yaVDR 0.5a SC-Plugin funktioniert nicht... weiß nicht mehr weiter :(

[nws_basti]

Hallo zusammen,

ich habe schon das Forum durchsucht und gegoogled, aber leider finde ich keine passende Antwort, wieso es nicht funktioniert.
Das ganze System ist ein Test-System, wenn alles funktioniert, werde ich mir DVB-S2 Karten kaufen und es noch mal aufspielen.

Vielleicht hat einer von euch eine Idee und kann mir helfen?!

Software:
- yaVDR 0.5a
- SC-Plugin wie hier im Forum beschrieben installiert

Spoiler

sudo add-apt-repository ppa:gandalf-der-grosse/stable-vdr
sudo apt-get update
sudo apt-get install vdr-plugin-sc vdr-plugin-sc-cardclient

Hardware:
Hauppauge dvb-s PCI

CardServer steht im internen Netz, funktioniert auch mit der Dreambox.

Cardclient Zeile sieht so aus:
cccam2:192.168.178.230:12000:0/0000/0000:Userasswort

Was mir auffällt sind diese beiden Zeilen:
Okt 24 08:35:25.233 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:35:25.233 [general.error] socket: EOF on read
Aber leider weiß ich nicht genau bzw. hab auch nicht gefunden, wie man es behebt.

Logauszug:

Spoiler

vdr@yavdr01:/home/basti$ vdr "-P sc" "-P streamdev-server"
Okt 24 08:35:25.193 [general.debug] using new 1.7.11+ capture code
Okt 24 08:35:25.207 [general.error] failed to open logfile '/var/log/vdr-sc': Keine Berechtigung
Okt 24 08:35:25.207 [general.debug] capturing device 0/0 (subsystem ID 00709202)
Okt 24 08:35:25.207 [general.debug] creating standard device 0/0
Okt 24 08:35:25.228 [general.info] SC version 1.0.0pre-AR-29b7b5f231c8 initializing (VDR 2.0.2)
vdr: no primary device found - using first device!
Okt 24 08:35:25.229 [general.info] SC version 1.0.0pre-AR-29b7b5f231c8 starting (VDR 2.0.2)
Okt 24 08:35:25.229 [core.load] ** Plugin config:
Okt 24 08:35:25.229 [core.load] ** Key updates (AU) are enabled (active CAIDs) (no prestart)
Okt 24 08:35:25.229 [core.load] ** Local systems DON'T take priority over cached remote
Okt 24 08:35:25.229 [core.load] ** Concurrent FF recordings are NOT allowed
Okt 24 08:35:25.229 [core.load] ** Force transfermode with digital audio
Okt 24 08:35:25.229 [core.load] ** ECM cache is set to enabled
Okt 24 08:35:25.229 [core.load] ** TsBufferSize is 4 MB
Okt 24 08:35:25.229 [core.load] ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Okt 24 08:35:25.229 [general.info] loading cardclient config from /var/lib/vdr/plugins/sc/cardclient.conf
Okt 24 08:35:25.229 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:35:25.229 [cardclient.cccam2] logout from server initiated
Okt 24 08:35:25.229 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:35:25.229 [cardclient.cccam2extra] network shut down
Okt 24 08:35:25.229 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:35:25.229 [cardclient.cccam2extra] logout done
Okt 24 08:35:25.229 [cardclient.core] hostname=192.168.178.230 port=12000 emm=0 emmCaids 0000/0000
Okt 24 08:35:25.229 [cardclient.core] cccam2: username=Home password=12345
Okt 24 08:35:25.229 [cardclient.core] our nodeid: ee 6c f6 93 dc 0f b8 cc
Okt 24 08:35:25.229 [cardclient.core] pretended CCcam version '2.0.11' build '2892'
Okt 24 08:35:25.229 [cardclient.core] client 'cccam2' ready
Okt 24 08:35:25.229 [cardclient.cccam2] logout from server initiated
Okt 24 08:35:25.229 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:35:25.229 [cardclient.cccam2extra] network shut down
Okt 24 08:35:25.229 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:35:25.229 [cardclient.cccam2extra] logout done
Okt 24 08:35:25.230 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:35:25.231 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:35:25.232 [cardclient.login] CCcam login succeed
Okt 24 08:35:25.232 [general.info] loading overrides from /var/lib/vdr/plugins/sc/override.conf
Okt 24 08:35:25.233 [core.override] ecmprio: S19.2E: - chain 0d05
Okt 24 08:35:25.233 [core.load] loaded 1 overrides from /var/lib/vdr/plugins/sc/override.conf
Okt 24 08:35:25.233 [general.info] loading ecm cache from /var/lib/vdr/plugins/sc/ecm.cache
Okt 24 08:35:25.233 [core.load] ** registered systems:
Okt 24 08:35:25.233 [core.load] ** Cardclient (pri -15)
Okt 24 08:35:25.233 [general.info] Using software decryption on card 0/0
Okt 24 08:35:25.233 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:35:25.233 [general.error] socket: EOF on read
Okt 24 08:35:25.234 [cardclient.core] recv error. reconnecting...
Okt 24 08:35:25.234 [cardclient.cccam2] logout from server initiated
Okt 24 08:35:25.234 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:35:25.234 [cardclient.cccam2extra] network shut down
Okt 24 08:35:25.234 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:35:25.234 [cardclient.cccam2extra] logout done
Okt 24 08:35:25.240 [core.ci] card 0/0, slot 0 (v= 1) caids: 0100 0500 098c 09c4 1811 1833 1817 1818 1863 1819 1702 0648 0d05 0d95 1810 1812 0b00 1837 0624 09af 0d96 0650 0d98 1830 1843 1860 09b2 0b02 17ff 1836 1861 1867
Okt 24 08:35:25.240 [core.ci] 0/0: reset of slot 0 requested
Okt 24 08:35:25.995 [core.ci] 0/0.0: doReply changed, reset triggered
Okt 24 08:35:25.995 [core.ci] 0/0.0: now using CAIDs version 1
Okt 24 08:35:25.995 [core.ci] 0/0.0: status 'present'
Okt 24 08:35:26.095 [core.ci] 0/0.0: status 'reset'
Okt 24 08:35:26.696 [core.ci] 0/0.0: status 'ready'
Okt 24 08:35:26.847 [core.ci] 0/0.0 -> 00 01 82 01 01
Okt 24 08:35:26.847 [core.ci] 0/0.0 <- 00 01 83 01 01 80 02 01 80
Okt 24 08:35:26.847 [core.ci] 0/0.0 -> 00 01 81 01 01
Okt 24 08:35:26.847 [core.ci] 0/0.0 <- 00 01 a0 07 01 91 04 00 03 00 41 80 02 01 00
Okt 24 08:35:26.847 [core.ci] 0/0.0 -> 00 01 a0 0a 01 92 07 00 00 03 00 41 00 01
Okt 24 08:35:26.847 [core.ci] 0/0.0 -> 00 01 a0 09 01 90 02 00 01 9f 80 30 00
Okt 24 08:35:26.847 [core.ci] 0/0.0 sending CA info
Okt 24 08:35:26.847 [core.ci] 0/0.0 -> 00 01 81 01 01
Okt 24 08:35:26.847 [core.ci] 0/0.0 <- 00 01 a0 49 01 90 02 00 01 9f 80 31 40 01 00 05 00 09 8c 09 c4 18 11 18 33 18 17 18 18 18 63 18 19 17 02 06 48 0d 05 0d 95 18 10 18 12 0b 00 18 37 06 24 09 af 0d 96 06 50 0d 98 18 30 18 43 18 60 09 b2 0b 02 17 ff 18 36 18 61 18 67 80 02 01 00
Okt 24 08:35:27.848 [core.ci] 0/0.0 -> 00 01 a0 10 01 90 02 00 01 9f 80 32 07 03 00 00 01 00 01 03
Okt 24 08:35:27.848 [core.ci] 0/0.0 CA_PMT decoding len=7 lm=3 prg=0 len=1/1 ci_cmd(G)=03
Okt 24 08:35:27.848 [core.ci] 0/0.0 got CA pmt ciCmd=3 caLm=3
Okt 24 08:35:27.848 [core.ci] 0/0.0 answer to query
Okt 24 08:35:27.848 [core.ci] 0/0.0 no action taken
Okt 24 08:35:27.848 [core.ci] 0/0.0 -> 00 01 81 01 01
