Support Progrogrammierung an einem flash / recovery programm

 * MAPSTART=0x40000000
 * FULLSIZE=0x40000000     (1024 MB)
 * MAPLIMIT=0x80000000
 * FILESIZE=0x036839a5     (~54 MB)
 * ALIBYTES=0x0000c65b     (~49 kB)
 * FREESIZE=0x3c970000     (~969 MB)
 * MTDSTART=0x7c970000

./push_firmware 7490_07.57.all-rev113062_inhaus_freetz-ng-23762M-3e82f089e_ssl_1_1_x_with_readerdriver_masterbox.image -cmd ftp

 * Analyzing '7490_07.57.all-rev113062_inhaus_freetz-ng-23762M-3e82f089e_ssl_1_1_x_with_readerdriver_masterbox.image' ...
 * Product: Fritz_Box_HW185 (FRITZ!Box 7490)
 * Using command: ftp
 * Target host: 192.168.178.1
 * Outgoing IP: 192.168.178.13
 * Flash mode: ram-boot
 * Allowed memory size: 128 MB
 * Designated linux_fs_start: <other>

 !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!!
 !!!  THERE IS NO WARRANTY AT ALL !!! USE AT YOUR OWN RISK   !!!

 * Are you sure, that you want to flash this file to the device?
   7490_07.57.all-rev113062_inhaus_freetz-ng-23762M-3e82f089e_ssl_1_1_x_with_readerdriver_masterbox.image
   Proceed? (y/[n]) y

 * You should now reboot your box (192.168.178.1). Waiting for shut down.
   Switch off, if reboot is not detected because it happens too quickly.
   Some newer bootloader versions allow to flash on power-cycle only.
   ...................
 * MAPSTART=0x80000000
 * FULLSIZE=0x08000000     (128 MB)
 * MAPLIMIT=0x88000000
 * FILESIZE=0x028ded00     (~40 MB)
 * ALIBYTES=0x00000000     (~0 kB)
 * FREESIZE=0x05721300     (~87 MB)
 * MTDSTART=0x85721300

./push_firmware 6591_07.90.ger-rev113453_inhaus_freetz-ng-23762M-3e82f089e_ssl_3_0_x_with_readerdriver_masterbox.image -cmd ftp

 * Analyzing '6591_07.90.ger-rev113453_inhaus_freetz-ng-23762M-3e82f089e_ssl_3_0_x_with_readerdriver_masterbox.image' ...
 * Product: Fritz_Box_HW233a (FRITZ!Box 6591 Cable)
 * Using command: ftp
 * Target host: 192.168.178.1
 * Outgoing IP: 192.168.178.13
 * Flash mode: uimg-boot
 * Designated linux_fs_start: 1

 !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!!
 !!!  THERE IS NO WARRANTY AT ALL !!! USE AT YOUR OWN RISK   !!!

 * Are you sure, that you want to flash this file to the device?
   6591_07.90.ger-rev113453_inhaus_freetz-ng-23762M-3e82f089e_ssl_3_0_x_with_readerdriver_masterbox.image
   Proceed? (y/[n]) y

 * You should now reboot your box (192.168.178.1). Waiting for shut down.
   Switch off, if reboot is not detected because it happens too quickly.
   Some newer bootloader versions allow to flash on power-cycle only.
   ..................
 * Arm-System mtd: =
 * Arm-Kernel mtd: >
 * x86-System mtd: ;
 * x86-Kernel mtd: <

 * Analyzing 'images/7530AX_07.31.all_freetz-ng-21397-eae5d2245-ng23030_20230320-162204.image' ...                                            de -Idrivers/char/avm_net_trace/include   -I
 * Product: Fritz_Box_HW256 (FRITZ!Box 7530 AX)
 * Using command: ftp
 * Target host: 192.168.178.1
 * Outgoing IP: 192.168.178.22
 * Flash mode: fit-boot
 * Allowed memory size: 512 MB
 * Designated linux_fs_start: <other>
 * File: images/7530AX_07.31.all_freetz-ng-21397-eae5d2245-ng23030_20230320-162204.image

 * MAPSTART=0x00000000
 * FULLSIZE=0x20000000    (512 MB)
 * MAPLIMIT=0x20000000
 * FILESIZE=0x024fd61b    (~36 MB)
 * ALIBYTES=0x000029e5    (~10 kB)
 * FREESIZE=0x1db00000    (~475 MB)
 * MTDSTART=0x1db00000

 * No reply from box, assuming switch-off or restart. Trying to re-detect box.
   Waiting ................ping: connect: Das Netzwerk ist nicht erreichbar
.ping: connect: Das Netzwerk ist nicht erreichbar
.ping: connect: Das Netzwerk ist nicht erreichbar
.. found!

 * Box is back up again, initiating transfer.

Debugging on (debug=1).
---> TYPE I
---> MEDIA SDRAM
---> SETENV memsize 0x1db00000
---> SETENV kernel_args_tmp "avm_fwupdate mtdram1=0x1db00000,0x20000000 mtdparts_ext=update-image.0:0x24fd61b@0x0(fit-image)"
---> PASV
---> STOR 0x1db00000 0x20000000
---> QUIT

done