V14 in smargo an 7390

[Qiuone]

Hallo zusammen,

ich benötige dringend eure Hilfe.

Plötzlich wird meine V14 nicht mehr erkannt.

Sie lief bis jetzt einwandfrei aber seit ein paar Tagen kommt nur noch folgender log

Spoiler

• 2016/05/29 00:45:54 60447109 r (reader) V14 [mouse] ATR: 3F FD 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50
• 2016/05/29 00:45:54 60447109 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75248
• 2016/05/29 00:45:55 60447109 r (reader) V14 [mouse] Warning: D=0 is invalid, forcing D=1
• 2016/05/29 00:45:55 60447109 r (reader) V14 [mouse] Init card protocol T5, FI=3, F=744, D=1, N=19
• 2016/05/29 00:45:55 60447109 r (reader) V14 [mouse] Setting baudrate to 4800 bps
• 2016/05/29 00:45:55 60447109 r (reader) V14 [mouse] Calculated work ETU is 208.40 us reader mhz = 357
• 2016/05/29 00:45:55 60447109 r (reader) V14 [mouse] ERROR: Parse_ATR returned error
• 2016/05/29 00:45:55 60447109 r (reader) V14 [mouse] Error activating card.
• 2016/05/29 00:45:56 60447109 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75285
• 2016/05/29 00:45:57 60447109 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75232
• 2016/05/29 00:45:58 60447109 r (reader) V14 [mouse] ATR: 3F FD 13 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00
• 2016/05/29 00:45:58 60447109 r (reader) V14 [mouse] Init card protocol T5, FI=1, F=372, D=4, N=253
• 2016/05/29 00:45:58 60447109 r (reader) V14 [mouse] Setting baudrate to 38400 bps
• 2016/05/29 00:45:58 60447109 r (reader) V14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
• 2016/05/29 00:45:58 60447109 r (reader) V14 [mouse] ERROR: Parse_ATR returned error
• 2016/05/29 00:45:58 60447109 r (reader) V14 [mouse] Error activating card.
• 2016/05/29 00:45:59 60447109 r (reader) V14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2016/05/29 00:45:59 60447109 r (reader) V14 [mouse] card initializing error

Mein Reader sieht wie folgt aus

Spoiler

[reader]
label = V14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 13
detect = cd
mhz = 450
group = 1
emmcache = 1,1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
saveemm-u = 1
saveemm-g = 1
ndsversion = 2

Wie gesagt es lief alles einwandfrei. Nun lässt sich nichtmal mehr der Payload auslesen geschweige denn ein EMM schreiben.

Danke für eure Hilfe.

 

[axel]

AW: V14 in smargo an 7390

Hi,

hier weiterlesen: https://www.digital-eliteboard.com/...aktuellen-sky-quot-nderung-quot-teil-5-a.html

CLOSED

 

[tulpenknicker]

AW: V14 in smargo an 7390

Und vorher die oscam updaten