Okt 24 08:35:27.848 [core.ci] 0/0.0 <- 00 01 a0 0d 01 90 02 00 01 9f 80 33 04 00 00 00 81 80 02 01 00
Okt 24 08:36:23.164 [core.pids] 0/0: now tuned to source 5300ff40(S19.2E) transponder 1b59f
Okt 24 08:36:23.214 [core.ci] 0/0.0 -> 00 01 a0 19 01 90 02 00 01 9f 80 32 10 04 00 dd 01 00 00 02 07 ff 00 00 04 08 00 00 00
Okt 24 08:36:23.214 [core.ci] 0/0.0 CA_PMT decoding len=10 lm=4 prg=221 len=0/a pid=2,7ff len=0/5 pid=4,800 len=0/0
Okt 24 08:36:23.214 [core.ci] 0/0.0 got CA pmt ciCmd=-1 caLm=4
Okt 24 08:36:23.214 [core.ci] 0/0.0 answer to query surpressed
Okt 24 08:36:23.214 [core.ci] 0/0.0 set CAM decrypt (prg 221)
Okt 24 08:36:23.214 [core.pids] 0/0: add SID 221 (zero=0 noshift=1)
Okt 24 08:36:23.214 [core.pids] 0/0: pids VIDEO=07ff AUDIO=0800
Okt 24 08:36:23.214 [core.pids] Ca descriptors after simplify (pidCa=0)
Okt 24 08:36:23.214 [core.pids] prgca: <empty>
Okt 24 08:36:23.214 [core.pids] pidca 07ff: <empty>
Okt 24 08:36:23.214 [core.pids] pidca 0800: <empty>
Okt 24 08:36:23.214 [core.pids] 0/0: SID=221 zero=0 | sid=-/-/- zero=-/-/- idle=-/-/-
Okt 24 08:36:23.214 [core.pids] 0/0: found handler for SID 221 (0/0.1 idle=1 idx=1)
Okt 24 08:36:23.214 [core.ecm] 0/0.1: setting new SID 221
Okt 24 08:36:23.214 [core.pids] 0/0.1: pids on entry
Okt 24 08:36:23.214 [core.pids] 0/0.1: pids after delete
Okt 24 08:36:23.214 [core.pids] 0/0: descrambling pid 07ff on index 1
Okt 24 08:36:23.214 [core.pids] 0/0: descrambling pid 0800 on index 1
Okt 24 08:36:23.214 [core.pids] 0/0.1: pids after add VIDEO=07ff AUDIO=0800
Okt 24 08:36:23.214 [core.ecm] 0/0.1: is no longer idle
Okt 24 08:36:23.274 [core.ecm] 0/0.1: triggered SID -1/221 idx -1/1 mode -1/0 -
Okt 24 08:36:33.877 [core.ci] 0/0.0 -> 00 01 a0 30 01 90 02 00 01 9f 80 32 27 05 00 dd 01 00 21 01 09 06 17 02 f7 6a 00 6a 09 04 18 33 f8 6a 09 04 09 c4 fb 6a 09 04 09 af ff 6a 09 04 09 8c fa 6a
Okt 24 08:36:33.877 [core.ci] 0/0.0 CA_PMT decoding len=27 lm=5 prg=221 len=21/21 ci_cmd(G)=01
Okt 24 08:36:33.877 [core.ci] 0/0.0 got CA pmt ciCmd=1 caLm=5
Okt 24 08:36:33.877 [core.ci] 0/0.0 answer to query surpressed
Okt 24 08:36:33.877 [core.ci] 0/0.0 set CAM decrypt (prg 221)
Okt 24 08:36:33.877 [core.pids] 0/0: update SID 221 (zero=0 noshift=1)
Okt 24 08:36:33.877 [core.pids] 0/0: SID=221 zero=0 | sid=1/221/0 zero=-/-/- idle=-/-/-
Okt 24 08:36:33.877 [core.pids] 0/0: found handler for SID 221 (0/0.1 idle=0 idx=1)
Okt 24 08:36:33.877 [core.pids] 0/0.1: pids on entry VIDEO=07ff AUDIO=0800
Okt 24 08:36:33.877 [core.pids] 0/0.1: pids after delete
Okt 24 08:36:33.877 [core.pids] 0/0.1: pids after add
Okt 24 08:36:33.877 [core.ecm] 0/0.1: is idle now
Okt 24 08:36:34.578 [core.pids] 0/0: tune to same source/transponder
Okt 24 08:36:34.628 [core.ci] 0/0.0 -> 00 01 a0 3a 01 90 02 00 01 9f 80 32 31 04 00 de 01 00 21 01 09 06 17 02 f7 8c 00 8c 09 04 18 33 f8 8c 09 04 09 c4 fb 8c 09 04 09 af ff 8c 09 04 09 8c fa 8c 02 08 ff 00 00 04 09 00 00 00
Okt 24 08:36:34.628 [core.ci] 0/0.0 CA_PMT decoding len=31 lm=4 prg=222 len=21/2b ci_cmd(G)=01 pid=2,8ff len=0/5 pid=4,900 len=0/0
Okt 24 08:36:34.628 [core.ci] 0/0.0 got CA pmt ciCmd=1 caLm=4
Okt 24 08:36:34.628 [core.ci] 0/0.0 answer to query surpressed
Okt 24 08:36:34.628 [core.ci] 0/0.0 set CAM decrypt (prg 222)
Okt 24 08:36:34.628 [core.pids] 0/0: add SID 222 (zero=0 noshift=1)
Okt 24 08:36:34.628 [core.pids] 0/0: pids VIDEO=08ff AUDIO=0900
Okt 24 08:36:34.628 [core.pids] Ca descriptors after simplify (pidCa=0)
Okt 24 08:36:34.628 [core.pids] prgca: 09 06 17 02 F7 8C 00 8C 09 04 18 33 F8 8C 09 04 09 C4 FB 8C 09 04 09 AF FF 8C 09 04 09 8C FA 8C
Okt 24 08:36:34.628 [core.pids] pidca 08ff: <empty>
Okt 24 08:36:34.628 [core.pids] pidca 0900: <empty>
Okt 24 08:36:34.628 [core.pids] 0/0: SID=222 zero=0 | sid=-/-/- zero=-/-/- idle=1/221/1
Okt 24 08:36:34.628 [core.pids] 0/0: found handler for SID 222 (0/0.1 idle=1 idx=1)
Okt 24 08:36:34.628 [core.ecm] 0/0.1: setting new SID 222
Okt 24 08:36:34.628 [core.pids] 0/0.1: pids on entry
Okt 24 08:36:34.628 [core.pids] 0/0.1: pids after delete
Okt 24 08:36:34.628 [core.pids] 0/0: descrambling pid 08ff on index 1
Okt 24 08:36:34.629 [core.pids] 0/0: descrambling pid 0900 on index 1
Okt 24 08:36:34.629 [core.pids] 0/0.1: pids after add VIDEO=08ff AUDIO=0900
Okt 24 08:36:34.629 [core.ecm] 0/0.1: is no longer idle
Okt 24 08:36:34.687 [core.ecm] 0/0.1: triggered SID 221/222 idx 1/1 mode 1/0 -
Okt 24 08:36:34.687 [core.ecm] 0/0.1: new caDescr: 09 06 17 02 F7 8C 00 8C 09 04 18 33 F8 8C 09 04 09 C4 FB 8C 09 04 09 AF FF 8C 09 04 09 8C FA 8C
Okt 24 08:36:34.687 [core.ecm] 0/0.1: CA descriptors for SID 222 (len=32)
Okt 24 08:36:34.687 [core.ecm] 0/0.1: descriptor 17 02 f7 8c 00 8c
Okt 24 08:36:34.687 [core.override] ecmprio: 1702/0 pri -1
Okt 24 08:36:34.688 [core.ecm] 0/0.1: found 1702(0000) (Cardclient) id 0000 with ecm 178c/80 (new)
Okt 24 08:36:34.688 [core.ecm] 0/0.1: descriptor 18 33 f8 8c
Okt 24 08:36:34.688 [core.override] ecmprio: 1833/0 pri -1
Okt 24 08:36:34.688 [core.ecm] 0/0.1: found 1833(0000) (Cardclient) id 0000 with ecm 188c/80 (new)
Okt 24 08:36:34.688 [core.ecm] 0/0.1: descriptor 09 c4 fb 8c
Okt 24 08:36:34.688 [core.override] ecmprio: 09c4/0 pri -1
Okt 24 08:36:34.688 [core.ecm] 0/0.1: found 09c4(0000) (Cardclient) id 0000 with ecm 1b8c/80 (new)
Okt 24 08:36:34.688 [core.ecm] 0/0.1: descriptor 09 af ff 8c
Okt 24 08:36:34.688 [core.override] ecmprio: 09af/0 pri -1
Okt 24 08:36:34.688 [core.ecm] 0/0.1: found 09af(0000) (Cardclient) id 0000 with ecm 1f8c/80 (new)
