SRVID und SERVICES weg

[Cashmaster]

AW: SRVID und SERVICES weg

Bei httpuser und httppwd auch die Raute entfernt?

Welche Leerzeichen bei httpport?
Es war doch nur die Raute davor.

Ja, alle Rauten weg gemacht und dann waren Leerzeichen daneben dann kam ein = dann wieder Leerzeichen und dann die Login Konfigurationen....diese Leerzeichen hab ich alle rausgenommen.

Hi,
geb doch mal bitte über telnet ps ax ein.
Suche dann in dieser Prozessliste mal nach einem Prozess namens oscam... o.ä. und poste mal diesen kompletten Eintrag.
Hier sollte man jetzt erkennen, von wo die configs geladen werden

Grüße
Janni1

siehe: Spoiler

Spoiler

PID USER VSZ STAT COMMAND 1 root 1724 S init [3]
2 root 0 SW [migration/0]
3 root 0 SWN [ksoftirqd/0]
4 root 0 SW [migration/1]
5 root 0 SWN [ksoftirqd/1]
6 root 0 SW< [events/0]
7 root 0 SW< [events/1]
8 root 0 SW< [khelper]
9 root 0 SW< [kthread]
10 root 0 SW< [kblockd/0]
11 root 0 SW< [kblockd/1]
12 root 0 SW< [khubd]
13 root 0 SW [pdflush]
14 root 0 SW [pdflush]
15 root 0 SW< [kswapd0]
16 root 0 SW< [aio/0]
17 root 0 SW< [aio/1]
18 root 0 SW< [ata/0]
19 root 0 SW< [ata/1]
20 root 0 SW< [ata_aux]
21 root 0 SW< [scsi_eh_0]
22 root 0 SW< [scsi_eh_1]
23 root 0 SW [mtdblockd]
24 root 0 SWN [jffs2_gcd_mtd3]
70 root 2180 S < udevd --daemon
266 root 0 SW [kcdfsd]
318 root 0 SW [b_event]
319 root 0 SW [b_idle]
324 root 0 SW< [fp]
339 root 0 SW< [mpeg]
351 root 0 SW< [dmx0]
358 root 0 SW< [dmx1]
366 root 0 SW< [dmx2]
368 root 0 SW< [dmx3]
369 root 0 SW< [dmx4]
370 root 0 SW< [dmx_hw_sec]
411 root 1928 S /usr/bin/wdog tpmd
412 root 4312 S tpmd
445 root 4076 S nmbd -D
447 root 6780 S smbd -D
464 root 6780 S smbd -D
477 root 2520 S udhcpc -R -b -T3 -A10 -p /var/run/udhcpc.eth0.pid -i
491 root 1712 S /usr/sbin/zeroconf -i eth0
504 messageb 2408 S /usr/bin/dbus-daemon --system
525 root 11856 S /usr/bin/gdaemon
533 root 11856 S /usr/bin/gdaemon
534 root 2348 S /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host


539 root 2520 S /usr/sbin/crond -c /etc/cron/crontabs
552 root 1832 S /usr/sbin/inetd
559 root 2520 S /sbin/syslogd -n -O /var/log/messages -s 32 -b 1 -m 2
561 root 2520 S /sbin/klogd -n
678 root 2256 S /usr/sbin/automount --pid-file=/var/run/autofs/_autof
734 avahi 3084 S avahi-daemon: running [dm500hd.local]
744 root 2520 S /bin/sh /usr/bin/enigma2.sh
747 root 104m S /usr/bin/enigma2
755 root 104m S /usr/bin/enigma2
769 root 104m S N /usr/bin/enigma2
770 root 104m S N /usr/bin/enigma2
785 root 104m S /usr/bin/enigma2
788 root 104m S N /usr/bin/enigma2
775 root 4984 S /usr/bin/oscam_1.00
778 root 54940 S < /usr/bin/oscam_1.00
779 root 54940 S < /usr/bin/oscam_1.00
780 root 54940 S < /usr/bin/oscam_1.00
781 root 54940 S < /usr/bin/oscam_1.00
782 root 54940 S < /usr/bin/oscam_1.00
828 root 54940 S < /usr/bin/oscam_1.00
790 root 0 SW< [kdvb-ad-0-fe-0]
802 root 125m S /usr/bin/CCcam_2.2.1
803 root 125m S /usr/bin/CCcam_2.2.1
804 root 125m S /usr/bin/CCcam_2.2.1
805 root 125m S /usr/bin/CCcam_2.2.1
806 root 125m S /usr/bin/CCcam_2.2.1
807 root 125m S /usr/bin/CCcam_2.2.1
808 root 125m S /usr/bin/CCcam_2.2.1
809 root 125m S /usr/bin/CCcam_2.2.1
810 root 125m S /usr/bin/CCcam_2.2.1
816 root 125m S /usr/bin/CCcam_2.2.1
818 root 125m S /usr/bin/CCcam_2.2.1
819 root 125m S /usr/bin/CCcam_2.2.1
821 root 125m S /usr/bin/CCcam_2.2.1
822 root 125m S /usr/bin/CCcam_2.2.1
824 root 125m S /usr/bin/CCcam_2.2.1
831 root 125m S /usr/bin/CCcam_2.2.1
4951 root 2840 S telnetd
4952 root 2836 S -sh


