/var/log/syslog:
Oct 5 14:01:45 server2 kernel: imklog 4.6.4, log source = /proc/kmsg started.
Oct 5 14:01:45 server2 rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="978" x-info="http://www.rsyslog.com"] (re)start
Oct 5 14:01:45 server2 kernel: [ 0.000000] Initializing cgroup subsys cpuset
Oct 5 14:01:45 server2 kernel: [ 0.000000] Initializing cgroup subsys cpu
Oct 5 14:01:45 server2 kernel: [ 0.000000] Linux version 2.6.32-5-486 (Debian 2.6.32-48squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Mon Feb 25 00:22:26 UTC 2013
Oct 5 14:01:45 server2 kernel: [ 0.000000] KERNEL supported cpus:
Oct 5 14:01:45 server2 kernel: [ 0.000000] Intel GenuineIntel
Oct 5 14:01:45 server2 kernel: [ 0.000000] AMD AuthenticAMD
Oct 5 14:01:45 server2 kernel: [ 0.000000] NSC Geode by NSC
Oct 5 14:01:45 server2 kernel: [ 0.000000] Cyrix CyrixInstead
Oct 5 14:01:45 server2 kernel: [ 0.000000] Centaur CentaurHauls
Oct 5 14:01:45 server2 kernel: [ 0.000000] Transmeta GenuineTMx86
Oct 5 14:01:45 server2 kernel: [ 0.000000] Transmeta TransmetaCPU
Oct 5 14:01:45 server2 kernel: [ 0.000000] UMC UMC UMC UMC
Oct 5 14:01:45 server2 kernel: [ 0.000000] BIOS-provided physical RAM map:
Oct 5 14:01:45 server2 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Oct 5 14:01:45 server2 kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Oct 5 14:01:45 server2 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 5 14:01:45 server2 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003eee0000 (usable)
Oct 5 14:01:45 server2 kernel: [ 0.000000] BIOS-e820: 000000003eee0000 - 000000003eee3000 (ACPI NVS)
Oct 5 14:01:45 server2 kernel: [ 0.000000] BIOS-e820: 000000003eee3000 - 000000003eef0000 (ACPI data)
Oct 5 14:01:45 server2 kernel: [ 0.000000] BIOS-e820: 000000003eef0000 - 000000003ef00000 (reserved)
Oct 5 14:01:45 server2 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Oct 5 14:01:45 server2 kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 5 14:01:45 server2 kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Oct 5 14:01:45 server2 kernel: [ 0.000000] DMI 2.3 present.
Oct 5 14:01:45 server2 kernel: [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
Oct 5 14:01:45 server2 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Oct 5 14:01:45 server2 kernel: [ 0.000000] last_pfn = 0x3eee0 max_arch_pfn = 0x100000
Oct 5 14:01:45 server2 kernel: [ 0.000000] MTRR default type: uncachable
Oct 5 14:01:45 server2 kernel: [ 0.000000] MTRR fixed ranges enabled:
Oct 5 14:01:45 server2 kernel: [ 0.000000] 00000-9FFFF write-back
Oct 5 14:01:45 server2 kernel: [ 0.000000] A0000-BFFFF uncachable
Oct 5 14:01:45 server2 kernel: [ 0.000000] C0000-CEFFF write-protect
Oct 5 14:01:45 server2 kernel: [ 0.000000] CF000-EFFFF uncachable
Oct 5 14:01:45 server2 kernel: [ 0.000000] F0000-F7FFF write-through
Oct 5 14:01:45 server2 kernel: [ 0.000000] F8000-F8FFF uncachable
Oct 5 14:01:45 server2 kernel: [ 0.000000] F9000-FFFFF write-through
Oct 5 14:01:45 server2 kernel: [ 0.000000] MTRR variable ranges enabled:
Oct 5 14:01:45 server2 kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back
Oct 5 14:01:45 server2 kernel: [ 0.000000] 1 base 03F000000 mask FFF000000 uncachable
Oct 5 14:01:45 server2 kernel: [ 0.000000] 2 base 0E8000000 mask FF8000000 write-combining
Oct 5 14:01:45 server2 kernel: [ 0.000000] 3 base 03EF00000 mask FFFF00000 uncachable
Oct 5 14:01:45 server2 kernel: [ 0.000000] 4 disabled
Oct 5 14:01:45 server2 kernel: [ 0.000000] 5 disabled
Oct 5 14:01:45 server2 kernel: [ 0.000000] 6 disabled
Oct 5 14:01:45 server2 kernel: [ 0.000000] 7 disabled
Oct 5 14:01:45 server2 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 5 14:01:45 server2 kernel: [ 0.000000] initial memory mapped : 0 - 01800000
Oct 5 14:01:45 server2 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Oct 5 14:01:45 server2 kernel: [ 0.000000] 0000000000 - 0000400000 page 4k
Oct 5 14:01:45 server2 kernel: [ 0.000000] 0000400000 - 0037400000 page 2M
Oct 5 14:01:45 server2 kernel: [ 0.000000] 0037400000 - 00377fe000 page 4k
Oct 5 14:01:45 server2 kernel: [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
Oct 5 14:01:45 server2 kernel: [ 0.000000] RAMDISK: 2eb14000 - 2f3675ff
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: RSDP 000f7590 00014 (v00 CN700 )
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: RSDT 3eee3000 0002C (v01 CN700 AWRDACPI 42302E31 AWRD 00000000)
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: FACP 3eee3080 00074 (v01 CN700 AWRDACPI 42302E31 AWRD 00000000)
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: DSDT 3eee3100 05483 (v01 CN700 AWRDACPI 00001000 MSFT 03000000)
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: FACS 3eee0000 00040
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: APIC 3eee85c0 0005A (v01 CN700 AWRDACPI 42302E31 AWRD 00000000)
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Oct 5 14:01:45 server2 kernel: [ 0.000000] 118MB HIGHMEM available.
Oct 5 14:01:45 server2 kernel: [ 0.000000] 887MB LOWMEM available.
Oct 5 14:01:45 server2 kernel: [ 0.000000] mapped low ram: 0 - 377fe000
Oct 5 14:01:45 server2 kernel: [ 0.000000] low ram: 0 - 377fe000
Oct 5 14:01:45 server2 kernel: [ 0.000000] node 0 low ram: 00000000 - 377fe000
Oct 5 14:01:45 server2 kernel: [ 0.000000] node 0 bootmap 00011000 - 00017f00
Oct 5 14:01:45 server2 kernel: [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00377fe000]
Oct 5 14:01:45 server2 kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Oct 5 14:01:45 server2 kernel: [ 0.000000] #1 [0001000000 - 0001455a80] TEXT DATA BSS ==> [0001000000 - 0001455a80]
Oct 5 14:01:45 server2 kernel: [ 0.000000] #2 [002eb14000 - 002f3675ff] RAMDISK ==> [002eb14000 - 002f3675ff]
Oct 5 14:01:45 server2 kernel: [ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
Oct 5 14:01:45 server2 kernel: [ 0.000000] #4 [0001456000 - 000145c06a] BRK ==> [0001456000 - 000145c06a]
Oct 5 14:01:45 server2 kernel: [ 0.000000] #5 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
Oct 5 14:01:45 server2 kernel: [ 0.000000] #6 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
Oct 5 14:01:45 server2 kernel: [ 0.000000] found SMP MP-table at [c00f33a0] f33a0
Oct 5 14:01:45 server2 kernel: [ 0.000000] Zone PFN ranges:
Oct 5 14:01:45 server2 kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
Oct 5 14:01:45 server2 kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe
Oct 5 14:01:45 server2 kernel: [ 0.000000] HighMem 0x000377fe -> 0x0003eee0
Oct 5 14:01:45 server2 kernel: [ 0.000000] Movable zone start PFN for each node
Oct 5 14:01:45 server2 kernel: [ 0.000000] early_node_map[2] active PFN ranges
Oct 5 14:01:45 server2 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Oct 5 14:01:45 server2 kernel: [ 0.000000] 0: 0x00000100 -> 0x0003eee0
Oct 5 14:01:45 server2 kernel: [ 0.000000] On node 0 totalpages: 257647
Oct 5 14:01:45 server2 kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1362cc4, node_mem_map c145e200
Oct 5 14:01:45 server2 kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Oct 5 14:01:45 server2 kernel: [ 0.000000] DMA zone: 0 pages reserved
Oct 5 14:01:45 server2 kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
Oct 5 14:01:45 server2 kernel: [ 0.000000] Normal zone: 1744 pages used for memmap
Oct 5 14:01:45 server2 kernel: [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
Oct 5 14:01:45 server2 kernel: [ 0.000000] HighMem zone: 238 pages used for memmap
Oct 5 14:01:45 server2 kernel: [ 0.000000] HighMem zone: 30196 pages, LIFO batch:7
Oct 5 14:01:45 server2 kernel: [ 0.000000] Using APIC driver default
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 5 14:01:45 server2 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: IRQ0 used by override.
