:53 2224424E r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2018/11/08 10:50:53 0233E0CC h (webif) webif: decompressed 177615 bytes back into 436952 bytes
2018/11/08 10:50:53 0233E0CC h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2018/11/08 10:50:53 00000000 (emu) INFO: FFDecsa parallel mode = 32
2018/11/08 10:50:54 2224424E r (reader) emulator [emu] card detected
2018/11/08 10:50:55 4EB329EF r (reader) hdplus [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2018/11/08 10:50:55 4EB329EF r (reader) hdplus [mouse] Cannot open device: /dev/ttyUSB0
2018/11/08 10:50:55 2224424E r (reader) emulator [emu] found card system emu
2018/11/08 10:50:55 2224424E r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/11/08 10:50:55 2224424E r (emu) Key file not found in: /etc/tuxbox/config
2018/11/08 10:50:55 2224424E r (emu) Key file not found in: /var/keys
2018/11/08 10:50:55 2224424E r (emu) Total keys in memory: W:0 V:0 N:0 I:0 S:0 F:0 P:0 D:0 T:0
2018/11/08 10:50:57 4EB329EF r (reader) hdplus [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2018/11/08 10:50:57 4EB329EF r (reader) hdplus [mouse] Cannot open device: /dev/ttyUSB0
2018/11/08 10:50:59 4EB329EF r (reader) hdplus [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2018/11/08 10:50:59 4EB329EF r (reader) hdplus [mouse] Cannot open device: /dev/ttyUSB0
2018/11/08 10:51:01 4EB329EF r (reader) hdplus [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2018/11/08 10:51:01 4EB329EF r (reader) hdplus [mouse] Cannot open device: /dev/ttyUSB0
2018/11/08 10:51:03 4EB329EF r (reader) hdplus [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2018/11/08 10:51:03 4EB329EF r (reader) hdplus [mouse] Cannot open device: /dev/ttyUSB0
2018/11/08 10:51:05 4EB329EF r (reader) hdplus [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2018/11/08 10:51:05 4EB329EF r (reader) hdplus [mouse] Cannot open device: /dev/ttyUSB0
2018/11/08 10:51:07 4EB329EF r (reader) hdplus [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2018/11/08 10:51:07 4EB329EF r (reader) hdplus [mouse] Cannot open device: /dev/ttyUSB0
2018/11/08 10:51:09 4EB329EF r (reader) hdplus [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2018/11/08 10:51:09 4EB329EF r (reader) hdplus [mouse] Cannot open device: /dev/ttyUSB0
2018/11/08 10:51:11 4EB329EF r (reader) hdplus [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2018/11/08 10:51:11 4EB329EF r (reader) hdplus [mouse] Cannot open device: /dev/ttyUSB0
2018/11/08 10:51:13 4EB329EF r (reader) hdplus [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2018/11/08 10:51:13 4EB329EF r (reader) hdplus [mouse] Cannot open device: /dev/ttyUSB0
2018/11/08 10:51:14 00000000 s (main) init for all local cards done
2018/11/08 10:51:14 00000000 s (anticasc) anti cascading disabled
2018/11/08 10:51:14 663D0811 c (client) plain dvbapi-client granted (local, au=on (2 reader))
2018/11/08 10:51:14 663D0811 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2018/11/08 10:51:14 663D0811 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/11/08 10:51:14 663D0811 c (dvbapi) Demuxer 0 found 0 ECMpids and 9 STREAMpids in caPMT
2018/11/08 10:51:14 663D0811 c (dvbapi) Demuxer 0 found 0 ECMpids and 9 STREAMpids in PMT

 

[Emperor288]

/dev/ttyUSB0

versuche mal ttyUSB1 oder steck die Mouse an den anderen USB-Port

 

[RvM]

