Salidos Vavoo Script für Enigma2

[Osprey]

Kommst du per Browser auf das Webinterface drauf?

 

[marzi]

ja mit der receiver ip
Bouquetmakerxtream bleibt dann bei looding stehen und nix geht mehr

 

[Humanacces]

Bei mir lief es so ab , da ich mit Bouqetmakerxtream keine Playlist öffnen konnte.

1.Ipk installiert ,bis zur Meldung Konfiguriere ,dann ging ich es nicht weiter

2.Box musste ich ausschalten,also Neustart.

3.In den Erweiterungen vavoo starten angewählt (wurde also installiert ohne Meldung)

4.Im Browser die IP ( also meine box:4355) aufgerufen und User / Passwort eingegeben

5.Region Einstellungen vorgenommen ( DE )

6. M3u Liste in "ect/enigma2/bouquetmakerxtream" mit Ajpanel geöffnet und alle Sender laufen.

Wenn man Bouqets haben möchte kann man das auch mit AJpanel erstellen.
Warum es nicht mit Bouquetmaker ging , weiß ich nicht...!!

Open ATV 7.6 Giga4K Quad +

 

[marzi]

jetzt sind die bougets in ect/enigma2/bouquetmakerxtream drin
Kann leider über den bouquetmakerxtream keine bouquet erzeugen

 

[Osprey]

Die /etc/boquetmakerxtream/playlist.txt bleibt leer. Die erstellten m3u kommen in den Hauptordner /etc/bouquetmakerxtream/ und von dort können die auch geladen werden. Weshalb das bei euch nicht angezeigt wird, weiß ich leider nicht. Ich habe es auf meiner bree2ze4k mit neuen HDF und ATV ohne Probleme angezeigt bekommen. DNS auf 1.1.1.1 und ipv6 deaktiviert.

Couldn't find anything to satisfy 'python3-pycryptodomex'.
error: opkg_solver_install: No candidates to install python3-pycryptodomex (null)!

Das letzte ATV 7.6 das ich installiert habe, hat gemeckert das pycryptodomex gebraucht wird und hab es deshalb mit als depends rein. Kann dir morgen gerne ein ipk ohne erforderliche pycryptodomex erstellen.

 

[parabolic]

Ein externer Server ist glaube ich die bessere Wahl. E2 ist für IPTV nur bedingt geeignet und jedes Netzwerkproblem führt häufig zu Hängern oder Abstützen. Die Playlist auf dei Box kopieren und mit m3u bouquet converter einfügem läuft stabiler. Die letzte Version von @salidos läuft so bei mir sehr zufriedenstellend.

 

[klaus333]

@ Osprey
Also ich habe versucht es auf einer Vuplus Zero mit OpenATV 7.6 zu installieren und bekomme diese Fehlermeldung.

 

[Osprey]

Das neue ipk 1.4.2 kommt ohne pycryptodomex und läuft auch auf OpenPli.
Hier nochmals Vorgehensweise:
- ipk entpacken und nach /tmp auf den Receiver schieben
dann das eingeben