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: IRQ2 used by override.
Oct 5 14:01:45 server2 kernel: [ 0.000000] ACPI: IRQ9 used by override.
Oct 5 14:01:45 server2 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Oct 5 14:01:45 server2 kernel: [ 0.000000] nr_irqs_gsi: 24
Oct 5 14:01:45 server2 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Oct 5 14:01:45 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Oct 5 14:01:45 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Oct 5 14:01:45 server2 kernel: [ 0.000000] Allocating PCI resources starting at 3ef00000 (gap: 3ef00000:bfd00000)
Oct 5 14:01:45 server2 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Oct 5 14:01:45 server2 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255633
Oct 5 14:01:45 server2 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-486 root=UUID=b51d75b9-a1d2-41e8-aeff-1b129eb67a07 ro quiet
Oct 5 14:01:45 server2 kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Oct 5 14:01:45 server2 kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 5 14:01:45 server2 kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 5 14:01:45 server2 kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Oct 5 14:01:45 server2 kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Oct 5 14:01:45 server2 kernel: [ 0.000000] Initializing CPU#0
Oct 5 14:01:45 server2 kernel: [ 0.000000] Initializing HighMem for node 0 (000377fe:0003eee0)
Oct 5 14:01:45 server2 kernel: [ 0.000000] Memory: 1008144k/1031040k available (2344k kernel code, 21880k reserved, 1150k data, 444k init, 121736k highmem)
Oct 5 14:01:45 server2 kernel: [ 0.000000] virtual kernel memory layout:
Oct 5 14:01:45 server2 kernel: [ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
Oct 5 14:01:45 server2 kernel: [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Oct 5 14:01:45 server2 kernel: [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
Oct 5 14:01:45 server2 kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
Oct 5 14:01:45 server2 kernel: [ 0.000000] .init : 0xc136a000 - 0xc13d9000 ( 444 kB)
Oct 5 14:01:45 server2 kernel: [ 0.000000] .data : 0xc124a1fd - 0xc1369d04 (1150 kB)
Oct 5 14:01:45 server2 kernel: [ 0.000000] .text : 0xc1000000 - 0xc124a1fd (2344 kB)
Oct 5 14:01:45 server2 kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Oct 5 14:01:45 server2 kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Oct 5 14:01:45 server2 kernel: [ 0.000000] Hierarchical RCU implementation.
Oct 5 14:01:45 server2 kernel: [ 0.000000] NR_IRQS:288
Oct 5 14:01:45 server2 kernel: [ 0.000000] Console: colour VGA+ 80x25
Oct 5 14:01:45 server2 kernel: [ 0.000000] console [tty0] enabled
Oct 5 14:01:45 server2 kernel: [ 0.000000] Fast TSC calibration using PIT
Oct 5 14:01:45 server2 kernel: [ 0.000000] Detected 1197.147 MHz processor.
Oct 5 14:01:45 server2 kernel: [ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2394.29 BogoMIPS (lpj=4788588)
Oct 5 14:01:45 server2 kernel: [ 0.008038] Security Framework initialized
Oct 5 14:01:45 server2 kernel: [ 0.008048] SELinux: Disabled at boot.
Oct 5 14:01:45 server2 kernel: [ 0.008061] Mount-cache hash table entries: 512
Oct 5 14:01:45 server2 kernel: [ 0.008226] Initializing cgroup subsys ns
Oct 5 14:01:45 server2 kernel: [ 0.008234] Initializing cgroup subsys cpuacct
Oct 5 14:01:45 server2 kernel: [ 0.008240] Initializing cgroup subsys devices
Oct 5 14:01:45 server2 kernel: [ 0.008246] Initializing cgroup subsys freezer
Oct 5 14:01:45 server2 kernel: [ 0.008252] Initializing cgroup subsys net_cls
Oct 5 14:01:45 server2 kernel: [ 0.008286] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 5 14:01:45 server2 kernel: [ 0.008293] CPU: L2 Cache: 128K (64 bytes/line)
Oct 5 14:01:45 server2 kernel: [ 0.008309] CPU: Centaur VIA C7-M Processor 1200MHz stepping 00
Oct 5 14:01:45 server2 kernel: [ 0.008322] Checking 'hlt' instruction... OK.
Oct 5 14:01:45 server2 kernel: [ 0.026667] ACPI: Core revision 20090903
Oct 5 14:01:45 server2 kernel: [ 0.036278] Enabling APIC mode: Flat. Using 1 I/O APICs
Oct 5 14:01:45 server2 kernel: [ 0.037398] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 5 14:01:45 server2 kernel: [ 0.080001] devtmpfs: initialized
Oct 5 14:01:45 server2 kernel: [ 0.080001] regulator: core version 0.5
Oct 5 14:01:45 server2 kernel: [ 0.080001] NET: Registered protocol family 16
Oct 5 14:01:45 server2 kernel: [ 0.080001] EISA bus registered
Oct 5 14:01:45 server2 kernel: [ 0.080001] ACPI: bus type pci registered
Oct 5 14:01:45 server2 kernel: [ 0.080001] PCI: PCI BIOS revision 2.10 entry at 0xf9310, last bus=1
Oct 5 14:01:45 server2 kernel: [ 0.080001] PCI: Using configuration type 1 for base access
Oct 5 14:01:45 server2 kernel: [ 0.080001] bio: create slab at 0
Oct 5 14:01:45 server2 kernel: [ 0.080192] ACPI: EC: Look up EC in DSDT
Oct 5 14:01:45 server2 kernel: [ 0.093944] ACPI: Interpreter enabled
Oct 5 14:01:45 server2 kernel: [ 0.093953] ACPI: (supports S0 S1 S4 S5)
Oct 5 14:01:45 server2 kernel: [ 0.094010] ACPI: Using IOAPIC for interrupt routing
Oct 5 14:01:45 server2 kernel: [ 0.107817] ACPI: No dock devices found.
