CS bin am Hängen :(

[szonic]

AW: CS bin am Hängen

Was steht denn im Syslog?
Deine Karte wird noch immer nicht erkannt!

Poste mal bitte Deine Config mit der Du arbeitest, und den Startlog beim booten.

Grüsse
szonic

 

[glory-1]

AW: CS bin am Hängen

Sie müssen registriert sein, um Links zu sehen.

running

welche config meist du ? und welches starterlog ?
sorry, bin totaler neuling auf dem gebiet :emoticon-0138-think

 

[ydnaso]

AW: CS bin am Hängen

Moin,
poste mal deine cccam.cfg...

Deine Karte wird nicht richtig erkannt...
Was haste überhaupt genau für eine Karte? S02?

 

[Vigor]

AW: CS bin am Hängen

@glory-1
Syslog findest du im Freetz unter Status.
Versuch es am Smargo mal mit der Kerneleinstellung auf "normal", statt "Dream".
Könnte bei der FB7240 die richtige Einstellung sein.

@ydnaso
Die cccam.cfg hat er im #6 gepostet.

Gruß
Vigor

 

[glory-1]

AW: CS bin am Hängen

hi,
config ost in absatz 6. hier mal das syslog

Spoiler

Jan 1 01:01:12 fritz syslog.info syslogd started: BusyBox v1.18.1
Jan 1 01:01:12 fritz user.notice kernel: klogd started: BusyBox v1.18.1 (2011-01-12 16:53:28 CET)
Jan 1 01:01:12 fritz user.notice kernel: Linux version 2.6.19.2 (3860) (gcc version 3.4.6) #3 Tue Sep 7 16:08:51 CEST 2010
Jan 1 01:01:12 fritz user.warn kernel: cpu-probe: Manufacturer MIPS
Jan 1 01:01:12 fritz user.warn kernel: mips-config1: JTAG pressent
Jan 1 01:01:12 fritz user.warn kernel: mips-config1: TLB size 16
Jan 1 01:01:12 fritz user.warn kernel: mips-config3: Vectored interrupts implmented
Jan 1 01:01:12 fritz user.warn kernel: CPU revision is: 00019068
Jan 1 01:01:12 fritz user.err kernel: [mips_clock] default 360000000 MHz
Jan 1 01:01:12 fritz user.warn kernel: [ur8_clk_set_emif] SDRAM Refresh 0x3a8 Timing 0x2214717 Bank 0x21 Async 0xc42c301
Jan 1 01:01:12 fritz user.err kernel: [ur8_pci_init]
Jan 1 01:01:12 fritz user.err kernel: [pci] default: 33 MHz
Jan 1 01:01:12 fritz user.err kernel: [setup_pci_master]
Jan 1 01:01:12 fritz user.err kernel: [setup_pci_slave]
Jan 1 01:01:12 fritz user.err kernel: Exposing 67108864 memory over PCI
Jan 1 01:01:12 fritz user.err kernel: Setup Complete, Enabling PCI Interface
Jan 1 01:01:12 fritz user.err kernel: PCI Interface Running
Jan 1 01:01:12 fritz user.err kernel: PCI controller initialized
Jan 1 01:01:12 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_nwss_dma level 2 escalator disabled (count 255, floor 7)
Jan 1 01:01:12 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_sar_pdsp level 2 escalator disabled (count 255, floor 7)
Jan 1 01:01:12 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_buffer_manager level 2 escalator disabled (count 255, floor 7)
Jan 1 01:01:12 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_usb level 5 escalator disabled (count 255, floor 7)
Jan 1 01:01:12 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_vlynq level 7 escalator disabled (count 255, floor 7)
Jan 1 01:01:12 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_pci level 5 escalator disabled (count 255, floor 7)
Jan 1 01:01:12 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_c55 level 3 escalator disabled (count 255, floor 7)
Jan 1 01:01:12 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_tdm level 0 escalator disabled (count 255, floor 7)
Jan 1 01:01:12 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_mips level 3 escalator disabled (count 255, floor 7)
Jan 1 01:01:12 fritz user.warn kernel: Determined physical RAM map:
Jan 1 01:01:12 fritz user.warn kernel: memory: 03f60000 @ 14000000 (usable)
Jan 1 01:01:12 fritz user.warn kernel: memory: 000a0000 @ 17f60000 (reserved)
Jan 1 01:01:12 fritz user.warn kernel: [init_bootmem]
Jan 1 01:01:12 fritz user.warn kernel: [free_bootmem]
Jan 1 01:01:12 fritz user.warn kernel: [reserve_bootmem]
Jan 1 01:01:12 fritz user.debug kernel: On node 0 totalpages: 98144
Jan 1 01:01:12 fritz user.err kernel: [mem_map-hack]: reduce size from 3145728 524288 Bytes
Jan 1 01:01:12 fritz user.err kernel: [mem_map-hack]: move map base from 0x94378000 to 0x940f8000
Jan 1 01:01:12 fritz user.debug kernel: DMA zone: 766 pages used for memmap
Jan 1 01:01:12 fritz user.debug kernel: DMA zone: 0 pages reserved
Jan 1 01:01:12 fritz user.debug kernel: DMA zone: 97378 pages, LIFO batch:31
Jan 1 01:01:12 fritz user.debug kernel: Normal zone: 0 pages used for memmap
Jan 1 01:01:12 fritz user.err kernel: [request_resource] Kernel code: start 0x14000000 < root->start 0x17f60000
Jan 1 01:01:12 fritz user.err kernel: [request_resource] Kernel data: start 0x14245da0 < root->start 0x17f60000
Jan 1 01:01:12 fritz user.warn kernel: Built 1 zonelists. Total pages: 97378
Jan 1 01:01:12 fritz user.notice kernel: Kernel command line: console=ttyS0,38400n8r
Jan 1 01:01:12 fritz user.warn kernel: Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Jan 1 01:01:12 fritz user.warn kernel: Primary data cache 16kB, 4-way, linesize 16 bytes.
Jan 1 01:01:12 fritz user.info kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 01:01:12 fritz user.info kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 01:01:12 fritz user.info kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 01:01:12 fritz user.info kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 01:01:12 fritz user.warn kernel: PID hash table entries: 2048 (order: 11, 8192 bytes)
Jan 1 01:01:12 fritz user.warn kernel: CPU frequency 360.00 MHz
Jan 1 01:01:12 fritz user.warn kernel: Using 180.000 MHz high precision timer.
Jan 1 01:01:12 fritz user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 01:01:12 fritz user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 01:01:12 fritz user.warn kernel: [free_all_bootmem]
Jan 1 01:01:12 fritz user.info kernel: Memory: 60416k/64896k available (2327k kernel code, 4456k reserved, 700k data, 144k init, 0k highmem)
Jan 1 01:01:12 fritz user.debug kernel: Calibrating delay loop... 359.62 BogoMIPS (lpj=1798144)
Jan 1 01:01:12 fritz user.warn kernel: Mount-cache hash table entries: 512
Jan 1 01:01:12 fritz user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 01:01:12 fritz user.info kernel: NET: Registered protocol family 16
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_init]
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_init] flashsize = 0x01000000 Byte 16 MBytes
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_init] mtd[0] = 0x90000000,0x90000000
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_init] mtd[1] = 0x90020000,0x90F80000
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_init] mtd[2] = 0x90000000,0x90020000
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_init] mtd[3] = 0x90F80000,0x90FC0000
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_init] mtd[4] = 0x90FC0000,0x91000000
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_init] mtd[5] = 0x90000000,0x90000000
Jan 1 01:01:12 fritz user.err kernel: pcibios_read_config: accessing present PCI slot : 14, where 0, size 4
Jan 1 01:01:12 fritz user.err kernel: Master and Slave Enabled
Jan 1 01:01:12 fritz user.info kernel: pktsched: using high resolution timer
Jan 1 01:01:12 fritz user.info kernel: NET: Registered protocol family 2
Jan 1 01:01:12 fritz user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 01:01:12 fritz user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 01:01:12 fritz user.warn kernel: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 01:01:12 fritz user.info kernel: TCP: Hash tables configured (established 16384 bind 8192)
Jan 1 01:01:12 fritz user.info kernel: TCP reno registered
Jan 1 01:01:12 fritz user.info kernel: squashfs: version 3.2 (2007/01/02) Phillip Lougher
