Vizcam auf Kathrein Ufs922 original firmware

[Biernot78]

AW: Vizcam auf Kathrein Ufs922 original firmware

Es steht da:

02. Im Ortner /mnt/hdd0/media/tools den Ortner oscam kopieren
(oscam_auf_kathrein_912_mit_originalsoftware, hier im board zu finden)

03. in /config/lib das libioctl.so austauschen:

Wo bekomme ich die Dateien her ich finde die hier nicht über die Suche ?

 

[mickey12]

AW: Vizcam auf Kathrein Ufs922 original firmware

wo kann ich das laden die oscam fürs 912

guckst du Link ist nicht mehr aktiv.

 

[spat]

AW: Vizcam auf Kathrein Ufs922 original firmware

Also ich kriege einfach nicht hin mit der oscam.keys und biss

hab schon
so probiert z.B 0001:01F5:10091932362462BC10091932362462BC

und so 0212:0064:0064:0001:10091932362462BC10091932362462BC

ohne erfolg
2011/01/20 17:05:33 29780000 s version=1.00-unstable_svn, build #4249, system=sh4-linux-stapi, nice=0
2011/01/20 17:05:33 29780000 s client max. idle=660 sec, debug level=128
2011/01/20 17:05:33 29780000 s max. logsize=500 Kb
2011/01/20 17:05:33 29780000 s client timeout=6000 ms, fallback timeout=3000 ms, cache delay=10 ms
2011/01/20 17:05:33 29780000 s auth size=4868
2011/01/20 17:05:33 29780000 s services reloaded: 0 services freed, 2 services loaded
2011/01/20 17:05:33 29780000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/01/20 17:05:33 29780000 s signal handling initialized (type=sysv)
2011/01/20 17:05:33 29780000 s can't open file "/mnt/hdd0/media/tools/oscam/oscam.srvid" (err=2), no service-id's loaded
2011/01/20 17:05:33 29780000 s 121 tier-id's loaded
2011/01/20 17:05:33 29780000 s 3 provid's loaded
2011/01/20 17:05:33 29780000 s monitor: disabled
2011/01/20 17:05:33 29780000 s camd33: disabled
2011/01/20 17:05:33 29780000 s camd35: disabled
2011/01/20 17:05:33 29780000 s cs378x: disabled
2011/01/20 17:05:33 29780000 s newcamd: disabled
2011/01/20 17:05:33 29780000 s cccam: disabled
2011/01/20 17:05:33 29780000 s radegast: disabled
2011/01/20 17:05:33 29780000 s http thread started
2011/01/20 17:05:33 29780000 s creating thread for device ServerIP
2011/01/20 17:05:33 29FB44E8 h HTTP Server listening on port 8080
2011/01/20 17:05:33 2A7B44E8 p proxy thread started (thread=2A7B44E8, label=cccam, server=ServerIP)
2011/01/20 17:05:33 2A7B44E8 p cccam invalid port 0 for server ServerIP
2011/01/20 17:05:33 2A7B44E8 p exit with signal 1
2011/01/20 17:05:33 2A7B44E8 p thread 2A7B44E8 ended!
2011/01/20 17:05:33 29780000 s can't read from file /tmp/.oscam/stat
2011/01/20 17:05:33 2AFB44E8 c plain dvbapi-client granted (ufs910, au=auto)
2011/01/20 17:05:33 2AFB44E8 c stapi: stapi prio: ret=3 | s: PTI0 pmt_PTI0.tmp | disable 0
2011/01/20 17:05:33 2AFB44E8 c stapi: stapi prio: ret=3 | s: PTI1 pmt_PTI1.tmp | disable 0
2011/01/20 17:05:33 2AFB44E8 c stapi: stapi prio: ret=3 | s: PTI2 pmt_PTI2.tmp | disable 0
2011/01/20 17:05:33 2AFB44E8 c stapi: stapi prio: ret=3 | s: PTI3 pmt_PTI3.tmp | disable 0
2011/01/20 17:05:33 2AFB44E8 c stapi: stapi prio: ret=3 | s: PTI4 pmt_PTI4.tmp | disable 0
2011/01/20 17:05:33 2AFB44E8 c stapi: prio: ret=2 | p: 1830 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
2011/01/20 17:05:33 2AFB44E8 c stapi: prio: ret=2 | p: 1702 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
2011/01/20 17:05:33 2AFB44E8 c stapi: prio: ret=2 | p: 1833 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
2011/01/20 17:05:33 2AFB44E8 c stapi: prio: ret=2 | i: 0000 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
2011/01/20 17:05:33 2AFB44E8 c stapi: 9 entries read from oscam.dvbapi
2011/01/20 17:05:33 2AFB44E8 c stapi: use alternative ioctls
2011/01/20 17:05:33 2AFB44E8 c stapi: PTI: PTI4 open 0
2011/01/20 17:05:33 2AFB44E8 c stapi: PTI: PTI3 open 1
2011/01/20 17:05:33 2AFB44E8 c stapi: PTI: PTI2 open 2
2011/01/20 17:05:33 2AFB44E8 c stapi: PTI: PTI1 open 3
2011/01/20 17:05:33 2AFB44E8 c stapi: PTI: PTI0 open 4
2011/01/20 17:05:33 2AFB44E8 c stapi: starting read thread stpti device: 0
2011/01/20 17:05:33 2AFB44E8 c stapi: starting read thread stpti device: 1
2011/01/20 17:05:33 2AFB44E8 c stapi: starting read thread stpti device: 2
2011/01/20 17:05:33 2AFB44E8 c stapi: starting read thread stpti device: 3
2011/01/20 17:05:33 2AFB44E8 c stapi: starting read thread stpti device: 4
2011/01/20 17:05:33 2AFB44E8 c stapi: liboscam_stapi v.0.07b initialized
2011/01/20 17:05:34 2AFB44E8 c stapi: found pmt file /tmp/pmt_PTI0.tmp
2011/01/20 17:05:34 2AFB44E8 c pmt:
2011/01/20 17:05:34 2AFB44E8 02 B0 2D 00 01 C1 00 00 E1 F5 F0 11 09 04 26 00
2011/01/20 17:05:34 2AFB44E8 FF FF 05 04 43 55 45 49 0E 03 C0 29 FE 02 E1 F5
2011/01/20 17:05:34 2AFB44E8 F0 05 06 01 02 F0 00 04 E1 F6 F0 00 DC 11 C4 C2
2011/01/20 17:05:34 2AFB44E8 c capmt:
2011/01/20 17:05:34 2AFB44E8 03 00 01 00 00 12 00 09 04 26 00 FF FF 05 04 43
2011/01/20 17:05:34 2AFB44E8 55 45 49 0E 03 C0 29 FE 02 E1 F5 F0 05 06 01 02
2011/01/20 17:05:34 2AFB44E8 F0 00 04 E1 F6 F0 00
2011/01/20 17:05:34 2AFB44E8 c stapi: id: 0 demux_index: 0 ca_mask: 01 program_info_length: 18 ca_pmt_list_management 03
2011/01/20 17:05:34 2AFB44E8 c stapi: [pmt] type: 09 length: 4
2011/01/20 17:05:34 2AFB44E8 c stapi: [ADD PID 0] CAID: 2600 ECM_PID: 1FFF PROVID: 000000
2011/01/20 17:05:34 2AFB44E8 c stapi: [pmt] type: 05 length: 4
2011/01/20 17:05:34 2AFB44E8 c stapi: [pmt] type: 0e length: 3
2011/01/20 17:05:34 2AFB44E8 c stapi: [pmt] stream_type: 02 pid: 01f5 length: 5
2011/01/20 17:05:34 2AFB44E8 c stapi: [pmt] type: 06 length: 1
2011/01/20 17:05:34 2AFB44E8 c stapi: [pmt] type: f0 length: 0
2011/01/20 17:05:34 2AFB44E8 c stapi: [pmt] stream_type: 04 pid: 01f6 length: 0
2011/01/20 17:05:34 2AFB44E8 c stapi: Found 1 ECMpids and 2 STREAMpids in PMT
2011/01/20 17:05:34 2AFB44E8 c stapi: new program number: 0001 (2600:0001 unknown)
2011/01/20 17:05:34 2AFB44E8 c stapi: [IGNORE PID 0] 2600:000000 (file)
2011/01/20 17:05:34 2AFB44E8 c stapi: try pids again #1
2011/01/20 17:05:34 2AFB44E8 c stapi: try pids again #2
2011/01/20 17:05:34 2AFB44E8 c stapi: try pids again #3
2011/01/20 17:05:34 2AFB44E8 c stapi: can't decode channel

 

[Wassi321]

AW: Vizcam auf Kathrein Ufs922 original firmware

Hallo,

ich habe auf meiner Kathi (neuste Serie) mit 2.01 die Prozedur zur Installation von OSCAM durchgeführt. Wenn ich OSCAM starte kommt ein Segmentation fault. Vizcam ist aber nach der Installation gestartet. Hatte aber keine Verbindung zu meinem Server. Habe auch über Original recovery 1.03 alles neu gemacht, leider ohne Erfolg.
Jemand eine Idee?

 

[mickey12]

AW: Vizcam auf Kathrein Ufs922 original firmware

Wenn ich OSCAM starte kommt ein Segmentation fault.

oscam nicht im binärmode übertragen ?
überprüfe die Dateigrösse mit ls -l

dies gilt natürlich auch für die .so und .sh Dateien.

 

[Wassi321]

AW: Vizcam auf Kathrein Ufs922 original firmware

Genau das war es. Danke. Bei den libs hat filezilla das automatisch richtig gemacht, aber bei oscam nicht.

Dann mal sehen ich weiter komme

 

[hometronix]

AW: Vizcam auf Kathrein Ufs922 original firmware

Das Problem hatte ich ja auch anfangs mit FileZilla, die Oscam Datei wird bei der Einstellung "automatisch" nicht binär übertragen.

 

[mickey12]

AW: Vizcam auf Kathrein Ufs922 original firmware

jo, manchmal lohnt es sich auch mal 16 Seiten durchzulesen, dann kann man so manches Problem von vorhnerein ausschliessen

übrigens noch ein Tip zu einem Problem das wir hier auch schon hatten:
wenn man die .sh Dateien im Ascii Mode überträgt, vermeidet man dass CR als Zeilentrenner vorhanden sind, auch wenn man sie mit einem falschen Editor am PC bearbeitet hat.

 

[spat]