Oct 5 14:01:45 server2 kernel: [ 0.108107] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 5 14:01:45 server2 kernel: [ 0.108192] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
Oct 5 14:01:45 server2 kernel: [ 0.108577] pci 0000:00:01.0: supports D1
Oct 5 14:01:45 server2 kernel: [ 0.108634] pci 0000:00:09.0: reg 10 io port: [0xf200-0xf2ff]
Oct 5 14:01:45 server2 kernel: [ 0.108648] pci 0000:00:09.0: reg 14 32bit mmio: [0xfdfff000-0xfdfff0ff]
Oct 5 14:01:45 server2 kernel: [ 0.108680] pci 0000:00:09.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
Oct 5 14:01:45 server2 kernel: [ 0.108714] pci 0000:00:09.0: supports D1 D2
Oct 5 14:01:45 server2 kernel: [ 0.108722] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold
Oct 5 14:01:45 server2 kernel: [ 0.108731] pci 0000:00:09.0: PME# disabled
Oct 5 14:01:45 server2 kernel: [ 0.108783] pci 0000:00:0f.0: reg 10 io port: [0xff00-0xff07]
Oct 5 14:01:45 server2 kernel: [ 0.108796] pci 0000:00:0f.0: reg 14 io port: [0xfe00-0xfe03]
Oct 5 14:01:45 server2 kernel: [ 0.108810] pci 0000:00:0f.0: reg 18 io port: [0xfd00-0xfd07]
Oct 5 14:01:45 server2 kernel: [ 0.108823] pci 0000:00:0f.0: reg 1c io port: [0xfc00-0xfc03]
Oct 5 14:01:45 server2 kernel: [ 0.108836] pci 0000:00:0f.0: reg 20 io port: [0xfb00-0xfb0f]
Oct 5 14:01:45 server2 kernel: [ 0.108850] pci 0000:00:0f.0: reg 24 io port: [0xf400-0xf4ff]
Oct 5 14:01:45 server2 kernel: [ 0.108948] pci 0000:00:0f.1: reg 20 io port: [0xfa00-0xfa0f]
Oct 5 14:01:45 server2 kernel: [ 0.109058] pci 0000:00:10.0: reg 20 io port: [0xf900-0xf91f]
Oct 5 14:01:45 server2 kernel: [ 0.109101] pci 0000:00:10.0: supports D1 D2
Oct 5 14:01:45 server2 kernel: [ 0.109108] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
Oct 5 14:01:45 server2 kernel: [ 0.109118] pci 0000:00:10.0: PME# disabled
Oct 5 14:01:45 server2 kernel: [ 0.109179] pci 0000:00:10.1: reg 20 io port: [0xf800-0xf81f]
Oct 5 14:01:45 server2 kernel: [ 0.109222] pci 0000:00:10.1: supports D1 D2
Oct 5 14:01:45 server2 kernel: [ 0.109230] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
Oct 5 14:01:45 server2 kernel: [ 0.109239] pci 0000:00:10.1: PME# disabled
Oct 5 14:01:45 server2 kernel: [ 0.109300] pci 0000:00:10.2: reg 20 io port: [0xf700-0xf71f]
Oct 5 14:01:45 server2 kernel: [ 0.109343] pci 0000:00:10.2: supports D1 D2
Oct 5 14:01:45 server2 kernel: [ 0.109350] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
Oct 5 14:01:45 server2 kernel: [ 0.109359] pci 0000:00:10.2: PME# disabled
Oct 5 14:01:45 server2 kernel: [ 0.109421] pci 0000:00:10.3: reg 20 io port: [0xf600-0xf61f]
Oct 5 14:01:45 server2 kernel: [ 0.109464] pci 0000:00:10.3: supports D1 D2
Oct 5 14:01:45 server2 kernel: [ 0.109471] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
Oct 5 14:01:45 server2 kernel: [ 0.109480] pci 0000:00:10.3: PME# disabled
Oct 5 14:01:45 server2 kernel: [ 0.109524] pci 0000:00:10.4: reg 10 32bit mmio: [0xfdffe000-0xfdffe0ff]
Oct 5 14:01:45 server2 kernel: [ 0.109586] pci 0000:00:10.4: supports D1 D2
Oct 5 14:01:45 server2 kernel: [ 0.109593] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
Oct 5 14:01:45 server2 kernel: [ 0.109602] pci 0000:00:10.4: PME# disabled
Oct 5 14:01:45 server2 kernel: [ 0.109681] HPET not enabled in BIOS. You might try hpet=force boot option
Oct 5 14:01:45 server2 kernel: [ 0.109761] pci 0000:00:11.5: reg 10 io port: [0xf000-0xf0ff]
Oct 5 14:01:45 server2 kernel: [ 0.109825] pci 0000:00:11.5: supports D1 D2
Oct 5 14:01:45 server2 kernel: [ 0.109899] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf4000000-0xf7ffffff]
Oct 5 14:01:45 server2 kernel: [ 0.109913] pci 0000:01:00.0: reg 14 32bit mmio: [0xfb000000-0xfbffffff]
Oct 5 14:01:45 server2 kernel: [ 0.109939] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
Oct 5 14:01:45 server2 kernel: [ 0.109974] pci 0000:01:00.0: supports D1 D2
Oct 5 14:01:45 server2 kernel: [ 0.110025] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
Oct 5 14:01:45 server2 kernel: [ 0.110035] pci 0000:00:01.0: bridge 32bit mmio: [0xfb000000-0xfcffffff]
Oct 5 14:01:45 server2 kernel: [ 0.110046] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf4000000-0xf7ffffff]
Oct 5 14:01:45 server2 kernel: [ 0.110061] pci_bus 0000:00: on NUMA node 0
Oct 5 14:01:45 server2 kernel: [ 0.110073] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 5 14:01:45 server2 kernel: [ 0.204206] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
Oct 5 14:01:45 server2 kernel: [ 0.204561] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
Oct 5 14:01:45 server2 kernel: [ 0.204924] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
Oct 5 14:01:45 server2 kernel: [ 0.205239] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 5 14:01:45 server2 kernel: [ 0.205544] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 5 14:01:45 server2 kernel: [ 0.205834] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 5 14:01:45 server2 kernel: [ 0.206124] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 5 14:01:45 server2 kernel: [ 0.206413] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 5 14:01:45 server2 kernel: [ 0.206796] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
Oct 5 14:01:45 server2 kernel: [ 0.207153] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
Oct 5 14:01:45 server2 kernel: [ 0.207508] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
Oct 5 14:01:45 server2 kernel: [ 0.207934] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
Oct 5 14:01:45 server2 kernel: [ 0.208153] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Oct 5 14:01:45 server2 kernel: [ 0.208161] vgaarb: loaded
Oct 5 14:01:45 server2 kernel: [ 0.208299] PCI: Using ACPI for IRQ routing
Oct 5 14:01:45 server2 kernel: [ 0.208596] Switching to clocksource tsc
Oct 5 14:01:45 server2 kernel: [ 0.210640] pnp: PnP ACPI init
Oct 5 14:01:45 server2 kernel: [ 0.210670] ACPI: bus type pnp registered
Oct 5 14:01:45 server2 kernel: [ 0.219444] pnp: PnP ACPI: found 13 devices
Oct 5 14:01:45 server2 kernel: [ 0.219451] ACPI: ACPI bus type pnp unregistered
Oct 5 14:01:45 server2 kernel: [ 0.219460] PnPBIOS: Disabled by ACPI PNP
Oct 5 14:01:45 server2 kernel: [ 0.219484] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
Oct 5 14:01:45 server2 kernel: [ 0.219494] system 00:00: iomem range 0x3eee0000-0x3eefffff could not be reserved
Oct 5 14:01:45 server2 kernel: [ 0.219506] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
Oct 5 14:01:45 server2 kernel: [ 0.219516] system 00:00: iomem range 0x0-0x9ffff could not be reserved
Oct 5 14:01:45 server2 kernel: [ 0.219526] system 00:00: iomem range 0x100000-0x3eedffff could not be reserved
Oct 5 14:01:45 server2 kernel: [ 0.219537] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
Oct 5 14:01:45 server2 kernel: [ 0.219548] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
Oct 5 14:01:45 server2 kernel: [ 0.219559] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
Oct 5 14:01:45 server2 kernel: [ 0.219576] system 00:02: ioport range 0x400-0x47f has been reserved
Oct 5 14:01:45 server2 kernel: [ 0.219586] system 00:02: ioport range 0x500-0x50f has been reserved
Oct 5 14:01:45 server2 kernel: [ 0.219602] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
Oct 5 14:01:45 server2 kernel: [ 0.219612] system 00:03: ioport range 0x294-0x297 has been reserved
Oct 5 14:01:45 server2 kernel: [ 0.254542] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Oct 5 14:01:45 server2 kernel: [ 0.254551] pci 0000:00:01.0: IO window: 0xe000-0xefff
Oct 5 14:01:45 server2 kernel: [ 0.254563] pci 0000:00:01.0: MEM window: 0xfb000000-0xfcffffff
Oct 5 14:01:45 server2 kernel: [ 0.254573] pci 0000:00:01.0: PREFETCH window: 0xf4000000-0xf7ffffff
Oct 5 14:01:45 server2 kernel: [ 0.254597] pci 0000:00:01.0: setting latency timer to 64
Oct 5 14:01:45 server2 kernel: [ 0.254608] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Oct 5 14:01:45 server2 kernel: [ 0.254617] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Oct 5 14:01:45 server2 kernel: [ 0.254626] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
Oct 5 14:01:45 server2 kernel: [ 0.254635] pci_bus 0000:01: resource 1 mem: [0xfb000000-0xfcffffff]
Oct 5 14:01:45 server2 kernel: [ 0.254644] pci_bus 0000:01: resource 2 pref mem [0xf4000000-0xf7ffffff]
Oct 5 14:01:45 server2 kernel: [ 0.254717] NET: Registered protocol family 2
Oct 5 14:01:45 server2 kernel: [ 0.254923] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 5 14:01:45 server2 kernel: [ 0.255722] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 5 14:01:45 server2 kernel: [ 0.257804] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Oct 5 14:01:45 server2 kernel: [ 0.258439] TCP: Hash tables configured (established 131072 bind 65536)
Oct 5 14:01:45 server2 kernel: [ 0.258446] TCP reno registered
Oct 5 14:01:45 server2 kernel: [ 0.258594] NET: Registered protocol family 1
Oct 5 14:01:45 server2 kernel: [ 0.258643] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
Oct 5 14:01:45 server2 kernel: [ 0.259144] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
Oct 5 14:01:45 server2 kernel: [ 0.259163] pci 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
Oct 5 14:01:45 server2 kernel: [ 0.259187] pci 0000:00:10.0: PCI INT A disabled
Oct 5 14:01:45 server2 kernel: [ 0.259208] pci 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
Oct 5 14:01:45 server2 kernel: [ 0.259230] pci 0000:00:10.1: PCI INT A disabled
Oct 5 14:01:45 server2 kernel: [ 0.259250] pci 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
Oct 5 14:01:45 server2 kernel: [ 0.259271] pci 0000:00:10.2: PCI INT B disabled
Oct 5 14:01:45 server2 kernel: [ 0.259291] pci 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
Oct 5 14:01:45 server2 kernel: [ 0.259312] pci 0000:00:10.3: PCI INT B disabled
Oct 5 14:01:45 server2 kernel: [ 0.259332] pci 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
Oct 5 14:01:45 server2 kernel: [ 0.259364] pci 0000:00:10.4: PCI INT C disabled
Oct 5 14:01:45 server2 kernel: [ 0.259374] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
Oct 5 14:01:45 server2 kernel: [ 0.259391] pci 0000:01:00.0: Boot video device
Oct 5 14:01:45 server2 kernel: [ 0.259503] Unpacking initramfs...
