Probleme UFS 912 und Futro-Server

[smeerlap]

Hallo,

ich habe einen Osram-Server (fertig konfiguriert) mit einer Easymouse 2 (3,3V,phoenix,3,578MHz) und einer V14.
Meine Kathrein mit Original Software soll darauf "zugreifen".

Nach der Anleitung im Forum habe ich die Osram Dateien per FTP kopiert und die Dateien angepasst.
Leider klappt es nicht. Kann mir jemand weiterhelfen?

osram.server

Spoiler

label = cccam-reader
protocol = cccam
device = 192.168.1.113,12000
account = abc,abc (wie in osram.users)
emmcache = 1,1,2
cccversion = 2.2.1
detect = CD
Group = 1
caid = 098C

osram.users

Spoiler

[account]
user = abc (user ist auch über Webinterface eingerichtet
pwd = abc
group = 1
au = 1
uniq = 0
betatunnel = 1833.006A:1702,1833.006B:1702,1833.006F:1702,1833.0070:1702,1833.0071:1702,1833.0072:1702,1833.0075:1702,1833.0077:1702,1833.0078:1702,1833.0079:1702,1833.007A:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084:1702,1833.0069:1702,1833.0076:1702,1833.007C:1702
caid = 098C

Die Log sieht wie folgt aus:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Apr 5 15:43:46 2014
-------------------------------------------------------------------------------
2014/04/05 15:43:46 29728000 s >> OSCam << cardserver started, version 1.10rc-svn, build #5983 (sh4-amino-linux)
2014/04/05 15:43:46 29728000 s version=1.10rc-svn, build #5983, system=sh4-amino-linux, nice=0
2014/04/05 15:43:46 29728000 s client max. idle=120 sec, debug level=0
2014/04/05 15:43:46 29728000 s max. logsize=500 Kb, loghistorysize=4096 bytes
2014/04/05 15:43:46 29728000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2014/04/05 15:43:46 29728000 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/04/05 15:43:46 29728000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/04/05 15:43:46 29728000 s signal handling initialized (type=sysv)
2014/04/05 15:43:46 29728000 s 146 service-id's loaded in 6ms
2014/04/05 15:43:46 29728000 s can't open file "/data/oscam/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2014/04/05 15:43:46 29728000 s 3 provid's loaded
2014/04/05 15:43:46 29728000 s can't open file "/data/oscam/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2014/04/05 15:43:46 29728000 s monitor: disabled
2014/04/05 15:43:46 29728000 s camd33: disabled
2014/04/05 15:43:46 29728000 s camd35: disabled
2014/04/05 15:43:46 29728000 s cs378x: disabled
2014/04/05 15:43:46 29728000 s newcamd: disabled
2014/04/05 15:43:46 29728000 s radegast: disabled
2014/04/05 15:43:46 2A7284E8 h HTTP Server listening on port 12345
2014/04/05 15:43:46 29728000 s http thread started
2014/04/05 15:43:46 29728000 s creating thread for device 192.168.1.113
2014/04/05 15:43:46 2AF284E8 p proxy thread started (thread=2AF284E8, label=cccam-reader, server=192.168.1.113)
2014/04/05 15:43:46 2AF284E8 p connecting to 192.168.1.113
2014/04/05 15:43:46 2AF284E8 p 192.168.1.113: resolved ip=192.168.1.113
2014/04/05 15:43:46 29728000 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/04/05 15:43:46 29728000 s anti cascading disabled
2014/04/05 15:43:46 2B7284E8 c plain dvbapi-client granted (anonymous, au=off)
2014/04/05 15:43:46 2B7284E8 c stapi: 11 entries read from oscam.dvbapi
2014/04/05 15:43:46 2B7284E8 c stapi: use alternative ioctls
2014/04/05 15:43:46 2B7284E8 c stapi: PTI: PTI2 open 0
2014/04/05 15:43:46 2B7284E8 c stapi: PTI: PTI1 open 1
2014/04/05 15:43:46 2B7284E8 c stapi: PTI: PTI0 open 2
2014/04/05 15:43:46 2B7284E8 c stapi: liboscam_stapi v.0.08a initialized
2014/04/05 15:43:46 2B7284E8 c stapi: found pmt file /tmp/pmt_PTI0.tmp
2014/04/05 15:43:46 2AF284E8 p connect(fd=22) failed: (errno=110 Connection timed out)
2014/04/05 15:43:46 2AF284E8 p cccam-reader network connect error!
2014/04/05 15:43:46 2B7284E8 c stapi: [ADD PID 0] CAID: 1833 ECM_PID: 1801 PROVID: 000000
2014/04/05 15:43:46 2B7284E8 c stapi: [ADD PID 1] CAID: 09C4 ECM_PID: 1B01 PROVID: 000000
2014/04/05 15:43:46 2B7284E8 c stapi: [ADD PID 2] CAID: 09AF ECM_PID: 1F01 PROVID: 000000
2014/04/05 15:43:46 2B7284E8 c stapi: [ADD PID 3] CAID: 098C ECM_PID: 1A01 PROVID: 000000
2014/04/05 15:43:46 2B7284E8 c stapi: new program number: 0072 (Sky Sport HD 2)
2014/04/05 15:43:47 2B7284E8 c anonymous (1833&000000/0072/8922F): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2014/04/05 15:43:47 2B7284E8 c anonymous (09C4&000000/0072/B385B): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2014/04/05 15:43:47 2B7284E8 c anonymous (09AF&000000/0072/92:B495): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2014/04/05 15:43:47 2AF284E8 p connecting to 192.168.1.113
2014/04/05 15:43:47 2AF284E8 p connect(fd=22) failed: (errno=103 Software caused connection abort)
2014/04/05 15:43:47 2AF284E8 p cccam-reader network connect error!
2014/04/05 15:43:47 2B7284E8 c stapi: try pids again #1
2014/04/05 15:43:47 2B7284E8 c anonymous (098C&000000/0072/98:FE76): rejected reader peer (102 ms) by cccam-reader (of 1 avail 1)
2014/04/05 15:43:47 2B7284E8 c stapi: set_filter: dev: 2 FAl: 0 FAs: 0 FS: 852049
2014/04/05 15:43:47 2B7284E8 c anonymous (1833&000000/0072/8922F): rejected group (0 ms) (of 0 avail 0) (no matching reader)