4956 nobody 2292 S vsftpd
4958 root 2328 S vsftpd
4959 nobody 2292 S vsftpd
4961 root 2316 S vsftpd
4965 root 2836 R ps ax

oscam neu gestartet?

ja.

 

[Vigor]

AW: SRVID und SERVICES weg

Leerzeichen vor und hinter dem "=" müßen bleiben.

So soll es aussehen:
[webif]
httpport = 8888
httpuser = myusername
httppwd = mypassword

 

[janni1]

AW: SRVID und SERVICES weg

Hi,
deine oscam-configs sollten standartmäßig unter
/etc/tuxbox/config
liegen.

Gruß
janni1

 

[Cashmaster]

AW: SRVID und SERVICES weg

Hi,
deine oscam-configs sollten standartmäßig unter
/etc/tuxbox/config
liegen.

Gruß
janni1

nur leider sind da nicht die richtigen Dateien drin.

 

[janni1]

AW: SRVID und SERVICES weg

Hi,
und was sind dort für Dateien drin im Verzeichnis /config ? Woher weißt du, dass das die falschen sind?
Oscam wird bei dir ohne Parameter gestartet, also müßten die configs aus dem Standartverzeichnis geladen werden.
und das ist nun mal /etc/tuxbox/config/.

Gruß
janni1

 

[Cashmaster]

AW: SRVID und SERVICES weg

Hi,

okay in dem /config Ordner des Pfades /etc/tuxbox sind folgende Dateien:
oscam.ac
oscam.cert
oscam.conf
oscam.guess
oscam.ird
oscam.server
oscam.services
oscam.srvid
oscam.user

öffne bzw. geh ich nun auf bearbeiten der oscam.srvid datei sehe ich z.B. oben angefangen sky-deutschland
dann darunter die ganzen caids mit den dazugehörigen Kanälen, also beispiel:

1702,1722,1833,1834,09C4:00FC|Sky|Sky Bundesliga 00FC|TV|Sky Bundesliga

dass zieht sich dann bis runter bis kabel-deutschland usw.

Mein Problem ist:
a) Ich habe Sender hell wie Pro7 HD die gar nicht dort aufgeführt sind
b) wenn ich neue Caids dort einfüge werden sie nicht erkannt, bzw. nicht hell (obwohl neugestartet)

So ähnlich verhält es sich mit oscam.services
Beispiel: [privat_hd]caid=1834,1722,09C7,1861,1801
provid=000000,000401
srvid=C359,C35F,C362,C365,C363,C35A,C356,C352,C351,C357,C358,C355,C353,C354,C364,C366,C361,C360,C367,C368,C371,C373,C37F,CF16,C370

eine Editierung hat keinerlei Auswirkung, sodass ich zu dem Schluss gekommen bin, dass das nicht die Datei sein kann

 

[janni1]

AW: SRVID und SERVICES weg

Hi,
allein das Editieren von der oscam.srvid macht noch keine Sender hell oder dunkel.
Diese Datei ist nur dafür da, dass im Log oder im WebIf Sendernamen angezeigt werden.
Auch das Editieren der oscam.services macht allein noch keine Sender hell,
dazu müßte man sich auch mal die restlichen Dateien anschauen.