opkg install /tmp/*.ipk

Log sollte so aussehen

Spoiler: Install log

root@hd51:# opkg install /tmp/*.ipk
Installing wget (1.21.1) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/wget_1.21.1-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing gstplayer (0.1) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/gstplayer_0.1-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing uchardet (0.0.7) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/uchardet_0.0.7-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-tkinter (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-tkinter_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-mailbox (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-mailbox_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-idle (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-idle_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-smtpd (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-smtpd_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-syslog (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-syslog_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-multiprocessing (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-multiprocessing_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-xmlrpc (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-xmlrpc_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-terminal (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-terminal_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-venv (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-venv_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-sqlite3 (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-sqlite3_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-image (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-image_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-profile (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-profile_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-resource (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-resource_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-doctest (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-doctest_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libtiff5 (4.2.0) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libtiff5_4.2.0-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-chardet (4.0.0) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-chardet_4.0.0-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-ndg-httpsclient (0.5.1) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-ndg-httpsclient_0.5.1-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-pysocks (1.7.1) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-pysocks_1.7.1-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libavutil56 (4.4.3) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libavutil56_4.4.3-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libbluray (1.3.4-12-g236b5c8f) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libbluray_1.3.4-12-g236b5c8f-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libssh2-1 (1.9.0) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libssh2-1_1.9.0-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libpanelw5 (6.2) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libpanelw5_6.2-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-certifi (2020.12.5) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-certifi_2020.12.5-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libx264-161 (r3039+git0+544c61f082) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libx264-161_r3039+git0+544c61f082-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libgdbm6 (1.19) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libgdbm6_1.19-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libudev1 (3.2.10) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libudev1_3.2.10-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing lcms (2.12) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/lcms_2.12-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libpostproc55 (4.4.3) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libpostproc55_4.4.3-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libavresample4 (4.4.3) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libavresample4_4.4.3-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libswscale5 (4.4.3) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libswscale5_4.4.3-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libswresample3 (4.4.3) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libswresample3_4.4.3-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libcurl4 (7.75.0) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libcurl4_7.75.0-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-curses (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-curses_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-urllib3 (1.26.5) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-urllib3_1.26.5-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libgdbm-compat4 (1.19) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libgdbm-compat4_1.19-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libv4l (1.20.0) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libv4l_1.20.0-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing openjpeg (2.4.0) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/openjpeg_2.4.0-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libavfilter7 (4.4.3) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libavfilter7_4.4.3-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libavcodec58 (4.4.3) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libavcodec58_4.4.3-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing curl (7.75.0) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/curl_7.75.0-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-requests (2.25.1) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-requests_2.25.1-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-db (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-db_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing media-ctl (1.20.0) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/media-ctl_1.20.0-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-pillow (8.2.0) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-pillow_8.2.0-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libavformat58 (4.4.3) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libavformat58_4.4.3-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing python3-modules (3.9.9) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/python3-modules_3.9.9-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing libavdevice58 (4.4.3) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/libavdevice58_4.4.3-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing enigma2-plugin-extensions-bouquetmakerxtream (219+879dfd8) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/all/enigma2-plugin-extensions-bouquetmakerxtream_219+879dfd8-r0.0_all.ipk.
Installing ffmpeg (4.4.3) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/ffmpeg_4.4.3-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing exteplayer3 (69+gitr136+e258b47) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neon-vfpv4/exteplayer3_69+gitr136+e258b47-r0.0_cortexa15hf-neon-vfpv4.ipk.
Installing enigma2-plugin-systemplugins-serviceapp (1+git176+947f62e) on root
Downloading http://downloads.openpli.org/feeds/openpli-9-release/hd51/enigma2-plugin-systemplugins-serviceapp_1+git176+947f62e-r0.103_hd51.ipk.
Installing enigma2-plugin-settings-vavoo-e2 (1.4.1) on root
Configuring libtiff5.
Configuring lcms.
Configuring python3-tkinter.
Configuring libx264-161.
Configuring wget.
update-alternatives: Linking /usr/bin/wget to /usr/bin/wget.wget
Configuring gstplayer.
Configuring libavutil56.
Configuring libswresample3.
Configuring libavcodec58.
Configuring libbluray.
Configuring libavformat58.
Configuring libswscale5.
Configuring libavfilter7.
Configuring libudev1.
Configuring media-ctl.
Configuring libv4l.
Configuring libavdevice58.
Configuring python3-mailbox.
Configuring python3-idle.
Configuring libgdbm6.
Configuring libgdbm-compat4.
Configuring python3-db.
Configuring libpanelw5.
Configuring python3-curses.
Configuring python3-doctest.
Configuring python3-image.
Configuring python3-multiprocessing.
Configuring python3-profile.
Configuring python3-resource.
Configuring python3-smtpd.
Configuring python3-sqlite3.
Configuring python3-syslog.
Configuring python3-terminal.
Configuring python3-venv.
Configuring python3-xmlrpc.
Configuring python3-modules.
Configuring openjpeg.
Configuring python3-pillow.
Configuring python3-chardet.
Configuring python3-ndg-httpsclient.
update-alternatives: Linking /usr/bin/ndg_httpclient to /usr/bin/ndg_httpclient.python3-ndg-httpsclient
Configuring python3-pysocks.
Configuring python3-certifi.
Configuring python3-urllib3.
Configuring python3-requests.
Configuring enigma2-plugin-extensions-bouquetmakerxtream.
Configuring uchardet.
Configuring libavresample4.
Configuring libpostproc55.
Configuring ffmpeg.
Configuring exteplayer3.
Configuring enigma2-plugin-systemplugins-serviceapp.
Configuring libssh2-1.
Configuring libcurl4.
Configuring curl.
Configuring enigma2-plugin-settings-vavoo-e2.
===== Vavoo-E2 Installation gestartet (Dauer ca. 3 Minuten) =====
--2026-02-05 08:01:33--  https://bootstrap.pypa.io/get-pip.py
Resolving bootstrap.pypa.io... 2a04:4e42:600::175, 2a04:4e42:200::175, 2a04:4e42::175, ...
Connecting to bootstrap.pypa.io|2a04:4e42:600::175|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2193376 (2.1M) [text/x-python]
Saving to: ‘/tmp/get-pip.py’

