Anfänger braucht Hilfe Oscam

[ultima]

Zuerst würde ich mal eine aktuellere Oscam Version installieren.

 

[And101]

Kannst du mir mal ein nennen, ein link?

 

[MasterBade]

Was hast du in der oscam conf denn jetzt unter serverip eingetragen?

Gesendet von meinem SM-G930F mit Tapatalk

 

[And101]

serverip = 192.168.178.1 eigentlich die von der Fritzbox

 

[MasterBade]

Nimm das mal raus und starte neu. Und versuche dann nochmal das webif zu erreichen

Gesendet von meinem SM-G930F mit Tapatalk

 

[cojo]

an deiner stelle würde ich mal sämtliche configs posten wie sie JETZT sind
also : oscam.conf / oscam.server / oscam.user

Wenn du z.B das NN2 Image hast,da ist eine aktuelle oscam über den feed zu installieren

die oscam dateien legst du dir am besen mit Notepad++ an oder lädst dir die vom NN2 feed runter und bearbeitest diese anschliessen mit Notepad++

 

[And101]

Also ich habe es endlich geschafft das Oscam zumindest läuft und übers webif erreichbar ist die Karte ist aber noch dunkel
Hab des in der alten DM7020HD gemacht versuche es morgen in der DM900. In der Dm7020 wurde die Karte auch für ein paar sekunden hell dann wieder dunkel. War ganz komisch. Mit CCam sofort hell.

Spoiler: Webif log

2017/09/27 06:38:56 00000000 s (main) System name = Linux
2017/09/27 06:38:56 00000000 s (main) Host name = dm7020hd
2017/09/27 06:38:56 00000000 s (main) Release = 3.2-dm7020hd
2017/09/27 06:38:56 00000000 s (main) Version = #1 SMP Sun Jun 21 15:26:04 CEST 2015
2017/09/27 06:38:56 00000000 s (main) Machine = mips
2017/09/27 06:38:56 00000000 s (main) Stb model = dm7020hd
2017/09/27 06:38:56 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 587
2017/09/27 06:38:56 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2017/09/27 06:38:56 00000000 s (main) signal handling initialized
2017/09/27 06:38:56 00000000 s (config) 1 provid's loaded
2017/09/27 06:38:56 00000000 s (config) 1 service-id's loaded in 1 ms
2017/09/27 06:38:56 00000000 s (net) newcamd: initialized (fd=5, port=31125)
2017/09/27 06:38:56 00000000 s (net) -> CAID: 098E PROVID: 000000
2017/09/27 06:38:56 00000000 s (net) cccam: initialized (fd=6, port=12888)
2017/09/27 06:38:56 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/09/27 06:38:56 00000000 s (main) waiting for local card init
2017/09/27 06:38:56 4C932A9A h (webif) webif: decompressed 190248 bytes back into 448248 bytes
2017/09/27 06:38:56 4C932A9A h (webif) HTTP Server running. ip=0.0.0.0 port=16002

Spoiler: Oscam server

[ reader]
label = V23
enable = 1
protocol = internal
device = /dev/sci0
caid = 098E
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2

Spoiler: Oscam Conf

[global]
logfile = /tmp/oscam.log
nice = -1
maxlogsize = 128
preferlocalcards = 1
saveinithistory = 1


[newcamd]
port = 31125@098E:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = Mein Port

[webif]
httpport = 16002
httpuser = admin
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox
extended_cw_api = 2

 

[pete_sat]

etwas mehr vom oscam.log hilft bei der fehlersuche. - datei findest du laut config unter /tmp/oscam.log

 

[cojo]

und wo ist der User ?

