Reader werden nicht erkannt

[Pommfritz]

Hallo,
habe die Tage einen Raspberry mit ipc drauf zum laufen gebracht. Oscam installiert usw., leider bekomme ich die zwei Easymouse 2 nicht zum laufen. Udev Regeln habe ich erstellt und die Symlinks werden erzeugt (denke ich):

Spoiler

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A4036VXK", SYMLINK+="hdplus"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A4036VL6", SYMLINK+="sky"

Im Webif von Oscam kommt allerdings nur Error...
oscam.server:

Spoiler

[reader]
label = sky
protocol = mouse
device = /dev/sky
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 14
detect = cd
group = 1
emmcache = 1,3,12,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
cccreshare = 1
auprovid = 000001

[reader]
label = hdplus
protocol = mouse
device = /dev/hdplus
autospeed = 0
caid = 1830
boxkey = xxx
rsakey = xxx
detect = cd
mhz = 368
cardmhz = 368
ident = 1830:000000,003411,008011
group = 2
emmcache = 1,2,2,0
cccreshare = 1
auprovid = 000001

Vielleicht kann mir da jemand weiterhelfen. Ich muß aber gleich anmerken, daß ich kein Linux-Experte bin und mir das alles nach diversen Anleitungen erarbeitet habe. Habe Putty und Winscp dafür verwendet.

Danke schonmal im vorraus

 

[axel]

Hi,

hast Du Debian installiert, während die Easymouses eingesteckt waren?

Poste mal ein Log ab Neustart Oscam.

Gruß

 

[Pommfritz]

Hallo,
als ich Debian Jessie Lite installiert habe, hat noch keine Easymouse drangesteckt.

Spoiler

• 2017/04/24 12:09:05 00000000 s (main) System name = Linux
• 2017/04/24 12:09:05 00000000 s (main) Host name = raspberrypi
• 2017/04/24 12:09:05 00000000 s (main) Release = 4.4.50-v7+
• 2017/04/24 12:09:05 00000000 s (main) Version = #970 SMP Mon Feb 20 19:18:29 GMT 2017
• 2017/04/24 12:09:05 00000000 s (main) Machine = armv7l
• 2017/04/24 12:09:05 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3297
• 2017/04/24 12:09:05 00000000 s (config) userdb reloaded: 22 accounts loaded, 0 expired, 0 disabled
• 2017/04/24 12:09:05 00000000 s (main) signal handling initialized
• 2017/04/24 12:09:05 00000000 s (net) cs357x: initialized (fd=5, port=33371)
• 2017/04/24 12:09:05 00000000 s (net) cs378x: initialized (fd=6, port=33361)
• 2017/04/24 12:09:05 00000000 s (net) newcamd: initialized (fd=7, port=22000)
• 2017/04/24 12:09:05 00000000 s (net) -> CAID: 1830 PROVID: 003411
• 2017/04/24 12:09:05 00000000 s (net) cccam: initialized (fd=8, port=33360)
• 2017/04/24 12:09:05 00000000 s (reader) sky [mouse] creating thread for device /dev/sky
• 2017/04/24 12:09:05 00000000 s (reader) hdplus [mouse] creating thread for device /dev/hdplus
• 2017/04/24 12:09:05 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2017/04/24 12:09:05 00000000 s (main) waiting for local card init
• 2017/04/24 12:09:05 2E6D53EA h (webif) webif: decompressed 182761 bytes back into 433032 bytes
• 2017/04/24 12:09:05 2E6D53EA h (webif) HTTP Server running. ip=0.0.0.0 port=16002
• 2017/04/24 12:09:05 357C9891 r (reader) sky [mouse] Flush readed byte Nr 1 value 03 time_us 9379
• 2017/04/24 12:09:05 357C9891 r (reader) sky [mouse] Flush readed byte Nr 2 value 00 time_us 14946
• 2017/04/24 12:09:05 357C9891 r (reader) sky [mouse] Flush readed byte Nr 3 value 56 time_us 17974
• 2017/04/24 12:09:05 357C9891 r (reader) sky [mouse] Flush readed byte Nr 4 value ff time_us 14973
• 2017/04/24 12:09:05 357C9891 r (reader) sky [mouse] Flush readed byte Nr 5 value 00 time_us 14976
• 2017/04/24 12:09:05 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75101
• 2017/04/24 12:09:05 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 03 time_us 6700
• 2017/04/24 12:09:05 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 2 value 40 time_us 957
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 3 value 37 time_us 34983
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 4 value 5b time_us 982
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 5 value bf time_us 1981
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 6 value f5 time_us 1980
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 7 value fe time_us 988
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 8 value 0f time_us 1981
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 9 value 7d time_us 1979
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 10 value f2 time_us 970
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 11 value af time_us 1981
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 12 value 69 time_us 1992
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 13 value 00 time_us 981
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 6 value 03 time_us 63528
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 14 value ad time_us 1980
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 15 value f5 time_us 1970
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 16 value f0 time_us 975
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 17 value ff time_us 1980
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 18 value ff time_us 1987
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 19 value f5 time_us 983
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 20 value 73 time_us 1980
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 21 value 3f time_us 1976
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 7 value 00 time_us 15425
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 8 value 56 time_us 17977
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 9 value ff time_us 14967
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 10 value 00 time_us 14977
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 11 value 76 time_us 14971
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 21 bytes total time_us 147797
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Reader initialized (device=/dev/hdplus, detect=cd, mhz=368, cardmhz=368)
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 12 value 7e time_us 14992
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 13 value 71 time_us 14951
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 14 value 80 time_us 19981
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 15 value 1d time_us 18971
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 16 value ff time_us 20016
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 17 value dd time_us 21931
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 18 value 8d time_us 18964
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 19 value 7d time_us 19979
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 20 value 35 time_us 18971
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 21 value f5 time_us 19953
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 22 value 73 time_us 18986
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 23 value d3 time_us 19974
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 24 value b3 time_us 18985
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 25 value fb time_us 19975
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 26 value b5 time_us 18967
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 27 value 59 time_us 19979
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 28 value 91 time_us 18981
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 29 value 1d time_us 19978
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 30 value 3d time_us 18974
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 31 value 93 time_us 19977
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 32 value 79 time_us 18976
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Buffers readed 32 bytes total time_us 692380
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75098
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Reader initialized (device=/dev/sky, detect=cd, mhz=357, cardmhz=357)
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] card detected
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] card detected
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75104
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75101
• 2017/04/24 12:09:08 357C9891 r (reader) sky [mouse] ATR: FF 00
• 2017/04/24 12:09:08 357C9891 r (reader) sky [mouse] ERROR: Could not read reader->convention
• 2017/04/24 12:09:08 357C9891 r (reader) sky [mouse] Error activating card.
• 2017/04/24 12:09:08 7B4F4DF6 r (reader) hdplus [mouse] ATR:
• 2017/04/24 12:09:08 7B4F4DF6 r (reader) hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2017/04/24 12:09:08 7B4F4DF6 r (reader) hdplus [mouse] Setting baudrate to 39638 bps
• 2017/04/24 12:09:08 7B4F4DF6 r (reader) hdplus [mouse] Calculated work ETU is 25.27 us reader mhz = 368
• 2017/04/24 12:09:08 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75126
• 2017/04/24 12:09:08 7B4F4DF6 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2017/04/24 12:09:08 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75125
• 2017/04/24 12:09:10 357C9891 r (reader) sky [mouse] Flush readed byte Nr 1 value 93 time_us 58983
• 2017/04/24 12:09:10 357C9891 r (reader) sky [mouse] Buffers readed 1 bytes total time_us 134212
• 2017/04/24 12:09:11 7B4F4DF6 r (reader) hdplus [mouse] card system not supported
• 2017/04/24 12:09:11 7B4F4DF6 r (reader) hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
• 2017/04/24 12:09:11 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75125
• 2017/04/24 12:09:11 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75127
• 2017/04/24 12:09:12 7B4F4DF6 r (reader) hdplus [mouse] ATR: FE 0F 7D F2 AF 69 00 AD F5 F0 FF FF F5 73
• 2017/04/24 12:09:12 7B4F4DF6 r (reader) hdplus [mouse] ERROR: Could not read reader->convention
• 2017/04/24 12:09:12 7B4F4DF6 r (reader) hdplus [mouse] Error activating card.
• 2017/04/24 12:09:12 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75123
• 2017/04/24 12:09:13 357C9891 r (reader) sky [mouse] ATR:
• 2017/04/24 12:09:13 357C9891 r (reader) sky [mouse] Init card protocol T0, FI=9, F=512, D=16, N=255
• 2017/04/24 12:09:13 357C9891 r (reader) sky [mouse] Setting baudrate to 111600 bps
• 2017/04/24 12:09:13 357C9891 r (reader) sky [mouse] Calculated work ETU is 8.96 us reader mhz = 357
• 2017/04/24 12:09:13 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75124
• 2017/04/24 12:09:13 357C9891 r (reader) sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2017/04/24 12:09:13 7B4F4DF6 r (reader) hdplus [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2017/04/24 12:09:13 7B4F4DF6 r (reader) hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2017/04/24 12:09:13 7B4F4DF6 r (reader) hdplus [mouse] Calculated work ETU is 101.09 us reader mhz = 368
• 2017/04/24 12:09:14 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75125
• 2017/04/24 12:09:14 7B4F4DF6 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
• 2017/04/24 12:09:14 357C9891 r (reader) sky [mouse] card system not supported
• 2017/04/24 12:09:14 357C9891 r (reader) sky [mouse] Normal mode failed, reverting to Deprecated Mode
• 2017/04/24 12:09:14 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75237
• 2017/04/24 12:09:16 357C9891 r (reader) sky [mouse] ATR:
• 2017/04/24 12:09:16 357C9891 r (reader) sky [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2017/04/24 12:09:16 357C9891 r (reader) sky [mouse] Calculated work ETU is 104.20 us reader mhz = 357
• 2017/04/24 12:09:16 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75099
• 2017/04/24 12:09:16 357C9891 r (reader) sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2017/04/24 12:09:17 7B4F4DF6 r (reader) hdplus [mouse] card system not supported
• 2017/04/24 12:09:17 7B4F4DF6 r (reader) hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2017/04/24 12:09:17 7B4F4DF6 r (reader) hdplus [mouse] card initializing error
• 2017/04/24 12:09:18 357C9891 r (reader) sky [mouse] Warning: Card returned error on setting ifsd value to 251
• 2017/04/24 12:09:19 357C9891 r (reader) sky [mouse] detect native nagra card
• 2017/04/24 12:09:20 357C9891 r (reader) sky [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2017/04/24 12:09:22 357C9891 r (reader) sky [mouse] T1 Resync command error, trying to reactivate!
• 2017/04/24 12:09:22 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75122
• 2017/04/24 12:09:23 357C9891 r (reader) sky [mouse] ATR:
• 2017/04/24 12:09:23 357C9891 r (reader) sky [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2017/04/24 12:09:23 357C9891 r (reader) sky [mouse] Setting baudrate to 111600 bps
• 2017/04/24 12:09:23 357C9891 r (reader) sky [mouse] Calculated work ETU is 8.96 us reader mhz = 357
• 2017/04/24 12:09:23 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75124
• 2017/04/24 12:09:23 357C9891 r (reader) sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
• 2017/04/24 12:09:23 357C9891 r (reader) sky [mouse] Card responded ok for ifsd request of 251
• 2017/04/24 12:09:24 357C9891 r (reader) sky [mouse] Negotiate sessionkey was not successful! Please check rsa key and boxkey
• 2017/04/24 12:09:24 357C9891 r (reader) sky [mouse] card system not supported
• 2017/04/24 12:09:24 357C9891 r (reader) sky [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2017/04/24 12:09:24 357C9891 r (reader) sky [mouse] card initializing error
• 2017/04/24 12:09:25 00000000 s (main) init for all local cards done
• 2017/04/24 12:09:25 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
• 2017/04/24 12:09:25 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
• 2017/04/24 12:09:25 00000000 s (anticasc) anti cascading disabled