Oct 5 14:01:45 server2 kernel: [ 0.986702] Freeing initrd memory: 8525k freed
Oct 5 14:01:45 server2 kernel: [ 0.998153] audit: initializing netlink socket (disabled)
Oct 5 14:01:45 server2 kernel: [ 0.998174] type=2000 audit(1380974496.995:1): initialized
Oct 5 14:01:45 server2 kernel: [ 1.007635] highmem bounce pool size: 64 pages
Oct 5 14:01:45 server2 kernel: [ 1.007647] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Oct 5 14:01:45 server2 kernel: [ 1.011405] VFS: Disk quotas dquot_6.5.2
Oct 5 14:01:45 server2 kernel: [ 1.011550] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 5 14:01:45 server2 kernel: [ 1.011691] msgmni has been set to 1749
Oct 5 14:01:45 server2 kernel: [ 1.012079] alg: No test for stdrng (krng)
Oct 5 14:01:45 server2 kernel: [ 1.012208] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Oct 5 14:01:45 server2 kernel: [ 1.012216] io scheduler noop registered
Oct 5 14:01:45 server2 kernel: [ 1.012222] io scheduler anticipatory registered
Oct 5 14:01:45 server2 kernel: [ 1.012228] io scheduler deadline registered
Oct 5 14:01:45 server2 kernel: [ 1.012255] io scheduler cfq registered (default)
Oct 5 14:01:45 server2 kernel: [ 1.012613] isapnp: Scanning for PnP cards...
Oct 5 14:01:45 server2 kernel: [ 1.366453] isapnp: No Plug & Play device found
Oct 5 14:01:45 server2 kernel: [ 1.369455] Linux agpgart interface v0.103
Oct 5 14:01:45 server2 kernel: [ 1.369727] agpgart: Detected VIA VT3314 chipset
Oct 5 14:01:45 server2 kernel: [ 1.375850] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
Oct 5 14:01:45 server2 kernel: [ 1.375913] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 5 14:01:45 server2 kernel: [ 1.376046] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 5 14:01:45 server2 kernel: [ 1.376189] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 5 14:01:45 server2 kernel: [ 1.376698] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 5 14:01:45 server2 kernel: [ 1.376887] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 5 14:01:45 server2 kernel: [ 1.377208] PNP: No PS/2 controller found. Probing ports directly.
Oct 5 14:01:45 server2 kernel: [ 1.377672] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 5 14:01:45 server2 kernel: [ 1.377685] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 5 14:01:45 server2 kernel: [ 1.377892] mice: PS/2 mouse device common for all mice
Oct 5 14:01:45 server2 kernel: [ 1.377970] rtc_cmos 00:05: RTC can wake from S4
Oct 5 14:01:45 server2 kernel: [ 1.378050] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Oct 5 14:01:45 server2 kernel: [ 1.378092] rtc0: alarms up to one year, y3k, 242 bytes nvram
Oct 5 14:01:45 server2 kernel: [ 1.378169] EISA: Probing bus 0 at eisa.0
Oct 5 14:01:45 server2 kernel: [ 1.378225] EISA: Detected 0 cards.
Oct 5 14:01:45 server2 kernel: [ 1.378232] cpuidle: using governor ladder
Oct 5 14:01:45 server2 kernel: [ 1.378238] cpuidle: using governor menu
Oct 5 14:01:45 server2 kernel: [ 1.378248] No iBFT detected.
Oct 5 14:01:45 server2 kernel: [ 1.379355] TCP cubic registered
Oct 5 14:01:45 server2 kernel: [ 1.379725] NET: Registered protocol family 10
Oct 5 14:01:45 server2 kernel: [ 1.381709] Mobile IPv6
Oct 5 14:01:45 server2 kernel: [ 1.381716] NET: Registered protocol family 17
Oct 5 14:01:45 server2 kernel: [ 1.381731] Using IPI Shortcut mode
Oct 5 14:01:45 server2 kernel: [ 1.381914] PM: Resume from disk failed.
Oct 5 14:01:45 server2 kernel: [ 1.381934] registered taskstats version 1
Oct 5 14:01:45 server2 kernel: [ 1.382465] rtc_cmos 00:05: setting system clock to 2013-10-05 12:01:38 UTC (1380974498)
Oct 5 14:01:45 server2 kernel: [ 1.382637] Initalizing network drop monitor service
Oct 5 14:01:45 server2 kernel: [ 1.382689] Freeing unused kernel memory: 444k freed
Oct 5 14:01:45 server2 kernel: [ 1.383394] Write protecting the kernel text: 2348k
Oct 5 14:01:45 server2 kernel: [ 1.383455] Write protecting the kernel read-only data: 900k
Oct 5 14:01:45 server2 kernel: [ 1.440299] udev[44]: starting version 164
Oct 5 14:01:45 server2 kernel: [ 1.946888] SCSI subsystem initialized
Oct 5 14:01:45 server2 kernel: [ 2.027393] libata version 3.00 loaded.
