V13 wird nicht initialisiert

[NoonX]

Hallo,

meine v13 Karte will einfach nicht initialisiert werden.

Habe die Karte im Smargo direkt an einem Debian7 Thin Client (x64)+IPC angeschloßen.
CCCam lief ewig und drei Tage und läuft auch immer noch.

Reader wird erkannt, Karte wird auch erkannt, kann aber nicht initialisiert werden.

Habe schon mehrere Revisionsnummern getestet, andere USB Ports, immer mit dem gleichem Ergebnis.

Aktuell hab ich die Revisionsnummer 9668 vom 21.4. drauf.

LiveLog

Spoiler

• 2014/04/22 12:30:56 925890 r smargo [mouse] card detected
• 2014/04/22 12:30:57 925890 r smargo [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
• 2014/04/22 12:30:57 925890 r smargo [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
• 2014/04/22 12:30:57 925890 r smargo [mouse] Setting baudrate to 9600 bps
• 2014/04/22 12:30:57 925890 r smargo [mouse] Calculated work ETU is 104.20 us reader mhz = 357
• 2014/04/22 12:30:57 925890 r smargo [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2014/04/22 12:30:59 925890 r smargo [mouse] Card type: P1TV
• 2014/04/22 12:30:59 925890 r smargo [mouse] Rom version: 10A7
• 2014/04/22 12:30:59 925890 r smargo [mouse] Unable to get smartcard credit
• 2014/04/22 12:30:59 925890 r smargo [mouse] no boxID available
• 2014/04/22 12:30:59 925890 r smargo [mouse] card system not supported
• 2014/04/22 12:30:59 925890 r smargo [mouse] Normal mode failed, reverting to Deprecated Mode
• 2014/04/22 12:31:02 925890 r smargo [mouse] ATR: 3F FF 11 25 03 10 80 41 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50
• 2014/04/22 12:31:02 925890 r smargo [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
• 2014/04/22 12:31:02 925890 r smargo [mouse] Calculated work ETU is 104.20 us reader mhz = 357
• 2014/04/22 12:31:02 925890 r smargo [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2014/04/22 12:31:03 925890 r smargo [mouse] card system not supported
• 2014/04/22 12:31:03 925890 r smargo [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/04/22 12:31:03 925890 r smargo [mouse] card initializing error

OSCAM CONF

Spoiler

[global]
disablelog = 0
loghistorysize = 4096
serverip = (meineServerIP)
logfile = /var/log/ipc/OScam.log
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
fallbacktimeout_percaid =
clientmaxidle = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = 0
maxlogsize = 20
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 1
block_same_name = 1
usrfile =
mailfile =
cwlogdir =
emmlogdir =
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
lb_retrylimit = 800
lb_stat_cleanup = 336
lb_max_readers = 0
lb_auto_betatunnel = 1
lb_auto_betatunnel_mode = 0
lb_auto_betatunnel_prefer_beta= 50
lb_savepath =
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_auto_timeout = 0
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300
double_check_caid =
ecmfmt =
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
double_check = 0

[cache]
delay = 0
max_time = 15
max_hit_time = 15
wait_time =
cacheexenablestats = 0
csp_port = 0
csp_serverip = 0.0.0.0
csp_ecm_filter =
csp_allow_request = 1
csp_allow_reforward = 0
cacheex_cw_check =
wait_until_ctimeout = 0
cwcycle_check_enable = 0
cwcycle_check_caid =
cwcycle_maxlist = 500
cwcycle_keeptime = 15
cwcycle_onbad = 1
cwcycle_dropold = 1
cwcycle_sensitive = 4
cwcycle_allowbadfromffb = 0
cwcycle_usecwcfromce = 0

[cccam]
port = 12000
serverip = (meineServerIP)
nodeid = C2295291109214A4
version = 2.1.4
reshare = 10
reshare_mode = 0
ignorereshare = 0
forward_origin_card = 0
stealth = 0
updateinterval = 240
minimizecards = 0
keepconnected = 1
recv_timeout = 2000

OSCAM SERVER

Spoiler

[reader]
label = smargo
description = v13
enable = 1
protocol = mouse
device = /dev/ttyUSB0
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 1
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
caid =
atr =
boxid =
boxkey =
rsakey =
ins7e =
ins7e11 =
ins2e06 =
fix9993 = 0
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 357
cardmhz = 357
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 0,0,0
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0

Findet jemand den Fehler?
Vielen Dank im voraus.

 

[Tec-Hi]

AW: V13 wird nicht initialisiert

Hi

in Datei oscam.server fehlt:

boxid = 12345678 und auch gleich
ins7e11 = 15

HF

 

[dodo83]

AW: V13 wird nicht initialisiert

• 2014/04/22 12:30:59 925890 r smargo [mouse] no boxID available

musst du eintragen

[COLOR=#333333]boxid = 12345678[/COLOR]

oscam neu starten

PS
den Smargo kannst du besser über das Smartreader protokol einbinden per Serial

 

[NoonX]

AW: V13 wird nicht initialisiert

Alle drei Ratschläge zu Herzen genommen und umgesetzt.
Jetzt läufts! :emoticon-0148-yes:

Vielen Dank für die schnellen und helfenden Antworten!
:drinks: