Folgendes wird vorausgesetzt: Du hast einen funktionierenden CCCamserver z. B. in der Fritzbox.
Was wird benötigt. Eine Oscam, einfach in der Database mal nach suchen. Am besten als Plugin für den GM
Nun sind folgende Dateien im GM im Verzeichnis /var/tuxbox/config zu bearbeiten:
oscam.conf die Datei kann wie folgt übernommen werden und muss nicht mehr angepasst werden.
oscam.server es muss nur das Rot eingefärbte eingetragen werden, der Rest kann 1:1 übernommen werden.
oscam.user auch diese Datei kann soweit falls nicht schon so vorhanden 1:1 übernommen werden
So das war es dann auch schon. Bitte nachdem die Änderung vorgenommen sind, die Box neustarten und unter Plugin kontrollieren ob die oscam gestartet ist. Ich hoffe ich kann hiermit dem einem oder anderem helfen und ggf. viel Zeit ersparen mit rum gefummele.
Was wird benötigt. Eine Oscam, einfach in der Database mal nach suchen. Am besten als Plugin für den GM
Nun sind folgende Dateien im GM im Verzeichnis /var/tuxbox/config zu bearbeiten:
oscam.conf die Datei kann wie folgt übernommen werden und muss nicht mehr angepasst werden.
[global]
nice = -1
WaitForCards = 1
saveinithistory = 1
lb_savepath = /tmp/lb_stat
# logging
logfile = stdout
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw
# Web Interface
[webif]
httpport = 8888
httpuser = alien
httppwd = alien
httprefresh = 0
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254
httphideidleclients = 0
httpreadonly = 0
[dvbapi]
enabled = 1
user = alien
boxtype = dreambox
# priority = 0D05,1702,1830,1833,1801,0963,0B02,0100:003311,093B,0BAA,0D03:000008
nice = -1
WaitForCards = 1
saveinithistory = 1
lb_savepath = /tmp/lb_stat
# logging
logfile = stdout
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw
# Web Interface
[webif]
httpport = 8888
httpuser = alien
httppwd = alien
httprefresh = 0
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254
httphideidleclients = 0
httpreadonly = 0
[dvbapi]
enabled = 1
user = alien
boxtype = dreambox
# priority = 0D05,1702,1830,1833,1801,0963,0B02,0100:003311,093B,0BAA,0D03:000008
oscam.server es muss nur das Rot eingefärbte eingetragen werden, der Rest kann 1:1 übernommen werden.
# this is an example of how to connect a CCcam server
# this line acts as a cccam 2.0.11 client (recomended)
[reader]
label = dreambox1
enable = 1
protocol = cccam
device = xxx.dyndns.org,33000 hier kommt die eure Dyndns oder no Ip Adresse rein, falls ihr nur ein HomeSharing betreibt kommt da die IP des Servers rein. Den Port nicht vergessen.
user = benutzer aus der F line eures CCCam Servers eintragen
password = das Passwort der Users
cccversion = 2.2.1
cccmaxhops = 2
group = 1
#
#[reader]
#label = dreambox2
#enable = 2
#protocol = cccam
#device = xxxxxxx.dyndns.org,20000
#user = xxxxxxx
#password = xxxxxxx
#cccversion = 2.2.1
#cccmaxhops = 2
#group = 1
#
#[reader]
#label = internal_hrt
#enable = 1
#protocol = internal
#device = /dev/sci0
#services =
#caid = 0500
#detect = cd
#mhz = 500
#cardmhz = 500
#ident = xxxxxx:xxxxxxxxxx
#group = 2
#emmcache = 1,3,2
#ecmcache = 1
#lb_weight = 100
#
#[reader]
#Enable = 1
#Label = orf-camd3
#Protocol = camd35
#Device = 127.0.0.1,30001
#Account = test,pass
#CAID = 0D05
#Group = 1
#
# this is an example how to connect to a NewCamd server
#
# [reader]
# label = newcamd_server
# protocol = newcamd
# key = 0102030405060708091011121314
# device = myserver.dyndns.tv,66666
# account = login1,password1
# group = 2
#
# this is an example how to "read" a na*ra card internal(e.g. HD+/HD01)
#
# [reader]
# Label = HD plus
# Protocol = internal
# Device = /dev/sci0
# detect = CD
# EMMCache = 1,1,2
# group = 3
# CAID = 1830
# rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# boxkey = A7642F57BC96D37C
#
# this is an example how to "read" a na*ra card internal(e.g. HD+/HD02)
#########use following entry in oscam.services(required)#######
