Raspberry Pi 3 und Oscam

[firefighter166]

Wie gewünscht

Spoiler: oscam.conf

# OSCam Konfiguration IPC - oscam.conf

[global]
serverip = 0.0.0.0
disablelog = 0
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
cachedelay = 0
saveinithistory = 1
loghistorysize = 4096

[newcamd]
key = 0102030405060708091011121314
port = 22000@1830:003411

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
httpreadonly = 0
httpsavefullcfg = 0

Spoiler: oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11378
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = skyv13
protocol = mouse
device = /dev/ttyUSB0
caid = 09C4
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ins7e11 = 15
ndsversion = 2

[reader]
label = camd3emu
enable = 0
protocol = cs357x
device = 127.0.0.1,20248
user = meinserver
password = meinserverpass
group = 1

[reader]
label = osemu
enable = 0
protocol = cs357x
device = 127.0.0.1,54321
user = emu
password = emu
caid = 0D00,0D02,0D03,0D05,090F
ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D05:9C;090F:62,73,84,94,95,96,99,A6,B7
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:00008C,0000A0,0000A4,0000A8;0D03:000004,000008,000024,000028;0D05:000004,000010;090F:000000
group = 1

Spoiler: oscam.user

# OSCam Konfiguration IPC - oscam.user

[account]
user = cccam
pwd = cccam
caid = 1830
hostname = localhost
uniq = 1
group = 1
au = HD+

Spoiler: logfile

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Wed Mar 15 13:01:14 2017
-------------------------------------------------------------------------------
2017/03/15 13:01:14 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11378 (arm-linux-gnueabihf)
2017/03/15 13:01:14 00000000 s (main) System name = Linux
2017/03/15 13:01:14 00000000 s (main) Host name = raspberrypi
2017/03/15 13:01:14 00000000 s (main) Release = 4.4.50-v7+
2017/03/15 13:01:14 00000000 s (main) Version = #970 SMP Mon Feb 20 19:18:29 GMT 2017
2017/03/15 13:01:14 00000000 s (main) Machine = armv7l
2017/03/15 13:01:14 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2529
2017/03/15 13:01:14 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2017/03/15 13:01:14 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2017/03/15 13:01:14 00000000 s (main) signal handling initialized
2017/03/15 13:01:14 00000000 s (net) newcamd: initialized (fd=5, port=22000)
2017/03/15 13:01:14 00000000 s (net) -> CAID: 1830 PROVID: 003411
2017/03/15 13:01:14 00000000 s (reader) skyv13 [mouse] creating thread for device /dev/ttyUSB0
2017/03/15 13:01:14 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/03/15 13:01:14 00000000 s (main) waiting for local card init
2017/03/15 13:01:14 77BB5897 h (webif) webif: decompressed 177577 bytes back into 435684 bytes
2017/03/15 13:01:14 77BB5897 h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2017/03/15 13:01:14 2A4308FA r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75139
2017/03/15 13:01:14 2A4308FA r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75124
2017/03/15 13:01:14 2A4308FA r (reader) skyv13 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2017/03/15 13:01:15 2A4308FA r (reader) skyv13 [mouse] card detected
2017/03/15 13:01:15 2A4308FA r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75136
2017/03/15 13:01:16 2A4308FA r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75116
2017/03/15 13:01:17 2A4308FA r (reader) skyv13 [mouse] ATR: 3F FF 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00
2017/03/15 13:01:17 2A4308FA r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75115
2017/03/15 13:01:18 2A4308FA r (reader) skyv13 [mouse] Warning: D=0 is invalid, forcing D=1
2017/03/15 13:01:18 2A4308FA r (reader) skyv13 [mouse] Init card protocol T5, FI=3, F=744, D=1, N=17
2017/03/15 13:01:18 2A4308FA r (reader) skyv13 [mouse] Setting baudrate to 4800 bps
2017/03/15 13:01:18 2A4308FA r (reader) skyv13 [mouse] Calculated work ETU is 208.40 us reader mhz = 357
2017/03/15 13:01:18 2A4308FA r (reader) skyv13 [mouse] ERROR: Parse_ATR returned error
2017/03/15 13:01:18 2A4308FA r (reader) skyv13 [mouse] Error activating card.
2017/03/15 13:01:19 2A4308FA r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75131
2017/03/15 13:01:20 2A4308FA r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75115
2017/03/15 13:01:21 2A4308FA r (reader) skyv13 [mouse] ATR: 3F 00
2017/03/15 13:01:21 2A4308FA r (reader) skyv13 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
2017/03/15 13:01:21 2A4308FA r (reader) skyv13 [mouse] Setting baudrate to 9600 bps
2017/03/15 13:01:21 2A4308FA r (reader) skyv13 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2017/03/15 13:01:21 2A4308FA r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75116
2017/03/15 13:01:21 2A4308FA r (reader) skyv13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2017/03/15 13:01:22 2A4308FA r (reader) skyv13 [mouse] card system not supported
2017/03/15 13:01:22 2A4308FA r (reader) skyv13 [mouse] Normal mode failed, reverting to Deprecated Mode
2017/03/15 13:01:22 2A4308FA r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75118
2017/03/15 13:01:23 2A4308FA r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75115
2017/03/15 13:01:24 2A4308FA r (reader) skyv13 [mouse] ATR: 3F FF 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00
2017/03/15 13:01:24 2A4308FA r (reader) skyv13 [mouse] Warning: D=0 is invalid, forcing D=1
2017/03/15 13:01:24 2A4308FA r (reader) skyv13 [mouse] Init card protocol T5, FI=3, F=744, D=1, N=17
2017/03/15 13:01:24 2A4308FA r (reader) skyv13 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2017/03/15 13:01:24 2A4308FA r (reader) skyv13 [mouse] ERROR: Parse_ATR returned error
2017/03/15 13:01:24 2A4308FA r (reader) skyv13 [mouse] Error activating card.
2017/03/15 13:01:25 2A4308FA r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75123
2017/03/15 13:01:26 2A4308FA r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75115
2017/03/15 13:01:27 2A4308FA r (reader) skyv13 [mouse] ATR: 3F FF 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00
2017/03/15 13:01:27 2A4308FA r (reader) skyv13 [mouse] Warning: D=0 is invalid, forcing D=1
2017/03/15 13:01:27 2A4308FA r (reader) skyv13 [mouse] Init card protocol T5, FI=3, F=744, D=1, N=17
2017/03/15 13:01:27 2A4308FA r (reader) skyv13 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2017/03/15 13:01:27 2A4308FA r (reader) skyv13 [mouse] ERROR: Parse_ATR returned error
2017/03/15 13:01:27 2A4308FA r (reader) skyv13 [mouse] Error activating card.
2017/03/15 13:01:28 2A4308FA r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75122
2017/03/15 13:01:29 2A4308FA r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75116
2017/03/15 13:01:30 2A4308FA r (reader) skyv13 [mouse] ATR: 3F FF 00 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01
2017/03/15 13:01:30 2A4308FA r (reader) skyv13 [mouse] Warning: D=0 is invalid, forcing D=1
2017/03/15 13:01:30 2A4308FA r (reader) skyv13 [mouse] Init card protocol T5, FI=0, F=372, D=1, N=255
2017/03/15 13:01:30 2A4308FA r (reader) skyv13 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2017/03/15 13:01:30 2A4308FA r (reader) skyv13 [mouse] ERROR: Parse_ATR returned error
2017/03/15 13:01:30 2A4308FA r (reader) skyv13 [mouse] Error activating card.
2017/03/15 13:01:31 2A4308FA r (reader) skyv13 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2017/03/15 13:01:31 2A4308FA r (reader) skyv13 [mouse] card initializing error
2017/03/15 13:01:31 00000000 s (main) init for all local cards done
2017/03/15 13:01:31 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2017/03/15 13:01:31 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms
2017/03/15 13:01:31 00000000 s (anticasc) anti cascading disabled