Poste am besten nochmal dein Problem und dazu oscam.conf, -.user, -server und -services.
Auch deine oscam 1.00 kommt mir etwas alt vor.

Gruß
janni1

 

[Cashmaster]

AW: Oscam + CCcam auf Newnigma2 installieren

Hallo, habe die Version von Beitrag 2 genommen.

Soweit alles schick, habe jetzt Oscam 1.20 und das neueste CCCam. Habe als EMU jetzt CCCam/OSCam laufen. Allerdings habe ich kein oscam.conf in tuxbox
Wenn ich über den Feed lade, fehlt micht oscam.services und oscam.srvid

 

[Cashmaster]

Ich habe CCCam und OSCAM laufen da ich sowohl share als auch empfange.
Mein Problem ist:
a) wo sehe ich die Sender wie Pro7 HD weil die ja hell sein von KD und ich da mal irgendwas, irgendwann eingestellt habe
b) die neuen Sender die jetzt hinzukamen in den letzten 2 Jahren würde ich gerne hell bekommen z.B. N24HD

Meine OSCAM.conf

Spoiler

## main configuration
#


[global]
pidfile=/var/run/oscam.pid
usrfile=var/log/oscamuser.log
logfile=/var/log/oscam.log
cwlogdir=/var/log/cw.log
usrfileflag=0
clienttimeout=7
fallbacktimeout=5
clientmaxidle=120
cachedelay=300
bindwait=120
netprio=0
resolvedelay=30
unlockparental=0
nice=-5
serialreadertimeout=2500
maxlogsize=2048
waitforcards=1
preferlocalcards=0




# logging


#pidfile = /var/run/oscam.pid
#logfile = /var/log/oscam/oscam.log
#usrfile = /var/log/oscam/oscamuser.log
#cwlogdir = /var/log/oscam/cw


# monitor


#[monitor]
#port = 988
#aulow = 120
#monlevel = 1


# web interface


[webif]
httpport = 8888
httpuser = chao
httppwd = brasso11


# protocols


[newcamd]
port=25834@1834:000000
key=0102030405060708091011121314
keepalive=100




#[radegast]
#port = 20000
#user = user1
#allowed = 192.168.0.0-192.168.255.255


#[cs378x]
#port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0300:FFFFFF


#[cccam]
#port = 40000
#version = 1.2.3
#build = 1234
#reshare = 2


#[gbox]
#password = password1
#maxdist = 4
#cardinfos = card.infos
#ignorelist = ignore.list
#onlineinfos = online.infos
#locals = 01000000,02000000,0300FFFF


#[serial]
#device = user2@/dev/ttyS0?delay=1&timeout=300


[dvbapi]
enabled = 1
user = user1
demux = /dev/dvb/adapter0/demux0
ca = /dev/dvb/adapter0/ca1
socket = /tmp/camd.socket

Meine OSCAM.user

Spoiler

# user configuration
#


# user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled


[account]
user=oscam
pwd=oscamserver
disabled=0
group=1
uniq=0
sleep=0
monlevel=0
au=oscam
services=skyhd-mapping,KabelDeutschland-HD-mapping
caid=1834
betatunnel=1834.FFFF:1722
ident=1834:000000
keepalive=0
numusers=0
penalty=0


#[account]
#user=oscam
#pwd=oscamserver
#disabled=0
#au=reader0
#group=1
#uniq=0
#sleep=0
#monlevel=0
#services=skyhd-mapping,KabelDeutschland-HD-mapping
#caid=1834
#betatunnel=
#1834.0000:1722,1834.0081:1722,1834.0082:1722,1834.0083:1722,1834
#.0084:1722,1834.006f:1722,1834.0070:1722,1834.0071
#:1722,1834.0072:1722,1834.C351:1722,1834.C352:1722,1834.C353:1722,1834.
#C354:1722,1834.C355:1722,1834.C356:1722,1834.C357:1722,1834.C358:1722
#ident=1834:000000
#keepalive=0
#numusers=0
#penalty=0




