Smargo an Futro S400 mit UM02 Karte

[maxiking32]

AW: Smargo an Futro S400 mit UM02 Karte

oscam.server

Spoiler

[reader]
label = um02
Protocol = smartreader
Device = SerialC92177
caid = 1838
boxkey = A76sorry7C
rsakey = BsorryFF
detect = cd
mhz = 368
cardmhz = 368
ident = 1838:000000
group = 1
emmcache = 1,1,2
lb_weight = 300

 

[Hailogugo]

AW: Smargo an Futro S400 mit UM02 Karte

Was muss an der stelle von dem Smile?

 

[maxiking32]

AW: Smargo an Futro S400 mit UM02 Karte

: D ohne leerzeichen

 

[Hailogugo]

AW: Smargo an Futro S400 mit UM02 Karte

ja habe ich gesehen
tut nicht
folgendes in der log datei

Spoiler

2014/03/18 20:30:42 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 6786
2014/03/18 20:30:42 0 s services reloaded: 0 services freed, 18 services loaded, rejected 0
2014/03/18 20:30:42 0 s userdb reloaded: 26 accounts loaded, 0 expired, 0 disabled
2014/03/18 20:30:42 0 s signal handling initialized
2014/03/18 20:30:42 0 s 231 service-id's loaded in 2ms
2014/03/18 20:30:42 0 s cs378x: initialized (fd=3, port=13003)
2014/03/18 20:30:42 0 s newcamd: initialized (fd=4, port=13001)
2014/03/18 20:30:42 0 s -> CAID: 1838 PROVID: 000000
2014/03/18 20:30:42 0 s cccam: initialized (fd=5, port=13000)
2014/03/18 20:30:42 0 s Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!



2014/03/18 20:31:42 8AFF758 r um02 [smartreader] De SR_init
2014/03/18 20:31:42 8AFF758 r um02 [smartreader] initing smargo type SR
2014/03/18 20:31:42 8AFF758 r um02 [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2014/03/18 20:31:42 8AFF758 r Smartreader device SerialC92177 not found
2014/03/18 20:31:42 8AFF758 r um02 [smartreader] Cannot open device: SerialC92177
2014/03/18 20:30:42 0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2014/03/18 20:30:42 0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2014/03/18 20:30:42 0 s Binary without Griffin module - no EMM processing for Griffin possible!
2014/03/18 20:30:42 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2014/03/18 20:30:42 0 s um02 [smartreader] creating thread for device SerialC92177
2014/03/18 20:30:42 0 s anti cascading log initialized
2014/03/18 20:30:42 8AFF758 r um02 [smartreader] De SR_init
2014/03/18 20:30:42 8AFF758 r um02 [smartreader] initing smargo type SR
2014/03/18 20:30:42 8AFF758 r um02 [smartreader] Using 0x01/0x82 as endpoint for

 

[maxiking32]

AW: Smargo an Futro S400 mit UM02 Karte

Der kann komischer weise den Reader nicht finden


Sent from my iPhone using Tapatalk

 

[Hailogugo]

AW: Smargo an Futro S400 mit UM02 Karte

Habe jetzt mal nicht mit der id sondern mit USB0 versucht

kommt dann folgendes:

Spoiler

2014/03/18 20:39:27 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 7561
2014/03/18 20:39:27 0 s services reloaded: 0 services freed, 18 services loaded, rejected 0
2014/03/18 20:39:27 0 s userdb reloaded: 26 accounts loaded, 0 expired, 0 disabled
2014/03/18 20:39:27 0 s signal handling initialized
2014/03/18 20:39:27 0 s 231 service-id's loaded in 2ms
2014/03/18 20:39:27 0 s cs378x: initialized (fd=3, port=13003)
2014/03/18 20:39:27 0 s newcamd: initialized (fd=4, port=13001)
2014/03/18 20:39:27 0 s -> CAID: 1838 PROVID: 000000
2014/03/18 20:39:27 0 s cccam: initialized (fd=5, port=13000)
2014/03/18 20:39:27 0 s Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2014/03/18 20:39:27 0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2014/03/18 20:39:27 0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2014/03/18 20:39:27 0 s Binary without Griffin module - no EMM processing for Griffin possible!
2014/03/18 20:39:27 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2014/03/18 20:39:27 0 s um02 [smartreader] creating thread for device /dev/ttyUSB0
2014/03/18 20:39:27 0 s anti cascading log initialized
2014/03/18 20:39:27 8AFF758 r um02 [smartreader] De SR_init
2014/03/18 20:39:27 8AFF758 r um02 [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
2014/03/18 20:39:27 8AFF758 r um02 [smartreader] Cannot open device: /dev/ttyUSB0
2014/03/18 20:39:27 8B071D8 h webif: decompressed 72296 bytes back into 200252 bytes
2014/03/18 20:39:27 8B071D8 h HTTP Server running. ip=0.0.0.0 port=3002
2014/03/18 20:39:30 8B1C930 c client connected to 13001 port

- - - - - - - - - -

Und den Smargo habe ich jetzt durch hin und her mit mehreren verschiedenen Settingsprogrammen so:

Spoiler

smartreader+ version v1.5
MODE autoswitch
FREQ inf Mhz
KERNEL normal
T_MODE t = 1
EGT 0

 

[czutok]

AW: Smargo an Futro S400 mit UM02 Karte

naja , die ip adresen und namen von deinen klienten köntest du auch schon entfernen :emoticon-0179-headb

nicht jeder mus wisen das es deine CS partner sind

 

[Hailogugo]

AW: Smargo an Futro S400 mit UM02 Karte

3x drüber geguck und noch übersehen.

 

[maxiking32]

AW: Smargo an Futro S400 mit UM02 Karte

Also der Reader kann anschien end nicht gefunden werden, da er immer sagt cant Open device
Probier mal nen anderen USB-Port!

Sent from my iPhone using Tapatalk

 

[Hailogugo]

AW: Smargo an Futro S400 mit UM02 Karte

Andere USB Ports habe ich auch versucht.

Aber Danke an allen. Ich bin jetzt doch zur Easymouse gewechselt und habe folgene Einstellungen gewählt:

[reader]
label = um02
protocol = mouse
device = /dev/ttyUSB0
caid = 1838
boxkey = A............C
rsakey = B..........F
detect = cd
cardmhz = 368
ident = 1838:000000
group = 1
emmcache = 1,1,2
lb_weight = 300
services = um

Einstellungen an der Easymouse wie hier:

https://www.digital-eliteboard.com/showthread.php?224793-Smartmouse-Easymouse-2-Konfigurationen