CCcam mit externen Reader betreiben

AW: CCcam mit externen Reader betreiben

Hallo
Ich bin neuling auf dem Gebiets cs. Und ich versuche schon seit einigen Tagen mein cs einzurichten.
Dbox2 als server mit externen Card reader der wie es scheint nicht erkannt wird.
cccam und newcs als cardserver.
Im Anhang meiné cccam config und meine xml datei, die ich aber hier auxs dem board kopiert habe.
#F: user1 pass1 3 0 0 { 0:0:1 } { } { }
F: user2 pass2 3 0 0 { 0:0:1 } { } { }
F: user3 pass3 3 0 0 { 0:0:1 } { } { }
F: user4 pass4 3 0 0 { 0:0:1 } { } { }
F: user5 pass5 3 0 0 { 0:0:1 } { } { }
F: user6 pass6 3 0 0 { 0:0:1 } { } { }
# client dateien
#C: xxxxxxx.dyndns.xxx 12000 user1 pass1
#C: xxxxxxx.dyndns.xxx 12000 user2 pass2
#C: xxxxxxx.dyndns.xxx 12000 user3 pass3
#C: xxxxxxx.dyndns.xxx 12000 user4 pass4
#C: xxxxxxx.dyndns.xxx 12000 user5 pass5
#C: xxxxxxx.dyndns.xxx 12000 user6 pass6
SERVER LISTEN PORT : 12000
INFO LISTEN PORT : 16000
HTML INFO LISTEN PORT : 16001
ZAP OSD TIME : 3
OSD USERNAME : root
OSD PASSWORD : dbox2
SERIAL READER : /dev/tts/0 phoenix
SMARTCARD CLOCK FREQUENCY: /dev/tts/0 6000000
SHOW TIMING : 3
DEBUG : yes
NEWCAMD CONF : yes
DISABLE EMM : yes
EXTRA EMM LEVEL : yes
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID IGNORE FILE : /var/keys/CCcam.ignore
LOG WARNINGS : /tmp/warnings.txt
NEWCAMD STEALTH : yes
SHOW EXTENEDED CLIENT INFO : yes
EMM Blocker : no
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : user
WEBINFO PASSWORD : pass
N: 127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14


<?xml version="1.0"?>
<newCSconfig>
<readers name="Card Readers">
<device>
<name>CardReader</name>
<type>dbox</type>
<node>/dev/tts/0</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
<device>
<name>Multicam</name>
<type>dbox</type>
<node>/dev/tts/1</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>

</readers>
<radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>30</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>console,udp,tcp</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.0.100</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<userfile>/tmp/users.txt</userfile>
<user>
<name>dummy</name>
<password>dummy</password>
<au>on</au>
<allow>lower</allow>
<allow>upper</allow>
</user>
<user>
<name>dream</name>
<password>test10</password>
<spider>on</spider>
<sidoverride>off</sidoverride>
<au>on</au>
</user>
<user>
<name>herbert</name>
<password>koeln</password>
<spider>on</spider>
<sidoverride>off</sidoverride>
<au>off</au>
</user>
<user>
<name>schlafzimmer</name>
<password>test2</password>
<spider>off</spider>
<sidoverride>off</sidoverride>
<au>off</au>
</user>
<user>
<name>kukuk</name>
<password>kukuk</password>
<spider>off</spider>
<sidoverride>off</sidoverride>
<au>off</au>
</user>


</newcamdserver>
</newCSconfig>




Wo steckt der Fehler, oder was mache ich falsch.

Danke im Vorraus

AW: CCcam mit externen Reader betreiben

neo777 schrieb:

Habe das Newcs per Telnet gestartet:

/var/emu # ls
CCcam camd3 mgcamd version.txt
camd2 cs2gbox newcs
/var/emu # ./newcs
This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 11:59:39 ] [ Box detect ] Box type 4 (Dbox2)
[ 11:59:39 ] [ Config ] Option <blockc0> for device 0 (CardReader) not present, defaulting to NO
[ 11:59:39 ] [ Config ] Option <Seca-PPV> for device 0 (CardReader) not present, defaulting to NO
[ 11:59:39 ] [ Config ] /dev/tts/0 ECM priority: round
[ 11:59:39 ] [ Config ] Option <spider> not present for User: root, defaulting to NO
[ 11:59:39 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 11:59:39 ] [ EMM Cache ] Initialising dynamic Cache
[ 11:59:39 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 859
[ 11:59:39 ] [ Loader ] Starting Telnet on port 1001
[ 11:59:39 ] [ Loader ] Started HTTP-server on port: 8088
[ 11:59:39 ] [ Loader ] Reader type 4 on node /dev/tts/0
[ 11:59:39 ] [ Dbox ] Opening device /dev/tts/0
failed to open/dev/rtscts: No such file or directory
rtscts device: Invalid argument
rtscts device: Bad file descriptor

Weiss jemand was da schief läuft?

Zum Vergrößern anklicken....

[ 11:59:39 ] [ Dbox ] Opening device /dev/tts/0
failed to open/dev/rtscts: No such file or directory
rtscts device: Invalid argument
rtscts device: Bad file descriptor

Zum Vergrößern anklicken....

konsole...eingeben

MfG