dvb viewer mit cardsharing

[oliver5]

AW: dvb viewer mit cardsharing

Dann versuche mal die daten in den mdplugin ordener.
Hast du die soft dafür.

Ich habe eine skystar hd damit geht alles sogar hd.

So siht meine config in der dream aus.


SERVER LISTEN PORT : 0
#WEBINFO USERNAME : DBox
#WEBINFO PASSWORD : DBox2
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME : 5
#OSD USERNAME : DBox
#OSD PASSWORD : DBox2
SHOW TIMING : yes
MINI OSD : yes
MINIMUM CLIENT VERSION : 2.0.5

N: 127.0.0.1 34000 Dreambox1 pass 01 02 03 04 05 06 07 08 09 10 11 12 13 1

meine xml siht so aus.

<newCSconfig>
<readers name="Multicam">
<device>

<name>Multicam</name>

<type>sci</type>

<mhz>600</mhz>

<node>/dev/sci1</node>

<parity>none</parity>

<reset>normal</reset>

<export>Yes</export>

<enabled>Yes</enabled>

<blocksa>No</blocksa>

<blockua>No</blockua>

<blockga>No</blockga>





<irdetomode>0</irdetomode>

<irdeto-camkey>0000000000000000</irdeto-camkey>

<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>

<crypto-special>No</crypto-special>

<PTShandshake>No</PTShandshake>

<carddetect>yes</carddetect>

<newcamd_port>34000</newcamd_port>

<autosid>Yes</autosid>

<Seca-PPV>no</Seca-PPV>


<priority>round</priority>
</device>
</readers>
<cache>

<emm>10</emm>

<ecm>30</ecm>
</cache>
<httpd>
<server>
<port>9080</port>
<enabled>yes</enabled>
</server>
<user>

<name>admin</name>


<password>newcs</password>


<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>

<level>internal</level>

<type>all</type>

<output>file</output>

<console_options></console_options>

<logfile>/tmp/debug.ncs</logfile>

<file_options></file_options>

<udp_host>192.168.0.204</udp_host>

<udp_port>1000</udp_port>

<udp_options></udp_options>


<tcp_port>1001</tcp_port>

<tcp_options></tcp_options>
</debug>
<newcamdserver>

<enabled>Yes</enabled>

<user><name>küche</name><password>cccam</password><hostname></hostname><port></port><au>yes</au><spider>no</spider><sidoverride>no</sidoverride><rate>0</rate></user><user><name>kinder</name><password>cccam2</password><hostname></hostname><port></port><au>yes</au><spider>no</spider><sidoverride>no</sidoverride><rate>0</rate></user><user><name>pc</name><password>pass</password><hostname></hostname><port></port><au>on</au><spider>on</spider><sidoverride>on</sidoverride><rate>0</rate><status>access</status></user><user><name>marvin</name><password>marvin2</password><hostname></hostname><port></port><au>yes</au><spider>yes</spider><sidoverride>no</sidoverride><rate>0</rate></user> <name>newcs</name>

<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>

<user>

<name>Dreambox1</name>

<password>pass</password>

<au>on</au>

<sidoverride>off</sidoverride>


<spider>Yes</spider>

<cardlevel>1</cardlevel>
</user>
</newcamdserver>
</newCSconfig>


Im anhang noch mein acamd

Dann deine ip anpassen.

 

[octopussy9]

AW: dvb viewer mit cardsharing

danke erstmal, jetzt sollten wir hier anknüpfen:

-von welcher Software sprichst du mit dem ordner mdplugin

wie gesagt, Hardware:
dm 800 als Server (cccam 2.0.11/newcs 1.65)
als client: meine Wintv nova hd S2

Software: dvbviewer oder eben was geht

hab etwas verständnis für mich:
ich muss jetzt langsam Schritt für Schritt machen

DM 800(mit Abokarte) läuft im internen Netz mit einer dm100 und einer DM 500 sehr gut

jetzt ist auf dem PC die WinTV installiert, jetzt Schrittchen für Schrittchen

 

[oliver5]

AW: dvb viewer mit cardsharing

Hier in Dvbviever kopieren.

vorher natürlich entpacken.