Okt 24 08:36:34.688 [core.ecm] 0/0.1: descriptor 09 8c fa 8c
Okt 24 08:36:34.688 [core.override] ecmprio: 098c/0 pri -1
Okt 24 08:36:34.688 [core.ecm] 0/0.1: found 098c(0000) (Cardclient) id 0000 with ecm 1a8c/80 (new)
Okt 24 08:36:34.688 [core.ecm] 0/0.1: try system Cardclient (1702) id 0000 with ecm 178c (pri=-15)
Okt 24 08:36:34.764 [core.au] 0/0: chain caid 1702 -> Cardclient(-15) [1000-82/ff]
Okt 24 08:36:34.764 [core.au] 0/0: chain caid 1722 -> Cardclient(-15) [1502-82/ff]
Okt 24 08:36:34.764 [core.au] 0/0: chain caid 1833 -> Cardclient(-15) [1002-82/fe]
Okt 24 08:36:34.764 [core.au] 0/0: chain caid 1836 -> Cardclient(-15) [1002-82/fe]
Okt 24 08:36:34.764 [core.au] 0/0: chain caid 09c4 -> Cardclient(-15) [1008-82/ff]
Okt 24 08:36:34.764 [core.au] 0/0: chain caid 09af -> Cardclient(-15) [1009-82/ff]
Okt 24 08:36:34.764 [core.au] 0/0: chain caid 098c -> Cardclient(-15) [1008-82/ff]
Okt 24 08:36:34.764 [core.au] 0/0: starting chain 1702
Okt 24 08:36:34.814 [cardclient.core] cc-loop
Okt 24 08:36:34.814 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:34.815 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:34.815 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:34.815 [cardclient.cccam2extra] network shut down
Okt 24 08:36:34.815 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:34.815 [cardclient.cccam2extra] logout done
Okt 24 08:36:34.815 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:36:34.816 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:36:34.817 [cardclient.login] CCcam login succeed
Okt 24 08:36:34.817 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (3 ms)
Okt 24 08:36:34.818 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:36:34.818 [general.error] socket: EOF on read
Okt 24 08:36:34.818 [cardclient.core] recv error. reconnecting...
Okt 24 08:36:34.818 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:34.818 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:34.818 [cardclient.cccam2extra] network shut down
Okt 24 08:36:34.818 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:34.818 [cardclient.cccam2extra] logout done
Okt 24 08:36:35.063 [cardclient.core] cc-loop
Okt 24 08:36:35.063 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:35.063 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:35.063 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:35.063 [cardclient.cccam2extra] network shut down
Okt 24 08:36:35.063 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:35.063 [cardclient.cccam2extra] logout done
Okt 24 08:36:35.063 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:36:35.064 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:36:35.065 [cardclient.login] CCcam login succeed
Okt 24 08:36:35.065 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (3 ms)
Okt 24 08:36:35.066 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:36:35.066 [general.error] socket: EOF on read
Okt 24 08:36:35.066 [cardclient.core] recv error. reconnecting...
Okt 24 08:36:35.066 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:35.066 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:35.067 [cardclient.cccam2extra] network shut down
Okt 24 08:36:35.067 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:35.067 [cardclient.cccam2extra] logout done
Okt 24 08:36:35.316 [core.au] 0/0: starting chain 1833
Okt 24 08:36:35.316 [core.ecm] 0/0.1: try system Cardclient (1833) id 0000 with ecm 188c (pri=-15)
Okt 24 08:36:35.564 [cardclient.core] cc-loop
Okt 24 08:36:35.564 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:35.564 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:35.564 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:35.564 [cardclient.cccam2extra] network shut down
Okt 24 08:36:35.564 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:35.564 [cardclient.cccam2extra] logout done
Okt 24 08:36:35.564 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:36:35.680 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:36:35.680 [cardclient.login] CCcam login succeed
Okt 24 08:36:35.681 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (116 ms)
Okt 24 08:36:35.681 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:36:35.681 [general.error] socket: EOF on read
Okt 24 08:36:35.681 [cardclient.core] recv error. reconnecting...
Okt 24 08:36:35.682 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:35.682 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:35.682 [cardclient.cccam2extra] network shut down
Okt 24 08:36:35.682 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:35.682 [cardclient.cccam2extra] logout done
Okt 24 08:36:35.812 [cardclient.core] cc-loop
Okt 24 08:36:35.812 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:35.812 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:35.812 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:35.812 [cardclient.cccam2extra] network shut down
Okt 24 08:36:35.812 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:35.812 [cardclient.cccam2extra] logout done
Okt 24 08:36:35.812 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:36:35.814 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:36:35.815 [cardclient.login] CCcam login succeed
Okt 24 08:36:35.815 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (3 ms)
Okt 24 08:36:35.816 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:36:35.817 [general.error] socket: EOF on read
Okt 24 08:36:35.817 [cardclient.core] recv error. reconnecting...