Oct 5 14:01:45 server2 kernel: [ 2.069408] usbcore: registered new interface driver usbfs
Oct 5 14:01:45 server2 kernel: [ 2.069750] usbcore: registered new interface driver hub
Oct 5 14:01:45 server2 kernel: [ 2.077824] usbcore: registered new device driver usb
Oct 5 14:01:45 server2 kernel: [ 2.081113] thermal LNXTHERM:01: registered as thermal_zone0
Oct 5 14:01:45 server2 kernel: [ 2.081134] ACPI: Thermal Zone [THRM] (0 C)
Oct 5 14:01:45 server2 kernel: [ 2.089588] pata_via 0000:00:0f.1: version 0.3.4
Oct 5 14:01:45 server2 kernel: [ 2.090068] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
Oct 5 14:01:45 server2 kernel: [ 2.090086] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
Oct 5 14:01:45 server2 kernel: [ 2.090322] scsi0 : pata_via
Oct 5 14:01:45 server2 kernel: [ 2.090729] scsi1 : pata_via
Oct 5 14:01:45 server2 kernel: [ 2.093934] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
Oct 5 14:01:45 server2 kernel: [ 2.093943] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
Oct 5 14:01:45 server2 kernel: [ 2.102627] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 5 14:01:45 server2 kernel: [ 2.102693] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
Oct 5 14:01:45 server2 kernel: [ 2.102732] ehci_hcd 0000:00:10.4: EHCI Host Controller
Oct 5 14:01:45 server2 kernel: [ 2.102774] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
Oct 5 14:01:45 server2 kernel: [ 2.102860] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdffe000
Oct 5 14:01:45 server2 kernel: [ 2.112656] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
Oct 5 14:01:45 server2 kernel: [ 2.112724] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Oct 5 14:01:45 server2 kernel: [ 2.112733] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 5 14:01:45 server2 kernel: [ 2.112741] usb usb1: Product: EHCI Host Controller
Oct 5 14:01:45 server2 kernel: [ 2.112748] usb usb1: Manufacturer: Linux 2.6.32-5-486 ehci_hcd
Oct 5 14:01:45 server2 kernel: [ 2.112756] usb usb1: SerialNumber: 0000:00:10.4
Oct 5 14:01:45 server2 kernel: [ 2.112977] usb usb1: configuration #1 chosen from 1 choice
Oct 5 14:01:45 server2 kernel: [ 2.113049] hub 1-0:1.0: USB hub found
Oct 5 14:01:45 server2 kernel: [ 2.113069] hub 1-0:1.0: 8 ports detected
Oct 5 14:01:45 server2 kernel: [ 2.113755] sata_via 0000:00:0f.0: version 2.4
Oct 5 14:01:45 server2 kernel: [ 2.113789] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
Oct 5 14:01:45 server2 kernel: [ 2.113859] sata_via 0000:00:0f.0: routed to hard irq line 11
Oct 5 14:01:45 server2 kernel: [ 2.113980] scsi2 : sata_via
Oct 5 14:01:45 server2 kernel: [ 2.114288] scsi3 : sata_via
Oct 5 14:01:45 server2 kernel: [ 2.117802] ata3: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 20
Oct 5 14:01:45 server2 kernel: [ 2.117812] ata4: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 20
Oct 5 14:01:45 server2 kernel: [ 2.121930] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Oct 5 14:01:45 server2 kernel: [ 2.121969] r8169 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 5 14:01:45 server2 kernel: [ 2.122015] r8169 0000:00:09.0: (unregistered net_device): no PCI Express capability
Oct 5 14:01:45 server2 kernel: [ 2.123771] r8169 0000:00:09.0: eth0: RTL8169sc/8110sc at 0xf8200000, 00:13:90:03:12:40, XID 18000000 IRQ 17
Oct 5 14:01:45 server2 kernel: [ 2.141080] fan PNP0C0B:00: registered as cooling_device0
Oct 5 14:01:45 server2 kernel: [ 2.141099] ACPI: Fan [FAN] (on)
Oct 5 14:01:45 server2 kernel: [ 2.171365] uhci_hcd: USB Universal Host Controller Interface driver
Oct 5 14:01:45 server2 kernel: [ 2.171475] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
Oct 5 14:01:45 server2 kernel: [ 2.171496] uhci_hcd 0000:00:10.0: UHCI Host Controller
Oct 5 14:01:45 server2 kernel: [ 2.171525] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Oct 5 14:01:45 server2 kernel: [ 2.171563] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000f900
Oct 5 14:01:45 server2 kernel: [ 2.171653] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Oct 5 14:01:45 server2 kernel: [ 2.171662] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 5 14:01:45 server2 kernel: [ 2.171670] usb usb2: Product: UHCI Host Controller
Oct 5 14:01:45 server2 kernel: [ 2.171677] usb usb2: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
Oct 5 14:01:45 server2 kernel: [ 2.171684] usb usb2: SerialNumber: 0000:00:10.0
Oct 5 14:01:45 server2 kernel: [ 2.172083] usb usb2: configuration #1 chosen from 1 choice
Oct 5 14:01:45 server2 kernel: [ 2.172241] hub 2-0:1.0: USB hub found
Oct 5 14:01:45 server2 kernel: [ 2.172263] hub 2-0:1.0: 2 ports detected
Oct 5 14:01:45 server2 kernel: [ 2.172380] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
Oct 5 14:01:45 server2 kernel: [ 2.172399] uhci_hcd 0000:00:10.1: UHCI Host Controller
Oct 5 14:01:45 server2 kernel: [ 2.172422] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Oct 5 14:01:45 server2 kernel: [ 2.172458] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000f800
Oct 5 14:01:45 server2 kernel: [ 2.172540] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Oct 5 14:01:45 server2 kernel: [ 2.172549] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 5 14:01:45 server2 kernel: [ 2.172557] usb usb3: Product: UHCI Host Controller
Oct 5 14:01:45 server2 kernel: [ 2.172564] usb usb3: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
Oct 5 14:01:45 server2 kernel: [ 2.172571] usb usb3: SerialNumber: 0000:00:10.1
Oct 5 14:01:45 server2 kernel: [ 2.172889] usb usb3: configuration #1 chosen from 1 choice
Oct 5 14:01:45 server2 kernel: [ 2.173040] hub 3-0:1.0: USB hub found
Oct 5 14:01:45 server2 kernel: [ 2.173061] hub 3-0:1.0: 2 ports detected
Oct 5 14:01:45 server2 kernel: [ 2.173172] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
Oct 5 14:01:45 server2 kernel: [ 2.173193] uhci_hcd 0000:00:10.2: UHCI Host Controller
Oct 5 14:01:45 server2 kernel: [ 2.173212] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Oct 5 14:01:45 server2 kernel: [ 2.173249] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f700
Oct 5 14:01:45 server2 kernel: [ 2.173337] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Oct 5 14:01:45 server2 kernel: [ 2.173345] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 5 14:01:45 server2 kernel: [ 2.173354] usb usb4: Product: UHCI Host Controller
Oct 5 14:01:45 server2 kernel: [ 2.173361] usb usb4: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
Oct 5 14:01:45 server2 kernel: [ 2.173368] usb usb4: SerialNumber: 0000:00:10.2
Oct 5 14:01:45 server2 kernel: [ 2.173689] usb usb4: configuration #1 chosen from 1 choice
Oct 5 14:01:45 server2 kernel: [ 2.173838] hub 4-0:1.0: USB hub found
Oct 5 14:01:45 server2 kernel: [ 2.173859] hub 4-0:1.0: 2 ports detected
Oct 5 14:01:45 server2 kernel: [ 2.173969] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
Oct 5 14:01:45 server2 kernel: [ 2.173988] uhci_hcd 0000:00:10.3: UHCI Host Controller
Oct 5 14:01:45 server2 kernel: [ 2.174007] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Oct 5 14:01:45 server2 kernel: [ 2.174043] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000f600
Oct 5 14:01:45 server2 kernel: [ 2.174123] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Oct 5 14:01:45 server2 kernel: [ 2.174131] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 5 14:01:45 server2 kernel: [ 2.174140] usb usb5: Product: UHCI Host Controller
Oct 5 14:01:45 server2 kernel: [ 2.174147] usb usb5: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
Oct 5 14:01:45 server2 kernel: [ 2.174154] usb usb5: SerialNumber: 0000:00:10.3
Oct 5 14:01:45 server2 kernel: [ 2.174465] usb usb5: configuration #1 chosen from 1 choice
Oct 5 14:01:45 server2 kernel: [ 2.174613] hub 5-0:1.0: USB hub found
Oct 5 14:01:45 server2 kernel: [ 2.174634] hub 5-0:1.0: 2 ports detected
Oct 5 14:01:45 server2 kernel: [ 2.264401] ata1.00: CFA: SanDisk SDCFH-008G, HDX 7.04, max UDMA/66
Oct 5 14:01:45 server2 kernel: [ 2.264412] ata1.00: 15625216 sectors, multi 1: LBA48
Oct 5 14:01:45 server2 kernel: [ 2.264460] ata1.00: limited to UDMA/33 due to 40-wire cable
Oct 5 14:01:45 server2 kernel: [ 2.273917] ata1.00: configured for UDMA/33
Oct 5 14:01:45 server2 kernel: [ 2.274098] scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH-00 HDX PQ: 0 ANSI: 5
Oct 5 14:01:45 server2 kernel: [ 2.320018] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Oct 5 14:01:45 server2 kernel: [ 2.640016] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Oct 5 14:01:45 server2 kernel: [ 2.780051] usb 2-1: new full speed USB device using uhci_hcd and address 2
Oct 5 14:01:45 server2 kernel: [ 2.781085] sd 0:0:0:0: [sda] 15625216 512-byte logical blocks: (8.00 GB/7.45 GiB)
Oct 5 14:01:45 server2 kernel: [ 2.781177] sd 0:0:0:0: [sda] Write Protect is off
Oct 5 14:01:45 server2 kernel: [ 2.781186] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 5 14:01:45 server2 kernel: [ 2.781226] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 5 14:01:45 server2 kernel: [ 2.781630] sda: sda1 sda2 < sda5 >
Oct 5 14:01:45 server2 kernel: [ 2.784523] sd 0:0:0:0: [sda] Attached SCSI removable disk
Oct 5 14:01:45 server2 kernel: [ 2.977545] usb 2-1: New USB device found, idVendor=0403, idProduct=6001
Oct 5 14:01:45 server2 kernel: [ 2.977556] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 5 14:01:45 server2 kernel: [ 2.977565] usb 2-1: Product: FT232R USB UART
Oct 5 14:01:45 server2 kernel: [ 2.977572] usb 2-1: Manufacturer: FTDI
Oct 5 14:01:45 server2 kernel: [ 2.977578] usb 2-1: SerialNumber: AM02062S
Oct 5 14:01:45 server2 kernel: [ 2.977795] usb 2-1: configuration #1 chosen from 1 choice
Oct 5 14:01:45 server2 kernel: [ 3.224020] usb 2-2: new full speed USB device using uhci_hcd and address 3
Oct 5 14:01:45 server2 kernel: [ 3.373496] usb 2-2: New USB device found, idVendor=046a, idProduct=0003
Oct 5 14:01:45 server2 kernel: [ 3.373505] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 5 14:01:45 server2 kernel: [ 3.373703] usb 2-2: configuration #1 chosen from 1 choice
Oct 5 14:01:45 server2 kernel: [ 3.376147] hub 2-2:1.0: USB hub found
Oct 5 14:01:45 server2 kernel: [ 3.378492] hub 2-2:1.0: 5 ports detected
Oct 5 14:01:45 server2 kernel: [ 3.379490] hub 2-2:1.0: insufficient power available to use all downstream ports
Oct 5 14:01:45 server2 kernel: [ 3.475685] PM: Starting manual resume from disk
Oct 5 14:01:45 server2 kernel: [ 3.475696] PM: Resume from partition 8:5
Oct 5 14:01:45 server2 kernel: [ 3.475701] PM: Checking hibernation image.
Oct 5 14:01:45 server2 kernel: [ 3.476639] PM: Error -22 checking image file
Oct 5 14:01:45 server2 kernel: [ 3.476645] PM: Resume from disk failed.
Oct 5 14:01:45 server2 kernel: [ 3.528136] EXT3-fs: INFO: recovery required on readonly filesystem.
Oct 5 14:01:45 server2 kernel: [ 3.528145] EXT3-fs: write access will be enabled during recovery.
Oct 5 14:01:45 server2 kernel: [ 3.648698] kjournald starting. Commit interval 5 seconds
Oct 5 14:01:45 server2 kernel: [ 3.648721] EXT3-fs: recovery complete.
Oct 5 14:01:45 server2 kernel: [ 3.651618] EXT3-fs: mounted filesystem with ordered data mode.
Oct 5 14:01:45 server2 kernel: [ 3.709499] usb 2-2.1: new low speed USB device using uhci_hcd and address 4
Oct 5 14:01:45 server2 kernel: [ 3.849440] usb 2-2.1: New USB device found, idVendor=046d, idProduct=c51b
Oct 5 14:01:45 server2 kernel: [ 3.849451] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Oct 5 14:01:45 server2 kernel: [ 3.849460] usb 2-2.1: Product: USB Receiver
Oct 5 14:01:45 server2 kernel: [ 3.849467] usb 2-2.1: Manufacturer: Logitech
Oct 5 14:01:45 server2 kernel: [ 3.849675] usb 2-2.1: configuration #1 chosen from 1 choice
Oct 5 14:01:45 server2 kernel: [ 3.953439] usb 2-2.4: new full speed USB device using uhci_hcd and address 5
Oct 5 14:01:45 server2 kernel: [ 4.083912] usb 2-2.4: New USB device found, idVendor=046a, idProduct=0001
Oct 5 14:01:45 server2 kernel: [ 4.083923] usb 2-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 5 14:01:45 server2 kernel: [ 4.084165] usb 2-2.4: configuration #1 chosen from 1 choice
Oct 5 14:01:45 server2 kernel: [ 4.233227] udev[338]: starting version 164
Oct 5 14:01:45 server2 kernel: [ 4.809852] processor LNXCPU:00: registered as cooling_device1
Oct 5 14:01:45 server2 kernel: [ 4.980993] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 5 14:01:45 server2 kernel: [ 5.027331] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Oct 5 14:01:45 server2 kernel: [ 5.027349] ACPI: Power Button [PWRB]
Oct 5 14:01:45 server2 kernel: [ 5.027507] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
Oct 5 14:01:45 server2 kernel: [ 5.027525] ACPI: Sleep Button [SLPB]
Oct 5 14:01:45 server2 kernel: [ 5.027720] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Oct 5 14:01:45 server2 kernel: [ 5.027732] ACPI: Power Button [PWRF]
Oct 5 14:01:45 server2 kernel: [ 5.141950] input: PC Speaker as /devices/platform/pcspkr/input/input3
Oct 5 14:01:45 server2 kernel: [ 5.142811] usbcore: registered new interface driver usbserial
Oct 5 14:01:45 server2 kernel: [ 5.143179] USB Serial support registered for generic
Oct 5 14:01:45 server2 kernel: [ 5.143577] usbcore: registered new interface driver usbserial_generic
Oct 5 14:01:45 server2 kernel: [ 5.143586] usbserial: USB Serial Driver core
Oct 5 14:01:45 server2 kernel: [ 5.193762] parport_pc 00:0a: reported by Plug and Play ACPI
Oct 5 14:01:45 server2 kernel: [ 5.193821] parport0: PC-style at 0x378, irq 7 [PCSPP]
Oct 5 14:01:45 server2 kernel: [ 5.242140] usbcore: registered new interface driver hiddev
Oct 5 14:01:45 server2 kernel: [ 5.260074] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input4
Oct 5 14:01:45 server2 kernel: [ 5.260648] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-2.1/input0
Oct 5 14:01:45 server2 kernel: [ 5.262107] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 5 14:01:45 server2 kernel: [ 5.275525] generic-usb 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.0-2.1/input1
Oct 5 14:01:45 server2 kernel: [ 5.303760] input: HID 046a:0001 as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2.4/2-2.4:1.0/input/input5
Oct 5 14:01:45 server2 kernel: [ 5.303969] generic-usb 0003:046A:0001.0003: input,hidraw2: USB HID v1.00 Keyboard [HID 046a:0001] on usb-0000:00:10.0-2.4/input0
Oct 5 14:01:45 server2 kernel: [ 5.305527] usbcore: registered new interface driver usbhid
Oct 5 14:01:45 server2 kernel: [ 5.305938] usbhid: v2.6:USB HID core driver
Oct 5 14:01:45 server2 kernel: [ 5.373461] USB Serial support registered for FTDI USB Serial Device
Oct 5 14:01:45 server2 kernel: [ 5.374257] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected
Oct 5 14:01:45 server2 kernel: [ 5.374424] usb 2-1: Detected FT232RL
Oct 5 14:01:45 server2 kernel: [ 5.374431] usb 2-1: Number of endpoints 2
Oct 5 14:01:45 server2 kernel: [ 5.374438] usb 2-1: Endpoint 1 MaxPacketSize 64
Oct 5 14:01:45 server2 kernel: [ 5.374445] usb 2-1: Endpoint 2 MaxPacketSize 64
Oct 5 14:01:45 server2 kernel: [ 5.374452] usb 2-1: Setting MaxPacketSize 64
Oct 5 14:01:45 server2 kernel: [ 5.384419] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0
Oct 5 14:01:45 server2 kernel: [ 5.384574] usbcore: registered new interface driver ftdi_sio
Oct 5 14:01:45 server2 kernel: [ 5.384581] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
Oct 5 14:01:45 server2 kernel: [ 5.402247] gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 828kHz
Oct 5 14:01:45 server2 kernel: [ 5.512457] Error: Driver 'pcspkr' is already registered, aborting...