####[hdplus]
####caid=1843
####srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,5273,5274
#########
#
# [reader]
# Label = HD plus
# Protocol = internal
# device = /dev/sci0
# detect = CD
# EMMCache = 1,3,2
# group = 4
# CAID = 1843
# ident = 1843:003411,000000,008011 #not required#
# rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# boxkey = A7642F57BC96D37C
# cardmhz = 368
# mhz = 368
#
# this is an example how to "read" a nagra card internal(Sky)
#
# [reader]
# Label = Sky-Test
# Protocol = internal
# Device = /dev/sci0
# detect = CD
# mhz = 600
# cardmhz = 600
# EMMCache = 1,1,2
# group = 5
# CAID = 1702
#
# this is an example how to "read" a Viaccess card internal(SRG)
#
# [reader]
# Label = SRG
# Protocol = internal
# device = /dev/sci0
# detect = CD
# EMMCache = 1,3,2
# services = SRG
# group = 6
# CAID = 0500
# mhz = 368
#
# this is an example how to "read" a Funcard with ORF + AS-file internal
# [reader]
# Label = ORF
# Protocol = internal
# device = /dev/sci0
# detect = CD
# EMMCache = 1,3,2
# group = 7
# CAID = 0D05
#
# this is an example how to "read" a BDC internal(C+NL)
#
# [reader]
# label = C+NL
# enable = 1
# protocol = internal
# device = /dev/sci0
# caid = 0622
# force_irdeto = 1
# detect = cd
# mhz = 600
# cardmhz = 600
# group = 8
# emmcache = 1,3,2
# lb_weight = 100
# boxkey = 0000000000000000
#
#######################################################################
## smargo support ##
# External reader (smargo) requires oscam LIBUSB #
# get reader serial of smargo by telnet cat /proc/bus/usb/devices #
# smargo firmware 1.04 or higher required for getting serial #
# #
#######################################################################
#
# this is an example how to "read" ICE in smargo(IR2 caid 0648)##input reader serial###
#
# [reader]
# Label = ICE
# protocol = smartreader
# device = Serial:Reader XXXXX
# detect = CD
# EMMCache = 1,3,2
# group = 9
# force_irdeto = 1
# deprecated = 1
# CAID = 0648
# rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE6708AAF97C985CBA8A6C13826963BD3092EB9FC72F773A430724706AA5E1D14E1747842D32069A12D
# boxkey = 1122334455667788
# boxid = 12345678
# cardmhz = 600
# mhz = 600
#
# this is an example how to "read" ICE in smargo(CW caid 0D95)##input reader serial###
#
# [reader]
# Label = ICE
# protocol = smartreader
# device = Serial:Reader XXXXX
# detect = CD
# EMMCache = 1,3,2
# group = 10
# CAID = 0D95
# mhz = 257
# cardmhz = 257
#
# this is an example how to "read" a na*ra card in smargo(e.g. HD+/HD01)##input reader serial###
#
# [reader]
# Label = HD plus
# protocol = smartreader
# device = Serial:Reader XXXXX
# detect = CD
# EMMCache = 1,3,2
# group = 11
# CAID = 1830
# rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# boxkey = A7642F57BC96D37C
#
# this is an example how to "read" a nds card in smargo(sky V13)##input reader serial at XXXXX###
#
# [reader]
# label = sky_v13
# protocol = smartreader
# device = Serial:Reader XXXXX
# caid = 09C4
# boxid = 12345678
# detect = cd
# mhz = 368
# cardmhz = 368
# ident = 09C4:000000
# group = 12
# emmcache = 1,3,2
# blockemm-g = 1
#
###############################################################################################
# this line acts as a cccam 2.0.11 client (recomended)
[reader]
label = dreambox1
enable = 1
protocol = cccam
device = xxx.dyndns.org,33000 hier kommt die eure Dyndns oder no Ip Adresse rein, falls ihr nur ein HomeSharing betreibt kommt da die IP des Servers rein. Den Port nicht vergessen.