ttyUSB1 bringt nichts

Spoiler: oscam.log

2018/11/08 14:33:05 27F2AC3C c (dvbapi) Demuxer 0 found 0 ECMpids and 9 STREAMpids in PMT
2018/11/08 14:35:14 27F2AC3C c (dvbapi) Demuxer 0 stop descrambling program number 2B66 (FFFE@FFFFFE:2B66 unknown)
2018/11/08 14:35:15 27F2AC3C c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2018/11/08 14:35:15 27F2AC3C c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19CC PROVID: 000000
2018/11/08 14:35:15 27F2AC3C c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2018/11/08 14:35:15 27F2AC3C c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1ACC PROVID: 000000
2018/11/08 14:35:15 27F2AC3C c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2018/11/08 14:35:15 27F2AC3C c (dvbapi) Demuxer 0 ecmpid 5 CAID: 0500 ECM_PID: 0109 PROVID: 051900
2018/11/08 14:35:15 27F2AC3C c (dvbapi) Demuxer 0 ecmpid 6 CAID: 06CB ECM_PID: 0078 PROVID: 000000
2018/11/08 14:35:15 27F2AC3C c (dvbapi) Demuxer 0 ecmpid 7 CAID: 186A ECM_PID: 1FCC PROVID: 000000
2018/11/08 14:35:15 27F2AC3C c (dvbapi) Demuxer 0 ecmpid 8 CAID: 186D ECM_PID: 1FCD PROVID: 000000
2018/11/08 14:35:15 27F2AC3C c (dvbapi) Demuxer 0 ecmpid 9 CAID: 098D ECM_PID: 0108 PROVID: 000000
2018/11/08 14:35:15 27F2AC3C c (dvbapi) Demuxer 0 found 10 ECMpids and 7 STREAMpids in caPMT
2018/11/08 14:35:15 27F2AC3C c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2018/11/08 14:35:15 27F2AC3C c (dvbapi) Demuxer 0 found 10 ECMpids and 7 STREAMpids in PMT
2018/11/08 14:35:19 27F2AC3C c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2018/11/08 14:36:29 27F2AC3C c (-) -- Skipped 13 duplicated log lines --

 

[Kind regards]

dann mal dmesg | grep -i usb
und schauen was los ist

 

[RvM]

Spoiler: dmesg

[ 0.022982] usbcore: registered new interface driver usbfs
[ 0.023012] usbcore: registered new interface driver hub
[ 0.023069] usbcore: registered new device driver usb
[ 0.032655] brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device T ree
[ 0.151076] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
[ 0.151525] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.151531] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 0.151535] usb usb1: Product: xHCI Host Controller
[ 0.151539] usb usb1: Manufacturer: Linux 3.14-1.17-dm920 xhci-hcd
[ 0.151543] usb usb1: SerialNumber: f0471000.xhci_v2
[ 0.151867] hub 1-0:1.0: USB hub found
[ 0.152018] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
[ 0.152158] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.152163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 0.152168] usb usb2: Product: xHCI Host Controller
[ 0.152172] usb usb2: Manufacturer: Linux 3.14-1.17-dm920 xhci-hcd
[ 0.152176] usb usb2: SerialNumber: f0471000.xhci_v2
[ 0.152450] hub 2-0:1.0: USB hub found
[ 0.152860] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
[ 0.168127] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
[ 0.168231] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.168236] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 0.168241] usb usb3: Product: EHCI Host Controller
[ 0.168245] usb usb3: Manufacturer: Linux 3.14-1.17-dm920 ehci_hcd
[ 0.168249] usb usb3: SerialNumber: f0470300.ehci_v2
[ 0.168520] hub 3-0:1.0: USB hub found
[ 0.168747] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
[ 0.184126] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
[ 0.184225] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.184230] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 0.184234] usb usb4: Product: EHCI Host Controller
[ 0.184238] usb usb4: Manufacturer: Linux 3.14-1.17-dm920 ehci_hcd
[ 0.184241] usb usb4: SerialNumber: f0470500.ehci_v2
[ 0.184498] hub 4-0:1.0: USB hub found
[ 0.184833] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
[ 0.239242] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.239246] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 0.239251] usb usb5: Product: BRCM OHCI controller
[ 0.239255] usb usb5: Manufacturer: Linux 3.14-1.17-dm920 ohci_hcd
[ 0.239259] usb usb5: SerialNumber: f0470400.ohci_v2
[ 0.239521] hub 5-0:1.0: USB hub found
[ 0.239753] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
[ 0.294236] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.294241] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 0.294246] usb usb6: Product: BRCM OHCI controller
[ 0.294249] usb usb6: Manufacturer: Linux 3.14-1.17-dm920 ohci_hcd
[ 0.294253] usb usb6: SerialNumber: f0470600.ohci_v2
[ 0.294518] hub 6-0:1.0: USB hub found
[ 0.294778] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.294822] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.294944] usbcore: registered new interface driver usb-storage
[ 0.295396] usbcore: registered new interface driver btusb
[ 0.358321] usbcore: registered new interface driver usbhid
[ 0.358324] usbhid: USB HID core driver
[ 0.901225] usb 6-1: new full-speed USB device number 2 using ohci-brcm
[ 1.110184] usb 6-1: New USB device found, idVendor=0403, idProduct=6001
[ 1.110194] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.110200] usb 6-1: Product: FT232R USB UART
[ 1.110205] usb 6-1: Manufacturer: FTDI
[ 1.110209] usb 6-1: SerialNumber: A90770OA
[ 216.916527] usb 6-1: USB disconnect, device number 2
[ 225.178786] usb 5-1: new full-speed USB device number 2 using ohci-brcm
[ 225.372809] usb 5-1: New USB device found, idVendor=0403, idProduct=6001
[ 225.372819] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 225.372824] usb 5-1: Product: FT232R USB UART
[ 225.372829] usb 5-1: Manufacturer: FTDI
[ 225.372833] usb 5-1: SerialNumber: A90770OA
[ 291.243055] usb 5-1: USB disconnect, device number 2
[ 304.034781] usb 6-1: new full-speed USB device number 3 using ohci-brcm
[ 304.229808] usb 6-1: New USB device found, idVendor=0403, idProduct=6001
[ 304.229819] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 304.229824] usb 6-1: Product: FT232R USB UART
[ 304.229830] usb 6-1: Manufacturer: FTDI
[ 304.229834] usb 6-1: SerialNumber: A90770OA