Oct 5 14:01:45 server2 kernel: [ 5.571522] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Oct 5 14:01:45 server2 kernel: [ 5.571543] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
Oct 5 14:01:45 server2 kernel: [ 5.571712] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
Oct 5 14:01:45 server2 kernel: [ 6.528510] Adding 210936k swap on /dev/sda5. Priority:-1 extents:1 across:210936k
Oct 5 14:01:45 server2 kernel: [ 6.632769] EXT3 FS on sda1, internal journal
Oct 5 14:01:45 server2 kernel: [ 6.741604] loop: module loaded
Oct 5 14:01:45 server2 kernel: [ 8.271967] r8169 0000:00:09.0: eth0: link down
Oct 5 14:01:45 server2 kernel: [ 8.298816] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 5 14:01:45 server2 acpid: starting up with netlink and the input layer
Oct 5 14:01:45 server2 acpid: 1 rule loaded
Oct 5 14:01:45 server2 acpid: waiting for events: event logging is off
Oct 5 14:01:46 server2 /usr/sbin/cron[1055]: (CRON) INFO (pidfile fd = 3)
Oct 5 14:01:46 server2 /usr/sbin/cron[1056]: (CRON) STARTUP (fork ok)
Oct 5 14:01:46 server2 /usr/sbin/cron[1056]: (CRON) INFO (Running @reboot jobs)
Oct 5 14:01:46 server2 /USR/SBIN/CRON[1065]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:01:47 server2 acpid: client connected from 1149[104:107]
Oct 5 14:01:47 server2 acpid: 1 client rule loaded
Oct 5 14:01:47 server2 kernel: [ 10.604898] r8169 0000:00:09.0: eth0: link up
Oct 5 14:01:47 server2 kernel: [ 10.605574] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 5 14:01:48 server2 oscam[1199]: 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8943 (i486-linux-gnu)
Oct 5 14:01:48 server2 oscam[1199]: 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1199
Oct 5 14:01:48 server2 oscam[1199]: 0 s services reloaded: 0 services freed, 16 services loaded, rejected 0
Oct 5 14:01:48 server2 oscam[1199]: 0 s userdb reloaded: 23 accounts loaded, 0 expired, 2 disabled
Oct 5 14:01:48 server2 oscam[1199]: 0 s signal handling initialized
Oct 5 14:01:48 server2 oscam[1199]: 0 s 459 service-id's loaded in 9ms
Oct 5 14:01:48 server2 oscam[1199]: 0 s monitor: initialized (fd=4, port=988)
Oct 5 14:01:48 server2 oscam[1199]: 0 s cccam: initialized (fd=5, port=17896)
Oct 5 14:01:48 server2 oscam[1199]: 0 s d02 [mouse] creating thread for device /dev/d02
Oct 5 14:01:48 server2 oscam[1199]: 0 s g09 [mouse] creating thread for device /dev/g09
Oct 5 14:01:48 server2 oscam[1199]: 0 s tc [mouse] creating thread for device /dev/tc
Oct 5 14:01:48 server2 oscam[1199]: 0 s sat [mouse] creating thread for device /dev/sat
Oct 5 14:01:48 server2 oscam[1199]: 0 s hd [mouse] creating thread for device /dev/hd
Oct 5 14:01:48 server2 oscam[1199]: 0 s loadbalancer: can't read from file /tmp/.oscam/stat
Oct 5 14:01:48 server2 oscam[1199]: 0 s anti cascading disabled
Oct 5 14:01:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:01:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:01:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:01:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:01:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:01:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:01:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:01:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:01:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:01:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:01:48 server2 oscam[1199]: 8BDA4E8 h webif: decompressed 54245 bytes back into 154648 bytes
Oct 5 14:01:48 server2 oscam[1199]: 8BDA4E8 h HTTP Server running. ip=0.0.0.0 port=52315
Oct 5 14:01:58 server2 kernel: [ 21.076011] eth0: no IPv6 routers present
Oct 5 14:01:59 server2 ntpdate[1008]: step time server 91.64.203.19 offset 0.526549 sec
Oct 5 14:02:02 server2 /USR/SBIN/CRON[1221]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:02:02 server2 /USR/SBIN/CRON[1222]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:02:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:02:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:02:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:02:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:02:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:02:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:02:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:02:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:02:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:02:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:02:48 server2 kernel: [ 71.011059] console-kit-dae[1265]: segfault at 4cf1e ip 0004cf1e sp bfea5c3c error 4 in console-kit-daemon[8048000+1d000]
Oct 5 14:03:01 server2 /USR/SBIN/CRON[1417]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:03:01 server2 /USR/SBIN/CRON[1418]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:03:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:03:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:03:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:03:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:03:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:03:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:03:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:03:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:03:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:03:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:04:01 server2 /USR/SBIN/CRON[1475]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:04:01 server2 /USR/SBIN/CRON[1476]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:04:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:04:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:04:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:04:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:04:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:04:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:04:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:04:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:04:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:04:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:05:01 server2 /USR/SBIN/CRON[1518]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:05:01 server2 /USR/SBIN/CRON[1519]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:05:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:05:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:05:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:05:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:05:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:05:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:05:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:05:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:05:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:05:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:06:01 server2 /USR/SBIN/CRON[1578]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:06:01 server2 /USR/SBIN/CRON[1579]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:06:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:06:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:06:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:06:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:06:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:06:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:06:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:06:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:06:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:06:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:07:01 server2 /USR/SBIN/CRON[1642]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:07:01 server2 /USR/SBIN/CRON[1643]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:07:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:07:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:07:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:07:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:07:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:07:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:07:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:07:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:07:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:07:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:08:01 server2 /USR/SBIN/CRON[1703]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:08:01 server2 /USR/SBIN/CRON[1704]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:08:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:08:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:08:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:08:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:08:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:08:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:08:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:08:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:08:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:08:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:09:01 server2 /USR/SBIN/CRON[1763]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete)
Oct 5 14:09:01 server2 /USR/SBIN/CRON[1764]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:09:01 server2 /USR/SBIN/CRON[1765]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:09:01 server2 /USR/SBIN/CRON[1760]: (CRON) error (grandchild #1765 failed with exit status 139)
Oct 5 14:09:01 server2 kernel: [ 443.890865] apache2-watchdo[1767]: segfault at 1f6f664 ip 080ee1a1 sp bf9fdd60 error 4 in bash[8048000+c2000]