Wenn er fragt alles überschreiben dann ja.

Kopiere acamd in mdplugin ordner.

Wie gesagt du musst deine ip adressen anpassen.

 

[octopussy9]

AW: dvb viewer mit cardsharing

Hallo,
ich hab das softcsa plugin direkt in den Ordner DVB viewer kopiert,
da geht der DVB viewer noch

wenn ich in den Mdplugin ordner die acamd dateien kopiere startet DVB viewer nicht mehr druch, d.h. der Balken am Anfang bleibt bei ca. 2/3 hängen

 

[oliver5]

AW: dvb viewer mit cardsharing

wenn er hängen bleibt sucht er verbiendung zum server.
Die er aber nicht findet.
Habe doch schon geschrieben ip anpassen.
Schicke am besten mal deine cccam.config deine xml.acamd.

 

[octopussy9]

AW: dvb viewer mit cardsharing

so meister, anbei 3 Inhalte:

mein server hat die IP 192.168.0.3

1. cccam.cfg

2. newcs.xml

3. "Schicke am besten mal deine cccam.config deine xml.acamd. " das fette, da weiß ich nicht, was du meinst

1.die cccam.cfg:

F: dream 111111
F: dreambox 222222
N: 127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14


und jetzt die newcs.xml (die hatte ich komplett irgendwoher übernommen)
<?xml version="1.0"?>
<NEWCSCONFIG>
<READERS name="Card Readers">
<DEVICE>
</USER>
</NEWCAMDSERVER>
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around )
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
-->
<NEWCSCONFIG>
<GLOBALS>
<!-- valid value for listening-ip are:
IPv4 adress of local interface.
<listening-ip>127.0.0.1</listening-ip> -->
</GLOBALS>
<READERS name="SCI">
<DEVICE>
<NAME>Lower Cardreader</NAME>
<TYPE>sci</TYPE>
<MHZ>600</MHZ>
<NODE>/dev/sci0</NODE>


odd</PARITY>
<RESET>normal</RESET>
<EXPORT>Yes</EXPORT>
<ENABLED>Yes</ENABLED>
<BLOCKSA>No</BLOCKSA>
<BLOCKUA>No</BLOCKUA>
<BLOCKGA>No</BLOCKGA>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<IRDETO-CAMKEY>0000000000000000</IRDETO-CAMKEY>
<IRDETO-CAMKEY-DATA>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</IRDETO-CAMKEY-DATA>
<CRYPTO-SPECIAL>No</CRYPTO-SPECIAL>
<IPK>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</IPK>
<UCPK>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</UCPK>


No</PTSHANDSHAKE>
<CARDDETECT>yes</CARDDETECT>
<NEWCAMD_PORT>34000</NEWCAMD_PORT>
<AUTOSID>Yes</AUTOSID>
<SECA-PPV>no</SECA-PPV>


0000</PINCODE>


round</PRIORITY>
</DEVICE>
</READERS>
<CACHE>
<!-- valid value for emm are:
0-255 - Number of EMM's to cache. -->
<EMM>20</EMM>
<!-- valid value for ecm are:
0-255 - Number of ECM's to cache.
-1 - Dynamic ECM Cache. -->
<ECM>-1</ECM>
</CACHE>
<HTTPD>
<SERVER><!-- Port to accept connections on -->


8080</PORT>
<ENABLED>yes</ENABLED>
</SERVER>
<USER>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<NAME>newcs</NAME>

<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->


newcs</PASSWORD>

<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<ACCESSLEVEL>admin</ACCESSLEVEL>
</USER>
</HTTPD>
<DEBUG>
<!-- valid value for password:
Max 25 characters and minimum 8, this is case-sensitive. -->