# user for group 2 with monitor access, AU enabled


#[account]
#user = user2
#pwd = password2
#monlevel = 1
#uniq = 0
#group = 2
#au = reader2
#services = services2
#ident = 0200:000000
#caid = 0200


# user for group 2 without monitor access, AU disabled, account disabled


#[account]
#user = user3
#pwd = password3
#disabled = 1
#group = 2
#services = services2
#ident = 0200:000000
#caid = 0200


# user for group 3 without monitor access, only one connection possible, AU disabled, multiple idents


#[account]
#user = user4
#pwd = password4
#monlevel = 0
#uniq = 1
#group = 3
#ident = 0300:000000,FFFFFF;0400:FFFFFF
#caid = 0300

Meine OSCAM.server

Spoiler

## reader configuration
#


# serial reader


[reader]
label=reader0
protocol=cccam
device=127.0.0.1,12000
account=oscam,oscamreader
group=1
services=sky
detect=none
CAID=1722,1834
cccversion=2.1.4
cccbuild=3165




# USB serial reader


#[reader]
#label = reader2
#protocol = mouse
#detect = CD
#device = /dev/ttyUSB0
#aeskey = 000102030405060708090A0B0C0D0E0F
#group = 2
#emmcache = 1,3,2
#services = services2
#caid = 0200


# remote newcamd reader with fallback for group 1


#[reader]
#label = remote1
#protocol = newcamd
#key = 0102030405060708091011121314
#device = 192.168.0.2,66666
#account = login1,password1
#group = 1
#fallback = 1


# remote camd 3.78x reader with fallback for group 2


#[reader]
#label = remote2
#protocol = cs378x
#device = 192.168.0.3,23456
#account = login2,password2
#group = 2
#fallback = 1


# remote gbox reader


#[reader]
#label = remote3
#protocol = gbox
#device = 192.168.0.4,34567,45678
#account = login3,password3
#group = 3
#caid = 0300


# remote CCcam reader


#[reader]
#label = remote4
#protocol = cccam
#device = 192.168.0.5,45678
#account = login4,password4
#group = 4
#caid = 0400
#cccversion = 1.2.34
#cccbuild = 5678


# remote radegast reader


#[reader]
#label = remote5
#protocol = radegast
#device = 192.168.0.6,56789
#group = 5
#caid = 0500


# PCSC reader


#[reader]
#label = mypcscreader
#protocol = pcsc
#device = 0
#aeskey = 0102030405060708090a0b0c0d0e0f10
#group = 6
#caid = 0600


# Smargo Smartreader+


#[reader]
#label = mysmartreader
#protocol = smartreader
#device = 001:002
#aeskey = 0102030405060708090a0b0c0d0e0f10
#group = 7
#caid = 0700


# internal reader


#[reader]
#label = myinternalreader
#protocol = internal
#device = /dev/sci0
#group = 8
#caid = 0800

Meine OSCAM.services

Spoiler

## definition of services
#
# format:
# [name]
# caid=CAID[,CAID]...
# provid = provider ID[,provider ID]...
# srvid = service ID[,service ID]...



[skyhd-mapping]
caid=1834
provid=000000
srvid=0000,0071,0072,0081,0082,0083,0084,006f,0070


[KabelDeutschland-HD-mapping]
caid=1722,1834
provid=000000
srvid=0000,C351,C352,C353,C354,C355,C356,C357,C358,C359,C362,C363,C365,C35A,C35F,C364,C366,C35B,C35C,C35D,C360,C367,C368






[privat_hd]
caid=1834,1722,09C7,1861,1801
provid=000000,000401
srvid=C359,C35F,C362,C365,C363,C35A,C356,C352,C351,C357,C358,C355,C353,C354,C364,C366,C361,C360,C367,C368,C371,C373,C37F,CF16,C370

Spoiler

Leerzeichen vor und hinter dem "=" müßen bleiben.

So soll es aussehen:
[webif]
httpport = 8888
httpuser = myusername
httppwd = mypassword

Hab das gemacht, wenn ich jetzt in Oscam WebIF will sagt er "Access denied" 403 Forbidden. oO

Eventuell sollte ich die services in oscam.user neu ordnen nach dem Schema hier im Board: also Premium HD, Premiun extra usw.
Dann die Services nochmal neu machen?

