Guten Tag an alle im Forum,
folgende Situation ich habe einen Pungulux Plus mit Evolux drauf und benutze das Netriono Image.
Soweit so gut. Habe ihn in meinem Heim netz als client zum laufen bekommen kein Problem.
Dann habe ich versucht meine S02 Karte dierkt im Pingulux zum laufen zu bekommen auch kein problem.
Nun folgendes Problem ein freund möchte auch einen Pingulux haben der hat allerdings ne V13 Karte und ich schaffe es nicht sie zum Laufen zu bekommen zweifel langsam an meinem eigenem Verstand. Hier mal meine Oscam Files würde mich sehr freuen wenn mal jemand drüber schauen könnte und mir sagen kann was ich falsch mache sind schon die geändertenFiles für V13.
edit by extra: verspoilert
folgende Situation ich habe einen Pungulux Plus mit Evolux drauf und benutze das Netriono Image.
Soweit so gut. Habe ihn in meinem Heim netz als client zum laufen bekommen kein Problem.
Dann habe ich versucht meine S02 Karte dierkt im Pingulux zum laufen zu bekommen auch kein problem.
Nun folgendes Problem ein freund möchte auch einen Pingulux haben der hat allerdings ne V13 Karte und ich schaffe es nicht sie zum Laufen zu bekommen zweifel langsam an meinem eigenem Verstand. Hier mal meine Oscam Files würde mich sehr freuen wenn mal jemand drüber schauen könnte und mir sagen kann was ich falsch mache sind schon die geändertenFiles für V13.
Oscam.config
#
# main configuration
#
[global]
nice = -1
WaitForCards = 1
saveinithistory = 1
lb_mode = 2
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 3
lb_min_ecmcount = 5
lb_reopen_seconds = 200
# logging
logfile = stdout
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw
# monitor
[monitor]
port = 9999
aulow = 120
monlevel = 1
# Web Interface
[webif]
httpport = 8888
httpuser = alien
httppwd = alien
httprefresh = 0
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254
[dvbapi]
enabled = 1
user = alien
priority = 09C4
Oscam.server
Oscam.server
# this is an example of how to connect a CCcam server
# this line acts as a cccam 2.0.11 client ( recomended )
#
[reader]
label = cccam_server
enable = 1
protocol = cccam
device = ###.###..24,12000
account = Mark
password = ####
cccversion = 2.2.2
cccmaxhops = 2
group = 1
#
# this is an example how to connect to a NewCamd server
#
# [reader]
# label = newcamd_server
# protocol = newcamd
# key = edit by extra: key entfernt
# device = myserver.dyndns.tv,66666
# account = login1,password1
# group = 1
#
# this is an example how to "read" a na*ra card ( e.g. HD+ )
#
#
# [reader]
# Label = HD plus
# Protocol = internal
# Device = sci0
# detect = CD
# EMMCache = 1,1,2
# group = 1
# CAID = 1830
# n3_rsakey = edit by extra: key entfernt
# n3_boxkey = edit by extra: key entfernt
#
#
# this is an example how to "read" a nagra card ( Sky )
# the same rule apply to a Conax card replacing CAID with 0B02 ( Focus )
#
#
[reader]
Label = Sk V13
Protocol = internal
Device = /dev/sci0
detect = CD
mhz = 357
cardmhz = 357
EMMCache = 1,1,2
group = 1
CAID = 09C4
#
#
# this is an example how to "read" a N*S card ( Dolce )
#
#
# [reader]
# Label = Dolce
# Protocol = internal
# Device = sci0
# detect = CD
# group = 1
# emmcache = 1,1,2
# caid = 092f
# boxid = 12345678
Oscam.user
Oscam.user
#
# This is local user account
#
[account]
user = alien
pwd = amiko
group = 1
chid = 0604:000014,000069,0000F4,0000F5,0000FA
keepalive = 1
services = hdplus,skyde
#
# main configuration
#
[global]
nice = -1
WaitForCards = 1
saveinithistory = 1
lb_mode = 2
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 3
lb_min_ecmcount = 5
lb_reopen_seconds = 200
# logging
logfile = stdout
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw
# monitor
[monitor]
port = 9999
aulow = 120
monlevel = 1
# Web Interface
[webif]
httpport = 8888
httpuser = alien
httppwd = alien
httprefresh = 0
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254
[dvbapi]
enabled = 1
user = alien
priority = 09C4
Oscam.server
Oscam.server
# this is an example of how to connect a CCcam server
# this line acts as a cccam 2.0.11 client ( recomended )
#
[reader]
label = cccam_server
enable = 1
protocol = cccam
device = ###.###..24,12000
account = Mark
password = ####
cccversion = 2.2.2
cccmaxhops = 2
group = 1
#
# this is an example how to connect to a NewCamd server
#
# [reader]
# label = newcamd_server
# protocol = newcamd
# key = edit by extra: key entfernt
# device = myserver.dyndns.tv,66666
# account = login1,password1
# group = 1
#
# this is an example how to "read" a na*ra card ( e.g. HD+ )
#
#
# [reader]
# Label = HD plus
# Protocol = internal
# Device = sci0
# detect = CD
# EMMCache = 1,1,2
# group = 1
# CAID = 1830
# n3_rsakey = edit by extra: key entfernt
# n3_boxkey = edit by extra: key entfernt
#
#
# this is an example how to "read" a nagra card ( Sky )
# the same rule apply to a Conax card replacing CAID with 0B02 ( Focus )
#
#
[reader]
Label = Sk V13
Protocol = internal
Device = /dev/sci0
detect = CD
mhz = 357
cardmhz = 357
EMMCache = 1,1,2
group = 1
CAID = 09C4
#
#
# this is an example how to "read" a N*S card ( Dolce )
#
#
# [reader]
# Label = Dolce
# Protocol = internal
# Device = sci0
# detect = CD
# group = 1
# emmcache = 1,1,2
# caid = 092f
# boxid = 12345678
Oscam.user
Oscam.user
#
# This is local user account
#
[account]
user = alien
pwd = amiko
group = 1
chid = 0604:000014,000069,0000F4,0000F5,0000FA
keepalive = 1
services = hdplus,skyde
edit by extra: verspoilert
Zuletzt bearbeitet von einem Moderator: