Sky V13 - Entitlements abgelaufen, was tun?

[czutok]

AW: Sky V13 - Entitlements abgelaufen, was tun?

bei dir steht au 0 , und solte aktiv stehen , so wie ich es oben eingefügt habe

du hast irgend wo ein kleines problem im oscam cfg.

 

[Pommfriedel]

AW: Sky V13 - Entitlements abgelaufen, was tun?

du hast irgend wo ein kleines problem im oscam cfg.

Soweit war ich ja schon....

Aber wo ist es?

 

[czutok]

AW: Sky V13 - Entitlements abgelaufen, was tun?

ich bin kein oscam spezialist , da musen andere dran , sorry

 

[dodo83]

AW: Sky V13 - Entitlements abgelaufen, was tun?

dein User wird als "anonymous" angezeigt, heisst der DVBapi account wird dem DVBapi abschnitt nicht zugeordnet
der name des DVBapi users sollte in der oscam.conf als auch in der oscam.user gleich sein, am besten diesen lokal oder wie bei dir schon in der oscam.conf serverbox nennen

 

[Pommfriedel]

AW: Sky V13 - Entitlements abgelaufen, was tun?

Wo ist denn der Punkt beim Client?

Unter Configuration - Dvb-api ist bei beiden serverbox eingetragen, trotzdem kommt noch plain dvbapi-client granted (anonymous, au=off)

 

[Pilot]

AW: Sky V13 - Entitlements abgelaufen, was tun?

- im oscam.conf be bei [dvbapi] user = lokal
im oscam.user beim account user = lokal eintragen.
Also überall dort wo du user = dvbapi drin stehen hast.
Du brauchst bei oscam einen lokalen account, wenn der Server ein Receiver ist

 

[Pommfriedel]

AW: Sky V13 - Entitlements abgelaufen, was tun?

Der Server ist aber der Pi, nicht der Receiver.

Mich beschleicht das Gefühl, dass ich irgendwie eine unglückliche Doppelkonfiguration von davbapi und cccam habe... Kann das sein?

Also nochmal zum Verständnis: die Karte hängt am Pi mit IPC und der Triplex ist lokaler Client, der das AU machen soll. Entitlements sind seit 30.04. abgelaufen und am Client zeigt AU 0 statt ACTIVE. Die Ariva im Share sind ja nicht von Interesse.

Welche Configs soll ich euch nochmal zur Verfügung stellen, damit das AU wieder in die Gänge kommt?

 

[dodo83]

AW: Sky V13 - Entitlements abgelaufen, was tun?

poste mal komplette configs vom client (Triplex), oscam.conf,-.server,-.user
vom PI sind es doch die im erstem post?

 

[czutok]

AW: Sky V13 - Entitlements abgelaufen, was tun?

sagtest du Ariva ??

jungs , der ariva kann doch keine emms senden , oder teusche ich ich jetzt ??

 

[Pommfriedel]

AW: Sky V13 - Entitlements abgelaufen, was tun?

Die Ariva hängen nur zusätzlich im Share, die EMM sollten vom Triplex kommen. Alles entspannt, polnischer Padavan.....

Bin im Büro, liefere die Files heute Abend.

 

[laila-no1]

AW: Sky V13 - Entitlements abgelaufen, was tun?

Moin,

er hat doch den Triplex lokal bei ihm, der sollte ja Emms senden was ich weiss.
wie dodo schon schrieb komplette Configs vom Triplex, welche Oscamversion am Triplex usw.

lg, Laila

 

[Pommfriedel]

AW: Sky V13 - Entitlements abgelaufen, was tun?

So, nun aber. Die Triplex-Files.

.conf

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM ymodv18-t39 build #0# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
usrfile = /var/log/oscamuser.log
logfile = /var/log/oscam.log
cwlogdir = /var/log/cw
nice = -1
maxlogsize = 100
saveinithistory = 1
lb_nfb_readers = 3
lb_reopen_seconds = 200


[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 15
monlevel = 2
appendchaninfo = 0


[cccam]
port = 33333
reshare = 0
ignorereshare = 0
forward_origin_card = 0
version = 2.3.0
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0


[dvbapi]
enabled = 1
au = 1
boxtype = duckbox
user = serverbox
pmt_mode = 0
request_mode = 0


[webif]
httpport = 88
httphelplang = de
httprefresh = 30
httpallowed = 127.0.0.1,10.0.0.0-10.0.0.254,192.168.0.0-192.168.254.254
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

.user

Spoiler

#[account]
user = triplex
pwd = triplex
keepalive = 1
#au = s02,hd01,hd02,v13,v14,orfice,i12,um02,d02,d09,g0209,v23
au = 1
betatunnel = 1835.FFFF:1722
group = 1,2
cccignorereshare = 0


#[account]
#user = triplex
#pwd = triplex
#uniq = 3
#keepalive = 1
#betatunnel = 1835.FFFF:1722
#group = 1,2
#cccreshare = 0
#cccignorereshare = 0

.server

Spoiler

# oscam.server generated automatically by Streamboard OSCAM ymodv18-t39 build #0# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = sky_s02_a02_>slot_oben<
enable = 0
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
caid = 1702,1833
fix9993 = 0
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = sky_s02_a02_>slot_unten<
enable = 0
protocol = internal
device = /dev/sci1
key = 0102030405060708091011121314
caid = 1702,1833
fix9993 = 0
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = sky_v13_card_>slot_oben<
enable = 0
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
caid = 09C4
boxid = 12345678
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = sky_v13_card_>slot_unten<
enable = 0
protocol = internal
device = /dev/sci1
key = 0102030405060708091011121314
caid = 09C4
boxid = 12345678
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = sky_v14_card_>slot_oben<
enable = 0
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
caid = 098C
boxid = 12345678
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = sky_v14_card_>slot_unten<
enable = 0
protocol = internal
device = /dev/sci1
key = 0102030405060708091011121314
caid = 098C
boxid = 12345678
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = hdplus_weiss_hd01_>slot_oben<
enable = 0
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
caid = 1830
fix9993 = 0
rsakey = BF35xxxxxxxxxA4DD5
boxkey = A764xxxxxxx96D37C
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = hdplus_weiss_hd01_>slot_unten<
enable = 0
protocol = internal
device = /dev/sci1
key = 0102030405060708091011121314
caid = 1830
fix9993 = 0
rsakey = BF358xxxxxxxxxxxCA4DD5
boxkey = A7xxxxxxxx7C
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = hdplus_schwarz_hd02_>slot_oben<
enable = 0
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
caid = 1843
fix9993 = 0
rsakey = BF358xxxxxxxxxxxxxCA4DD5
boxkey = A76xxxxxxx37C
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = hdplus_schwarz_hd02_>slot_unten<
enable = 0
protocol = internal
device = /dev/sci1
key = 0102030405060708091011121314
caid = 1843
fix9993 = 0
rsakey = BF358xxxxxxxxxxxA4DD5
boxkey = A7xxxxxxxD37C
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = mtv_card_>slot_oben<
enable = 0
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
caid = 0B00
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = mtv_card_>slot_unten<
enable = 0
protocol = internal
device = /dev/sci1
key = 0102030405060708091011121314
caid = 0B00
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = srg_viaccess_card_>slot_oben<
enable = 0
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
caid = 0500
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = srg_viaccess_card_>slot_unten<
enable = 0
protocol = internal
device = /dev/sci1
key = 0102030405060708091011121314
caid = 0500
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = orf_card_cw_>slot_oben<
enable = 0
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
caid = 0D05
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = orf_card_cw_>slot_unten<
enable = 0
protocol = internal
device = /dev/sci1
key = 0102030405060708091011121314
caid = 0D05
fix9993 = 0
detect = cd
mhz = 500
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = orf_ice_card_irdeto_>slot_oben<
enable = 0
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
caid = 0648
fix9993 = 0
rsakey = 70FExxxxxxxxxxx09AC219
force_irdeto = 1
boxkey = 484xxxxx246
detect = cd
mhz = 357
cardmhz = 600
ident = 0648:000000
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = orf_ice_card_irdeto_>slot_unten<
enable = 0
protocol = internal
device = /dev/sci1
key = 0102030405060708091011121314
caid = 0648
fix9993 = 0
rsakey = 70FEA1xxxxxxxxxxxxxxxC219
force_irdeto = 1
boxkey = 4845xxxxxxx4F5246
detect = cd
mhz = 357
cardmhz = 600
ident = 0648:000000
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = kabelbw_v23_>slot_oben<
enable = 0
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
caid = 098E
boxid = 12345678
fix9993 = 0
detect = cd
mhz = 368
cardmhz = 368
group = 2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = kabelbw_v23_>slot_unten<
enable = 0
protocol = internal
device = /dev/sci1
key = 0102030405060708091011121314
caid = 098E
boxid = 12345678
fix9993 = 0
detect = cd
mhz = 368
cardmhz = 368
group = 1
blockemm-unknown = 1
lb_weight = 100




[reader]
label = um02_card_>slot_oben<
enable = 0
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
caid = 1838
fix9993 = 0
rsakey = B55Exxxxxxxxx367FF
boxkey = A7xxxxxxx37C
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = um02_card_>slot_unten<
enable = 0
protocol = internal
device = /dev/sci1
key = 0102030405060708091011121314
caid = 1838
fix9993 = 0
rsakey = B55E0Exxxxxxxxxxxxx367FF
boxkey = A76xxxxxxxxxxxC
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100




[reader]
label = cccam_server_1
enable = 1
protocol = cccam
device = 192.168.1.199,33333
key = 0102030405060708091011121314
user = triplex
password = triplex
services = sky_09c4_all,sky_098c_all,sky_1702_all,sky_1833_all,sky_1722_all,sky_1834_all,sky_starter,sky_welt,sky_film,sky_film_hd,sky_bundesliga,sky_bundesliga_or_sport_hd
inactivitytimeout = 1
reconnecttimeout = 8073448
fix9993 = 0
group = 1
lb_weight = 100
cccversion = 2.3.0
cccmaxhops = 10
cccmindown = 0
ccckeepalive = 1




[reader]
label = newcamd_server_1
enable = 0
protocol = newcamd
device = blablabla.dyndns.org,66666
key = 0102030405060708091011121314
user = user
password = password
reconnecttimeout = 8073448
fix9993 = 0
group = 4
lb_weight = 100




[reader]
label = emulator
enable = 0
protocol = camd35
device = 127.0.0.1,54321
key = 0102030405060708091011121314
user = emu
password = emu
reconnecttimeout = 8073448
caid = 0D05
fix9993 = 0
group = 5
lb_weight = 100

 

[dodo83]

AW: Sky V13 - Entitlements abgelaufen, was tun?

hi,
du solltest zu dem DVBapi User

Spoiler

[COLOR=#3E3E3E][dvbapi][/COLOR]
[COLOR=#3E3E3E]enabled = 1[/COLOR]
[COLOR=#3E3E3E]au = 1[/COLOR]
[COLOR=#3E3E3E]boxtype = duckbox[/COLOR]
[COLOR=#3E3E3E]user = serverbox[/COLOR]
[COLOR=#3E3E3E]pmt_mode = 0[/COLOR]
[COLOR=#3E3E3E]request_mode = 0[/COLOR]

den passenden account in der oscam.user haben, hast du nicht, zudem hast du den [account] mit einem "#" auskommentiert

Spoiler

[COLOR=#3E3E3E][account][/COLOR]
[COLOR=#3E3E3E]user = serverbox[/COLOR]
[COLOR=#3E3E3E]pwd = [/COLOR]
[COLOR=#3E3E3E]au = 1[/COLOR]
[COLOR=#3E3E3E]group = 1,2[/COLOR]

die anderen lösch bitte erstmal und den einfügen

zudem solltest du mal die ganzen überflüssigen reader löschen, da blickt doch keiner durch
schätze mal das dieser der richtige ist
bereinigen, services reicht wenn du am server verwendest

Spoiler

[COLOR=#3E3E3E][reader][/COLOR]
[COLOR=#3E3E3E]label = cccam_server_1[/COLOR]
[COLOR=#3E3E3E]enable = 1[/COLOR]
[COLOR=#3E3E3E]protocol = cccam[/COLOR]
[COLOR=#3E3E3E]device = 192.168.1.199,33333[/COLOR]
[COLOR=#3E3E3E]user = triplex[/COLOR]
[COLOR=#3E3E3E]password = triplex[/COLOR]
[COLOR=#3E3E3E]inactivitytimeout = 30[/COLOR]
[COLOR=#3E3E3E]group = 1[/COLOR]
[COLOR=#3E3E3E]cccversion = 2.3.0[/COLOR]
[COLOR=#3E3E3E]cccmaxhops = 10[/COLOR]
[COLOR=#3E3E3E]cccmindown = 0[/COLOR]
[COLOR=#3E3E3E]ccckeepalive = 1[/COLOR]

EDIT
wenn du schon alle Reader postest dann bitte die RSA/BOXKEY´s ausiXXXen
das posten dieser ist nicht erlaubt

 

[Pommfriedel]

AW: Sky V13 - Entitlements abgelaufen, was tun?

So, okay. Jetzt gibt's einen Timeout...

Spoiler

2014/05/03 10:12:27 1838 2BF194C8 c dvbapi: [ADD PID 0] CAID: 1833 ECM_PID: 180F PROVID: 000000
2014/05/03 10:12:27 1838 2BF194C8 c dvbapi: [ADD PID 1] CAID: 09C4 ECM_PID: 1B0F PROVID: 000000
2014/05/03 10:12:27 1838 2BF194C8 c dvbapi: [ADD PID 2] CAID: 09AF ECM_PID: 1F0F PROVID: 000000
2014/05/03 10:12:27 1838 2BF194C8 c dvbapi: [ADD PID 3] CAID: 098C ECM_PID: 1A0F PROVID: 000000
2014/05/03 10:12:27 1838 2BF194C8 c dvbapi: new program number: 006C (Sky Sport News HD)
2014/05/03 10:12:32 1838 2BF194C8 c serverbox (1833&000000/006C/180F/0000/89:916B/00-00): timeout (5020 ms) by cccam_server_1 (try 2)
2014/05/03 10:12:32 1838 2BF194C8 c serverbox (09C4&000000/006C/1B0F/0000/B3:4F54/00-00): rejected reader peer (144 ms) by cccam_server_1
2014/05/03 10:12:32 1838 2BF194C8 c serverbox (09AF&000000/006C/1F0F/0000/92:E19F/00-00): rejected group (1 ms) (no matching reader)

EDIT: Danke für's xxx'en, hatte ich übersehen

 

[dodo83]

AW: Sky V13 - Entitlements abgelaufen, was tun?

verbunden zum server bist du?
am Triplex im webIF steht CONNECTED ( 1of1 cards )?
hast du noch eine oscam.dvbapi am Triplex angelegt oder eine oscam.whitelist?
welche oscam version läuft am Triplex?