user = benutzer aus der F line eures CCCam Servers eintragen
password = das Passwort der Users
cccversion = 2.2.1
cccmaxhops = 2
group = 1
#
#[reader]
#label = dreambox2
#enable = 2
#protocol = cccam
#device = xxxxxxx.dyndns.org,20000
#user = xxxxxxx
#password = xxxxxxx
#cccversion = 2.2.1
#cccmaxhops = 2
#group = 1
#
#[reader]
#label = internal_hrt
#enable = 1
#protocol = internal
#device = /dev/sci0
#services =
#caid = 0500
#detect = cd
#mhz = 500
#cardmhz = 500
#ident = xxxxxx:xxxxxxxxxx
#group = 2
#emmcache = 1,3,2
#ecmcache = 1
#lb_weight = 100
#
#[reader]
#Enable = 1
#Label = orf-camd3
#Protocol = camd35
#Device = 127.0.0.1,30001
#Account = test,pass
#CAID = 0D05
#Group = 1
#
# this is an example how to connect to a NewCamd server
#
# [reader]
# label = newcamd_server
# protocol = newcamd
# key = 0102030405060708091011121314
# device = myserver.dyndns.tv,66666
# account = login1,password1
# group = 2
#
# this is an example how to "read" a na*ra card internal(e.g. HD+/HD01)
#
# [reader]
# Label = HD plus
# Protocol = internal
# Device = /dev/sci0
# detect = CD
# EMMCache = 1,1,2
# group = 3
# CAID = 1830
# rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# boxkey = A7642F57BC96D37C
#
# this is an example how to "read" a na*ra card internal(e.g. HD+/HD02)
#########use following entry in oscam.services(required)#######
####[hdplus]
####caid=1843
####srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,5273,5274
#########
#
# [reader]
# Label = HD plus
# Protocol = internal
# device = /dev/sci0
# detect = CD
# EMMCache = 1,3,2
# group = 4
# CAID = 1843
# ident = 1843:003411,000000,008011 #not required#
# rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# boxkey = A7642F57BC96D37C
# cardmhz = 368
# mhz = 368
#
# this is an example how to "read" a nagra card internal(Sky)
#
# [reader]
# Label = Sky-Test
# Protocol = internal
# Device = /dev/sci0
# detect = CD
# mhz = 600
# cardmhz = 600
# EMMCache = 1,1,2
# group = 5
# CAID = 1702
#
# this is an example how to "read" a Viaccess card internal(SRG)
#
# [reader]
# Label = SRG
# Protocol = internal
# device = /dev/sci0
# detect = CD
# EMMCache = 1,3,2
# services = SRG
# group = 6
# CAID = 0500
# mhz = 368
#
# this is an example how to "read" a Funcard with ORF + AS-file internal
# [reader]
# Label = ORF
# Protocol = internal
# device = /dev/sci0
# detect = CD
# EMMCache = 1,3,2
# group = 7
# CAID = 0D05
#
# this is an example how to "read" a BDC internal(C+NL)
#
# [reader]
# label = C+NL
# enable = 1
# protocol = internal
# device = /dev/sci0
# caid = 0622
# force_irdeto = 1
# detect = cd
# mhz = 600
# cardmhz = 600
# group = 8
# emmcache = 1,3,2
# lb_weight = 100
# boxkey = 0000000000000000
#
#######################################################################
## smargo support ##
# External reader (smargo) requires oscam LIBUSB #
# get reader serial of smargo by telnet cat /proc/bus/usb/devices #
# smargo firmware 1.04 or higher required for getting serial #
# #
#######################################################################
#
# this is an example how to "read" ICE in smargo(IR2 caid 0648)##input reader serial###
#
# [reader]
# Label = ICE
# protocol = smartreader
# device = Serial:Reader XXXXX
# detect = CD
# EMMCache = 1,3,2
# group = 9
# force_irdeto = 1
# deprecated = 1
# CAID = 0648
# rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE6708AAF97C985CBA8A6C13826963BD3092EB9FC72F773A430724706AA5E1D14E1747842D32069A12D
# boxkey = 1122334455667788
# boxid = 12345678
# cardmhz = 600
# mhz = 600
#
# this is an example how to "read" ICE in smargo(CW caid 0D95)##input reader serial###
#
# [reader]
# Label = ICE
# protocol = smartreader
# device = Serial:Reader XXXXX
# detect = CD
# EMMCache = 1,3,2
# group = 10
# CAID = 0D95
# mhz = 257
# cardmhz = 257
#
# this is an example how to "read" a na*ra card in smargo(e.g. HD+/HD01)##input reader serial###
#
# [reader]
# Label = HD plus
# protocol = smartreader
# device = Serial:Reader XXXXX
# detect = CD
# EMMCache = 1,3,2
# group = 11
# CAID = 1830
# rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# boxkey = A7642F57BC96D37C
#
# this is an example how to "read" a nds card in smargo(sky V13)##input reader serial at XXXXX###
#
# [reader]
# label = sky_v13
# protocol = smartreader
# device = Serial:Reader XXXXX
# caid = 09C4
# boxid = 12345678
# detect = cd
# mhz = 368
# cardmhz = 368
# ident = 09C4:000000
# group = 12
# emmcache = 1,3,2
# blockemm-g = 1
#
###############################################################################################
oscam.user auch diese Datei kann soweit falls nicht schon so vorhanden 1:1 übernommen werden
[account]
user = alien
pwd = enigma
disabled = 0
expdate =
group = 1
hostname =
uniq = 0
sleep = 0
monlevel = 0
services =
caid =
betatunnel = 1833.FFFF:1702,1834.FFFF:1722
ident =
cccmaxhops = 3
keepalive = 1
numusers = 0
penalty = 0
user = alien
pwd = enigma
disabled = 0
expdate =
group = 1
hostname =
uniq = 0
sleep = 0
monlevel = 0
services =
caid =
betatunnel = 1833.FFFF:1702,1834.FFFF:1722
ident =
cccmaxhops = 3
keepalive = 1
numusers = 0
penalty = 0
So das war es dann auch schon. Bitte nachdem die Änderung vorgenommen sind, die Box neustarten und unter Plugin kontrollieren ob die oscam gestartet ist. Ich hoffe ich kann hiermit dem einem oder anderem helfen und ggf. viel Zeit ersparen mit rum gefummele.
Zuletzt bearbeitet:
!!!