 

[4gx35]

AW: Probleme UFS 912 und Futro-Server

das ist aber eine uralte oscam, bitte mal aktualisieren,
es ist aber ohne log vom server nicht klar, ob dort die karte überhaupt gelesen wird,
also log vom server notwendig, configs vom receiver ebenso

 

[smeerlap]

AW: Probleme UFS 912 und Futro-Server

Welche configs genau?

Log-Server:

Spoiler

>> OSCam << cardserver started at Sat Apr 5 18:20:29 2014
-------------------------------------------------------------------------------
2014/04/05 18:20:29 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r789 (i486-linux-gnu)
2014/04/05 18:20:29 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 13592
2014/04/05 18:20:29 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/04/05 18:20:29 0 s signal handling initialized
2014/04/05 18:20:29 0 s newcamd: initialized (fd=5, port=22000)
2014/04/05 18:20:29 0 s -> CAID: 1830 PROVID: 003411
2014/04/05 18:20:29 0 s cccam: initialized (fd=6, port=21000)
2014/04/05 18:20:29 0 s camd3emu [cs357x] creating thread for device 127.0.0.1
2014/04/05 18:20:29 0 s V14 [mouse] creating thread for device /dev/v14
2014/04/05 18:20:29 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/04/05 18:20:29 0 s waiting for local card init
2014/04/05 18:20:29 9DEB2F8 p cs357x proxy 127.0.0.1:12345
2014/04/05 18:20:29 9DEB2F8 p camd3emu [cs357x] proxy initialized, server 127.0.0.1:12345
2014/04/05 18:20:29 9E1B210 h webif: decompressed 69662 bytes back into 195704 bytes
2014/04/05 18:20:29 9E1B210 h load ssl certificate file /var/etc/oscam.pem
2014/04/05 18:20:29 9E1B210 h HTTP Server running. ip=0.0.0.0 port=16002 (SSL)
2014/04/05 18:20:29 9DECF98 r V14 [mouse] Reader initialized (device=/dev/v14, detect=cd, mhz=357, cardmhz=357)
2014/04/05 18:20:30 9DECF98 r V14 [mouse] card detected
2014/04/05 18:20:31 9DECF98 r V14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/04/05 18:20:31 9DECF98 r V14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/04/05 18:20:31 9DECF98 r V14 [mouse] Setting baudrate to 153600 bps
2014/04/05 18:20:31 9DECF98 r V14 [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2014/04/05 18:20:31 9DECF98 r V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/04/05 18:20:32 9DECF98 r V14 [mouse] Card type: P1TV
2014/04/05 18:20:32 9DECF98 r V14 [mouse] Rom version: 20AA
2014/04/05 18:20:32 9DECF98 r V14 [mouse] parental lock setting: FF FF FF FF
2014/04/05 18:20:32 9DECF98 r V14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/04/05 18:20:32 9DECF98 r V14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2014/04/05 18:20:32 9DECF98 r V14 [mouse] ready for requests
2014/04/05 18:20:32 9DECF98 r V14 [mouse] found card system videoguard2
2014/04/05 18:20:32 9DECF98 r V14 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/04/05 18:20:32 9DECF98 r V14 [videoguard2] card detected
2014/04/05 18:20:32 9DECF98 r V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/04/05 18:20:32 9DECF98 r V14 [videoguard2] tier: 0046, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:32 9DECF98 r V14 [videoguard2] tier: 005d, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:32 9DECF98 r V14 [videoguard2] tier: 005e, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:32 9DECF98 r V14 [videoguard2] tier: 0065, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 0066, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 0067, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 0068, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 0069, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 006a, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 006b, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 006f, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 007b, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 007d, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 0081, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 008e, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 00c0, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 00c7, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 00c8, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 00c9, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 00ca, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 00e4, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 00e5, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 00f3, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 00fa, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:33 9DECF98 r V14 [videoguard2] tier: 00ff, expiry date: 2014/07/31-01:00:00
2014/04/05 18:20:35 0 s init for all local cards done
2014/04/05 18:20:35 0 s anti cascading disabled