 

[And101]

Hier noch mal Log DM7020 + DM900 bei beiden bleibt die Karte dunkel

Spoiler: OSCAM LOg 7020

>> OSCam << cardserver log switched at Wed Sep 27 18:05:09 2017
-------------------------------------------------------------------------------
2017/09/27 18:05:09 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r1500 (mipsel-oe-linux)
2017/09/27 18:05:09 00000000 s (main) System name = Linux
2017/09/27 18:05:09 00000000 s (main) Host name = dm7020hd
2017/09/27 18:05:09 00000000 s (main) Release = 3.2-dm7020hd
2017/09/27 18:05:09 00000000 s (main) Version = #1 SMP Sun Jun 21 15:26:04 CEST 2015
2017/09/27 18:05:09 00000000 s (main) Machine = mips
2017/09/27 18:05:09 00000000 s (main) Stb model = dm7020hd
2017/09/27 18:05:09 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 21915
2017/09/27 18:05:09 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2017/09/27 18:05:09 00000000 s (main) signal handling initialized
2017/09/27 18:05:09 00000000 s (config) 1 provid's loaded
2017/09/27 18:05:09 00000000 s (config) 1 service-id's loaded in 0 ms
2017/09/27 18:05:09 00000000 s (net) newcamd: initialized (fd=8, port=31125)
2017/09/27 18:05:09 00000000 s (net) -> CAID: 098E PROVID: 000000
2017/09/27 18:05:09 00000000 s (net) cccam: initialized (fd=9, port=MEIN PORT)
2017/09/27 18:05:09 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/09/27 18:05:09 00000000 s (main) waiting for local card init
2017/09/27 18:05:09 5685C36A h (webif) webif: decompressed 190248 bytes back into 448248 bytes
2017/09/27 18:05:09 5685C36A h (webif) HTTP Server running. ip=0.0.0.0 port=16002

Spoiler: OSCAM Log 900 SC1

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Wed Sep 27 18:21:41 2017
-------------------------------------------------------------------------------
2017/09/27 18:21:41 00000000 s >> OSCam << cardserver log switched, version newnigma-build-svn1524, build r0 (arm-oe-linux-gnueabi)
2017/09/27 18:21:41 00000000 s (main) System name = Linux
2017/09/27 18:21:41 00000000 s (main) Host name = dm900
2017/09/27 18:21:41 00000000 s (main) Release = 3.14-1.17-dm900
2017/09/27 18:21:41 00000000 s (main) Version = #40 SMP Tue Jul 18 17:12:11 CEST 2017
2017/09/27 18:21:41 00000000 s (main) Machine = armv7l
2017/09/27 18:21:41 00000000 s (main) Stb model = dm900
2017/09/27 18:21:41 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 285
2017/09/27 18:21:41 00000000 s (emu) OSCam-Emu version 739
2017/09/27 18:21:41 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2017/09/27 18:21:41 00000000 s (main) signal handling initialized
2017/09/27 18:21:41 00000000 s (net) newcamd: initialized (fd=6, port=31125)
2017/09/27 18:21:41 00000000 s (net) -> CAID: 098E PROVID: 000000
2017/09/27 18:21:41 00000000 s (net) cccam: initialized (fd=7, port=MEIN PORT)
2017/09/27 18:21:41 00000000 s (reader) emulator [emu] creating thread for device emulator
2017/09/27 18:21:41 00000000 s (main) waiting for local card init
2017/09/27 18:21:41 22FDFA75 r (emu) Key file not found in: /etc/tuxbox/config
2017/09/27 18:21:41 22FDFA75 r (emu) Key file not found in: /var/keys
2017/09/27 18:21:41 22FDFA75 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2017/09/27 18:21:41 52475970 h (webif) webif: decompressed 197129 bytes back into 469640 bytes
2017/09/27 18:21:41 00000000 (emu) INFO: FFDecsa parallel mode = 32
2017/09/27 18:21:41 52475970 h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2017/09/27 18:21:42 22FDFA75 r (reader) emulator [emu] card detected
2017/09/27 18:21:43 22FDFA75 r (reader) emulator [emu] found card system emu
2017/09/27 18:21:43 22FDFA75 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/09/27 18:21:43 22FDFA75 r (emu) Key file not found in: /etc/tuxbox/config
2017/09/27 18:21:43 22FDFA75 r (emu) Key file not found in: /var/keys

Spoiler: OSCAM LOg 900 SC0

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Wed Sep 27 18:29:32 2017
-------------------------------------------------------------------------------
2017/09/27 18:29:32 00000000 s >> OSCam << cardserver log switched, version newnigma-build-svn1524, build r0 (arm-oe-linux-gnueabi)
2017/09/27 18:29:32 00000000 s (main) System name = Linux
2017/09/27 18:29:32 00000000 s (main) Host name = dm900
2017/09/27 18:29:32 00000000 s (main) Release = 3.14-1.17-dm900
2017/09/27 18:29:32 00000000 s (main) Version = #40 SMP Tue Jul 18 17:12:11 CEST 2017
2017/09/27 18:29:32 00000000 s (main) Machine = armv7l
2017/09/27 18:29:32 00000000 s (main) Stb model = dm900
2017/09/27 18:29:32 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 257
2017/09/27 18:29:32 00000000 s (emu) OSCam-Emu version 739
2017/09/27 18:29:32 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2017/09/27 18:29:32 00000000 s (main) signal handling initialized
2017/09/27 18:29:32 00000000 s (net) newcamd: initialized (fd=6, port=31125)
2017/09/27 18:29:32 00000000 s (net) -> CAID: 098E PROVID: 000000
2017/09/27 18:29:32 00000000 s (net) cccam: initialized (fd=7, port=MEIN PORT)
2017/09/27 18:29:32 00000000 s (reader) emulator [emu] creating thread for device emulator
2017/09/27 18:29:32 00000000 s (main) waiting for local card init
2017/09/27 18:29:32 2F2F51CA r (emu) Key file not found in: /etc/tuxbox/config
2017/09/27 18:29:32 2F2F51CA r (emu) Key file not found in: /var/keys
2017/09/27 18:29:32 2F2F51CA r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2017/09/27 18:29:32 00000000 (emu) INFO: FFDecsa parallel mode = 32
2017/09/27 18:29:32 57780858 h (webif) webif: decompressed 197129 bytes back into 469640 bytes
2017/09/27 18:29:32 57780858 h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2017/09/27 18:29:33 2F2F51CA r (reader) emulator [emu] card detected
2017/09/27 18:29:34 2F2F51CA r (reader) emulator [emu] found card system emu
2017/09/27 18:29:34 2F2F51CA r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/09/27 18:29:34 2F2F51CA r (emu) Key file not found in: /etc/tuxbox/config
2017/09/27 18:29:34 2F2F51CA r (emu) Key file not found in: /var/keys

USER

Spoiler: OSAM USER

[account]
user = lokal
au = 1
group = 1

[account]
user=Test
pwd=Test
group=1
cccmaxhops=5
cccreshare=0

Spoiler: conf

[global]
logfile = /tmp/oscam.log
nice = -1
maxlogsize = 128
preferlocalcards = 1
saveinithistory = 1


[newcamd]
port = 31125@098E:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = MEIN PORT

[webif]
httpport = 16002
httpuser = admin
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox
extended_cw_api = 2

Spoiler: Server

[ reader]
label = V23
enable = 1
protocol = internal
device = /dev/sci1
caid = 098E
boxid = 12345678
detect = cd
group = 1
emmcache = 1,1,2

 

[pete_sat]

ohne vollständiges ocam.log ist das ganze relativ sinnlos und reine hellseherei.

es geht gerade um den zeitraum, wo der r-eader startet und danach ein kanal ausgewählt ist, der von der karte bzw. dem r-eader entschlüsselt werden sollte.

 

[filius00]

[ reader]
label = V23

In deiner Server ist vermutlich eine Leerstelle hinter der Eingangsklammer. Dies darf nicht sein! Entfernen, Oscam neu starten und ein Log bis zur Senderanfrage!

 

[And101]

Juhu geschafft es ist hell entweder es lag am Leerzeichen oder MHZ zahl die verändert habe. VIELEN DANK

 

[filius00]

am Leerzeichen oder MHZ zahl

Lässt sich doch leicht feststellen, einfach noch mal einzeln ändern und testen. Wenn hinter der Klammer aber definitiv ein Leerzeichen war kannst du davon ausgehen das dies der Grund war und nicht die Mhz Einstellung.