 

[pehedima]

Scheint unvollständig.

Poste mal bitte den Output von:

dmesg | grep tty

 

[RvM]

Spoiler

Scheint unvollständig.

Poste mal bitte den Output von:

dmesg | grep tty

da kommt gar nix

hab es nochmal mit dmesg | grep -i usb versucht

Spoiler: dmesg

[ 3412.069565] usb 6-1: USB disconnect, device number 2
[ 3537.620450] usb 6-1: new full-speed USB device number 3 using ohci-brcm
[ 3537.814491] usb 6-1: New USB device found, idVendor=0403, idProduct=6001
[ 3537.814502] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3537.814507] usb 6-1: Product: FT232R USB UART
[ 3537.814511] usb 6-1: Manufacturer: FTDI
[ 3537.814516] usb 6-1: SerialNumber: A90770OA

 

[Kind regards]

device = /dev/ttyUSB6 schon probiert ?

 

[RvM]

So, habe alles ausprobiert - bleibt dunkel.
Zur Sicherheit habe ich die server und user Datei mal minimiert.
Bei der Easymouse habe ich die Pins, wie beschrieben auf unten, untern, oben, oben
Die HD02 habe ich, Chip nach unten, bis zum Anschlag drin
und so sehen jetzt meine Configs aus:

Spoiler: .user

[account]
user = local
group = 1
au = V14,HD02

Spoiler: .server

[reader]
label = HD02
protocol = mouse
device = /dev/tty/USB6
autospeed = 0
fallback = 1
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
ecmwhitelist = 1830:92
ecmheaderwhitelist = 80308F078D,81308F078D
detect = cd
mhz = 600
group = 1
emmcache = 1,3,2,0

Spoiler: oscam.log

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Nov 8 16:39:45 2018
-------------------------------------------------------------------------------
2018/11/08 16:39:45 00000000 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/oscam.emmstat in 0 ms
2018/11/08 16:39:45 00000000 s (anticasc) anti cascading disabled
2018/11/08 16:39:45 00000000 >> OSCam << cardserver log switched, version 1.20_svn, build r11437 (arm-newnigma2-linux-gnueabihf-libusb)
2018/11/08 16:39:45 6881AE2E c (client) plain dvbapi-client granted (local, au=on (1 reader))
2018/11/08 16:39:45 6881AE2E c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2018/11/08 16:39:45 6881AE2E c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/11/08 16:39:46 6881AE2E c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2018/11/08 16:39:46 6881AE2E c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19CC PROVID: 000000
2018/11/08 16:39:46 6881AE2E c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2018/11/08 16:39:46 6881AE2E c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1ACC PROVID: 000000
2018/11/08 16:39:46 6881AE2E c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2018/11/08 16:39:46 6881AE2E c (dvbapi) Demuxer 0 ecmpid 5 CAID: 0500 ECM_PID: 0109 PROVID: 051900
2018/11/08 16:39:46 6881AE2E c (dvbapi) Demuxer 0 ecmpid 6 CAID: 06CB ECM_PID: 0078 PROVID: 000000
2018/11/08 16:39:46 6881AE2E c (dvbapi) Demuxer 0 ecmpid 7 CAID: 186A ECM_PID: 1FCC PROVID: 000000
2018/11/08 16:39:46 6881AE2E c (dvbapi) Demuxer 0 ecmpid 8 CAID: 186D ECM_PID: 1FCD PROVID: 000000
2018/11/08 16:39:46 6881AE2E c (dvbapi) Demuxer 0 ecmpid 9 CAID: 098D ECM_PID: 0108 PROVID: 000000
2018/11/08 16:39:46 6881AE2E c (dvbapi) Demuxer 0 found 10 ECMpids and 7 STREAMpids in caPMT
2018/11/08 16:39:46 6881AE2E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2018/11/08 16:39:46 6881AE2E c (dvbapi) Demuxer 0 found 10 ECMpids and 7 STREAMpids in PMT
2018/11/08 16:39:50 6881AE2E c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!