AW: Vizcam auf Kathrein Ufs922 original firmware

Was ist bei mir falch mit sharing server connected aber kein decoding

OSCam << cardserver started at Sat Jan 22 12:01:51 2011
-------------------------------------------------------------------------------
2011/01/22 12:01:51 29780000 s version=1.00-unstable_svn, build #4249, system=sh4-linux-stapi, nice=0
2011/01/22 12:01:51 29780000 s client max. idle=660 sec, debug level=128
2011/01/22 12:01:51 29780000 s max. logsize=500 Kb
2011/01/22 12:01:51 29780000 s client timeout=6000 ms, fallback timeout=3000 ms, cache delay=10 ms
2011/01/22 12:01:51 29780000 s auth size=4868
2011/01/22 12:01:51 29780000 s services reloaded: 0 services freed, 2 services loaded
2011/01/22 12:01:51 29780000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/01/22 12:01:51 29780000 s signal handling initialized (type=sysv)
2011/01/22 12:01:51 29780000 s oscam.srvid loading failed, old format
2011/01/22 12:01:51 29780000 s 121 tier-id's loaded
2011/01/22 12:01:51 29780000 s 3 provid's loaded
2011/01/22 12:01:51 29780000 s monitor: disabled
2011/01/22 12:01:51 29780000 s camd33: disabled
2011/01/22 12:01:51 29780000 s camd35: disabled
2011/01/22 12:01:51 29780000 s cs378x: disabled
2011/01/22 12:01:51 29780000 s newcamd: disabled
2011/01/22 12:01:51 29780000 s cccam: disabled
2011/01/22 12:01:51 29780000 s radegast: disabled
2011/01/22 12:01:51 29780000 s http thread started
2011/01/22 12:01:51 29780000 s creating thread for device 188.72.250.28
2011/01/22 12:01:51 29FB44E8 h HTTP Server listening on port 8080
2011/01/22 12:01:51 2A7B44E8 p proxy thread started (thread=2A7B44E8, label=vip, server=188.72.250.28)
2011/01/22 12:01:51 2A7B44E8 p proxy 188.72.250.28:2001 (fd=11)
2011/01/22 12:01:51 29780000 s can't read from file /tmp/.oscam/stat
2011/01/22 12:01:51 2AFB44E8 c plain dvbapi-client granted (anonymous, au(auto)=0)
2011/01/22 12:01:51 2AFB44E8 c stapi: stapi prio: ret=3 | s: PTI0 pmt_PTI0.tmp | disable 0
2011/01/22 12:01:51 2AFB44E8 c stapi: stapi prio: ret=3 | s: PTI1 pmt_PTI1.tmp | disable 0
2011/01/22 12:01:51 2AFB44E8 c stapi: stapi prio: ret=3 | s: PTI2 pmt_PTI2.tmp | disable 0
2011/01/22 12:01:51 2AFB44E8 c stapi: stapi prio: ret=3 | s: PTI3 pmt_PTI3.tmp | disable 0
2011/01/22 12:01:51 2AFB44E8 c stapi: stapi prio: ret=3 | s: PTI4 pmt_PTI4.tmp | disable 0
2011/01/22 12:01:51 2AFB44E8 c stapi: prio: ret=2 | p: 1830 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
2011/01/22 12:01:51 2AFB44E8 c stapi: prio: ret=2 | p: 1702 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
2011/01/22 12:01:51 2AFB44E8 c stapi: prio: ret=2 | p: 1833 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
2011/01/22 12:01:51 2AFB44E8 c stapi: prio: ret=2 | p: 09C4 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
2011/01/22 12:01:51 2AFB44E8 c stapi: prio: ret=2 | i: 0000 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
2011/01/22 12:01:51 2AFB44E8 c stapi: 10 entries read from oscam.dvbapi
2011/01/22 12:01:51 2AFB44E8 c stapi: use alternative ioctls
2011/01/22 12:01:51 2AFB44E8 c stapi: PTI: PTI4 open 0
2011/01/22 12:01:51 2AFB44E8 c stapi: PTI: PTI3 open 1
2011/01/22 12:01:51 2AFB44E8 c stapi: PTI: PTI2 open 2
2011/01/22 12:01:51 2AFB44E8 c stapi: PTI: PTI1 open 3
2011/01/22 12:01:51 2AFB44E8 c stapi: PTI: PTI0 open 4
2011/01/22 12:01:51 2AFB44E8 c stapi: starting read thread stpti device: 0
2011/01/22 12:01:51 2AFB44E8 c stapi: starting read thread stpti device: 1
2011/01/22 12:01:51 2AFB44E8 c stapi: starting read thread stpti device: 2
2011/01/22 12:01:51 2AFB44E8 c stapi: starting read thread stpti device: 3
2011/01/22 12:01:51 2AFB44E8 c stapi: starting read thread stpti device: 4
2011/01/22 12:01:51 2AFB44E8 c stapi: liboscam_stapi v.0.07b initialized
2011/01/22 12:01:52 2AFB44E8 c stapi: found pmt file /tmp/pmt_PTI0.tmp
2011/01/22 12:01:52 2AFB44E8 c pmt:
2011/01/22 12:01:52 2AFB44E8 02 B0 E7 39 D2 C9 00 00 E0 29 F0 0B 05 04 43 55
2011/01/22 12:01:52 2AFB44E8 45 49 0E 03 C0 F4 24 02 E0 29 F0 42 09 0F 05 00
2011/01/22 12:01:52 2AFB44E8 E3 85 10 01 00 13 01 20 14 03 02 2C 00 09 0F 05
2011/01/22 12:01:52 2AFB44E8 00 E3 81 10 01 10 13 01 20 14 03 02 4B 00 09 0F
2011/01/22 12:01:52 2AFB44E8 05 00 E3 99 10 01 00 13 01 20 14 03 04 23 00 09
2011/01/22 12:01:52 2AFB44E8 04 09 AF E3 98 09 04 0B 00 E3 8A 06 01 02 04 E0
2011/01/22 12:01:52 2AFB44E8 2A F0 3F 09 0F 05 00 E3 85 10 01 00 13 01 20 14
2011/01/22 12:01:52 2AFB44E8 03 02 2C 00 09 0F 05 00 E3 81 10 01 10 13 01 20
2011/01/22 12:01:52 2AFB44E8 14 03 02 4B 00 09 0F 05 00 E3 99 10 01 00 13 01
2011/01/22 12:01:52 2AFB44E8 20 14 03 04 23 00 09 04 09 AF E3 98 09 04 0B 00
2011/01/22 12:01:52 2AFB44E8 E3 8A 04 E0 2B F0 3F 09 0F 05 00 E3 85 10 01 00
2011/01/22 12:01:52 2AFB44E8 13 01 20 14 03 02 2C 00 09 0F 05 00 E3 81 10 01
2011/01/22 12:01:52 2AFB44E8 10 13 01 20 14 03 02 4B 00 09 0F 05 00 E3 99 10
2011/01/22 12:01:52 2AFB44E8 01 00 13 01 20 14 03 04 23 00 09 04 09 AF E3 98
2011/01/22 12:01:52 2AFB44E8 09 04 0B 00 E3 8A DA 53 8A 4B
2011/01/22 12:01:52 2AFB44E8 c capmt:
2011/01/22 12:01:52 2AFB44E8 03 39 D2 00 00 0C 00 05 04 43 55 45 49 0E 03 C0
2011/01/22 12:01:52 2AFB44E8 F4 24 02 E0 29 F0 42 09 0F 05 00 E3 85 10 01 00
2011/01/22 12:01:52 2AFB44E8 13 01 20 14 03 02 2C 00 09 0F 05 00 E3 81 10 01
2011/01/22 12:01:52 2AFB44E8 10 13 01 20 14 03 02 4B 00 09 0F 05 00 E3 99 10
2011/01/22 12:01:52 2AFB44E8 01 00 13 01 20 14 03 04 23 00 09 04 09 AF E3 98
2011/01/22 12:01:52 2AFB44E8 09 04 0B 00 E3 8A 06 01 02 04 E0 2A F0 3F 09 0F
2011/01/22 12:01:52 2AFB44E8 05 00 E3 85 10 01 00 13 01 20 14 03 02 2C 00 09
2011/01/22 12:01:52 2AFB44E8 0F 05 00 E3 81 10 01 10 13 01 20 14 03 02 4B 00
2011/01/22 12:01:52 2AFB44E8 09 0F 05 00 E3 99 10 01 00 13 01 20 14 03 04 23
2011/01/22 12:01:52 2AFB44E8 00 09 04 09 AF E3 98 09 04 0B 00 E3 8A 04 E0 2B
2011/01/22 12:01:52 2AFB44E8 F0 3F 09 0F 05 00 E3 85 10 01 00 13 01 20 14 03
2011/01/22 12:01:52 2AFB44E8 02 2C 00 09 0F 05 00 E3 81 10 01 10 13 01 20 14
2011/01/22 12:01:52 2AFB44E8 03 02 4B 00 09 0F 05 00 E3 99 10 01 00 13 01 20
2011/01/22 12:01:52 2AFB44E8 14 03 04 23 00 09 04 09 AF E3 98 09 04 0B 00 E3
2011/01/22 12:01:52 2AFB44E8 8A
2011/01/22 12:01:52 2AFB44E8 c stapi: id: 0 demux_index: 0 ca_mask: 01 program_info_length: 12 ca_pmt_list_management 03
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 05 length: 4
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 0e length: 3
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] stream_type: 02 pid: 0029 length: 66
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 15
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD PID 0] CAID: 0500 ECM_PID: 0385 PROVID: 022C00
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 15
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD PID 1] CAID: 0500 ECM_PID: 0381 PROVID: 024B00
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 15
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD PID 2] CAID: 0500 ECM_PID: 0399 PROVID: 042300
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 4
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD PID 3] CAID: 09AF ECM_PID: 0398 PROVID: 000000
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 4
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD PID 4] CAID: 0B00 ECM_PID: 038A PROVID: 000000
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 06 length: 1
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] stream_type: 04 pid: 002a length: 63
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 15
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD STREAM 0] CAID: 0500 ECM_PID: 0385 PROVID: 022C00
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 15
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD STREAM 1] CAID: 0500 ECM_PID: 0381 PROVID: 024B00
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 15
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD STREAM 2] CAID: 0500 ECM_PID: 0399 PROVID: 042300
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 4
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD STREAM 3] CAID: 09AF ECM_PID: 0398 PROVID: 000000
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 4
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD STREAM 4] CAID: 0B00 ECM_PID: 038A PROVID: 000000
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] stream_type: 04 pid: 002b length: 63
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 15
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD STREAM 0] CAID: 0500 ECM_PID: 0385 PROVID: 022C00
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 15
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD STREAM 1] CAID: 0500 ECM_PID: 0381 PROVID: 024B00
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 15
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD STREAM 2] CAID: 0500 ECM_PID: 0399 PROVID: 042300
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 4
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD STREAM 3] CAID: 09AF ECM_PID: 0398 PROVID: 000000
2011/01/22 12:01:52 2AFB44E8 c stapi: [pmt] type: 09 length: 4
2011/01/22 12:01:52 2AFB44E8 c stapi: [ADD STREAM 4] CAID: 0B00 ECM_PID: 038A PROVID: 000000
2011/01/22 12:01:52 2AFB44E8 c stapi: Found 5 ECMpids and 3 STREAMpids in PMT
2011/01/22 12:01:52 2AFB44E8 c stapi: new program number: 39D2 (0500:39D2 unknown)
2011/01/22 12:01:52 2AFB44E8 c stapi: [IGNORE PID 0] 0500:022C00 (file)
2011/01/22 12:01:52 2AFB44E8 c stapi: [IGNORE PID 1] 0500:024B00 (file)
2011/01/22 12:01:52 2AFB44E8 c stapi: [IGNORE PID 2] 0500:042300 (file)
2011/01/22 12:01:52 2AFB44E8 c stapi: [IGNORE PID 3] 09AF:000000 (file)
2011/01/22 12:01:52 2AFB44E8 c stapi: [IGNORE PID 4] 0B00:000000 (file)
2011/01/22 12:01:52 2AFB44E8 c stapi: try pids again #1
2011/01/22 12:01:52 2AFB44E8 c stapi: try pids again #2
2011/01/22 12:01:52 2AFB44E8 c stapi: try pids again #3
2011/01/22 12:01:52 2AFB44E8 c stapi: can't decode channel

 

[mickey12]

AW: Vizcam auf Kathrein Ufs922 original firmware

2011/01/22 12:01:51 2AFB44E8 c stapi: prio: ret=2 | p: 1830 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
2011/01/22 12:01:51 2AFB44E8 c stapi: prio: ret=2 | p: 1702 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
2011/01/22 12:01:51 2AFB44E8 c stapi: prio: ret=2 | p: 1833 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
2011/01/22 12:01:51 2AFB44E8 c stapi: prio: ret=2 | p: 09C4 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
2011/01/22 12:01:51 2AFB44E8 c stapi: prio: ret=2 | i: 0000 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0

in deinem oscam.dvbapi hast du festgelegt, dass alles andere ausser den caid's 1830,1702,1833 und 09c4 ignoriert wird.

 

[spat]

AW: Vizcam auf Kathrein Ufs922 original firmware

hab es umgeändert kein erfolg
was ist mit oscam srvid datei der schreibt das old ist,


und warum stehen alle cams im log auf disabled

 

[mickey12]

AW: Vizcam auf Kathrein Ufs922 original firmware

das passt schon so, das is nicht der Grund dass nix geht.
Ohne Config Files zu sehen wird man wohl nicht viel sagen können ohne hellseherische Fähigkeiten

 

[spat]

AW: Vizcam auf Kathrein Ufs922 original firmware

Spoiler

########## OScam User #########################################

[account]
User =ufs922
Pwd = box
au = 1
uniq=0
group = 1,2
betatunnel = 1833.FFFF:1702
caid = 1702,1833,1830,09C4,0500
################ OScam.services by Skywalker1 #####################