Okay, habe jetzt Newnigma 2 neu aufgesetzt:


Soweit alles schick, habe jetzt Oscam 1.20 (manuell installiert) und das neueste CCCam. Habe als EMU jetzt CCCam/OSCam laufen. Allerdings habe ich kein oscam.conf in tuxbox
Wenn ich diese über den Feed lade, fehlt mir oscam.services und oscam.srvid

 

[4gx35]

AW: Oscam + CCcam auf Newnigma2 installieren

dann solltest du die easy configs aus post 2 nehmen
und nur oscam allein laufen lassen ohne cccam, etwas lesen hilft

 

[Cashmaster]

AW: Oscam + CCcam auf Newnigma2 installieren

Ich muss aber cccam und oscam laufen lassen weil ich share und empfange

 

[4gx35]

AW: Oscam + CCcam auf Newnigma2 installieren

dann musst du erst recht mal die anleitung und einleitung lesen, oscam reicht

 

[dodo83]

AW: SRVID und SERVICES weg

Wenn ich diese über den Feed lade, fehlt mir oscam.services und oscam.srvid

diese kannst du doch ganz einfach über das WebIF einrichten
FILES -> oscam.services, gewünschten inhalt einfügen, unten speichern und oscam neu starten, jetzt kannst du die services im reader definieren
per WebIF werden die dateien unter dem richtigen pfad abgespeichert

EDIT
@Cashmaster
hab deine Posts aus dem Anderen Thread auch hierhin verschoben da Du da das gleiche fragst
bitte benutze einen Thread wenn es um ein Thema geht
danke

 

[Cashmaster]

AW: SRVID und SERVICES weg

Hallo,

ist ja anderes Thema, habe jetzt mit ner anderen Box Newnigma neu aufgesetzt. Mit der Box die rennt komm ich immernoch nicht alle hell geschweige denn in Oscam web if.
So zum neuen Thema:

Habe mich jetzt 4 Stunden rumgeschlagen und es so eingetragen wie beschrieben (In der Anleitung).
Leider sind nur die normalen KD Sender hell, also die unverschlüsselten.
Ich empfange Sky und liefere KD.

Bei den Usern beide eingetragen, bei Sky meine Daten eingetragen...leider auch nichts hell.
Wie genau trage ich meine C-Line in den reader ein (und wo kommt das Passwort hin)?
Warum werden mir die anderen User als offline angezeigt und im Status steht error.

Habe eine Dreambox DM 500 HD mit Newnigma 2 und der neuen Oscam Version aus deinem Thread.

 

[Cashmaster]

AW: SRVID und SERVICES weg

Alles so gemacht wie bei 4gx35 Anleitung

Leider alles offline, reader und user ich poste mal den log und die files (aus OScam WebIF), sitze schon den ganzen Tag dran...

log.file

Spoiler

>> OSCam << cardserver started at Fri Apr 25 22:44:04 2014-------------------------------------------------------------------------------
2014/04/25 22:44:04 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9669 (mipsel-unknown-linux-gnu)
2014/04/25 22:44:04 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3549
2014/04/25 22:44:04 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/04/25 22:44:04 0 s userdb reloaded: 4 accounts loaded, 0 expired, 2 disabled
2014/04/25 22:44:04 0 s signal handling initialized
2014/04/25 22:44:04 0 s cccam: initialized (fd=5, port=12000)
2014/04/25 22:44:04 0 s d02 [internal] creating thread for device /dev/sci0
2014/04/25 22:44:04 0 s sky/gila [cccam] creating thread for device 3agle3ye.dyndns.org
2014/04/25 22:44:04 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/04/25 22:44:04 0 s waiting for local card init
2014/04/25 22:44:04 AFEFA0 p sky/gila configuration error!
2014/04/25 22:44:04 AFEFA0 p sky/gila [cccam] proxy initialized, server 3agle3ye.dyndns.org:0
2014/04/25 22:44:04 ACEC28 h webif: decompressed 151104 bytes back into 367968 bytes
2014/04/25 22:44:04 ACEC28 h HTTP Server running. ip=0.0.0.0 port=17000
2014/04/25 22:44:04 AFD2C0 r d02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2014/04/25 22:44:05 AFD2C0 r d02 [internal] card detected
2014/04/25 22:44:08 AFD2C0 r d02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/04/25 22:44:08 AFD2C0 r d02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/04/25 22:44:08 AFD2C0 r d02 [internal] Calculated work ETU is 151.63 us reader mhz = 368
2014/04/25 22:44:08 AFD2C0 r d02 [internal] ATR Fsmax is 6 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/04/25 22:44:09 AFD2C0 r d02 [internal] detect irdeto tunneled nagra card
2014/04/25 22:44:09 AFD2C0 r d02 [internal] no rsa key configured -> using irdeto mode
2014/04/25 22:44:09 AFD2C0 r d02 [internal] detect irdeto card
2014/04/25 22:44:21 AFD2C0 r d02 [internal] card system not supported
2014/04/25 22:44:21 AFD2C0 r d02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/04/25 22:44:23 AFD2C0 r d02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/04/25 22:44:23 AFD2C0 r d02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/04/25 22:44:23 AFD2C0 r d02 [internal] Calculated work ETU is 101.09 us reader mhz = 368
2014/04/25 22:44:23 AFD2C0 r d02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/04/25 22:44:24 AFD2C0 r d02 [internal] detect irdeto tunneled nagra card
2014/04/25 22:44:24 AFD2C0 r d02 [internal] no rsa key configured -> using irdeto mode
2014/04/25 22:44:24 AFD2C0 r d02 [internal] detect irdeto card
2014/04/25 22:44:33 AFD2C0 r d02 [internal] card system not supported
2014/04/25 22:44:33 AFD2C0 r d02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/04/25 22:44:33 AFD2C0 r d02 [internal] card initializing error
2014/04/25 22:44:34 0 s init for all local cards done
2014/04/25 22:44:34 0 s anti cascading disabled
2014/04/25 22:44:34 B0C0E0 c plain dvbapi-client granted (serverbox, au=on (1 reader))
2014/04/25 22:44:34 B0C0E0 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/04/25 22:44:34 B0C0E0 c [DVBAPI] Receiver sends PMT command 3 for channel D17A
2014/04/25 22:44:34 B0C0E0 c [DVBAPI] Receiver wants to demux srvid D17A on adapter 0000 camask 0008 index 0003 pmtpid 0066
2014/04/25 22:44:34 B0C0E0 c Found 0 ECMpids and 5 STREAMpids in PMT
2014/04/25 22:44:34 B0C0E0 c [DVBAPI] Receiver wants to demux srvid D17A on adapter 0000 camask 0008 index 0003 pmtpid 0066
2014/04/25 22:44:34 B0C0E0 c New program number: D17A (FFFE17A unknown) [pmt_list_management 3]
2014/04/25 22:47:30 B0C0E0 c [DVBAPI] Receiver sends PMT command 3 for channel D0A3
2014/04/25 22:47:30 B0C0E0 c [DVBAPI] Receiver wants to demux srvid D0A3 on adapter 0000 camask 0008 index 0003 pmtpid 006D
2014/04/25 22:47:30 B0C0E0 c [ADD PID 0] CAID: 1722 ECM_PID: 08A9 PROVID: 000000
2014/04/25 22:47:30 B0C0E0 c [ADD PID 1] CAID: 1834 ECM_PID: 08AA PROVID: 000000
2014/04/25 22:47:30 B0C0E0 c [ADD PID 2] CAID: 09C7 ECM_PID: 08AB PROVID: 000000
2014/04/25 22:47:30 B0C0E0 c [ADD PID 3] CAID: 1861 ECM_PID: 08A7 PROVID: 000000
2014/04/25 22:47:30 B0C0E0 c Found 4 ECMpids and 2 STREAMpids in PMT
2014/04/25 22:47:30 B0C0E0 c [DVBAPI] Receiver wants to demux srvid D0A3 on adapter 0000 camask 0008 index 0003 pmtpid 006D
2014/04/25 22:47:30 B0C0E0 c New program number: D0A3 (17220A3 unknown) [pmt_list_management 3]
2014/04/25 22:47:30 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:30 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/04/25 22:47:30 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:31 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/04/25 22:47:30 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:30 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/04/25 22:47:31 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:31 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/04/25 22:47:31 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:31 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/04/25 22:47:32 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:32 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/04/25 22:47:32 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:32 B0C0E0 c [DVBAPI] Receiver sends PMT command 3 for channel D04C
2014/04/25 22:47:32 B0C0E0 c [DVBAPI] Receiver wants to demux srvid D04C on adapter 0000 camask 0008 index 0003 pmtpid 0070