Jan 1 01:01:12 fritz user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan 1 01:01:12 fritz user.warn kernel: fuse init (API version 7.8)
Jan 1 01:01:12 fritz user.info kernel: io scheduler noop registered (default)
Jan 1 01:01:12 fritz user.info kernel: avm_net_trace: Up and running.
Jan 1 01:01:12 fritz user.warn kernel: [avm] configured: watchdog event debug enable direct gpio
Jan 1 01:01:12 fritz user.warn kernel: AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0, build: Sep 7 2010 16:08:03)
Jan 1 01:01:12 fritz user.info kernel: Serial: 8250/16550 driver $Revision: 1.3 $ 1 ports, IRQ sharing disabled
Jan 1 01:01:12 fritz user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 15) is a UR8_UART
Jan 1 01:01:12 fritz user.err kernel: [cpmac] Version: 1.129 - Revision 790:1110 - Di 7.09.2010 16:08:39
Jan 1 01:01:12 fritz user.err kernel: [dectsync] inactive
Jan 1 01:01:12 fritz user.err kernel: [ar8216] index 0: 00:1f:3f:cb:ad:52
Jan 1 01:01:12 fritz user.warn kernel: Status: entry is valid and has been accessed since the last aging process DES 0x1
Jan 1 01:01:12 fritz user.err kernel: [ar8216] index 0: 00:50:9c:19:83:43
Jan 1 01:01:12 fritz user.warn kernel: Status: entry is valid and has been accessed since the last aging process DES 0x2
Jan 1 01:01:12 fritz user.err kernel: [cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
Jan 1 01:01:12 fritz user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan 1 01:01:12 fritz user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan 1 01:01:12 fritz user.notice kernel: physmap platform flash device: 01000001 at 10000000
Jan 1 01:01:12 fritz user.info kernel: physmap-flash.1: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 01:01:12 fritz user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 01:01:12 fritz user.warn kernel: physmap-flash.1: CFI does not contain boot bank location. Assuming top.
Jan 1 01:01:12 fritz user.notice kernel: number of CFI chips: 1
Jan 1 01:01:12 fritz user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 01:01:12 fritz user.notice kernel: RedBoot partition parsing not available
Jan 1 01:01:12 fritz user.warn kernel: [ur8_jffs2_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x97e143bc
Jan 1 01:01:12 fritz user.warn kernel: [ur8_jffs2_parser_function] try partition kernel (offset 0x20000 len 16121856)
Jan 1 01:01:12 fritz user.warn kernel: [ur8_jffs2_parser_function] magic 20031985 found @pos 0xe20000, size 1441792
Jan 1 01:01:12 fritz user.warn kernel: [ur8_squashfs_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x97e143bc
Jan 1 01:01:12 fritz user.warn kernel: [ur8_squashfs_parser_function] *p_mtd_pat->name filesystem
Jan 1 01:01:12 fritz user.warn kernel: [ur8_squashfs_parser_function] try partition kernel (offset 0x20000 len 16121856 blocksize=20000)
Jan 1 01:01:12 fritz user.warn kernel: [ur8_squashfs_parser_function] magic found @pos 0x119800
Jan 1 01:01:12 fritz user.notice kernel: 6 find_squashfs partitions found on MTD device physmap-flash.1
Jan 1 01:01:12 fritz user.notice kernel: Creating 6 MTD partitions on "physmap-flash.1":
Jan 1 01:01:12 fritz user.notice kernel: 0x00119800-0x00f80000 : "rootfs"
Jan 1 01:01:12 fritz user.warn kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_add_notifier] name rootfs
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_add_notifier] use rootfs
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_add_notifier] root device: /dev/mtdblock0 (rootfs)
Jan 1 01:01:12 fritz user.notice kernel: 0x00020000-0x00119800 : "kernel"
Jan 1 01:01:12 fritz user.warn kernel: mtd: partition "kernel" doesn't end on an erase block -- force read-only
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_add_notifier] name kernel
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_add_notifier] skip kernel
Jan 1 01:01:12 fritz user.notice kernel: 0x00000000-0x00020000 : "urlader"
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_add_notifier] name urlader
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_add_notifier] skip urlader
Jan 1 01:01:12 fritz user.notice kernel: 0x00f80000-0x00fc0000 : "tffs (1)"
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (1)
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (1)
Jan 1 01:01:12 fritz user.notice kernel: 0x00fc0000-0x01000000 : "tffs (2)"
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (2)
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (2)
Jan 1 01:01:12 fritz user.notice kernel: 0x00e20000-0x00f80000 : "jffs2"
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_add_notifier] name jffs2
Jan 1 01:01:12 fritz user.warn kernel: [ur8_mtd_add_notifier] skip jffs2
Jan 1 01:01:12 fritz user.warn kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
Jan 1 01:01:12 fritz user.err kernel: mtd-ram mtd-ram.2: no memory resource specified
Jan 1 01:01:12 fritz user.err kernel: [ur8_ram_mtd_set_rw] PLATRAM_RO
Jan 1 01:01:12 fritz user.warn kernel: mtd-ram: probe of mtd-ram.2 failed with error -2
Jan 1 01:01:12 fritz user.notice kernel: CAPI Subsystem Rev 1.1.2.8
Jan 1 01:01:12 fritz user.info kernel: TCP cubic registered
Jan 1 01:01:12 fritz user.info kernel: mcfw: IGMPv3 fast forwarding
Jan 1 01:01:12 fritz user.info kernel: NET: Registered protocol family 1
Jan 1 01:01:12 fritz user.info kernel: NET: Registered protocol family 10
Jan 1 01:01:12 fritz user.err kernel: [4294937501]maxrun: 1
Jan 1 01:01:12 fritz user.info kernel: IPv6 over IPv4 tunneling driver
Jan 1 01:01:12 fritz user.info kernel: NET: Registered protocol family 17
Jan 1 01:01:12 fritz user.info kernel: NET: Registered protocol family 8
Jan 1 01:01:12 fritz user.info kernel: NET: Registered protocol family 20
Jan 1 01:01:12 fritz user.warn kernel: MUSB UR8 pdev active!
Jan 1 01:01:12 fritz user.err kernel: PCI_STATUS_SET: 40000
Jan 1 01:01:12 fritz user.err kernel: PCI_STATUS_CLR: 40000
Jan 1 01:01:12 fritz user.err kernel: PCI_HOST_INT_EN: 0
Jan 1 01:01:12 fritz user.err kernel: PCI_HOST_INT_CLR: 0
Jan 1 01:01:12 fritz user.err kernel: PCI_BE_INT_En: 0
Jan 1 01:01:12 fritz user.err kernel: PCI_BE_INT_CLR: 0
Jan 1 01:01:12 fritz user.err kernel: [pci_int_init] done
Jan 1 01:01:12 fritz user.err kernel: [TFFS_Init] 1: mtd_number: 3 | mtd_number2: 4
Jan 1 01:01:12 fritz user.info kernel: Time: MIPS clocksource has been installed.
Jan 1 01:01:12 fritz user.err kernel: [get_mtd_device_wrapped] 1: 3
Jan 1 01:01:12 fritz user.err kernel: [get_mtd_device_wrapped] 2
Jan 1 01:01:12 fritz user.err kernel: [TFFS_Init] 3
Jan 1 01:01:12 fritz user.err kernel: [TFFS_Init] 4.0
Jan 1 01:01:12 fritz user.err kernel: [put_mtd_device_wrapped] 1
Jan 1 01:01:12 fritz user.err kernel: [put_mtd_device_wrapped] 2
Jan 1 01:01:12 fritz user.err kernel: [put_mtd_device_wrapped] 3
Jan 1 01:01:12 fritz user.err kernel: [get_mtd_device_wrapped] 1: 4
Jan 1 01:01:12 fritz user.err kernel: [get_mtd_device_wrapped] 2
Jan 1 01:01:12 fritz user.err kernel: [TFFS_Init] 5
Jan 1 01:01:12 fritz user.err kernel: [TFFS_Init] 6
Jan 1 01:01:12 fritz user.err kernel: [put_mtd_device_wrapped] 1
Jan 1 01:01:12 fritz user.err kernel: [put_mtd_device_wrapped] 2
Jan 1 01:01:12 fritz user.err kernel: [put_mtd_device_wrapped] 3
Jan 1 01:01:12 fritz user.err kernel: [get_mtd_device_wrapped] 1: 3
Jan 1 01:01:12 fritz user.err kernel: [get_mtd_device_wrapped] 2
Jan 1 01:01:12 fritz user.err kernel: [TFFS_Init] 7
Jan 1 01:01:12 fritz user.err kernel: [TFFS_Init] 8
Jan 1 01:01:12 fritz user.err kernel: [TFFS_Init] 9
Jan 1 01:01:12 fritz user.warn kernel: TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
Jan 1 01:01:12 fritz user.warn kernel: mount on mtd3 and mtd4 (double buffering)