Okt 24 08:36:35.817 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:35.817 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:35.817 [cardclient.cccam2extra] network shut down
Okt 24 08:36:35.817 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:35.817 [cardclient.cccam2extra] logout done
Okt 24 08:36:36.065 [core.au] 0/0: starting chain 09c4
Okt 24 08:36:36.065 [core.ecm] 0/0.1: try system Cardclient (09c4) id 0000 with ecm 1b8c (pri=-15)
Okt 24 08:36:36.212 [cardclient.core] cc-loop
Okt 24 08:36:36.212 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:36.212 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:36.212 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:36.212 [cardclient.cccam2extra] network shut down
Okt 24 08:36:36.212 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:36.212 [cardclient.cccam2extra] logout done
Okt 24 08:36:36.212 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:36:36.258 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:36:36.259 [cardclient.login] CCcam login succeed
Okt 24 08:36:36.259 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (47 ms)
Okt 24 08:36:36.261 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:36:36.261 [general.error] socket: EOF on read
Okt 24 08:36:36.261 [cardclient.core] recv error. reconnecting...
Okt 24 08:36:36.261 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:36.261 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:36.261 [cardclient.cccam2extra] network shut down
Okt 24 08:36:36.261 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:36.261 [cardclient.cccam2extra] logout done
Okt 24 08:36:36.465 [cardclient.core] cc-loop
Okt 24 08:36:36.465 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:36.466 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:36.466 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:36.466 [cardclient.cccam2extra] network shut down
Okt 24 08:36:36.466 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:36.466 [cardclient.cccam2extra] logout done
Okt 24 08:36:36.466 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:36:36.467 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:36:36.469 [cardclient.login] CCcam login succeed
Okt 24 08:36:36.469 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (4 ms)
Okt 24 08:36:36.470 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:36:36.470 [general.error] socket: EOF on read
Okt 24 08:36:36.470 [cardclient.core] recv error. reconnecting...
Okt 24 08:36:36.470 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:36.470 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:36.470 [cardclient.cccam2extra] network shut down
Okt 24 08:36:36.470 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:36.470 [cardclient.cccam2extra] logout done
Okt 24 08:36:36.714 [core.au] 0/0: starting chain 09af
Okt 24 08:36:36.714 [core.ecm] 0/0.1: try system Cardclient (09af) id 0000 with ecm 1f8c (pri=-15)
Okt 24 08:36:36.962 [cardclient.core] cc-loop
Okt 24 08:36:36.962 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:36.962 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:36.962 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:36.962 [cardclient.cccam2extra] network shut down
Okt 24 08:36:36.962 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:36.962 [cardclient.cccam2extra] logout done
Okt 24 08:36:36.962 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:36:37.006 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:36:37.007 [cardclient.login] CCcam login succeed
Okt 24 08:36:37.007 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (45 ms)
Okt 24 08:36:37.009 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:36:37.009 [general.error] socket: EOF on read
Okt 24 08:36:37.009 [cardclient.core] recv error. reconnecting...
Okt 24 08:36:37.009 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:37.009 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:37.009 [cardclient.cccam2extra] network shut down
Okt 24 08:36:37.009 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:37.009 [cardclient.cccam2extra] logout done
Okt 24 08:36:37.215 [cardclient.core] cc-loop
Okt 24 08:36:37.215 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:37.215 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:37.215 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:37.215 [cardclient.cccam2extra] network shut down
Okt 24 08:36:37.215 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:37.215 [cardclient.cccam2extra] logout done
Okt 24 08:36:37.215 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:36:37.258 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:36:37.259 [cardclient.login] CCcam login succeed
Okt 24 08:36:37.259 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (44 ms)
Okt 24 08:36:37.261 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:36:37.261 [general.error] socket: EOF on read
Okt 24 08:36:37.261 [cardclient.core] recv error. reconnecting...
Okt 24 08:36:37.261 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:37.261 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:37.261 [cardclient.cccam2extra] network shut down
Okt 24 08:36:37.261 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:37.261 [cardclient.cccam2extra] logout done
Okt 24 08:36:37.463 [core.au] 0/0: starting chain 098c
Okt 24 08:36:37.463 [core.ecm] 0/0.1: try system Cardclient (098c) id 0000 with ecm 1a8c (pri=-15)
Okt 24 08:36:37.711 [cardclient.core] cc-loop
Okt 24 08:36:37.711 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:37.711 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:37.711 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:37.711 [cardclient.cccam2extra] network shut down
Okt 24 08:36:37.711 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:37.711 [cardclient.cccam2extra] logout done
Okt 24 08:36:37.712 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:36:37.713 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:36:37.714 [cardclient.login] CCcam login succeed
Okt 24 08:36:37.714 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (3 ms)
Okt 24 08:36:37.715 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:36:37.715 [general.error] socket: EOF on read
Okt 24 08:36:37.715 [cardclient.core] recv error. reconnecting...
Okt 24 08:36:37.715 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:37.715 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:37.716 [cardclient.cccam2extra] network shut down
Okt 24 08:36:37.716 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:37.716 [cardclient.cccam2extra] logout done
Okt 24 08:36:37.965 [cardclient.core] cc-loop
Okt 24 08:36:37.965 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:37.965 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:37.965 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:37.965 [cardclient.cccam2extra] network shut down
Okt 24 08:36:37.965 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:37.965 [cardclient.cccam2extra] logout done
Okt 24 08:36:37.965 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:36:38.010 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:36:38.011 [cardclient.login] CCcam login succeed
Okt 24 08:36:38.011 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (47 ms)
Okt 24 08:36:38.012 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:36:38.012 [general.error] socket: EOF on read
Okt 24 08:36:38.012 [cardclient.core] recv error. reconnecting...
Okt 24 08:36:38.012 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:38.012 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:38.012 [cardclient.cccam2extra] network shut down
Okt 24 08:36:38.012 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:38.012 [cardclient.cccam2extra] logout done
Okt 24 08:36:38.213 [core.ecm] 0/0.1: CA descriptors for SID 222 (len=32)
Okt 24 08:36:38.213 [core.ecm] 0/0.1: descriptor 17 02 f7 8c 00 8c
Okt 24 08:36:38.213 [core.override] ecmprio: 1702/0 pri -1
Okt 24 08:36:38.213 [core.ecm] 0/0.1: found 1702(0000) (Cardclient) id 0000 with ecm 178c/80 (already present)
Okt 24 08:36:38.213 [core.ecm] 0/0.1: descriptor 18 33 f8 8c
Okt 24 08:36:38.213 [core.override] ecmprio: 1833/0 pri -1
Okt 24 08:36:38.213 [core.ecm] 0/0.1: found 1833(0000) (Cardclient) id 0000 with ecm 188c/80 (already present)
Okt 24 08:36:38.213 [core.ecm] 0/0.1: descriptor 09 c4 fb 8c
Okt 24 08:36:38.213 [core.override] ecmprio: 09c4/0 pri -1
Okt 24 08:36:38.213 [core.ecm] 0/0.1: found 09c4(0000) (Cardclient) id 0000 with ecm 1b8c/80 (already present)
Okt 24 08:36:38.213 [core.ecm] 0/0.1: descriptor 09 af ff 8c
Okt 24 08:36:38.213 [core.override] ecmprio: 09af/0 pri -1
Okt 24 08:36:38.213 [core.ecm] 0/0.1: found 09af(0000) (Cardclient) id 0000 with ecm 1f8c/80 (already present)
Okt 24 08:36:38.213 [core.ecm] 0/0.1: descriptor 09 8c fa 8c
Okt 24 08:36:38.213 [core.override] ecmprio: 098c/0 pri -1
Okt 24 08:36:38.213 [core.ecm] 0/0.1: found 098c(0000) (Cardclient) id 0000 with ecm 1a8c/80 (already present)
Okt 24 08:36:38.213 [core.ecm] 0/0.1: try system Cardclient (1702) id 0000 with ecm 178c (pri=-15)
Okt 24 08:36:38.324 [cardclient.core] cc-loop
Okt 24 08:36:38.324 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:38.324 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:38.324 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:38.324 [cardclient.cccam2extra] network shut down
Okt 24 08:36:38.324 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:38.324 [cardclient.cccam2extra] logout done
Okt 24 08:36:38.324 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:36:38.326 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:36:38.327 [cardclient.login] CCcam login succeed
Okt 24 08:36:38.327 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (3 ms)
Okt 24 08:36:38.328 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:36:38.328 [general.error] socket: EOF on read
Okt 24 08:36:38.328 [cardclient.core] recv error. reconnecting...
Okt 24 08:36:38.328 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:38.328 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:38.328 [cardclient.cccam2extra] network shut down
Okt 24 08:36:38.328 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:38.328 [cardclient.cccam2extra] logout done
Okt 24 08:36:38.577 [cardclient.core] cc-loop
Okt 24 08:36:38.577 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:38.577 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:38.577 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:38.577 [cardclient.cccam2extra] network shut down
Okt 24 08:36:38.577 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:38.577 [cardclient.cccam2extra] logout done
Okt 24 08:36:38.578 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:36:38.623 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:36:38.624 [cardclient.login] CCcam login succeed
Okt 24 08:36:38.624 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (47 ms)
Okt 24 08:36:38.625 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:36:38.625 [general.error] socket: EOF on read
Okt 24 08:36:38.625 [cardclient.core] recv error. reconnecting...
Okt 24 08:36:38.625 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:38.625 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:38.625 [cardclient.cccam2extra] network shut down
Okt 24 08:36:38.625 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:38.625 [cardclient.cccam2extra] logout done
Okt 24 08:36:38.826 [core.ecm] 0/0.1: try system Cardclient (1833) id 0000 with ecm 188c (pri=-15)
Okt 24 08:36:39.079 [cardclient.core] cc-loop
Okt 24 08:36:39.079 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:39.079 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:39.079 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:39.079 [cardclient.cccam2extra] network shut down
Okt 24 08:36:39.079 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:39.079 [cardclient.cccam2extra] logout done
Okt 24 08:36:39.079 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:36:39.081 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:36:39.082 [cardclient.login] CCcam login succeed
Okt 24 08:36:39.082 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (3 ms)
Okt 24 08:36:39.083 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:36:39.083 [general.error] socket: EOF on read
Okt 24 08:36:39.083 [cardclient.core] recv error. reconnecting...
Okt 24 08:36:39.083 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:39.083 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:39.083 [cardclient.cccam2extra] network shut down
Okt 24 08:36:39.083 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:39.083 [cardclient.cccam2extra] logout done
Okt 24 08:36:39.327 [cardclient.core] cc-loop
Okt 24 08:36:39.327 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:39.327 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:39.327 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:39.327 [cardclient.cccam2extra] network shut down
Okt 24 08:36:39.327 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:39.327 [cardclient.cccam2extra] logout done
Okt 24 08:36:39.327 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 08:36:39.359 [cardclient.cccam2extra] welcome checksum correct
Okt 24 08:36:39.361 [cardclient.login] CCcam login succeed
Okt 24 08:36:39.361 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (34 ms)
Okt 24 08:36:39.365 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 08:36:39.365 [general.error] socket: EOF on read
Okt 24 08:36:39.366 [cardclient.core] recv error. reconnecting...
Okt 24 08:36:39.366 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:39.366 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:39.366 [cardclient.cccam2extra] network shut down
Okt 24 08:36:39.366 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:39.366 [cardclient.cccam2extra] logout done
Okt 24 08:36:39.575 [core.ecm] 0/0.1: try system Cardclient (09c4) id 0000 with ecm 1b8c (pri=-15)
Okt 24 08:36:39.712 [cardclient.core] cc-loop
Okt 24 08:36:39.712 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:39.712 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM already cached as failed
Okt 24 08:36:39.835 [core.ci] 0/0.0 -> 00 01 a0 30 01 90 02 00 01 9f 80 32 27 05 00 de 01 00 21 01 09 06 17 02 f7 8c 00 8c 09 04 18 33 f8 8c 09 04 09 c4 fb 8c 09 04 09 af ff 8c 09 04 09 8c fa 8c
Okt 24 08:36:39.835 [core.ci] 0/0.0 CA_PMT decoding len=27 lm=5 prg=222 len=21/21 ci_cmd(G)=01
Okt 24 08:36:39.835 [core.ci] 0/0.0 got CA pmt ciCmd=1 caLm=5
Okt 24 08:36:39.835 [core.ci] 0/0.0 answer to query surpressed
Okt 24 08:36:39.835 [core.ci] 0/0.0 set CAM decrypt (prg 222)
Okt 24 08:36:39.835 [core.pids] 0/0: update SID 222 (zero=0 noshift=1)
Okt 24 08:36:39.835 [core.pids] 0/0: SID=222 zero=0 | sid=1/222/0 zero=-/-/- idle=-/-/-
Okt 24 08:36:39.835 [core.pids] 0/0: found handler for SID 222 (0/0.1 idle=0 idx=1)
Okt 24 08:36:39.835 [core.pids] 0/0.1: pids on entry VIDEO=08ff AUDIO=0900
Okt 24 08:36:39.835 [core.pids] 0/0.1: pids after delete
Okt 24 08:36:39.835 [core.pids] 0/0.1: pids after add
Okt 24 08:36:39.835 [core.ecm] 0/0.1: is idle now
Okt 24 08:36:39.965 [cardclient.core] cc-loop
Okt 24 08:36:39.965 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:39.965 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM already cached as failed
Okt 24 08:36:39.965 [core.ecm] 0/0.1: try system Cardclient (09af) id 0000 with ecm 1f8c (pri=-15)
Okt 24 08:36:40.213 [cardclient.core] cc-loop
Okt 24 08:36:40.213 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 08:36:40.213 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM already cached as failed
Okt 24 08:36:40.276 [core.au] 0/0: stopping chain 1702
Okt 24 08:36:40.277 [core.au] 0/0: stopping chain 1833
Okt 24 08:36:40.277 [core.au] 0/0: stopping chain 09c4
Okt 24 08:36:40.277 [core.au] 0/0: stopping chain 09af
Okt 24 08:36:40.277 [core.au] 0/0: stopping chain 098c
Okt 24 08:36:40.347 [cardclient.cccam2] logout from server initiated
Okt 24 08:36:40.347 [cardclient.cccam2extra] reader thread stopped
Okt 24 08:36:40.347 [cardclient.cccam2extra] network shut down
Okt 24 08:36:40.347 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 08:36:40.347 [cardclient.cccam2extra] logout done
Okt 24 08:36:40.347 [general.debug] SC cleanup done

Schonmal vielen Dank für eure Antworten.
Basti

 

[sveni_lee]

AW: yaVDR 0.5a SC-Plugin funktioniert nicht... weiß nicht mehr weiter

hast du gesehen, das es hier heute früh ein update gab...
sollte jetzt eigendlich wieder gehen...

 

[nws_basti]

AW: yaVDR 0.5a SC-Plugin funktioniert nicht... weiß nicht mehr weiter

Oh, das habe ich nicht gesehen.
Vielen Dank, das werde ich dann mal durchführen.

 

[sveni_lee]

AW: yaVDR 0.5a SC-Plugin funktioniert nicht... weiß nicht mehr weiter

sag bescheid... wenn es geht...:emoticon-0142-happy

 

[nws_basti]

AW: yaVDR 0.5a SC-Plugin funktioniert nicht... weiß nicht mehr weiter

Hab es gerade ausprobiert, leider alles beim Alten. Keine Verbesserungen. Log sieht genau so aus, wie schon oben gepostet.


Ach, was ich vergessen habe. Das System soll als TV Headend laufen.

 

[legenwaitforitdary]

AW: yaVDR 0.5a SC-Plugin funktioniert nicht... weiß nicht mehr weiter

Du solltest die passende CAID in deiner cardclient.conf angeben, außerdem diese am besten in einer override.conf priorisieren und die falschen ignorieren, auf welche Karte, welchen Server willst du denn zugreifen?

Ich nehme an mit "TV headend" meinst du "headless Server" ?
TVHeadend ist n Backend und hat mit yavdr nämlich nicht wirklich was zu tun.

 

[nws_basti]

AW: yaVDR 0.5a SC-Plugin funktioniert nicht... weiß nicht mehr weiter

Im Cardclient habe ich dies drin stehen: cccam2:192.168.178.230:12000:0/0000/0000:Userasswort
Als Karte habe die V13 09c4 und die läuft im Alix Server.

Die override.conf habe ich bis jetzt nicht gefüllt, da ich dachte das ich diese nicht brauche.
Ja, ich meinte headless Server

 

[legenwaitforitdary]

AW: yaVDR 0.5a SC-Plugin funktioniert nicht... weiß nicht mehr weiter

Dann ersetz doch zuerst mal die ersten vier Nullen mit 09C4 und die zweiten vier mit FFFF, evtl ändert das bereits was. Die erste Null in der Zeile solltest du mit einer 1 ersetzten, damit deine Karte auch Updates bekommt, außer du möchtest das explizit nicht.

 

[nws_basti]

AW: yaVDR 0.5a SC-Plugin funktioniert nicht... weiß nicht mehr weiter

Hab das gerade schon getestet, aber auch hier kein Erfolg.

- - - - - - - - - -

Was mich bisschen irritiert sind folgende Zeilen (rot markiert)

Okt 24 14:02:19.931 [cardclient.core] cc-loop
Okt 24 14:02:19.931 [cardclient.core] now trying client cccam2 (192.168.178.230:12000)
Okt 24 14:02:19.931 [cardclient.cccam2] logout from server initiated
Okt 24 14:02:19.931 [cardclient.cccam2extra] reader thread stopped
Okt 24 14:02:19.931 [cardclient.cccam2extra] network shut down
Okt 24 14:02:19.931 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 14:02:19.931 [cardclient.cccam2extra] logout done
Okt 24 14:02:19.931 [core.net] connecting to 192.168.178.230:12000/tcp (192.168.178.230)
Okt 24 14:02:19.977 [cardclient.cccam2extra] welcome checksum correct
Okt 24 14:02:19.978 [cardclient.login] CCcam login succeed
Okt 24 14:02:19.978 [cardclient.core] client cccam2 (192.168.178.230:12000) ECM failed (47 ms)
Okt 24 14:02:19.979 [cardclient.cccam2] server can't decode this ecm, (0 pending)
Okt 24 14:02:19.980 [general.error] socket: EOF on read
Okt 24 14:02:19.980 [cardclient.core] recv error. reconnecting...
Okt 24 14:02:19.980 [cardclient.cccam2] logout from server initiated
Okt 24 14:02:19.980 [cardclient.cccam2extra] reader thread stopped
Okt 24 14:02:19.980 [cardclient.cccam2extra] network shut down
Okt 24 14:02:19.980 [cardclient.cccam2extra] cmd 0c crypt mode now 0
Okt 24 14:02:19.980 [cardclient.cccam2extra] logout done
Okt 24 14:02:20.179 [cardclient.core] cc-loop

Hier auch noch mal die override.conf:
ignore:{*}0648:1833:1837:1843:1702:0d95:098c:09af:09c7:1722:1861:1830:1860:0d00:0500:0b00:1817:1818:1819
ecmprio:{S19.2E:}0d05:09c4

Und die cardclient.conf:
cccam2:192.168.178.230:12000:1/09c4/FFFF:Home:12345

 

[legenwaitforitdary]

AW: yaVDR 0.5a SC-Plugin funktioniert nicht... weiß nicht mehr weiter

Nagut, dann liegts für mich nicht an sc, was sagt denn der Server dazu?

 

[nws_basti]

AW: yaVDR 0.5a SC-Plugin funktioniert nicht... weiß nicht mehr weiter

So, SC Plguin funktioniert. Man sollte nicht zwei User gleichzeitig nutzen, auf'n CS. Hab einen neuen User im CS angelegt und nun klappt es auch.

@legenwaitforitdary
Besten Dank für den Hinweis und deiner Hilfe