[hdplus]
caid=1830
srvid=EF10,EF11,EF74,EF75,EF76,277E,EF14,EF15,EF77

[Sky]
caid=1702,1833,09C4
srvid=000A,000B,002B,0029,0009,0014,0204,0008,0203,0019,002a,0010,0024,0017,0032,001d,001b,0022,001c,0013,001a,000e,000d,000c,00a8,0206,0016,0018,0034,0015,003c,003d,0040,4461,4462,003f,003e,3393,0042,2EFE,700A,0044,07FF ,0043,6ff1,7009,3331,3395,0035,0083,007e,0082,0080,007f,0081,0084,007a,007b,007c,00fb,0105,010f,0119,0123,012d,0137,0141,014b,0015,0201,0159,0163,016d,0046,0011,00dd,00de,00fd,014d,0143,0139,012f,0125,011b,0107,0111,016b,0175,00df,0106,0110,2011a,0124,012e,0138,0142,014 c,0156,0160,00fc,000f,0075,0096,0097,0098,0099,009A,009B,009C,0077
######### OScam Server #######################################
[reader]
enable = 1
label = VIP
Protocol = camd35
device = ***********
account = **********
group = 1
fallback = 0
ReconnectTimeout = 10
########## CCcam Server ########################################

[reader]
enable = 0
label = cccam
protocol = cccam
device = *************
account = ************
emmcache = 1,1,2
detect = CD
Group = 1
caid = 0500

########## Newcamd Server ######################################
#[reader]
#enable = 1
#label = hdplus
#Protocol = newcamd
#key = 0102030405060708091011121314
#device = 188.72.250.28,3013
#account = **************
#detect = CD
#emmcache = 1,1,2
#group = 1
#CAID = 1702,1833,1830
#
#[reader]
#enable = 1
#label = skyde
#Protocol = newcamd
#key = 0102030405060708091011121314
#device = 188.72.250.28,3013
#account = *************
#detect = CD
#emmcache = 1,1,2
#group = 2
#CAID = 09C4,1702,1833,1830
#
#[reader]
#label = rtvi
#Protocol = newcamd
#key = 0102030405060708091011121314
#device = 188.72.250.28,2001
#account = ************
#detect = CD
#emmcache = 1,1,2
#group = 1
#CAID = 0500
#
#[reader]
#label = red light hd
#Protocol = newcamd
#key = 0102030405060708091011121314
#device = 188.72.250.28,3016
#account = *******************
#detect = CD
#emmcache = 1,1,2
#group = 1
#CAID = 0628
#
#################################################################

 

[mickey12]

AW: Vizcam auf Kathrein Ufs922 original firmware

du willst also über camd35 protokoll zu einem server connecten.
Bei dem Reader würd ich mal die caid um die es da geht dazuschreiben.
Dann wäre noch der [dvbapi] Block aus oscam.config und das oscam.dvbapi interessant zu sehen.

In deinem letzen Beitrag solltest das ab ########## Newcamd Server besser wieder löschen hier

 

[spat]

AW: Vizcam auf Kathrein Ufs922 original firmware

Spoiler

global]
logfile = /mnt/hdd0/media/tools/oscam/oscam.log
clienttimeout = 6000
fallbacktimeout = 3000
clientmaxidle = 660
cachedelay = 10
bindwait = 60
resolvedelay = 15
nice = 0
maxlogsize = 500
waitforcards = 0

[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 0
monlevel = 2
appendchaninfo = 1

[dvbapi]
enabled = 1
au = 1
#boxtype = ufs922
user = ufs910
pwd = box
pmt_mode = 4

[webif]
httpport = 8080
httprefresh = 30
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0







S: PTI0 pmt_PTI0.tmp
S: PTI1 pmt_PTI1.tmp
S: PTI2 pmt_PTI2.tmp
S: PTI3 pmt_PTI3.tmp
S: PTI4 pmt_PTI4.tmp
P: 1830
P: 1702
P: 1833
P: 09C4
P: 0500
I: 0