/tmp/get-pip.py                                 100%[====================================================================================================>]   2.09M  10.8MB/s    in 0.2s

2026-02-05 08:01:34 (10.8 MB/s) - ‘/tmp/get-pip.py’ saved [2193376/2193376]

Collecting pip
  Downloading pip-26.0.1-py3-none-any.whl.metadata (4.7 kB)
Collecting wheel
  Downloading wheel-0.46.3-py3-none-any.whl.metadata (2.4 kB)
Collecting packaging>=24.0 (from wheel)
  Downloading packaging-26.0-py3-none-any.whl.metadata (3.3 kB)
Downloading pip-26.0.1-py3-none-any.whl (1.8 MB)
   ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.8/1.8 MB 3.6 MB/s  0:00:00
Downloading wheel-0.46.3-py3-none-any.whl (30 kB)
Downloading packaging-26.0-py3-none-any.whl (74 kB)
Installing collected packages: pip, packaging, wheel
Successfully installed packaging-26.0 pip-26.0.1 wheel-0.46.3
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager, possibly rendering your system unusable. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv. Use the --root-user-action option if you know what you are doing and want to suppress this warning.
Installiere Python-Module
Requirement already satisfied: pip in /usr/lib/python3.9/site-packages (26.0.1)
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager, possibly rendering your system unusable. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv. Use the --root-user-action option if you know what you are doing and want to suppress this warning.
Collecting Flask==3.1.2
  Downloading flask-3.1.2-py3-none-any.whl.metadata (3.2 kB)
Collecting Requests==2.32.5
  Downloading requests-2.32.5-py3-none-any.whl.metadata (4.9 kB)
Collecting waitress==3.0.2
  Downloading waitress-3.0.2-py3-none-any.whl.metadata (5.8 kB)
Collecting Werkzeug==3.1.5
  Downloading werkzeug-3.1.5-py3-none-any.whl.metadata (4.0 kB)
Collecting blinker>=1.9.0 (from Flask==3.1.2)
  Downloading blinker-1.9.0-py3-none-any.whl.metadata (1.6 kB)
Collecting click>=8.1.3 (from Flask==3.1.2)
  Downloading click-8.1.8-py3-none-any.whl.metadata (2.3 kB)
Collecting importlib-metadata>=3.6.0 (from Flask==3.1.2)
  Downloading importlib_metadata-8.7.1-py3-none-any.whl.metadata (4.7 kB)
Collecting itsdangerous>=2.2.0 (from Flask==3.1.2)
  Downloading itsdangerous-2.2.0-py3-none-any.whl.metadata (1.9 kB)
Collecting jinja2>=3.1.2 (from Flask==3.1.2)
  Downloading jinja2-3.1.6-py3-none-any.whl.metadata (2.9 kB)
Collecting markupsafe>=2.1.1 (from Flask==3.1.2)
  Downloading markupsafe-3.0.3.tar.gz (80 kB)
  Installing build dependencies ... done
  Getting requirements to build wheel ... done
  Preparing metadata (pyproject.toml) ... done
Collecting charset_normalizer<4,>=2 (from Requests==2.32.5)
  Downloading charset_normalizer-3.4.4-cp39-cp39-manylinux2014_armv7l.manylinux_2_17_armv7l.manylinux_2_31_armv7l.whl.metadata (37 kB)
Collecting idna<4,>=2.5 (from Requests==2.32.5)
  Downloading idna-3.11-py3-none-any.whl.metadata (8.4 kB)
Collecting urllib3<3,>=1.21.1 (from Requests==2.32.5)
  Downloading urllib3-2.6.3-py3-none-any.whl.metadata (6.9 kB)
Collecting certifi>=2017.4.17 (from Requests==2.32.5)
  Downloading certifi-2026.1.4-py3-none-any.whl.metadata (2.5 kB)
Collecting zipp>=3.20 (from importlib-metadata>=3.6.0->Flask==3.1.2)
  Downloading zipp-3.23.0-py3-none-any.whl.metadata (3.6 kB)
Downloading flask-3.1.2-py3-none-any.whl (103 kB)
Downloading requests-2.32.5-py3-none-any.whl (64 kB)
Downloading waitress-3.0.2-py3-none-any.whl (56 kB)
Downloading werkzeug-3.1.5-py3-none-any.whl (225 kB)
Downloading charset_normalizer-3.4.4-cp39-cp39-manylinux2014_armv7l.manylinux_2_17_armv7l.manylinux_2_31_armv7l.whl (144 kB)
Downloading idna-3.11-py3-none-any.whl (71 kB)
Downloading urllib3-2.6.3-py3-none-any.whl (131 kB)
Downloading blinker-1.9.0-py3-none-any.whl (8.5 kB)
Downloading certifi-2026.1.4-py3-none-any.whl (152 kB)
Downloading click-8.1.8-py3-none-any.whl (98 kB)
Downloading importlib_metadata-8.7.1-py3-none-any.whl (27 kB)
Downloading itsdangerous-2.2.0-py3-none-any.whl (16 kB)
Downloading jinja2-3.1.6-py3-none-any.whl (134 kB)
Downloading zipp-3.23.0-py3-none-any.whl (10 kB)
Building wheels for collected packages: markupsafe
  Building wheel for markupsafe (pyproject.toml) ... done
  Created wheel for markupsafe: filename=markupsafe-3.0.3-py3-none-any.whl size=8819 sha256=a88f24dad0e82c9b7258951f4772b826787417eb042ef928a4ac1e49d0458a00
  Stored in directory: /home/root/.cache/pip/wheels/b3/d1/7b/ec36f9238b24f40e1fe950be7f7c74474cb36e9c8cc204e7b3
Successfully built markupsafe
Installing collected packages: zipp, waitress, urllib3, markupsafe, itsdangerous, idna, click, charset_normalizer, certifi, blinker, Werkzeug, Requests, jinja2, importlib-metadata, Flask
Successfully installed Flask-3.1.2 Requests-2.32.5 Werkzeug-3.1.5 blinker-1.9.0 certifi-2026.1.4 charset_normalizer-3.4.4 click-8.1.8 idna-3.11 importlib-metadata-8.7.1 itsdangerous-2.2.0 jinja2-3.1.6 markupsafe-3.0.3 urllib3-2.6.3 waitress-3.0.2 zipp-3.23.0
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager, possibly rendering your system unusable. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv. Use the --root-user-action option if you know what you are doing and want to suppress this warning.
Erstelle Init-Skript für automatischen Start nach Netzwerk
Starte Vavoo-E2 jetzt im Hintergrund, nur wenn Netzwerk verfügbar
===== E2 wird Neu gestartet =====
===== Vavoo-E2 Installation abgeschlossen =====