2014/04/25 22:47:32 B0C0E0 c Found 0 ECMpids and 3 STREAMpids in PMT
2014/04/25 22:47:32 B0C0E0 c [DVBAPI] Receiver wants to demux srvid D04C on adapter 0000 camask 0008 index 0003 pmtpid 0070
2014/04/25 22:47:32 B0C0E0 c New program number: D04C (FFFE04C unknown) [pmt_list_management 3]
2014/04/25 22:47:35 B0C0E0 c [DVBAPI] Receiver sends PMT command 3 for channel C362
2014/04/25 22:47:35 B0C0E0 c [DVBAPI] Receiver wants to demux srvid C362 on adapter 0000 camask 0008 index 0003 pmtpid 0067
2014/04/25 22:47:35 B0C0E0 c [ADD PID 0] CAID: 09C7 ECM_PID: 1AF3 PROVID: 000000
2014/04/25 22:47:35 B0C0E0 c [ADD PID 1] CAID: 1834 ECM_PID: 1AF2 PROVID: 000000
2014/04/25 22:47:35 B0C0E0 c [ADD PID 2] CAID: 1861 ECM_PID: 1AEF PROVID: 000000
2014/04/25 22:47:35 B0C0E0 c Found 3 ECMpids and 4 STREAMpids in PMT
2014/04/25 22:47:35 B0C0E0 c [DVBAPI] Receiver wants to demux srvid C362 on adapter 0000 camask 0008 index 0003 pmtpid 0067
2014/04/25 22:47:35 B0C0E0 c New program number: C362 (09C7:C362 unknown) [pmt_list_management 3]
2014/04/25 22:47:35 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:35 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/04/25 22:47:35 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:35 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/04/25 22:47:35 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:36 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/04/25 22:47:36 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:36 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/04/25 22:47:37 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:37 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/04/25 22:47:37 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:38 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/04/25 22:47:38 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:38 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/04/25 22:47:38 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:39 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/04/25 22:47:39 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:39 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/04/25 22:47:40 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:40 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/04/25 22:47:40 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:41 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/04/25 22:47:41 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:41 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/04/25 22:47:41 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:42 B0C0E0 c [DVBAPI] Receiver sends PMT command 3 for channel C35B
2014/04/25 22:47:42 B0C0E0 c [DVBAPI] Receiver wants to demux srvid C35B on adapter 0000 camask 0008 index 0003 pmtpid 0069
2014/04/25 22:47:42 B0C0E0 c [ADD PID 0] CAID: 09C7 ECM_PID: 19EF PROVID: 000000
2014/04/25 22:47:42 B0C0E0 c [ADD PID 1] CAID: 1861 ECM_PID: 19EB PROVID: 000000
2014/04/25 22:47:42 B0C0E0 c Found 2 ECMpids and 4 STREAMpids in PMT
2014/04/25 22:47:42 B0C0E0 c [DVBAPI] Receiver wants to demux srvid C35B on adapter 0000 camask 0008 index 0003 pmtpid 0069
2014/04/25 22:47:42 B0C0E0 c New program number: C35B (09C7:C35B unknown) [pmt_list_management 3]
2014/04/25 22:47:42 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:42 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/04/25 22:47:42 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:42 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/04/25 22:47:43 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:43 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/04/25 22:47:43 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:44 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/04/25 22:47:44 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:44 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/04/25 22:47:44 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:45 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/04/25 22:47:45 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:45 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/04/25 22:47:46 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:46 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/04/25 22:47:46 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:47 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/04/25 22:47:47 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:47 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/04/25 22:47:47 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:48 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/04/25 22:47:48 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:48 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/04/25 22:47:49 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:49 B0C0E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/04/25 22:47:49 B0C0E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/04/25 22:47:50 B0C0E0 c [DVBAPI] Receiver sends PMT command 3 for channel D161
2014/04/25 22:47:50 B0C0E0 c [DVBAPI] Receiver wants to demux srvid D161 on adapter 0000 camask 0008 index 0003 pmtpid 0065
2014/04/25 22:47:50 B0C0E0 c Found 0 ECMpids and 6 STREAMpids in PMT
2014/04/25 22:47:50 B0C0E0 c [DVBAPI] Receiver wants to demux srvid D161 on adapter 0000 camask 0008 index 0003 pmtpid 0065
2014/04/25 22:47:50 B0C0E0 c New program number: D161 (FFFE161 unknown) [pmt_list_management 3]