 

[axel]

Hi,

die Easymouses werden erkannt, Du hast ein Problem mit den Karten...

• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] card detected
• 2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75104
• 2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75101
• 2017/04/24 12:09:08 357C9891 r (reader) sky [mouse] ATR: FF 00
• 2017/04/24 12:09:08 357C9891 r (reader) sky [mouse] ERROR: Could not read reader->convention
• 2017/04/24 12:09:08 357C9891 r (reader) sky [mouse] Error activating card.

Gruß

 

[Pommfritz]

Wenn ich die in meine Fritzbox mit freetz einstecke, laufen die astrein...
Komischerweise wurde die HD01 schon erkannt, die Sky-Karte noch gar nicht...

Kann das auch irgendwie an der Stromversorgung des Raspi liegen?
Habe dieses Netzteil:

Sie müssen registriert sein, um Links zu sehen.

 

[axel]

Hi,

ok poste mal bitte die kompletten Konfigs. Vielleicht hat dann jemand eine Idee, ich gerade leider nicht.

Gruß

 

[Pommfritz]

oscam.config

Spoiler

[global]
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480

[cache]

[cs357x]
port = 33371
suppresscmd08 = 1

[cs378x]
port = 33361
suppresscmd08 = 1

[newcamd]
port = 22000@1830:003411
key = 0102030405060708091011121314

[cccam]
port = 33360
nodeid = A82EFC3910F91548
version = 2.3.0
reshare_mode = 1

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255

oscam.server

Spoiler

[reader]
label = sky
protocol = mouse
device = /dev/sky
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 14
detect = cd
group = 1
emmcache = 1,3,12,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
cccreshare = 1
auprovid = 000001

[reader]
label = hdplus
protocol = mouse
device = /dev/hdplus
autospeed = 0
caid = 1830
boxkey = xxx
rsakey = xxx
detect = cd
mhz = 368
cardmhz = 368
ident = 1830:000000,003411,008011
group = 2
emmcache = 1,2,2,0
cccreshare = 1
auprovid = 000001

[reader]
label = OSEmu
enable = 0
protocol = cs357x
device = 127.0.0.1,33371
user = emu
password = emu
caid = 0D00,0D02,0D03,0D05,090F
ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D05:9C;090F:62,73,84,94,95,96,99,A6,B7
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:00008C,0000A0,0000A4,0000A8;0D03:000004,000008,000024,000028;0D05:000004,000010;090F:000000
group = 3

Reicht das?

 

[czutok]

bei dem sky reader fehlen dir die freqenzen

mhz =
cardmhz =

 

[Derek Buegel]

... oder autospeed = 1, sollte es auch tun - fürs Erste.

MfG

 

[dodo83]

Autospeed geht nich bei den Mäusen da diese ha fest per Dip Schalter getaktet werden.
Wie stehen diese?

Gesendet von meinem LG-D855 mit Tapatalk

 

[janni1]

Hi,
ich würde evtl. mal ein anderes Netzteil oder einen aktiven USB-Hub versuchen.
Dein Netzteil hat wohl laut Amazon-Bewertungen immer mal wieder "Unterspannungsprobleme".

Achso und
Autospeed funktioniert nur mit internen Readern und mit Smargos.

Autospeed: Sets mhz according to atr for smargo readers and dreambox internal readers. Default is checked

 

[Pommfritz]

Hi,
also die Easymäuse sind richtig eingestellt, da ja an der Fritzbox mit freetz alles funktioniert! Am Reader selbst (beim Raspi) sind die mhz und card mhz bei der Skykarte mit jeweils 357 mhz alles i.o. Die HD01 ist ja schon mal erkannt worden, die Skykarte noch nie. Beide Karten zusammen ergeben immer Error...

 

[Bodo-1]

ich würde evtl. mal ein anderes Netzteil oder einen aktiven USB-Hub versuchen.

gelesen ?

 

[Pommfritz]

Die Lösung war der Hub! Jetzt werden beide Karten erkannt! Jetzt stimmt nur was mit der Config nicht von oscam...

 

[Bodo-1]

Mehr Infos wären hilfreich .

Was steht denn im Log dazu ?

Gesendet von meinem ONE A2003 mit Tapatalk