 

[4gx35]

AW: Probleme UFS 912 und Futro-Server

naja, es sind normalerweise 3 oscam configs, aber evtl noch oscam.dvbapi, die kann alles verhindern

 

[smeerlap]

AW: Probleme UFS 912 und Futro-Server

osram.dvbapi (keine Ädnerungen vorgenommen)

############## oscam.dvbapi ####################

Spoiler

#
S: PTI0 pmt_PTI0.tmp
S: PTI1 pmt_PTI1.tmp
S: PTI2 pmt_PTI2.tmp
#
pmt_mode = 4
#
######### P = Priority ## I = Ignores ##########
#
# Sky Germany S02 Card
P: 1702 # prio Sky s02
P: 1833 # prio Sky s02
I: 09C4 # ignore Sky v13
#
# HDplus HD02 Card (black)
P: 1843:000000 # prio HD02 HD+
P: 1843:003411 # prio HD02 HD+
I: 1830 # ignore HD01 HD+
#
I: 0 # ignore all other Caid
#################################################

 

[4gx35]

AW: Probleme UFS 912 und Futro-Server

das ist schon mal ein fehler, das nicht zu ändern,
da gehört
P: 098c und
I: 0 rein rest weg, dann geht es hoffentlich

 

[dodo83]

AW: Probleme UFS 912 und Futro-Server

ist das die oscam.dvbapi vom UFS?

I: 0 # ignore all other Caid

mit dem eintrag blockst du alles was du vorher nicht mit einem P: priorisierst, somit auch deine 098C
änder mal die so ab

Spoiler

[COLOR=#3E3E3E]############## oscam.dvbapi ####################[/COLOR]
[COLOR=#3E3E3E]#[/COLOR]
[COLOR=#3E3E3E]S: PTI0 pmt_PTI0.tmp[/COLOR]
[COLOR=#3E3E3E]S: PTI1 pmt_PTI1.tmp[/COLOR]
[COLOR=#3E3E3E]S: PTI2 pmt_PTI2.tmp[/COLOR]
[COLOR=#3E3E3E]#[/COLOR]
[COLOR=#3E3E3E]pmt_mode = 4[/COLOR]
[COLOR=#3E3E3E]#[/COLOR]
[COLOR=#3E3E3E]######### P = Priority ## I = Ignores ##########[/COLOR]

P: 098C
I: 0

[COLOR=#3E3E3E]#################################################[/COLOR]

wenn du noch andere caids im share hast einfach mit einem P: vor dem I: priorisieren

 

[smeerlap]

AW: Probleme UFS 912 und Futro-Server

funktioniert leider weiterhin nicht
hab sie so wie du geschrieben hast übernommen

 

[4gx35]

AW: Probleme UFS 912 und Futro-Server

Link ist nicht mehr aktiv., dann per webif den reader bearbeiten,
denn account gibt es schon lange nicht mehr, nur user password

nach oscam.dvbapi änderung cam neu gestartet?

 

[smeerlap]

AW: Probleme UFS 912 und Futro-Server

ich find nichts neueres bei dem steht das das für ufs 912 geeignet ist

 

[4gx35]

AW: Probleme UFS 912 und Futro-Server

auch die 9550, alle versionen sind sog. unstable, weil es immer wieder neue gibt

 

[smeerlap]

steh mir gerade aufm Schlauch ... das ist doch nur eine einzelne Datei ? Wo soll ich die den hinkopieren ?