Jan 1 01:01:12 fritz user.info kernel: Adam2 environment variables API installed.
Jan 1 01:01:12 fritz user.info kernel: [avm_new] push_button_gpio=25 value=0 enabled
Jan 1 01:01:12 fritz user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 01:01:12 fritz user.warn kernel: Freeing prom memory: 0kb freed
Jan 1 01:01:12 fritz user.info kernel: Freeing unused kernel memory: 144k freed
Jan 1 01:01:12 fritz user.warn kernel: AVM_WATCHDOG: System Init UEberwachung 240 Sekunden
Jan 1 01:01:12 fritz user.warn kernel: TFFS Name Table G
Jan 1 01:01:12 fritz user.warn kernel: led_modul_Fritz_Box_7240: module license '
Jan 1 01:01:12 fritz user.warn kernel: (C) Copyright 2008 by AVM
Jan 1 01:01:12 fritz user.warn kernel: ' taintskernel.
Jan 1 01:01:12 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 1 name power
Jan 1 01:01:12 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 9 name internet
Jan 1 01:01:12 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 27 name dect
Jan 1 01:01:12 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 28 name wlan
Jan 1 01:01:12 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 17 name dual1
Jan 1 01:01:12 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 35 name dual2
Jan 1 01:01:12 fritz user.err kernel: [BUTTON] no buttons defined - disable new button controls
Jan 1 01:01:12 fritz user.warn kernel: [piglet]use gpio-settings for 144
Jan 1 01:01:12 fritz user.info kernel: [avm_new]push_button_ctrl: gpio=23 value=0 enabled
Jan 1 01:01:12 fritz user.info kernel: [avm_new]push_button_ctrl:'Taster_4': enable=2 gpio=23 regaddr=00000000 button_type=0
Jan 1 01:01:12 fritz user.warn kernel: patch_dectfw: c008d000, totallen = 46765(b6ad)
Jan 1 01:01:12 fritz user.warn kernel: patch_dectfw: patch_adress: f0ff8 max_len: 26 with Version 2 Len: 17
Jan 1 01:01:12 fritz user.warn kernel: dect_loader: fast-bootmode
Jan 1 01:01:12 fritz user.warn kernel: *
Jan 1 01:01:12 fritz user.warn kernel: *******************************************************************************************
Jan 1 01:01:12 fritz user.warn kernel: dect144xx_file_process: upload of '/lib/modules/dectfw_secondlevel_488.hex' successfull
Jan 1 01:01:12 fritz user.err kernel: [piglet]bitfile for autodetect '/lib/modules/bitfile_isdn.bit'
Jan 1 01:01:12 fritz user.warn kernel: [piglet] clock from pll3(384000000)
Jan 1 01:01:12 fritz user.err kernel: [4294938551]maxrun: 2
Jan 1 01:01:12 fritz user.err kernel: [piglet] Read 72743 bytes total from file
Jan 1 01:01:12 fritz user.warn kernel: [piglet]TDM: FS: 8000 Hz CLK:2047990 Hz
Jan 1 01:01:12 fritz user.err kernel: [piglet] Read 72743 bytes total from file
Jan 1 01:01:12 fritz user.warn kernel: [piglet]TDM: FS: 8000 Hz CLK:2048010 Hz
Jan 1 01:01:12 fritz user.err kernel: [piglet]-> POTS-Mode
Jan 1 01:01:12 fritz user.info kernel: JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Jan 1 01:01:12 fritz user.info kernel: loop: loaded (max 8 devices)
Jan 1 01:01:12 fritz user.warn kernel: [avm_debug]redirect kernel-messages (/dev/debug)
Jan 1 01:01:12 fritz user.warn kernel: [pcmlink]c55_isr: d=00003f2a r=00003ee8 s=00003f00 m=00002108
Jan 1 01:01:12 fritz user.warn kernel: [pcmlink]c55: simple checksum: 18DF39B
Jan 1 01:01:13 fritz authpriv.info dropbear[2132]: Running in background
Jan 1 01:01:26 fritz daemon.debug CCcam: ======================================================================
Jan 1 01:01:26 fritz daemon.debug CCcam: starting CCcam 2.1.1 compiled on May 2 2009@20:00:30
Jan 1 01:01:26 fritz daemon.debug CCcam: ======================================================================
Jan 1 01:01:26 fritz daemon.debug CCcam: online using nodeId a8d6dbf26eacb42c
Jan 1 01:01:26 fritz daemon.debug CCcam: DM7025 detected
Jan 1 01:01:26 fritz daemon.debug CCcam: create 8 cam device(s)
Jan 1 01:01:26 fritz daemon.debug CCcam: added 0 keys from /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
Jan 1 01:01:26 fritz daemon.debug CCcam: added 0 keys from /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
Jan 1 01:01:26 fritz daemon.debug CCcam: static cw not found or bad
Jan 1 01:01:26 fritz daemon.debug CCcam: parsed 0 entries from /var/media/ftp/uStor01/cs/cccam/CCcam.prio
Jan 1 01:01:26 fritz daemon.debug CCcam: added 735 provider names from /var/media/ftp/uStor01/cs/cccam/CCcam.providers
Jan 1 01:01:28 fritz user.err telefon[1809]: SIGCHILD killdectpid
Jan 1 01:01:34 fritz daemon.debug CCcam: added 9677 channel names from /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
Jan 1 01:01:34 fritz daemon.debug CCcam: server started on port 25040
Jan 1 01:01:35 fritz daemon.info chronyd[2671]: chronyd version 1.23 starting
Jan 1 01:01:35 fritz daemon.debug CCcam: keyfile changed. Updating...
Jan 1 01:01:35 fritz daemon.debug CCcam: added 0 keys from /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
Jan 1 01:01:35 fritz daemon.debug CCcam: configfile changed. Updating...
Jan 1 01:01:35 fritz daemon.debug CCcam: providerslist changed. Updating...
Jan 1 01:01:35 fritz daemon.debug CCcam: added 735 provider names from /var/media/ftp/uStor01/cs/cccam/CCcam.providers
Jan 1 01:01:35 fritz daemon.debug CCcam: Channel info list changed. Updating...
Jan 1 01:01:37 fritz daemon.debug CCcam: new tcp client from 192.168.178.5
Jan 1 01:01:37 fritz daemon.debug CCcam: user wohnzimmer login attempt from 192.168.178.5
Jan 1 01:01:37 fritz daemon.debug CCcam: client wohnzimmer@93b4aa701614305, running CCcam 2.0.11
Jan 1 01:01:37 fritz daemon.debug CCcam: 0 cards --> client 192.168.178.5(wohnzimmer) (took 0.0016 seconds)
Jan 1 01:01:43 fritz daemon.debug CCcam: added 9677 channel names from /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
Jan 1 01:01:43 fritz daemon.debug CCcam: autoroll keyfile changed. Updating...
Jan 1 01:01:43 fritz daemon.debug CCcam: added 0 keys from /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
Jan 1 01:01:45 fritz daemon.info chronyd[2671]: Initial txc.tick=10000 txc.freq=0 (0.00000000) txc.offset=0 => hz=100 shift_hz=7
Jan 1 01:01:45 fritz daemon.info chronyd[2671]: set_config_hz=0 hz=100 shift_hz=7 basic_freq_scale=1.28000000 nominal_tick=10000 slew_delta_tick=833 max_tick_bias=1000
Jan 1 01:01:45 fritz daemon.info chronyd[2671]: Linux kernel major=2 minor=6 patch=19
Jan 1 01:01:45 fritz daemon.info chronyd[2671]: calculated_freq_scale=0.99902439 freq_scale=0.99902439
Jan 1 01:01:46 fritz daemon.info chronyd[2671]: System's initial offset : 354008394.219815 seconds slow of true (step)
Mar 21 08:41:40 fritz daemon.info chronyd[2671]: Old system time Sat Jan 1 01:01:46 2000 (apply_step_offset)
Mar 21 08:41:40 fritz daemon.info chronyd[2671]: New system time Mon Mar 21 08:41:40 2011
Mar 21 08:41:40 fritz daemon.err chronyd[2671]: Could not start measurement : Invalid argument
Mar 21 08:41:40 fritz user.err telefon[1809]: set initial telefon time from linux time to 8:41 21.03 2011!
Mar 21 08:41:41 fritz daemon.warn chronyd[2671]: Could not send to 85.125.223.111 : Bad file descriptor
Mar 21 08:41:41 fritz daemon.warn chronyd[2671]: Could not send to 93.84.115.3 : Bad file descriptor
Mar 21 08:41:42 fritz daemon.warn chronyd[2671]: Could not send to 85.125.223.111 : Bad file descriptor
Mar 21 08:41:42 fritz daemon.warn chronyd[2671]: Could not send to 93.84.115.3 : Bad file descriptor
Mar 21 08:41:43 fritz daemon.warn chronyd[2671]: Could not send to 85.125.223.111 : Bad file descriptor
Mar 21 08:41:43 fritz daemon.warn chronyd[2671]: Could not send to 93.84.115.3 : Bad file descriptor
Mar 21 10:41:22 fritz daemon.info chronyd[2671]: Selected source 178.26.105.100
Mar 21 10:41:22 fritz daemon.warn chronyd[2671]: System clock wrong by -8.874578 seconds, adjustment started