NewCSpwd</PASSWORD>
<!-- valid value for mode:</p> simple, advanced - Set TCP-Console to advanced mode to get access to
potentially dangerous features.-->
<MODE>simple</MODE>

<!-- valid value for level are:
normal, verbose, spam - How extensive debug should be. -->
<LEVEL>normal</LEVEL>
<!-- valid value for type are:
Init, general, ecm, emm, net, all - Section of debug that should be displayed. -->
<TYPE>general</TYPE>
<!-- valid value for output are:
Console, udp, tcp, file, all - Where to show debug. -->
<OUTPUT>console,tcp</OUTPUT>
<!-- console_options are so you can set own loglevel/type for console-logger:
Should hold level and type-tags like above. -->
<CONSOLE_OPTIONS>normal,init</CONSOLE_OPTIONS>
<!-- valid value for logfile are:
Path and filename - Where to write debug logs if file or all is chosed in output. -->
<LOGFILE>/hdd/newcs.txt</LOGFILE>
<!-- file_options are so you can set own loglevel/type for file-logger:
Should hold level and type-tags like above. -->
<FILE_OPTIONS>spam,all</FILE_OPTIONS>
<!-- valid value for udp_host are:
IP-address or DNS-name - Where to send debug if udp or all is chosed in output. -->
<UDP_HOST>192.168.1.10</UDP_HOST>
<!-- valid value for udp_port are:
0,65535 - Which port to send the udp packets. -->
<UDP_PORT>1000</UDP_PORT>
<!-- udp_options are so you can set own loglevel/type for udp-logger:
Should hold level and type-tags like above. -->
<UDP_OPTIONS>normal,init</UDP_OPTIONS>

<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<TCP_PORT>1001</TCP_PORT>
<!-- tcp_options are so you can set own loglevel/type for tcp-logger:
Should hold level and type-tags like above. -->
<TCP_OPTIONS>normal,init</TCP_OPTIONS>
</DEBUG>
<NEWCAMDSERVER>
<!-- valid value for enabled are:
Yes, No - Enable or Disable newcamd server. -->
<ENABLED>Yes</ENABLED>
<!-- valid value for name are:
Any name - Used to identify server to remote clients,
if the remote client isnt newcamd, this field have no purpouse. -->
<NAME>newcs</NAME>
<!-- valid value for deskey are:
any 14x2 numbers - Used to encrypt the communication between
the client and the server. -->
<DESKEY>01 02 03 04 05 06 07 08 09 10 11 12 13 14</DESKEY>
<!-- Notes about users:
The first user doesnt have au without beeing it set to on (unlike newcamd cardserver).
You can add as many user-sections as you want, just put them under eachother. -->
<USER>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<NAME>dummy</NAME>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->


dummy</PASSWORD>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->


21000</PORT>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<AU>on</AU>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<SIDOVERRIDE>off</SIDOVERRIDE>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<SPIDER>No</SPIDER>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<RATE>2</RATE>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<CARDLEVEL>1</CARDLEVEL>
</USER>
<USER>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<NAME>mpcs</NAME>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->


dummy</PASSWORD>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->


21000</PORT>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<AU>on</AU>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<SIDOVERRIDE>off</SIDOVERRIDE>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<SPIDER>No</SPIDER>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<RATE>2</RATE>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<CARDLEVEL>1</CARDLEVEL>
</USER>
</NEWCAMDSERVER>
<CHAMELEON2>
<SERVER>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->


1234</PORT>
<!-- enable or disable the server, valid values are yes/no -->
<ENABLED>No</ENABLED>
</SERVER>


<!-- Connect to remote Chamelon server with the below credentials -->
<HOSTNAME>localhost</HOSTNAME>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->


1234</PORT>
<!-- valid value for userfile are:

Any username you'd like - Used for client to logon (its case sensitive). -->
<NAME>myname</NAME>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->


mypassword</PASSWORD>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<REALM>myShares</REALM>
</PEER>
<USER>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<NAME>myname</NAME>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->


mypassword</PASSWORD>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<REALM>myShares</REALM>
</USER>

 

[oliver5]

AW: dvb viewer mit cardsharing

kopiere dir die die daten die ich weiter oben schon geschrieben habe.