 

[4gx35]

AW: Probleme UFS 912 und Futro-Server

wo die alte liegt, /var/emu oder /usr/bin nachsehen, attribute 755 setzen

 

[smeerlap]

ok habs gefunden...probier dann nochmal

so hab jetzt das ein neueres installiert.
anbei die Konfigs:

oscam.server

Spoiler

############### General Instruction - oscam.server ###################
# To activate/deactivate the reader set enable = 1/0 #
# #
# You might specify further entries in each reader section #
# such as "caid =________" and/or "services = _________" but you needn´t #
# For further details see the OSCAM documentation #
############################################################################

Spoiler

######################### Internal Readers ###############################
# Default Config should work with Seca, Conax, Cryptoworks, Viaccess, NDS #
# #
# For Irdeto, Betacrypt just activate "cardmhz=600" by removing the "#" #
# #
# For Nagra activate and set the correct "rsakey = " and "boxkey = " en #
# examples for HDplus HD02 and Sky S02 are included #
# #
# for specific Smartcards such as TIGER or Viaccess with AES-Key #
# see the OSCAM documentation #
############################################################################
[reader]
enable = 0
description = Set as HD plus HD01
Label = Intern_Upper_HD01
Protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1830
cardmhz = 368
mhz = 368
rsakey = BF........................................................4DD5
boxkey = A7...........................C


[reader]
enable = 0
description = Set as HD plus HD02
Label = Intern_Upper_HD02
Protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1843
cardmhz = 368
mhz = 368
rsakey = BF.....................................................A4DD5
boxkey = A76......................................7C


[reader]
enable = 0
description = Set as Sky S02
label = Intern_Upper_S02
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1702
cardmhz = 600
mhz = 600


[reader]
enable = 0
description = Set as Sky V13
label = Intern_Upper_V13
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = CD
# card not init. use other mhz 343,357,480,500 or 686....
mhz = 343
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
ndsversion = 2


[reader]
enable = 0
description = Set as Sky V14
label = Intern_Upper_V14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
# card not init. use other mhz 343,357,480,500 or 686....
mhz = 343
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
ndsversion = 2


#################### External Readers / SMARGO ########################
# Important !!!! Use SMARGO Firmware 1.4 or 1.5 #
# With regard to your Smartcard set up the Reader/Smargo as follows: #
# #
# For Seca, Conax, Cryptoworks, Viaccess, NDS, Nagra #
# Frequency Fixed 3,69 Mhz / Normal / T=0 / EGT = 0 #
# #
# For Irdeto, Betacrypt #
# Frequency Fixed 6,0Mhz / Normal / T=1 / EGT = 0 #
# #
# If SMARGO ist in Autoswitch mode, than activate fitting mhz/cardmhz- #
# Entries in the reader-Section #
# #
# For Nagra activate and complete the "rsakey = " and "boxkey = " and #
# and remove the # in the smargopatch = 1 line #
# example for HDplus is included #
# #
# for specific Smartcards such as TIGER or Viaccess with AES-Key #
# see the OSCAM documentation #
############################################################################


[reader]
enable = 0
description = Set as HD plus HD02
label = Extern_0_HD02
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
smargopatch = 1
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
#mhz = 357
#cardmhz = 357


[reader]
enable = 0
description = Set as Sky S02
label = Extern_0_S02
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1702
#mhz = 600
#cardmhz = 600


[reader]
enable = 0
description = Set as Sky V14
label = Extern_0_V14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
group = 1
emmcache = 1,1,2
ndsversion = 2
#mhz = 357
#cardmhz = 357




######################### Remote Readers ##############################
# Important !!!! Use this or not in personal responsibility #
# #
# #
# For further details see the OSCAM documentation #
############################################################################
[reader]
enable = 1
label = cccam-reader
protocol = cccam
device = 192.168.1.113,12000
user = xxxx
password = xxxx
group = 1
emmcache = 1,1,2
cccmaxhop = 5
cccversion = 2.0.11


[reader]
enable = 0
label = camd35-reader
protocol = camd35
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2


[reader]
enable = 0
label = newcamd-reader
protocol = newcamd
key = 0102030405060708091011121314
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2


######## end of file ########

oscam.dvbapi

Spoiler

P: 098C
I: 0

oscam.user

Spoiler

[account]
user = dvbapi
pwd = dvbapi
group = 1
au = 1
uniq = 0
betatunnel = 1833.FFFF:1702,1834.FFFF:1722

Leider bleibt das Bild schwarz.
Ist noch eine Einstellung falsch?
Gibt es Log-Dateien wo ich mehr sehen kann?

So jetzt läuft es. Die Gruppe war noch nicht richtig. Kann aber auf dem Client keine los finden. Ist das richtig?

Gesendet von meinem D5503 mit Tapatalk

 

[smeerlap]

Gibt es Log-Dateien wo ich mehr sehen kann?