 

[Balu-700]

Alle Reader Group 1??
GGeht nicht

 

[Alex]

Das geht sehr wohl mit allen Readern in einer Gruppe.
Was den Smarog betrifft: Ich würde ihn im Protokoll Smartreader ansprechen.
Am Besten mit Software 1.07 eine Namen geben und dann so ansprechen:

Spoiler

protocol                      = smartreader
device                        = Serial:Smargo2

 

[axel]

Hi,

mach das mal so:

Spoiler

[reader]
label = osemu
protocol = cs357x
device = 127.0.0.1,54321
user = emu
password = emu
caid = 0D00,0D02,0D03,0D05,090F
ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D05:9C;090F:62,73,84,94,95,96,99,A6,B7
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:00008C,0000A0,0000A4,0000A8;0D03:000004,000008,000024,000028;0D05:000004,000010;090F:000000
group = 1

[reader]
label = skyv13
protocol = smartreader
device = Serial:Smargo2
caid = 09C4
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ins7e11 = 15
ndsversion = 2

(Ergänzung von @al-x83 eingebaut)

Spoiler

[account]
user = cccam
pwd = cccam
hostname = localhost
uniq = 1
group = 1,2
au = skyv13

Gruß

 

[firefighter166]

Habe jetzt alles so umgestellt wie beschrieben nur kommt jetzt folgendes bei raus:

Spoiler: Logfile

• 2017/03/15 13:58:04 00000000 s (main) System name = Linux
• 2017/03/15 13:58:04 00000000 s (main) Host name = raspberrypi
• 2017/03/15 13:58:04 00000000 s (main) Release = 4.4.50-v7+
• 2017/03/15 13:58:04 00000000 s (main) Version = #970 SMP Mon Feb 20 19:18:29 GMT 2017
• 2017/03/15 13:58:04 00000000 s (main) Machine = armv7l
• 2017/03/15 13:58:04 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 9846
• 2017/03/15 13:58:04 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2017/03/15 13:58:04 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2017/03/15 13:58:04 00000000 s (main) signal handling initialized
• 2017/03/15 13:58:04 00000000 s (net) newcamd: initialized (fd=5, port=22000)
• 2017/03/15 13:58:04 00000000 s (net) -> CAID: 1830 PROVID: 003411
• 2017/03/15 13:58:04 00000000 s (reader) osemu [cs357x] creating thread for device 127.0.0.1
• 2017/03/15 13:58:04 2A4308FA p (reader) osemu [cs357x] proxy 127.0.0.1:54321
• 2017/03/15 13:58:04 2A4308FA p (reader) osemu [cs357x] proxy initialized, server 127.0.0.1:54321
• 2017/03/15 13:58:04 00000000 s (reader) skyv13 [smartreader] creating thread for device Serial:Smargo2
• 2017/03/15 13:58:04 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2017/03/15 13:58:04 00000000 s (main) waiting for local card init
• 2017/03/15 13:58:04 77BB5897 h (webif) webif: decompressed 177577 bytes back into 435684 bytes
• 2017/03/15 13:58:04 3C62160C r (reader) skyv13 [smartreader] Smartreader device Serial:Smargo2 not found
• 2017/03/15 13:58:04 77BB5897 h (webif) HTTP Server running. ip=0.0.0.0 port=16002
• 2017/03/15 13:58:04 3C62160C r (reader) skyv13 [smartreader] Cannot open device: Serial:Smargo2
• 2017/03/15 13:58:06 3C62160C r (reader) skyv13 [smartreader] Smartreader device Serial:Smargo2 not found
• 2017/03/15 13:58:06 3C62160C r (reader) skyv13 [smartreader] Cannot open device: Serial:Smargo2
• 2017/03/15 13:58:08 3C62160C r (reader) skyv13 [smartreader] Smartreader device Serial:Smargo2 not found
• 2017/03/15 13:58:08 3C62160C r (reader) skyv13 [smartreader] Cannot open device: Serial:Smargo2
• 2017/03/15 13:58:10 3C62160C r (reader) skyv13 [smartreader] Smartreader device Serial:Smargo2 not found
• 2017/03/15 13:58:10 3C62160C r (reader) skyv13 [smartreader] Cannot open device: Serial:Smargo2
• 2017/03/15 13:58:12 3C62160C r (reader) skyv13 [smartreader] Smartreader device Serial:Smargo2 not found
• 2017/03/15 13:58:12 3C62160C r (reader) skyv13 [smartreader] Cannot open device: Serial:Smargo2
• 2017/03/15 13:58:14 3C62160C r (reader) skyv13 [smartreader] Smartreader device Serial:Smargo2 not found
• 2017/03/15 13:58:14 3C62160C r (reader) skyv13 [smartreader] Cannot open device: Serial:Smargo2
• 2017/03/15 13:58:16 3C62160C r (reader) skyv13 [smartreader] Smartreader device Serial:Smargo2 not found
• 2017/03/15 13:58:16 3C62160C r (reader) skyv13 [smartreader] Cannot open device: Serial:Smargo2
• 2017/03/15 13:58:18 3C62160C r (reader) skyv13 [smartreader] Smartreader device Serial:Smargo2 not found
• 2017/03/15 13:58:18 3C62160C r (reader) skyv13 [smartreader] Cannot open device: Serial:Smargo2
• 2017/03/15 13:58:20 3C62160C r (reader) skyv13 [smartreader] Smartreader device Serial:Smargo2 not found
• 2017/03/15 13:58:20 3C62160C r (reader) skyv13 [smartreader] Cannot open device: Serial:Smargo2
• 2017/03/15 13:58:22 3C62160C r (reader) skyv13 [smartreader] Smartreader device Serial:Smargo2 not found
• 2017/03/15 13:58:22 3C62160C r (reader) skyv13 [smartreader] Cannot open device: Serial:Smargo2
• 2017/03/15 13:58:24 3C62160C r (reader) skyv13 [smartreader] Smartreader device Serial:Smargo2 not found
• 2017/03/15 13:58:24 3C62160C r (reader) skyv13 [smartreader] Cannot open device: Serial:Smargo2
• 2017/03/15 13:58:25 00000000 s (main) init for all local cards done
• 2017/03/15 13:58:25 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
• 2017/03/15 13:58:25 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms

 

[Alex]

Hast du auf dem Smargo die FW 1.07 drauf?
Hast du dem Smargo den Namen Smargo2 gegeben?

Das war ein konkretes Beispiel wie ich es bei mir habe und ist nicht allgemeingültig

 

[Smiley007]

gehe mal über das WebIF der Oscam auf die Reader Übersicht

Spoiler

Du musst angemeldet sein, um Bilder zu sehen.

dort auf USB scan

Spoiler

Du musst angemeldet sein, um Bilder zu sehen.

der Reader wird dann so angesprochen:

protocol                      = smartreader
device                        = Serial:Reader 54C4E62

 

[firefighter166]

Ich bin mir nicht sicher ob es geklappt hat mit dem FW Update. Wenn ich die Einstellungen auslesen möchte dann kommt die tolle Fehlermeldung : ERROR version 0.0 is to old

 

[Smiley007]

Poste mal bitte die oscam.version

Spoiler: oscam.version

Unix starttime: 1489340593
Starttime:      12.03.2017 18:43:13
Version:        oscam-1.20-unstable_svn-r11377
Compiler:       arm-bcm2708hardfp-linux-gnueabi-libusb
Box type:       generic (generic)
PID:            2487
TempDir:        /tmp/.oscam
ConfigDir:      /usr/local/etc/
WebifPort:      83

GBox tmp_dir:   not defined using: /tmp/.oscam
                value read during start up, not refreshed if changed later in webif!

Web interface support:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
Touch interface support:                 yes
SSL support:                             no
DVB API support:                         yes
DVB API with AZBOX support:              no
DVB API with MCA support:                no
DVB API with COOLAPI support:            no
DVB API with COOLAPI2 support:           no
DVB API with STAPI support:              no
DVB API with STAPI5 support:             no
DVB API read-sdt charsets:               yes
Irdeto guessing:                         yes
Anti-cascading support:                  no
Debug mode:                              yes
Monitor:                                 yes
Loadbalancing support:                   yes
Cache exchange support:                  yes
CW Cycle Check support:                  yes
LCD support:                             no
LED support:                             no
Emulator support:                        yes
Clockfix with realtime clock:            yes
IPv6 support:                            no

camd 3.3x:                               no
camd 3.5 UDP:                            yes
camd 3.5 TCP:                            yes
newcamd:                                 yes
CCcam:                                   yes
CCcam share:                             yes
gbox:                                    yes
radegast:                                no
scam:                                    no
serial:                                  yes
constant CW:                             yes
Pandora:                                 no
ghttp:                                   no

Reader support:                          yes

Nagra:                                   yes
Irdeto:                                  yes
Conax:                                   yes
Cryptoworks:                             yes
Seca:                                    yes
Viaccess:                                yes
NDS Videoguard:                          yes
DRE Crypt:                               yes
TONGFANG:                                yes
Bulcrypt:                                yes
Griffin:                                 yes
DGCrypt:                                 yes

cardreader_phoenix:                      yes
cardreader_drecas:                       yes
cardreader_internal_azbox:               no
cardreader_internal_coolapi:             no
cardreader_internal_coolapi2:            no
cardreader_internal_sci:                 no
cardreader_sc8in1:                       yes
cardreader_mp35:                         yes
cardreader_smargo:                       yes
cardreader_pcsc:                         no
cardreader_smartreader:                  yes
cardreader_db2com:                       no
cardreader_stapi:                        no
cardreader_stapi5:                       no
cardreader_stinger:                      yes

 

[firefighter166]

Spoiler: oscam.version

Unix starttime: 1489589100
Starttime: 15.03.2017 14:45:00
Version: oscam-1.20-unstable_svn-r11378
Compiler: arm-linux-gnueabihf
Box type: generic (generic)
PID: 819
TempDir: /tmp/.oscam
ConfigDir: /var/etc/
WebifPort: 16002

GBox tmp_dir: not defined using: /tmp/.oscam
value read during start up, not refreshed if changed later in webif!

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_drecas: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: yes
cardreader_smartreader: yes
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes

 

[Smiley007]

dir fehlt sicher der Smartreader Treiber libusb

tausche mal die Binary mit dieser und starte den Pi dann komplett neu uns schaue ob der USB Scan dann geht

 

[Alex]

dir fehlt sicher der Smartreader Treiber libusb

Libusb wir bei IPC mitinstalliert und bei o compile auch immer der Smargo-Support miteinkompiliert

 

[firefighter166]

Mich würde jetzt mal lieber wissen was der Kartenleser macht habe den verdacht dass ich ihn abgeschossen habe.

 

[Smiley007]

OK, IPC nutze ich schon lange nicht mehr.

libusb habe ich halt immer in meiner Binary drin, da ich auch Smartreader und EasyMouse nutze.

Der Scan USB sollte doch aber bei IPC auch den Smartreader erkennen?

 

[firefighter166]

Sieht bei mir so aus:

Spoiler

Du musst Regestriert sein, um das angehängte Bild zusehen.