oscam.version

Spoiler

Unix starttime: 1398458644Starttime: 25.04.2014 22:44:04
Version: oscam-1.20-unstable_svn-r9669
Compiler: mipsel-unknown-linux-gnu
ConfigDir: /etc/tuxbox/config/


Web interface support: yes
LiveLog support: no
jQuery support intern: no
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
DVB API with Samsung TV support: no
Anti-cascading support: yes
Irdeto guessing: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
IPv6 support: no
Clockfix with realtime clock: no
Cache exchange support: yes


camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
Pandora: no
ghttp: no
gbox: yes
radegast: yes
serial: no
constant CW: yes


Reader support: yes


Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes


cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stinger: yes

oscam.conf

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9669# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 256
preferlocalcards = 1
ecmfmt = c/s/l


[cache]


[cccam]
port = 12000
nodeid = 4DD59B4610FF1546
version = 2.3.0
reshare = 1


[dvbapi]
enabled = 1
au = 1
user = serverbox
boxtype = dreambox


[webif]
httpport = 17000
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
aulow = 120

oscam.user

Spoiler

[account]user = serverbox
pwd = passwort
keepalive = 1
au = d02
betatunnel = 1834.FFFF:1722
group = 1,2
cccignorereshare = 0


[account]
disabled = 1
user = client1
pwd = pass1
uniq = 3
keepalive = 1
betatunnel = 1834.FFFF:1722
group = 1,2
cccreshare = 0
cccignorereshare = 0


[account]
disabled = 1
user = client2
pwd = pass2
uniq = 3
keepalive = 1
betatunnel = 1834.FFFF:1722
group = 1,2
cccreshare = 0
cccignorereshare = 0


[account]
user = XXXXXX
pwd = XXXXXXX
uniq = 3
keepalive = 1
au = d02
betatunnel = 1834.FFFF:1722
group = 1
cccreshare = 0
cccignorereshare = 0

oscam.server

Spoiler

[reader]label = reader0
description = S02-Sat
enable = 0
protocol = cccam
device = 127.0.0.1,12000
caid = 1722,1834
group = 1
emmcache = 1,1,2


[reader]
label = hd01
description = HD+weiss
enable = 0
protocol = internal
device = /dev/sci1
caid = 1830
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,1,2


[reader]
label = hd02
description = HD+schwarz
enable = 0
protocol = internal
device = /dev/sci1
caid = 1843
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,1,2


[reader]
label = v13
description = V13-Sky
enable = 0
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
emmcache = 1,1,2
ndsversion = 2


[reader]
label = v14
description = V14-Sky
enable = 0
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
boxkey = 1122334455667788
ins7e11 = 15
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2
ndsversion = 2


[reader]
label = orfice
description = ORF-Ice
enable = 0
protocol = internal
device = /dev/sci1
caid = 0648
boxid = 12345678
force_irdeto = 1
detect = cd
mhz = 600
cardmhz = 600
group = 2
emmcache = 1,1,2


[reader]
label = i12
description = i12-Unitymedia
enable = 0
protocol = internal
device = /dev/sci0
caid = 1722,1835
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2

oscam.services

Spoiler

# oscam.services generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9669# Read more:

Sie müssen registriert sein, um Links zu sehen.

[newservice1]
caid =
provid =
srvid =


[newservice2]
caid = 09C7,1722,1834,1801,1861
provid = 000401,000000
srvid = C35F,C362,C359,C363,C35A,C365,C35B,C35C,C35D,C36C,C36D,C37B,C37D,C36F,C372