Die GUI startet neu und ihr könnt jetzt schon das Web öffnen und User und Passwort eingeben

You must be registered for see links

Erst wenn die Liste als Download erscheint - kann die auch im Bouquetmakerextreame geladen werden.

Spoiler: Vavoo IPTV Proxy

You must be registered for see images attach

 

[Badly]

funktioniert perfekt. wie sieht den der cron aus, wenn es beim start automatisch ausgeführt werden soll.

 

[Galaras7]

Hallo an allen geht es auch bei Nnenigma2 DM 920 ??? Oder nur bei Opentv

 

[Pumuckel65]

wie sieht den der cron aus, wenn es beim start automatisch ausgeführt werden soll.

@Osprey
Wird denn nach einem Neustart nicht über /etc/init.d/vavoo.sh automatisch gestartet oder mache ich da einen Denkfehler?

... Pumuckel

 

[ghost0815]

Hallo an allen geht es auch bei Nnenigma2 DM 920 ??? Oder nur bei Opentv

Geht nur mit einem Image das Python 3 hat.
NewNigma 2 gehört nicht dazu.

 

[Osprey]

Das mit dem Autostart funktioniert leider nicht zuverlässig, deshalb habe ich das Plugin mit eingebaut zum starten. Das ist der Befehl zum starten

python3 /home/vavoo_E2.py > /tmp/vavoo_E2.log 2>&1 &

 

[marzi]

läuft jetzt bei mir ,danke osprey

 

[Pumuckel65]

Das mit dem Autostart funktioniert leider nicht zuverlässig, deshalb habe ich das Plugin mit eingebaut zum starten. Das ist der Befehl zum starten

python3 /home/vavoo_E2.py > /tmp/vavoo_E2.log 2>&1 &

@Osprey

Das die /etc/init.d/vavoo.sh das Plugin nicht automatisch startet, hat mir keine Ruhe gelassen. Folgendes kann ich zumindest bei meinen Boxen und Pur-E2-7.6 berichten:

• das Script wird garnicht abgearbeitet
• Wenn man den Inhalt der vavoo.sh in eine Datei kopiert, die definitiv beim Start abgearbeitet wird, dann funktioniert der Autostart 100% einwandfrei.

Klar, der manuelle Start ist nicht schlimm, oder es per Cron zu lösen ... im Gegenteil, ich finde es sogar ganz gut, dass die Box nicht unnötig Resourcen verbraucht, da ich eh selten Vavoo nutze, aber das es nicht funktionierte ärgerte mich. Eventuell kannst Du mit dieser Analyse ja etwas anfangen. Ich starte nun wieder manuell


... Pumuckel