 

[glory-1]

AW: CS bin am Hängen

einstellung geändert unter kernel auf normal, dann das ......

Spoiler

Mar 21 14:09:29 fritz syslog.info syslogd started: BusyBox v1.18.1
Mar 21 14:09:29 fritz user.notice kernel: klogd started: BusyBox v1.18.1 (2011-01-12 16:53:28 CET)
Mar 21 14:09:29 fritz user.notice kernel: Linux version 2.6.19.2 (3860) (gcc version 3.4.6) #3 Tue Sep 7 16:08:51 CEST 2010
Mar 21 14:09:29 fritz user.warn kernel: cpu-probe: Manufacturer MIPS
Mar 21 14:09:29 fritz user.warn kernel: mips-config1: JTAG pressent
Mar 21 14:09:29 fritz user.warn kernel: mips-config1: TLB size 16
Mar 21 14:09:29 fritz user.warn kernel: mips-config3: Vectored interrupts implmented
Mar 21 14:09:29 fritz user.warn kernel: CPU revision is: 00019068
Mar 21 14:09:29 fritz user.err kernel: [mips_clock] default 360000000 MHz
Mar 21 14:09:29 fritz user.warn kernel: [ur8_clk_set_emif] SDRAM Refresh 0x3a8 Timing 0x2214717 Bank 0x21 Async 0xc42c301
Mar 21 14:09:29 fritz user.err kernel: [ur8_pci_init]
Mar 21 14:09:29 fritz user.err kernel: [pci] default: 33 MHz
Mar 21 14:09:29 fritz user.err kernel: [setup_pci_master]
Mar 21 14:09:29 fritz user.err kernel: [setup_pci_slave]
Mar 21 14:09:29 fritz user.err kernel: Exposing 67108864 memory over PCI
Mar 21 14:09:29 fritz user.err kernel: Setup Complete, Enabling PCI Interface
Mar 21 14:09:29 fritz user.err kernel: PCI Interface Running
Mar 21 14:09:29 fritz user.err kernel: PCI controller initialized
Mar 21 14:09:29 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_nwss_dma level 2 escalator disabled (count 255, floor 7)
Mar 21 14:09:29 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_sar_pdsp level 2 escalator disabled (count 255, floor 7)
Mar 21 14:09:29 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_buffer_manager level 2 escalator disabled (count 255, floor 7)
Mar 21 14:09:29 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_usb level 5 escalator disabled (count 255, floor 7)
Mar 21 14:09:29 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_vlynq level 7 escalator disabled (count 255, floor 7)
Mar 21 14:09:29 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_pci level 5 escalator disabled (count 255, floor 7)
Mar 21 14:09:29 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_c55 level 3 escalator disabled (count 255, floor 7)
Mar 21 14:09:29 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_tdm level 0 escalator disabled (count 255, floor 7)
Mar 21 14:09:29 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_mips level 3 escalator disabled (count 255, floor 7)
Mar 21 14:09:29 fritz user.warn kernel: Determined physical RAM map:
Mar 21 14:09:29 fritz user.warn kernel: memory: 03f60000 @ 14000000 (usable)
Mar 21 14:09:29 fritz user.warn kernel: memory: 000a0000 @ 17f60000 (reserved)
Mar 21 14:09:29 fritz user.warn kernel: [init_bootmem]
Mar 21 14:09:29 fritz user.warn kernel: [free_bootmem]
Mar 21 14:09:29 fritz user.warn kernel: [reserve_bootmem]
Mar 21 14:09:29 fritz user.debug kernel: On node 0 totalpages: 98144
Mar 21 14:09:29 fritz user.err kernel: [mem_map-hack]: reduce size from 3145728 524288 Bytes
Mar 21 14:09:29 fritz user.err kernel: [mem_map-hack]: move map base from 0x94378000 to 0x940f8000
Mar 21 14:09:29 fritz user.debug kernel: DMA zone: 766 pages used for memmap
Mar 21 14:09:29 fritz user.debug kernel: DMA zone: 0 pages reserved
Mar 21 14:09:29 fritz user.debug kernel: DMA zone: 97378 pages, LIFO batch:31
Mar 21 14:09:29 fritz user.debug kernel: Normal zone: 0 pages used for memmap
Mar 21 14:09:29 fritz user.err kernel: [request_resource] Kernel code: start 0x14000000 < root->start 0x17f60000
Mar 21 14:09:29 fritz user.err kernel: [request_resource] Kernel data: start 0x14245da0 < root->start 0x17f60000
Mar 21 14:09:29 fritz user.warn kernel: Built 1 zonelists. Total pages: 97378
Mar 21 14:09:29 fritz user.notice kernel: Kernel command line: console=ttyS0,38400n8r
Mar 21 14:09:29 fritz user.warn kernel: Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Mar 21 14:09:29 fritz user.warn kernel: Primary data cache 16kB, 4-way, linesize 16 bytes.
Mar 21 14:09:29 fritz user.info kernel: Synthesized TLB refill handler (20 instructions).
Mar 21 14:09:29 fritz user.info kernel: Synthesized TLB load handler fastpath (32 instructions).
Mar 21 14:09:29 fritz user.info kernel: Synthesized TLB store handler fastpath (32 instructions).
Mar 21 14:09:29 fritz user.info kernel: Synthesized TLB modify handler fastpath (31 instructions).
Mar 21 14:09:29 fritz user.warn kernel: PID hash table entries: 2048 (order: 11, 8192 bytes)
Mar 21 14:09:29 fritz user.warn kernel: CPU frequency 360.00 MHz
Mar 21 14:09:29 fritz user.warn kernel: Using 180.000 MHz high precision timer.
Mar 21 14:09:29 fritz user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 21 14:09:29 fritz user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 21 14:09:29 fritz user.warn kernel: [free_all_bootmem]
Mar 21 14:09:29 fritz user.info kernel: Memory: 60416k/64896k available (2327k kernel code, 4456k reserved, 700k data, 144k init, 0k highmem)
Mar 21 14:09:29 fritz user.debug kernel: Calibrating delay loop... 359.62 BogoMIPS (lpj=1798144)
Mar 21 14:09:29 fritz user.warn kernel: Mount-cache hash table entries: 512
Mar 21 14:09:29 fritz user.warn kernel: Checking for 'wait' instruction... available.
Mar 21 14:09:29 fritz user.info kernel: NET: Registered protocol family 16
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_init]
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_init] flashsize = 0x01000000 Byte 16 MBytes
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_init] mtd[0] = 0x90000000,0x90000000
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_init] mtd[1] = 0x90020000,0x90F80000
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_init] mtd[2] = 0x90000000,0x90020000
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_init] mtd[3] = 0x90F80000,0x90FC0000
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_init] mtd[4] = 0x90FC0000,0x91000000
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_init] mtd[5] = 0x90000000,0x90000000
Mar 21 14:09:29 fritz user.err kernel: pcibios_read_config: accessing present PCI slot : 14, where 0, size 4
Mar 21 14:09:29 fritz user.err kernel: Master and Slave Enabled
Mar 21 14:09:29 fritz user.info kernel: pktsched: using high resolution timer
Mar 21 14:09:29 fritz user.info kernel: NET: Registered protocol family 2
Mar 21 14:09:29 fritz user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Mar 21 14:09:29 fritz user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Mar 21 14:09:29 fritz user.warn kernel: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Mar 21 14:09:29 fritz user.info kernel: TCP: Hash tables configured (established 16384 bind 8192)
Mar 21 14:09:29 fritz user.info kernel: TCP reno registered
Mar 21 14:09:29 fritz user.info kernel: squashfs: version 3.2 (2007/01/02) Phillip Lougher
Mar 21 14:09:29 fritz user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Mar 21 14:09:29 fritz user.warn kernel: fuse init (API version 7.8)
Mar 21 14:09:29 fritz user.info kernel: io scheduler noop registered (default)
Mar 21 14:09:29 fritz user.info kernel: avm_net_trace: Up and running.
Mar 21 14:09:29 fritz user.warn kernel: [avm] configured: watchdog event debug enable direct gpio
Mar 21 14:09:29 fritz user.warn kernel: AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0, build: Sep 7 2010 16:08:03)
Mar 21 14:09:29 fritz user.info kernel: Serial: 8250/16550 driver $Revision: 1.3 $ 1 ports, IRQ sharing disabled
Mar 21 14:09:29 fritz user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 15) is a UR8_UART
Mar 21 14:09:29 fritz user.err kernel: [cpmac] Version: 1.129 - Revision 790:1110 - Di 7.09.2010 16:08:39
Mar 21 14:09:29 fritz user.err kernel: [dectsync] inactive
Mar 21 14:09:29 fritz user.err kernel: [ar8216] index 0: 00:16:17:25:60:a6
Mar 21 14:09:29 fritz user.warn kernel: Status: entry is valid and has been accessed since the last aging process DES 0x2
Mar 21 14:09:29 fritz user.err kernel: [cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
Mar 21 14:09:29 fritz user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Mar 21 14:09:29 fritz user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Mar 21 14:09:29 fritz user.notice kernel: physmap platform flash device: 01000001 at 10000000
Mar 21 14:09:29 fritz user.info kernel: physmap-flash.1: Found 1 x16 devices at 0x0 in 16-bit bank
Mar 21 14:09:29 fritz user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Mar 21 14:09:29 fritz user.warn kernel: physmap-flash.1: CFI does not contain boot bank location. Assuming top.
Mar 21 14:09:29 fritz user.notice kernel: number of CFI chips: 1
Mar 21 14:09:29 fritz user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Mar 21 14:09:29 fritz user.notice kernel: RedBoot partition parsing not available
Mar 21 14:09:29 fritz user.warn kernel: [ur8_jffs2_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x97e143bc
Mar 21 14:09:29 fritz user.warn kernel: [ur8_jffs2_parser_function] try partition kernel (offset 0x20000 len 16121856)
Mar 21 14:09:29 fritz user.warn kernel: [ur8_jffs2_parser_function] magic 20031985 found @pos 0xe20000, size 1441792
Mar 21 14:09:29 fritz user.warn kernel: [ur8_squashfs_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x97e143bc
Mar 21 14:09:29 fritz user.warn kernel: [ur8_squashfs_parser_function] *p_mtd_pat->name filesystem
Mar 21 14:09:29 fritz user.warn kernel: [ur8_squashfs_parser_function] try partition kernel (offset 0x20000 len 16121856 blocksize=20000)
Mar 21 14:09:29 fritz user.warn kernel: [ur8_squashfs_parser_function] magic found @pos 0x119800
Mar 21 14:09:29 fritz user.notice kernel: 6 find_squashfs partitions found on MTD device physmap-flash.1
Mar 21 14:09:29 fritz user.notice kernel: Creating 6 MTD partitions on "physmap-flash.1":
Mar 21 14:09:29 fritz user.notice kernel: 0x00119800-0x00f80000 : "rootfs"
Mar 21 14:09:29 fritz user.warn kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_add_notifier] name rootfs
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_add_notifier] use rootfs
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_add_notifier] root device: /dev/mtdblock0 (rootfs)
Mar 21 14:09:29 fritz user.notice kernel: 0x00020000-0x00119800 : "kernel"
Mar 21 14:09:29 fritz user.warn kernel: mtd: partition "kernel" doesn't end on an erase block -- force read-only
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_add_notifier] name kernel
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_add_notifier] skip kernel
Mar 21 14:09:29 fritz user.notice kernel: 0x00000000-0x00020000 : "urlader"
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_add_notifier] name urlader
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_add_notifier] skip urlader
Mar 21 14:09:29 fritz user.notice kernel: 0x00f80000-0x00fc0000 : "tffs (1)"
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (1)
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (1)
Mar 21 14:09:29 fritz user.notice kernel: 0x00fc0000-0x01000000 : "tffs (2)"
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (2)
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (2)
Mar 21 14:09:29 fritz user.notice kernel: 0x00e20000-0x00f80000 : "jffs2"
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_add_notifier] name jffs2
Mar 21 14:09:29 fritz user.warn kernel: [ur8_mtd_add_notifier] skip jffs2
Mar 21 14:09:29 fritz user.warn kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
Mar 21 14:09:29 fritz user.err kernel: mtd-ram mtd-ram.2: no memory resource specified
Mar 21 14:09:29 fritz user.err kernel: [ur8_ram_mtd_set_rw] PLATRAM_RO
Mar 21 14:09:29 fritz user.warn kernel: mtd-ram: probe of mtd-ram.2 failed with error -2
Mar 21 14:09:29 fritz user.notice kernel: CAPI Subsystem Rev 1.1.2.8
Mar 21 14:09:29 fritz user.info kernel: TCP cubic registered
Mar 21 14:09:29 fritz user.info kernel: mcfw: IGMPv3 fast forwarding
Mar 21 14:09:29 fritz user.info kernel: NET: Registered protocol family 1
Mar 21 14:09:29 fritz user.info kernel: NET: Registered protocol family 10
Mar 21 14:09:29 fritz user.info kernel: IPv6 over IPv4 tunneling driver
Mar 21 14:09:29 fritz user.info kernel: NET: Registered protocol family 17
Mar 21 14:09:29 fritz user.info kernel: NET: Registered protocol family 8
Mar 21 14:09:29 fritz user.info kernel: NET: Registered protocol family 20
Mar 21 14:09:29 fritz user.err kernel: [4294937503]maxrun: 1
Mar 21 14:09:29 fritz user.warn kernel: MUSB UR8 pdev active!
Mar 21 14:09:29 fritz user.err kernel: PCI_STATUS_SET: 40000
Mar 21 14:09:29 fritz user.err kernel: PCI_STATUS_CLR: 40000
Mar 21 14:09:29 fritz user.err kernel: PCI_HOST_INT_EN: 0
Mar 21 14:09:29 fritz user.err kernel: PCI_HOST_INT_CLR: 0
Mar 21 14:09:29 fritz user.err kernel: PCI_BE_INT_En: 0
Mar 21 14:09:29 fritz user.err kernel: PCI_BE_INT_CLR: 0
Mar 21 14:09:29 fritz user.err kernel: [pci_int_init] done
Mar 21 14:09:29 fritz user.err kernel: [TFFS_Init] 1: mtd_number: 3 | mtd_number2: 4
Mar 21 14:09:29 fritz user.info kernel: Time: MIPS clocksource has been installed.
Mar 21 14:09:29 fritz user.err kernel: [get_mtd_device_wrapped] 1: 3
Mar 21 14:09:29 fritz user.err kernel: [get_mtd_device_wrapped] 2
Mar 21 14:09:29 fritz user.err kernel: [TFFS_Init] 3
Mar 21 14:09:29 fritz user.err kernel: [TFFS_Init] 4.0
Mar 21 14:09:29 fritz user.err kernel: [put_mtd_device_wrapped] 1
Mar 21 14:09:29 fritz user.err kernel: [put_mtd_device_wrapped] 2
Mar 21 14:09:29 fritz user.err kernel: [put_mtd_device_wrapped] 3
Mar 21 14:09:29 fritz user.err kernel: [get_mtd_device_wrapped] 1: 4
Mar 21 14:09:29 fritz user.err kernel: [get_mtd_device_wrapped] 2
Mar 21 14:09:29 fritz user.err kernel: [TFFS_Init] 5
Mar 21 14:09:29 fritz user.err kernel: [TFFS_Init] 6
Mar 21 14:09:29 fritz user.err kernel: [TFFS_Init] 7
Mar 21 14:09:29 fritz user.err kernel: [TFFS_Init] 8
Mar 21 14:09:29 fritz user.err kernel: [TFFS_Init] 9
Mar 21 14:09:29 fritz user.warn kernel: TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
Mar 21 14:09:29 fritz user.warn kernel: mount on mtd3 and mtd4 (double buffering)
Mar 21 14:09:29 fritz user.info kernel: Adam2 environment variables API installed.
Mar 21 14:09:29 fritz user.info kernel: [avm_new] push_button_gpio=25 value=0 enabled
Mar 21 14:09:29 fritz user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Mar 21 14:09:29 fritz user.warn kernel: Freeing prom memory: 0kb freed
Mar 21 14:09:29 fritz user.info kernel: Freeing unused kernel memory: 144k freed
Mar 21 14:09:29 fritz user.warn kernel: AVM_WATCHDOG: System Init UEberwachung 240 Sekunden
Mar 21 14:09:29 fritz user.warn kernel: TFFS Name Table G
Mar 21 14:09:29 fritz user.warn kernel: led_modul_Fritz_Box_7240: module license '
Mar 21 14:09:29 fritz user.warn kernel: (C) Copyright 2008 by AVM
Mar 21 14:09:29 fritz user.warn kernel: ' taintskernel.
Mar 21 14:09:29 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 1 name power
Mar 21 14:09:29 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 9 name internet
Mar 21 14:09:29 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 27 name dect
Mar 21 14:09:29 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 28 name wlan
Mar 21 14:09:29 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 17 name dual1
Mar 21 14:09:29 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 35 name dual2
Mar 21 14:09:29 fritz user.err kernel: [BUTTON] no buttons defined - disable new button controls
Mar 21 14:09:29 fritz user.warn kernel: [piglet]use gpio-settings for 144
Mar 21 14:09:29 fritz user.info kernel: [avm_new]push_button_ctrl: gpio=23 value=0 enabled
Mar 21 14:09:29 fritz user.info kernel: [avm_new]push_button_ctrl:'Taster_4': enable=2 gpio=23 regaddr=00000000 button_type=0
Mar 21 14:09:29 fritz user.warn kernel: patch_dectfw: c008d000, totallen = 46765(b6ad)
Mar 21 14:09:29 fritz user.warn kernel: patch_dectfw: patch_adress: f0ff8 max_len: 26 with Version 2 Len: 17
Mar 21 14:09:29 fritz user.warn kernel: dect_loader: fast-bootmode
Mar 21 14:09:29 fritz user.warn kernel: *
Mar 21 14:09:29 fritz user.warn kernel: *******************************************************************************************
Mar 21 14:09:29 fritz user.warn kernel: dect144xx_file_process: upload of '/lib/modules/dectfw_secondlevel_488.hex' successfull
Mar 21 14:09:29 fritz user.err kernel: [piglet]bitfile for autodetect '/lib/modules/bitfile_isdn.bit'
Mar 21 14:09:29 fritz user.warn kernel: [piglet] clock from pll3(384000000)
Mar 21 14:09:29 fritz user.err kernel: [4294938544]maxrun: 2
Mar 21 14:09:29 fritz user.err kernel: [piglet] Read 72743 bytes total from file
Mar 21 14:09:29 fritz user.warn kernel: [piglet]TDM: FS: 8000 Hz CLK:2047995 Hz
Mar 21 14:09:29 fritz user.err kernel: [piglet] Read 72743 bytes total from file
Mar 21 14:09:29 fritz user.warn kernel: [piglet]TDM: FS: 8000 Hz CLK:2048010 Hz
Mar 21 14:09:29 fritz user.err kernel: [piglet]-> POTS-Mode
Mar 21 14:09:29 fritz user.info kernel: JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Mar 21 14:09:29 fritz user.info kernel: loop: loaded (max 8 devices)
Mar 21 14:09:29 fritz user.warn kernel: [avm_debug]redirect kernel-messages (/dev/debug)
Mar 21 14:09:29 fritz user.warn kernel: [pcmlink]c55_isr: d=00003f2a r=00003ee8 s=00003f00 m=00002108
Mar 21 14:09:29 fritz user.warn kernel: [pcmlink]c55: simple checksum: 18DF384
Mar 21 14:09:29 fritz daemon.warn chronyd[1980]: Could not send to 79.142.192.4 : Bad file descriptor
Mar 21 14:09:29 fritz daemon.warn chronyd[1980]: Could not send to 87.108.20.70 : Invalid argument
Mar 21 14:09:30 fritz daemon.warn chronyd[1980]: Could not send to 79.142.192.4 : Invalid argument
Mar 21 14:09:30 fritz authpriv.info dropbear[2199]: Running in background
Mar 21 14:09:30 fritz daemon.warn chronyd[1980]: Could not send to 87.108.20.70 : Invalid argument
Mar 21 14:09:43 fritz daemon.debug CCcam: ======================================================================
Mar 21 14:09:43 fritz daemon.debug CCcam: starting CCcam 2.1.1 compiled on May 2 2009@20:00:30
Mar 21 14:09:43 fritz daemon.debug CCcam: ======================================================================
Mar 21 14:09:43 fritz daemon.debug CCcam: online using nodeId 630ea25c3e1dfc1f
Mar 21 14:09:43 fritz daemon.debug CCcam: DM7025 detected
Mar 21 14:09:43 fritz daemon.debug CCcam: create 8 cam device(s)
Mar 21 14:09:43 fritz user.err telefon[1808]: SIGCHILD killdectpid
Mar 21 14:09:43 fritz daemon.debug CCcam: added 0 keys from /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
Mar 21 14:09:43 fritz daemon.debug CCcam: added 0 keys from /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
Mar 21 14:09:43 fritz daemon.debug CCcam: static cw not found or bad
Mar 21 14:09:43 fritz daemon.debug CCcam: parsed 0 entries from /var/media/ftp/uStor01/cs/cccam/CCcam.prio
Mar 21 14:09:43 fritz daemon.debug CCcam: added 735 provider names from /var/media/ftp/uStor01/cs/cccam/CCcam.providers
Mar 21 14:09:51 fritz daemon.debug CCcam: added 9677 channel names from /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
Mar 21 14:09:51 fritz daemon.debug CCcam: server started on port 25040
Mar 21 14:09:54 fritz daemon.debug CCcam: new tcp client from 192.168.178.5
Mar 21 14:09:54 fritz daemon.debug CCcam: user wohnzimmer login attempt from 192.168.178.5
Mar 21 14:09:54 fritz daemon.debug CCcam: client wohnzimmer@93b4aa701614305, running CCcam 2.0.11
Mar 21 14:09:54 fritz daemon.debug CCcam: 0 cards --> client 192.168.178.5(wohnzimmer) (took 0.0016 seconds)

 

[ODB82]

AW: CS bin am Hängen

steht doch da:
"Mar 21 14:09:54 fritz daemon.debug CCcam: 0 cards --> client 192.168.178.5(wohnzimmer) (took 0.0016 seconds)"

Karte nicht erkannt, der Rest scheint ja zu funzen ... evtl Easymouse2 mal probieren?

grüße

 

[glory-1]

AW: CS bin am Hängen

so besser ???

Spoiler

Jan 1 01:01:13 fritz syslog.info syslogd started: BusyBox v1.18.1
Jan 1 01:01:13 fritz user.notice kernel: klogd started: BusyBox v1.18.1 (2011-01-12 16:53:28 CET)
Jan 1 01:01:13 fritz user.notice kernel: Linux version 2.6.19.2 (3860) (gcc version 3.4.6) #3 Tue Sep 7 16:08:51 CEST 2010
Jan 1 01:01:13 fritz user.warn kernel: cpu-probe: Manufacturer MIPS
Jan 1 01:01:13 fritz user.warn kernel: mips-config1: JTAG pressent
Jan 1 01:01:13 fritz user.warn kernel: mips-config1: TLB size 16
Jan 1 01:01:13 fritz user.warn kernel: mips-config3: Vectored interrupts implmented
Jan 1 01:01:13 fritz user.warn kernel: CPU revision is: 00019068
Jan 1 01:01:13 fritz user.err kernel: [mips_clock] default 360000000 MHz
Jan 1 01:01:13 fritz user.warn kernel: [ur8_clk_set_emif] SDRAM Refresh 0x3a8 Timing 0x2214717 Bank 0x21 Async 0xc42c301
Jan 1 01:01:13 fritz user.err kernel: [ur8_pci_init]
Jan 1 01:01:13 fritz user.err kernel: [pci] default: 33 MHz
Jan 1 01:01:13 fritz user.err kernel: [setup_pci_master]
Jan 1 01:01:13 fritz user.err kernel: [setup_pci_slave]
Jan 1 01:01:13 fritz user.err kernel: Exposing 67108864 memory over PCI
Jan 1 01:01:13 fritz user.err kernel: Setup Complete, Enabling PCI Interface
Jan 1 01:01:13 fritz user.err kernel: PCI Interface Running
Jan 1 01:01:13 fritz user.err kernel: PCI controller initialized
Jan 1 01:01:13 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_nwss_dma level 2 escalator disabled (count 255, floor 7)
Jan 1 01:01:13 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_sar_pdsp level 2 escalator disabled (count 255, floor 7)
Jan 1 01:01:13 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_buffer_manager level 2 escalator disabled (count 255, floor 7)
Jan 1 01:01:13 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_usb level 5 escalator disabled (count 255, floor 7)
Jan 1 01:01:13 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_vlynq level 7 escalator disabled (count 255, floor 7)
Jan 1 01:01:13 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_pci level 5 escalator disabled (count 255, floor 7)
Jan 1 01:01:13 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_c55 level 3 escalator disabled (count 255, floor 7)
Jan 1 01:01:13 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_tdm level 0 escalator disabled (count 255, floor 7)
Jan 1 01:01:13 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_mips level 3 escalator disabled (count 255, floor 7)
Jan 1 01:01:13 fritz user.warn kernel: Determined physical RAM map:
Jan 1 01:01:13 fritz user.warn kernel: memory: 03f60000 @ 14000000 (usable)
Jan 1 01:01:13 fritz user.warn kernel: memory: 000a0000 @ 17f60000 (reserved)
Jan 1 01:01:13 fritz user.warn kernel: [init_bootmem]
Jan 1 01:01:13 fritz user.warn kernel: [free_bootmem]
Jan 1 01:01:13 fritz user.warn kernel: [reserve_bootmem]
Jan 1 01:01:13 fritz user.debug kernel: On node 0 totalpages: 98144
Jan 1 01:01:13 fritz user.err kernel: [mem_map-hack]: reduce size from 3145728 524288 Bytes
Jan 1 01:01:13 fritz user.err kernel: [mem_map-hack]: move map base from 0x94378000 to 0x940f8000
Jan 1 01:01:13 fritz user.debug kernel: DMA zone: 766 pages used for memmap
Jan 1 01:01:13 fritz user.debug kernel: DMA zone: 0 pages reserved
Jan 1 01:01:13 fritz user.debug kernel: DMA zone: 97378 pages, LIFO batch:31
Jan 1 01:01:13 fritz user.debug kernel: Normal zone: 0 pages used for memmap
Jan 1 01:01:13 fritz user.err kernel: [request_resource] Kernel code: start 0x14000000 < root->start 0x17f60000
Jan 1 01:01:13 fritz user.err kernel: [request_resource] Kernel data: start 0x14245da0 < root->start 0x17f60000
Jan 1 01:01:13 fritz user.warn kernel: Built 1 zonelists. Total pages: 97378
Jan 1 01:01:13 fritz user.notice kernel: Kernel command line: console=ttyS0,38400n8r
Jan 1 01:01:13 fritz user.warn kernel: Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Jan 1 01:01:13 fritz user.warn kernel: Primary data cache 16kB, 4-way, linesize 16 bytes.
Jan 1 01:01:13 fritz user.info kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 01:01:13 fritz user.info kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 01:01:13 fritz user.info kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 01:01:13 fritz user.info kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 01:01:13 fritz user.warn kernel: PID hash table entries: 2048 (order: 11, 8192 bytes)
Jan 1 01:01:13 fritz user.warn kernel: CPU frequency 360.00 MHz
Jan 1 01:01:13 fritz user.warn kernel: Using 180.000 MHz high precision timer.
Jan 1 01:01:13 fritz user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 01:01:13 fritz user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 01:01:13 fritz user.warn kernel: [free_all_bootmem]
Jan 1 01:01:13 fritz user.info kernel: Memory: 60416k/64896k available (2327k kernel code, 4456k reserved, 700k data, 144k init, 0k highmem)
Jan 1 01:01:13 fritz user.debug kernel: Calibrating delay loop... 359.62 BogoMIPS (lpj=1798144)
Jan 1 01:01:13 fritz user.warn kernel: Mount-cache hash table entries: 512
Jan 1 01:01:13 fritz user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 01:01:13 fritz user.info kernel: NET: Registered protocol family 16
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_init]
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_init] flashsize = 0x01000000 Byte 16 MBytes
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_init] mtd[0] = 0x90000000,0x90000000
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_init] mtd[1] = 0x90020000,0x90F80000
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_init] mtd[2] = 0x90000000,0x90020000
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_init] mtd[3] = 0x90F80000,0x90FC0000
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_init] mtd[4] = 0x90FC0000,0x91000000
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_init] mtd[5] = 0x90000000,0x90000000
Jan 1 01:01:13 fritz user.err kernel: pcibios_read_config: accessing present PCI slot : 14, where 0, size 4
Jan 1 01:01:13 fritz user.err kernel: Master and Slave Enabled
Jan 1 01:01:13 fritz user.info kernel: pktsched: using high resolution timer
Jan 1 01:01:13 fritz user.info kernel: NET: Registered protocol family 2
Jan 1 01:01:13 fritz user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 01:01:13 fritz user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 01:01:13 fritz user.warn kernel: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 01:01:13 fritz user.info kernel: TCP: Hash tables configured (established 16384 bind 8192)
Jan 1 01:01:13 fritz user.info kernel: TCP reno registered
Jan 1 01:01:13 fritz user.info kernel: squashfs: version 3.2 (2007/01/02) Phillip Lougher
Jan 1 01:01:13 fritz user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan 1 01:01:13 fritz user.warn kernel: fuse init (API version 7.8)
Jan 1 01:01:13 fritz user.info kernel: io scheduler noop registered (default)
Jan 1 01:01:13 fritz user.info kernel: avm_net_trace: Up and running.
Jan 1 01:01:13 fritz user.warn kernel: [avm] configured: watchdog event debug enable direct gpio
Jan 1 01:01:13 fritz user.warn kernel: AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0, build: Sep 7 2010 16:08:03)
Jan 1 01:01:13 fritz user.info kernel: Serial: 8250/16550 driver $Revision: 1.3 $ 1 ports, IRQ sharing disabled
Jan 1 01:01:13 fritz user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 15) is a UR8_UART
Jan 1 01:01:13 fritz user.err kernel: [cpmac] Version: 1.129 - Revision 790:1110 - Di 7.09.2010 16:08:39
Jan 1 01:01:13 fritz user.err kernel: [dectsync] inactive
Jan 1 01:01:13 fritz user.err kernel: [cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
Jan 1 01:01:13 fritz user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan 1 01:01:13 fritz user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan 1 01:01:13 fritz user.notice kernel: physmap platform flash device: 01000001 at 10000000
Jan 1 01:01:13 fritz user.info kernel: physmap-flash.1: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 01:01:13 fritz user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 01:01:13 fritz user.warn kernel: physmap-flash.1: CFI does not contain boot bank location. Assuming top.
Jan 1 01:01:13 fritz user.notice kernel: number of CFI chips: 1
Jan 1 01:01:13 fritz user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 01:01:13 fritz user.notice kernel: RedBoot partition parsing not available
Jan 1 01:01:13 fritz user.warn kernel: [ur8_jffs2_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x97e143bc
Jan 1 01:01:13 fritz user.warn kernel: [ur8_jffs2_parser_function] try partition kernel (offset 0x20000 len 16121856)
Jan 1 01:01:13 fritz user.warn kernel: [ur8_jffs2_parser_function] magic 20031985 found @pos 0xe20000, size 1441792
Jan 1 01:01:13 fritz user.warn kernel: [ur8_squashfs_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x97e143bc
Jan 1 01:01:13 fritz user.warn kernel: [ur8_squashfs_parser_function] *p_mtd_pat->name filesystem
Jan 1 01:01:13 fritz user.warn kernel: [ur8_squashfs_parser_function] try partition kernel (offset 0x20000 len 16121856 blocksize=20000)
Jan 1 01:01:13 fritz user.warn kernel: [ur8_squashfs_parser_function] magic found @pos 0x119800
Jan 1 01:01:13 fritz user.notice kernel: 6 find_squashfs partitions found on MTD device physmap-flash.1
Jan 1 01:01:13 fritz user.notice kernel: Creating 6 MTD partitions on "physmap-flash.1":
Jan 1 01:01:13 fritz user.notice kernel: 0x00119800-0x00f80000 : "rootfs"
Jan 1 01:01:13 fritz user.warn kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_add_notifier] name rootfs
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_add_notifier] use rootfs
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_add_notifier] root device: /dev/mtdblock0 (rootfs)
Jan 1 01:01:13 fritz user.notice kernel: 0x00020000-0x00119800 : "kernel"
Jan 1 01:01:13 fritz user.warn kernel: mtd: partition "kernel" doesn't end on an erase block -- force read-only
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_add_notifier] name kernel
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_add_notifier] skip kernel
Jan 1 01:01:13 fritz user.notice kernel: 0x00000000-0x00020000 : "urlader"
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_add_notifier] name urlader
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_add_notifier] skip urlader
Jan 1 01:01:13 fritz user.notice kernel: 0x00f80000-0x00fc0000 : "tffs (1)"
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (1)
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (1)
Jan 1 01:01:13 fritz user.notice kernel: 0x00fc0000-0x01000000 : "tffs (2)"
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (2)
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (2)
Jan 1 01:01:13 fritz user.notice kernel: 0x00e20000-0x00f80000 : "jffs2"
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_add_notifier] name jffs2
Jan 1 01:01:13 fritz user.warn kernel: [ur8_mtd_add_notifier] skip jffs2
Jan 1 01:01:13 fritz user.warn kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
Jan 1 01:01:13 fritz user.err kernel: mtd-ram mtd-ram.2: no memory resource specified
Jan 1 01:01:13 fritz user.err kernel: [ur8_ram_mtd_set_rw] PLATRAM_RO
Jan 1 01:01:13 fritz user.warn kernel: mtd-ram: probe of mtd-ram.2 failed with error -2
Jan 1 01:01:13 fritz user.notice kernel: CAPI Subsystem Rev 1.1.2.8
Jan 1 01:01:13 fritz user.info kernel: TCP cubic registered
Jan 1 01:01:13 fritz user.info kernel: mcfw: IGMPv3 fast forwarding
Jan 1 01:01:13 fritz user.info kernel: NET: Registered protocol family 1
Jan 1 01:01:13 fritz user.info kernel: NET: Registered protocol family 10
Jan 1 01:01:13 fritz user.info kernel: IPv6 over IPv4 tunneling driver
Jan 1 01:01:13 fritz user.info kernel: NET: Registered protocol family 17
Jan 1 01:01:13 fritz user.info kernel: NET: Registered protocol family 8
Jan 1 01:01:13 fritz user.info kernel: NET: Registered protocol family 20
Jan 1 01:01:13 fritz user.warn kernel: MUSB UR8 pdev active!
Jan 1 01:01:13 fritz user.err kernel: PCI_STATUS_SET: 40000
Jan 1 01:01:13 fritz user.err kernel: PCI_STATUS_CLR: 40000
Jan 1 01:01:13 fritz user.err kernel: PCI_HOST_INT_EN: 0
Jan 1 01:01:13 fritz user.err kernel: PCI_HOST_INT_CLR: 0
Jan 1 01:01:13 fritz user.err kernel: PCI_BE_INT_En: 0
Jan 1 01:01:13 fritz user.err kernel: PCI_BE_INT_CLR: 0
Jan 1 01:01:13 fritz user.err kernel: [4294937506]maxrun: 1
Jan 1 01:01:13 fritz user.err kernel: [pci_int_init] done
Jan 1 01:01:13 fritz user.err kernel: [TFFS_Init] 1: mtd_number: 3 | mtd_number2: 4
Jan 1 01:01:13 fritz user.info kernel: Time: MIPS clocksource has been installed.
Jan 1 01:01:13 fritz user.err kernel: [get_mtd_device_wrapped] 1: 3
Jan 1 01:01:13 fritz user.err kernel: [get_mtd_device_wrapped] 2
Jan 1 01:01:13 fritz user.err kernel: [TFFS_Init] 3
Jan 1 01:01:13 fritz user.err kernel: [TFFS_Init] 4.0
Jan 1 01:01:13 fritz user.err kernel: [put_mtd_device_wrapped] 1
Jan 1 01:01:13 fritz user.err kernel: [put_mtd_device_wrapped] 2
Jan 1 01:01:13 fritz user.err kernel: [put_mtd_device_wrapped] 3
Jan 1 01:01:13 fritz user.err kernel: [get_mtd_device_wrapped] 1: 4
Jan 1 01:01:13 fritz user.err kernel: [get_mtd_device_wrapped] 2
Jan 1 01:01:13 fritz user.err kernel: [TFFS_Init] 5
Jan 1 01:01:13 fritz user.err kernel: [TFFS_Init] 6
Jan 1 01:01:13 fritz user.err kernel: [TFFS_Init] 7
Jan 1 01:01:13 fritz user.err kernel: [TFFS_Init] 8
Jan 1 01:01:13 fritz user.err kernel: [TFFS_Init] 9
Jan 1 01:01:13 fritz user.warn kernel: TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
Jan 1 01:01:13 fritz user.warn kernel: mount on mtd3 and mtd4 (double buffering)
Jan 1 01:01:13 fritz user.info kernel: Adam2 environment variables API installed.
Jan 1 01:01:13 fritz user.info kernel: [avm_new] push_button_gpio=25 value=0 enabled
Jan 1 01:01:13 fritz user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 01:01:13 fritz user.warn kernel: Freeing prom memory: 0kb freed
Jan 1 01:01:13 fritz user.info kernel: Freeing unused kernel memory: 144k freed
Jan 1 01:01:13 fritz user.warn kernel: AVM_WATCHDOG: System Init UEberwachung 240 Sekunden
Jan 1 01:01:13 fritz user.warn kernel: TFFS Name Table G
Jan 1 01:01:13 fritz user.warn kernel: led_modul_Fritz_Box_7240: module license '
Jan 1 01:01:13 fritz user.warn kernel: (C) Copyright 2008 by AVM
Jan 1 01:01:13 fritz user.warn kernel: ' taintskernel.
Jan 1 01:01:13 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 1 name power
Jan 1 01:01:13 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 9 name internet
Jan 1 01:01:13 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 27 name dect
Jan 1 01:01:13 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 28 name wlan
Jan 1 01:01:13 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 17 name dual1
Jan 1 01:01:13 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 35 name dual2
Jan 1 01:01:13 fritz user.err kernel: [BUTTON] no buttons defined - disable new button controls
Jan 1 01:01:13 fritz user.warn kernel: [piglet]use gpio-settings for 144
Jan 1 01:01:13 fritz user.info kernel: [avm_new]push_button_ctrl: gpio=23 value=0 enabled
Jan 1 01:01:13 fritz user.info kernel: [avm_new]push_button_ctrl:'Taster_4': enable=2 gpio=23 regaddr=00000000 button_type=0
Jan 1 01:01:13 fritz user.warn kernel: patch_dectfw: c008d000, totallen = 46765(b6ad)
Jan 1 01:01:13 fritz user.warn kernel: patch_dectfw: patch_adress: f0ff8 max_len: 26 with Version 2 Len: 17
Jan 1 01:01:13 fritz user.warn kernel: dect_loader: fast-bootmode
Jan 1 01:01:13 fritz user.warn kernel: *
Jan 1 01:01:13 fritz user.warn kernel: *******************************************************************************************
Jan 1 01:01:13 fritz user.warn kernel: dect144xx_file_process: upload of '/lib/modules/dectfw_secondlevel_488.hex' successfull
Jan 1 01:01:13 fritz user.err kernel: [piglet]bitfile for autodetect '/lib/modules/bitfile_isdn.bit'
Jan 1 01:01:13 fritz user.warn kernel: [piglet] clock from pll3(384000000)
Jan 1 01:01:13 fritz user.err kernel: [4294938543]maxrun: 2
Jan 1 01:01:13 fritz user.err kernel: [piglet] Read 72743 bytes total from file
Jan 1 01:01:13 fritz user.warn kernel: [piglet]TDM: FS: 8000 Hz CLK:2047995 Hz
Jan 1 01:01:13 fritz user.err kernel: [piglet] Read 72743 bytes total from file
Jan 1 01:01:13 fritz user.warn kernel: [piglet]TDM: FS: 8000 Hz CLK:2048010 Hz
Jan 1 01:01:13 fritz user.err kernel: [piglet]-> POTS-Mode
Jan 1 01:01:13 fritz user.info kernel: JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Jan 1 01:01:13 fritz user.info kernel: loop: loaded (max 8 devices)
Jan 1 01:01:13 fritz user.warn kernel: [avm_debug]redirect kernel-messages (/dev/debug)
Jan 1 01:01:13 fritz user.warn kernel: [pcmlink]c55_isr: d=00003f2a r=00003ee8 s=00003f00 m=00002108
Jan 1 01:01:13 fritz user.warn kernel: [pcmlink]c55: simple checksum: 18DF385
Jan 1 01:01:15 fritz authpriv.info dropbear[2199]: Running in background
Jan 1 01:01:20 fritz daemon.info chronyd[1970]: Initial txc.tick=10000 txc.freq=0 (0.00000000) txc.offset=0 => hz=100 shift_hz=7
Jan 1 01:01:20 fritz daemon.info chronyd[1970]: set_config_hz=0 hz=100 shift_hz=7 basic_freq_scale=1.28000000 nominal_tick=10000 slew_delta_tick=833 max_tick_bias=1000
Jan 1 01:01:20 fritz daemon.info chronyd[1970]: Linux kernel major=2 minor=6 patch=19
Jan 1 01:01:20 fritz daemon.info chronyd[1970]: calculated_freq_scale=0.99902439 freq_scale=0.99902439
Jan 1 01:01:21 fritz daemon.info chronyd[1970]: System's initial offset : 354041127.658005 seconds slow of true (step)
Mar 21 17:46:49 fritz daemon.info chronyd[1970]: Old system time Sat Jan 1 01:01:21 2000 (apply_step_offset)
Mar 21 17:46:49 fritz daemon.info chronyd[1970]: New system time Mon Mar 21 17:46:49 2011
Mar 21 17:46:49 fritz daemon.err chronyd[1970]: Could not start measurement : Invalid argument
Mar 21 17:46:49 fritz user.err telefon[1809]: set initial telefon time from linux time to 17:46 21.03 2011!
Mar 21 17:46:50 fritz daemon.warn chronyd[1970]: Could not send to 85.125.223.111 : Bad file descriptor
Mar 21 17:46:50 fritz daemon.warn chronyd[1970]: Could not send to 193.55.167.2 : Bad file descriptor
Mar 21 17:46:51 fritz daemon.warn chronyd[1970]: Could not send to 85.125.223.111 : Bad file descriptor
Mar 21 17:46:51 fritz daemon.warn chronyd[1970]: Could not send to 193.55.167.2 : Bad file descriptor
Mar 21 17:46:52 fritz daemon.warn chronyd[1970]: Could not send to 85.125.223.111 : Bad file descriptor
Mar 21 17:46:52 fritz daemon.warn chronyd[1970]: Could not send to 193.55.167.2 : Bad file descriptor
Mar 21 17:46:54 fritz user.err telefon[1809]: SIGCHILD killdectpid
Mar 21 17:46:55 fritz daemon.debug CCcam: ======================================================================
Mar 21 17:46:55 fritz daemon.debug CCcam: starting CCcam 2.1.1 compiled on May 2 2009@20:00:30
Mar 21 17:46:55 fritz daemon.debug CCcam: ======================================================================
Mar 21 17:46:55 fritz daemon.debug CCcam: online using nodeId 41a14eb7be2e4d40
Mar 21 17:46:55 fritz daemon.debug CCcam: DM7025 detected
Mar 21 17:46:55 fritz daemon.debug CCcam: create 8 cam device(s)
Mar 21 17:46:55 fritz daemon.debug CCcam: card detect fail
Mar 21 17:46:55 fritz daemon.debug CCcam: added 0 keys from /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
Mar 21 17:46:55 fritz daemon.debug CCcam: added 0 keys from /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
Mar 21 17:46:55 fritz daemon.debug CCcam: static cw not found or bad
Mar 21 17:46:55 fritz daemon.debug CCcam: parsed 0 entries from /var/media/ftp/uStor01/cs/cccam/CCcam.prio
Mar 21 17:46:55 fritz daemon.debug CCcam: added 735 provider names from /var/media/ftp/uStor01/cs/cccam/CCcam.providers
Mar 21 17:46:56 fritz daemon.debug CCcam: card detect fail
Mar 21 17:46:58 fritz daemon.debug CCcam: card detect fail
Mar 21 17:46:59 fritz daemon.debug CCcam: card detect fail
Mar 21 17:47:01 fritz daemon.debug CCcam: card detect fail
Mar 21 17:47:03 fritz daemon.debug CCcam: irdeto card found
Mar 21 17:47:03 fritz daemon.debug CCcam: added 9677 channel names from /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
Mar 21 17:47:03 fritz daemon.debug CCcam: server started on port 25040
Mar 21 17:47:06 fritz daemon.debug CCcam: camkey challenge ok
Mar 21 17:47:06 fritz daemon.debug CCcam: card added to broker with caid 1702
Mar 21 17:47:08 fritz daemon.debug CCcam: new tcp client from 192.168.178.5
Mar 21 17:47:08 fritz daemon.debug CCcam: user wohnzimmer login attempt from 192.168.178.5
Mar 21 17:47:08 fritz daemon.debug CCcam: client wohnzimmer@93b4aa701614305, running CCcam 2.0.11
Mar 21 17:47:08 fritz daemon.debug CCcam: 1 cards --> client 192.168.178.5(wohnzimmer) (took 0.0019 seconds)

 

[glory-1]

AW: CS bin am Hängen

boah es läuft danke !!!!
wie beschreibe ich den jetzt meinen diablo wifi ? nen cas 3 hab ich.
und so, das ich hd gucken kann .
hat jemand ne oscam für sat ?
muß ich sonst einstellungen ändern ?

 

[spiceweasel]

AW: CS bin am Hängen

hast du nen haken bei dem ftdi usb treiber drinnen?? ist im freetz bei cccam?

 

[glory-1]

AW: CS bin am Hängen

ja hab ich

 

[spiceweasel]

AW: CS bin am Hängen

was war denn jetzt der fehler??

 

[glory-1]

AW: CS bin am Hängen

weiß nicht genau, evt.Kerneleinstellung
hab die geändert, karte raus und rein box neu gestartet und ging.


....
und so, das ich hd gucken kann .
hat jemand ne oscam für sat ?
muß ich sonst einstellungen ändern ?
....

 

[szonic]

AW: CS bin am Hängen

Puh, schwere geburt, was?!

Was meinst Du mit "Oscam für Sat"?

Was willst Du machen, was hast Du bereits gemacht?

...und für Danke gibt es hier im DEB nen feinen Button in jedem Beitrag! ;-)

Grüsse
szonic

 

[glory-1]

AW: CS bin am Hängen

hi,
also genau will ich jetzt nen diablo wifi an meinen ci+ schacht anschliessen und den als client nehmen anstatt der dbox2.
damit ich hd gucken kann. dann will ich ein paar freunde und familie mit als client rannehmen

danke