Hallo@all,
ich habe eine Atemio510HD als CS Client mit MGCAMD 1.38 am laufen (Server ist eine DM800se) bis vor kurzem funktionierte Online CS noch problemlos, urplötzlich habe ich ein schwarzes Bild, geändert habe ich nichts.
die C Line stimmt (funktionierte vorher ja auch) am Server wurde auch nichts geändert.
Im Lan funktioniert alles Problemlos, nur online bleibt das Bild schwarz. (andere Boxen wiederum gehen, auch online)
Mg_cfg
Ignore.list
Newcamd.list
(auch wenn ich hier die DNS eingebe, bleibts dunkel)
peer.cfg
Ich hoffe das die Informationen ausreichen
ps. ich habe auch schon darüber nachgedacht, OSCAM als Client zu nutzen (damit soll es wohl weniger probleme geben?!) Jedoch habe ich da 0 Plan, wie ich die LINE einfüge, vielleicht kann mir da jemand helfen, sollte es mit mgcamd nicht mehr funtkionieren
pps. Die Config die ich gepostet habe, funktioniert auf anderen BOXEN!!!
ich habe eine Atemio510HD als CS Client mit MGCAMD 1.38 am laufen (Server ist eine DM800se) bis vor kurzem funktionierte Online CS noch problemlos, urplötzlich habe ich ein schwarzes Bild, geändert habe ich nichts.
die C Line stimmt (funktionierte vorher ja auch) am Server wurde auch nichts geändert.
Im Lan funktioniert alles Problemlos, nur online bleibt das Bild schwarz. (andere Boxen wiederum gehen, auch online)
Mg_cfg
# EMM messages# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 01 } root newcs
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 8080
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E
time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 11 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 01 } root newcs
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 8080
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E
time # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 11 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
######## ORF Austria - FIX test ##########
#
#ignore viaccess providers:
V: { 02 26 10 }
V: { 03 29 40 }
V: { 02 44 00 }
#
#ignore seca providers:
S: { 00 81 }
S: { 33 11 }
S: { 33 17 }
S: { A8 21 }
S: { 00 6A }
S: { 00 6C }
S: { 00 6D }
#
#ignore CAID?s
X: { 06 22 }
X: { 06 24 }
X: { 06 48 }
X: { 09 AF }
X: { 09 C4 }
X: { 09 C7 }
X: { 09 8E }
X: { 0B 00 }
# X: { 17 02 }
X: { 17 22 }
X: { 18 10 }
X: { 18 15 }
# X: { 18 33 }
X: { 18 34 }
X: { 18 37 }
X: { 0D 00 }
X: { 0D 02 }
X: { 0D 03 }
X: { 0D 70 }
X: { 0D 95 }
X: { 0D 96 }
#
#ignore irdeto chids
I: { 00 02 }
I: { 00 09 }
I: { 00 14 }
I: { 00 32 }
I: { 00 33 }
#
#ignore viaccess providers:
V: { 02 26 10 }
V: { 03 29 40 }
V: { 02 44 00 }
#
#ignore seca providers:
S: { 00 81 }
S: { 33 11 }
S: { 33 17 }
S: { A8 21 }
S: { 00 6A }
S: { 00 6C }
S: { 00 6D }
#
#ignore CAID?s
X: { 06 22 }
X: { 06 24 }
X: { 06 48 }
X: { 09 AF }
X: { 09 C4 }
X: { 09 C7 }
X: { 09 8E }
X: { 0B 00 }
# X: { 17 02 }
X: { 17 22 }
X: { 18 10 }
X: { 18 15 }
# X: { 18 33 }
X: { 18 34 }
X: { 18 37 }
X: { 0D 00 }
X: { 0D 02 }
X: { 0D 03 }
X: { 0D 70 }
X: { 0D 95 }
X: { 0D 96 }
#
#ignore irdeto chids
I: { 00 02 }
I: { 00 09 }
I: { 00 14 }
I: { 00 32 }
I: { 00 33 }
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 192.168.1.1 20000 dummy dummy 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server1
CWS_MULTIPLE = 192.168.1.2 20000:20005 dummy dummy 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server2
CWS_INCOMING_PORT = 21000
CWS = 192.168.1.1 20000 dummy dummy 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server1
CWS_MULTIPLE = 192.168.1.2 20000:20005 dummy dummy 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server2
peer.cfg
# sample peer.cfg for gbox client in mgcamd
# syntax the same as in cwshare.cfg,
# you can just copy cwshare.cfg to this file.
# see below for supported tags, others not supported (yet).
# max cards to send ecm too + preffered cards ids (up to 32)
X: { 05 } 1234 ABCD
# max card's distance to use for ecm
I: ( 05 }
# resend after 2 seconds, re-sync (send to all) after 3 seconds
N: { 0 0 0 0 2000 3000 }
# same, but for NDS cards
S: { 0 0 0 0 400 500 }
# my host and password
M: { my.dyndns.com { 1234ABCD }}
# peers, unlimited number, but only up to 32 unique ports to listen
# host, port to listen, remote port, password, levels (ignored)
D: { peer1.dyndns.com { 2471 3471 { ABCD1234 { 9 9 }}}}
D: { peer2.dyndns.com { 2471 3471 { 6789ABCD { 9 9 }}}}
# ignore ids
Y: { 01 02 }
Y: { 02 03 }
# always save ids, caid-id + id
G: { 05023B00 1234 }
G: { 01000065 5678 }
# virtual cards
V: { 01 { 05 00 7C 00 }}
V: { 02 { 18 01 04 01 }}
V: { 02 { 18 01 05 01 }}
V: { 03 { 18 01 40 01 }}
V: { 03 { 18 01 41 01 }}
# syntax the same as in cwshare.cfg,
# you can just copy cwshare.cfg to this file.
# see below for supported tags, others not supported (yet).
# max cards to send ecm too + preffered cards ids (up to 32)
X: { 05 } 1234 ABCD
# max card's distance to use for ecm
I: ( 05 }
# resend after 2 seconds, re-sync (send to all) after 3 seconds
N: { 0 0 0 0 2000 3000 }
# same, but for NDS cards
S: { 0 0 0 0 400 500 }
# my host and password
M: { my.dyndns.com { 1234ABCD }}
# peers, unlimited number, but only up to 32 unique ports to listen
# host, port to listen, remote port, password, levels (ignored)
D: { peer1.dyndns.com { 2471 3471 { ABCD1234 { 9 9 }}}}
D: { peer2.dyndns.com { 2471 3471 { 6789ABCD { 9 9 }}}}
# ignore ids
Y: { 01 02 }
Y: { 02 03 }
# always save ids, caid-id + id
G: { 05023B00 1234 }
G: { 01000065 5678 }
# virtual cards
V: { 01 { 05 00 7C 00 }}
V: { 02 { 18 01 04 01 }}
V: { 02 { 18 01 05 01 }}
V: { 03 { 18 01 40 01 }}
V: { 03 { 18 01 41 01 }}
Ich hoffe das die Informationen ausreichen
ps. ich habe auch schon darüber nachgedacht, OSCAM als Client zu nutzen (damit soll es wohl weniger probleme geben?!) Jedoch habe ich da 0 Plan, wie ich die LINE einfüge, vielleicht kann mir da jemand helfen, sollte es mit mgcamd nicht mehr funtkionieren
pps. Die Config die ich gepostet habe, funktioniert auf anderen BOXEN!!!