Dami geht es bei mir.

 

[octopussy9]

AW: dvb viewer mit cardsharing

im thread 91:
muss es das nicht heißen 01...............14 ??

 

[octopussy9]

AW: dvb viewer mit cardsharing

habe jetzt die Daten reinkopiert, aber der viewer bleibt immer noch nach ca. 2/3 laden stehen

 

[oliver5]

AW: dvb viewer mit cardsharing

Haste dein ip der dreambox in acamd eingetragen.
und user passwort

wird in cardclient.cfg geändert

Tip schalt mal deine Firewall ab.

zb.
newcamd:192.168.178.20:34000:1/0000/0000:userasswort:010203040506070809101112131

 

[octopussy9]

AW: dvb viewer mit cardsharing

Wir sind glaube auf einem gutem Weg, irgendwas stimmt aber noch nicht in den Einstellungen nicht:
Ich habe immer die Probleme mit den Passwörtern und usern, einmal muss es in die cccam dann in die newcs dann in die acamd, egal das muss ja sein, ich hab die Logik noch nicht im Kopf.

nachdem ich in die Acamd die IP meines servers geschrieben habe, bleibt der DVBviewer nur noch 4 s beim start bei ca. 2/3 stehen dann ist er geladen

im Monitor der acamd stehen aber Fehler, die habe ich dir mal angehängt:




11:21:01: cardclients: registering cardclient Camd35
11:21:07: systems: registering CA system Cardclient, pri -15, ident 1000
11:21:07: cardclients: registering cardclient Gbox
11:21:07: cardclients: registering cardclient Newcamd
11:21:07: cardclients: registering cardclient Radegast
11:21:07: systems: registering CA system SC-Irdeto, pri -10, ident 1001
11:21:07: feature: using feature SMARTCARD
11:21:07: registering Irdeto smartcard (id 49726474)
11:21:07: systems: registering CA system SC-Seca, pri -10, ident 1002
11:21:07: registering Seca smartcard (id 53656361)
11:21:07: systems: registering CA system SC-Viaccess, pri -10, ident 1003
11:21:07: registering Viaccess smartcard (id 56696173)
11:21:07: ACamd v0.5.1.0
11:21:07: loaders: registering loader KEY
11:21:07: Engine MD-API
11:21:07: ** registered systems:
11:21:07: ** SC-Viaccess (pri -10)
11:21:07: ** SC-Seca (pri -10)
11:21:08: ** SC-Irdeto (pri -10)
11:21:08: ** Cardclient (pri -15)
11:21:08: loading cardclient config from C:\Programme\DVBViewer\MDPlugins\cardclient.conf
11:21:08: now using protocol version 525 (cdLen=8)
11:21:08: hostname=192.168.0.3 port=34000 emm=1 emmCaids 0100/ffff
11:21:08: Newcamd: username=Dreambox1 password=pass key=0102030405060708091011121314
11:21:08: Login attemp (1)
11:21:08: netwatch up
11:21:08: Netwatcher thread started (tid=56340544)
11:21:08: connecting to 192.168.0.3:34000/tcp (192.168.0.3)
11:21:08: socket: connect failed: No error
11:21:08: netwatch down
11:21:08: Login attemp (2)
11:21:08: netwatch up
11:21:08: connecting to 192.168.0.3:34000/tcp (192.168.0.3)
11:21:08: socket: connect failed: No error
11:21:08: netwatch down
11:21:08: Login attemp (3)
11:21:08: netwatch up
11:21:08: connecting to 192.168.0.3:34000/tcp (192.168.0.3)
11:21:08: socket: connect failed: No error
11:21:08: netwatch down
11:21:08: init of cardclient 'newcamd' failed
11:21:08: file 'C:\Programme\DVBViewer\MDPlugins\cardclient.conf' has error in line ' newcamd:192.168.0.3:34000:1/0100/ffffreambox1ass:0102030405060708091011121314'
11:21:08: now using protocol version 525 (cdLen=8)
11:21:08: hostname=192.168.0.3 port=34000 emm=1 emmCaids 0604/ffff
11:21:08: Newcamd: username=Dreambox1 password=pass key=0102030405060708091011121314
11:21:08: Login attemp (1)
11:21:08: netwatch up
11:21:08: connecting to 192.168.0.3:34000/tcp (192.168.0.3)
11:21:08: socket: connect failed: No error
11:21:08: netwatch down
11:21:08: Login attemp (2)
11:21:08: netwatch up
11:21:08: connecting to 192.168.0.3:34000/tcp (192.168.0.3)
11:21:08: socket: connect failed: No error
11:21:08: netwatch down
11:21:08: Login attemp (3)
11:21:08: netwatch up
11:21:08: connecting to 192.168.0.3:34000/tcp (192.168.0.3)
11:21:08: socket: connect failed: No error
11:21:08: netwatch down
11:21:08: init of cardclient 'newcamd' failed
11:21:08: file 'C:\Programme\DVBViewer\MDPlugins\cardclient.conf' has error in line ' newcamd:192.168.0.3:34000:1/0604/ffffreambox1ass:0102030405060708091011121314'
11:21:08: created 0 client(s)
11:21:08: loading smartcard data from C:\Programme\DVBViewer\MDPlugins\smartcard.conf
11:21:08: loading smartcard data from C:\Programme\DVBViewer\MDPlugins\smartcard.conf
11:21:08: no smartcard interface defined!
11:21:08: Ch: 97 - SoftCSA
11:21:08: Incomming PackageSize [184]
11:21:08: PMT: Cache file, search, not found PMT=0061 (AND SID=0017)
11:21:08: Could not attach this channel to a cardclient or a smartcard...
11:21:18: Ch: 97 - SoftCSA
11:21:18: PMT: Cache file, search, not found PMT=0061 (AND SID=0017)
11:21:18: Could not attach this channel to a cardclient or a smartcard...

 

[oliver5]

AW: dvb viewer mit cardsharing

user und das password muss in der newcs.xml und in der cardchlient.cfg gleich sein sonnst geht es nicht.



newcamd:192.168.0.3:34000:1/0000/0000cass:0102030405060708091011121314

siht deine cardclient.cfg so aus.

 

[octopussy9]

AW: dvb viewer mit cardsharing

Ich hab jetzt in meine cardclient.cfg geschrieben:
newcamd:192.168.0.3:34000:1/0000/0000cass:0102030405060708091011121314
(reicht die eine Zeile)

Ist das Richtig ? die Acamd schreibt immer was von:
PMT: Cache file, search, not found PMT=0061

mit den Einträgen in der newcs.xml komme ich nicht klar,kannst du mir da helfen??

 

[octopussy9]

AW: dvb viewer mit cardsharing

sind eigentlich die ganzen Einträge in der xml. und cfg notwendig, kann man das nicht auf ein Minimum beschränken ?

das versteht man das dann auch, irgendwie soll`s doch auch logisch sein

 

[oliver5]

AW: dvb viewer mit cardsharing

Versuche die noch mal
newcamd:192.168.0.3:34000:1/0100,0604/ffffcass:0102030405060708091011121

Die xml kannst du mit dem iexplorer bearbeiten.

gebe als adresse mal 192.168.0.3:9080 ein user: admin passwort: newcs

Da kannst du die user bearbeiten.