Oct 5 14:09:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:09:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:09:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:09:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:09:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:09:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:09:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:09:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:09:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:09:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:10:01 server2 /USR/SBIN/CRON[1833]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:10:01 server2 /USR/SBIN/CRON[1834]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:10:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:10:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:10:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:10:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:10:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:10:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:10:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:10:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:10:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:10:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:11:02 server2 /USR/SBIN/CRON[1890]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:11:02 server2 /USR/SBIN/CRON[1891]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:11:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:11:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:11:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:11:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:11:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:11:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:11:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:11:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:11:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:11:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:12:01 server2 /USR/SBIN/CRON[1953]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:12:01 server2 /USR/SBIN/CRON[1954]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:12:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:12:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:12:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:12:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:12:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:12:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:12:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:12:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:12:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:12:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:13:01 server2 /USR/SBIN/CRON[2017]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:13:01 server2 /USR/SBIN/CRON[2018]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:13:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:13:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:13:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:13:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:13:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:13:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:13:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:13:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:13:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:13:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:14:01 server2 /USR/SBIN/CRON[2083]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:14:01 server2 /USR/SBIN/CRON[2084]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:14:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:14:48 server2 oscam[1199]: 8BC5F68 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:14:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:14:48 server2 oscam[1199]: 8BC7C58 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:14:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:14:48 server2 oscam[1199]: 8BD47D0 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:14:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:14:48 server2 oscam[1199]: 8BD64C0 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:14:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:14:48 server2 oscam[1199]: 8BD81B0 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:15:01 server2 /USR/SBIN/CRON[2145]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:15:01 server2 /USR/SBIN/CRON[2146]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:15:14 server2 kernel: [ 816.771407] serve_process[2190]: segfault at 98751 ip 00098751 sp b735d930 error 4 in oscam.x86[8048000+e7000]
Oct 5 14:16:01 server2 /USR/SBIN/CRON[2196]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:16:01 server2 /USR/SBIN/CRON[2197]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:16:01 server2 oscam[2248]: 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8943 (i486-linux-gnu)
Oct 5 14:16:01 server2 oscam[2248]: 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2248
Oct 5 14:16:01 server2 oscam[2248]: 0 s services reloaded: 0 services freed, 16 services loaded, rejected 0
Oct 5 14:16:01 server2 oscam[2248]: 0 s userdb reloaded: 23 accounts loaded, 0 expired, 2 disabled
Oct 5 14:16:01 server2 oscam[2248]: 0 s signal handling initialized
Oct 5 14:16:01 server2 oscam[2248]: 0 s 459 service-id's loaded in 3ms
Oct 5 14:16:01 server2 oscam[2248]: 0 s monitor: initialized (fd=4, port=988)
Oct 5 14:16:01 server2 oscam[2248]: 0 s cccam: initialized (fd=5, port=17896)
Oct 5 14:16:01 server2 oscam[2248]: 0 s d02 [mouse] creating thread for device /dev/d02
Oct 5 14:16:01 server2 oscam[2248]: 0 s g09 [mouse] creating thread for device /dev/g09
Oct 5 14:16:01 server2 oscam[2248]: 0 s tc [mouse] creating thread for device /dev/tc
Oct 5 14:16:01 server2 oscam[2248]: 0 s sat [mouse] creating thread for device /dev/sat
Oct 5 14:16:01 server2 oscam[2248]: 0 s hd [mouse] creating thread for device /dev/hd
Oct 5 14:16:01 server2 oscam[2248]: 0 s loadbalancer: can't read from file /tmp/.oscam/stat
Oct 5 14:16:01 server2 oscam[2248]: 0 s anti cascading disabled
Oct 5 14:16:01 server2 oscam[2248]: 8EAD130 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:16:01 server2 oscam[2248]: 8EAD130 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:16:01 server2 oscam[2248]: 8EAEE20 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:16:01 server2 oscam[2248]: 8EAEE20 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:16:01 server2 oscam[2248]: 8EBBA98 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:16:01 server2 oscam[2248]: 8EBBA98 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:16:01 server2 oscam[2248]: 8EBD788 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:16:01 server2 oscam[2248]: 8EBD788 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:16:01 server2 oscam[2248]: 8EBF478 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:16:01 server2 oscam[2248]: 8EBF478 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:16:01 server2 oscam[2248]: 8EC1BB8 h webif: decompressed 54245 bytes back into 154648 bytes
Oct 5 14:16:01 server2 oscam[2248]: 8EC1BB8 h HTTP Server running. ip=0.0.0.0 port=52315
Oct 5 14:16:02 server2 kernel: [ 864.529531] oscam[2260]: segfault at 823770 ip 0807dcdb sp bfd0bfd0 error 4 in bash[8048000+c2000]
Oct 5 14:17:01 server2 /USR/SBIN/CRON[2269]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:17:01 server2 /USR/SBIN/CRON[2268]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 5 14:17:01 server2 /USR/SBIN/CRON[2270]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:17:01 server2 oscam[2248]: 8EAD130 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:17:01 server2 oscam[2248]: 8EAD130 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:17:01 server2 oscam[2248]: 8EAEE20 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:17:01 server2 oscam[2248]: 8EAEE20 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:17:01 server2 oscam[2248]: 8EBBA98 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:17:01 server2 oscam[2248]: 8EBBA98 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:17:01 server2 oscam[2248]: 8EBD788 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:17:01 server2 oscam[2248]: 8EBD788 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:17:01 server2 oscam[2248]: 8EBF478 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:17:01 server2 oscam[2248]: 8EBF478 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:18:01 server2 /USR/SBIN/CRON[2357]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:18:01 server2 /USR/SBIN/CRON[2358]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:18:01 server2 oscam[2248]: 8EAEE20 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:18:01 server2 oscam[2248]: 8EAEE20 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:18:01 server2 oscam[2248]: 8EAD130 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:18:01 server2 oscam[2248]: 8EAD130 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:18:01 server2 oscam[2248]: 8EBBA98 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:18:01 server2 oscam[2248]: 8EBBA98 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:18:01 server2 oscam[2248]: 8EBD788 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:18:01 server2 oscam[2248]: 8EBD788 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:18:01 server2 oscam[2248]: 8EBF478 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:18:01 server2 oscam[2248]: 8EBF478 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:19:01 server2 oscam[2248]: 8EAEE20 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:19:01 server2 oscam[2248]: 8EAEE20 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:19:01 server2 oscam[2248]: 8EBBA98 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:19:01 server2 oscam[2248]: 8EBBA98 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:19:01 server2 oscam[2248]: 8EAD130 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:19:01 server2 oscam[2248]: 8EAD130 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:19:01 server2 oscam[2248]: 8EBD788 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:19:01 server2 oscam[2248]: 8EBD788 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:19:01 server2 oscam[2248]: 8EBF478 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:19:01 server2 oscam[2248]: 8EBF478 r hd [mouse] Cannot open device: /dev/hd
Oct 5 14:19:01 server2 /USR/SBIN/CRON[2432]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:19:01 server2 /USR/SBIN/CRON[2433]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:19:45 server2 suhosin[2325]: ALERT - end canary mismatch on efree() - heap overflow detected at 0xb8c04a84 (attacker '192.168.178.32', file '/var/www/ipc/page/menue.php')
Oct 5 14:19:57 server2 suhosin[2332]: ALERT - canary mismatch on efree() - heap overflow detected at 0xb8b22b2c (attacker '192.168.178.32', file '/var/www/ipc/page/include/functions.php', line 1)
Oct 5 14:20:01 server2 /USR/SBIN/CRON[2513]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Oct 5 14:20:01 server2 /USR/SBIN/CRON[2514]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Oct 5 14:20:01 server2 oscam[2248]: 8EAEE20 r g09 [mouse] ERROR: Opening device /dev/g09 (errno=2 No such file or directory)
Oct 5 14:20:01 server2 oscam[2248]: 8EAEE20 r g09 [mouse] Cannot open device: /dev/g09
Oct 5 14:20:01 server2 oscam[2248]: 8EBBA98 r tc [mouse] ERROR: Opening device /dev/tc (errno=2 No such file or directory)
Oct 5 14:20:01 server2 oscam[2248]: 8EBBA98 r tc [mouse] Cannot open device: /dev/tc
Oct 5 14:20:01 server2 oscam[2248]: 8EAD130 r d02 [mouse] ERROR: Opening device /dev/d02 (errno=2 No such file or directory)
Oct 5 14:20:01 server2 oscam[2248]: 8EAD130 r d02 [mouse] Cannot open device: /dev/d02
Oct 5 14:20:01 server2 oscam[2248]: 8EBD788 r sat [mouse] ERROR: Opening device /dev/sat (errno=2 No such file or directory)
Oct 5 14:20:01 server2 oscam[2248]: 8EBD788 r sat [mouse] Cannot open device: /dev/sat
Oct 5 14:20:01 server2 oscam[2248]: 8EBF478 r hd [mouse] ERROR: Opening device /dev/hd (errno=2 No such file or directory)
Oct 5 14:20:01 server2 oscam[2248]: 8EBF478 r hd [mouse] Cannot open device: /dev/hd
unish:
