Problem v14 - Error activating card

[sknoedl]

Hallo zusammen,
ich hoffe mir kann hier jemand helfen. Bin nun schon über 2 Wochen dabei auf einer FB 7270 einen oscam Server einzurichten. Mittlerweile weiß ich nicht mehr weiter. Es kommt immer "Error activating card". Hier mal meine Einstellungen

Oscam Config

Spoiler

[global]
logfile = /var/media/ftp/uStor00/logs/oscam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 1000
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5

[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 30
monlevel = 1
appendchaninfo = 0

#[newcamd]
#port = 34001@1830:003411
#key = 0102030405060708091011121314
#allowed = 0.0.0.0-255.255.255.255
#keepalive = 0
#mgclient = 0

[cccam]
port = 12000
reshare = 0
version = 2.2.1

[webif]
httpport = 83
httpcss = /var/media/ftp/uStor00/service/oscam/style.css
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255
httphideidleclients = 1
httpreadonly = 0

Oscam Server

Spoiler

[reader]
label = skyv14
enable = 1
protocol = mouse
device = /dev/ttyUSB0
group = 1
boxid = 12345678
detect = cd
ecmcache = 1,1,2
caid = 098C
mhz = 357
cardmhz = 357
ins7e11 = 15

Oscam User

Spoiler

[account]
user = rudi
pwd = rebel
caid = 098C
uniq = 3
au = skyv14
group = 1

Hier noch das Logfile

Spoiler

2000/01/01 02:29:25 0 s starting thread log_list_thread
2000/01/01 02:29:25 0 s log_list_thread thread started
2000/01/01 02:29:25 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6593 (mips-unknown-unknown)
2000/01/01 02:29:25 0 s version=1.20-unstable_svn, build #6593, system=mips-unknown-unknown, nice=-1
2000/01/01 02:29:25 0 s client max. idle=120 sec, debug level=0
2000/01/01 02:29:25 0 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2000/01/01 02:29:25 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2000/01/01 02:29:25 0 s The current system time is smaller than the build date (Apr 7 2012). Waiting up to 60 seconds for time to correct
2000/01/01 02:30:26 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 02:30:26 0 s services reloaded: 0 services freed, 5 services loaded, rejected 0
2000/01/01 02:30:26 0 s userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
2000/01/01 02:30:26 0 s signal handling initialized (type=sysv)
2000/01/01 02:30:26 0 s 181 service-id's loaded in 6ms
2000/01/01 02:30:26 0 s 116 tier-id's loaded
2000/01/01 02:30:26 0 s 4 provid's loaded
2000/01/01 02:30:26 0 s 22 lengths for caid guessing loaded
2000/01/01 02:30:27 0 s can't open whitelist file /var/media/ftp/uStor00/service/oscam//oscam.whitelist
2000/01/01 02:30:27 0 s can't open cacheex-matcher file /var/media/ftp/uStor00/service/oscam//oscam.cacheex
2000/01/01 02:30:27 0 s Starting listener 0
2000/01/01 02:30:27 0 s monitor: initialized (fd=7, port=988)
2000/01/01 02:30:27 0 s Starting listener 0
2000/01/01 02:30:27 0 s camd35: disabled
2000/01/01 02:30:27 0 s Starting listener 0
2000/01/01 02:30:27 0 s cs378x: disabled
2000/01/01 02:30:27 0 s Starting listener 0
2000/01/01 02:30:27 0 s newcamd: disabled
2000/01/01 02:30:27 0 s Starting listener 0
2000/01/01 02:30:27 0 s cccam: initialized (fd=8, port=12000, crypted)
2000/01/01 02:30:27 0 s Starting listener 0
2000/01/01 02:30:27 0 s pandora: disabled
2000/01/01 02:30:27 0 s Starting listener 0
2000/01/01 02:30:27 0 s csp: disabled
2000/01/01 02:30:27 0 s Starting listener 0
2000/01/01 02:30:27 0 s radegast: disabled
2000/01/01 02:30:27 0 s starting thread http
2000/01/01 02:30:27 0 s http thread started
2000/01/01 02:30:27 0 s starting thread reader check
2000/01/01 02:30:27 0 s reader check thread started
2000/01/01 02:30:27 0 s starting thread check
2000/01/01 02:30:27 0 s check thread started
2000/01/01 02:30:27 5770C8 h HTTP Server listening on port 83
2000/01/01 02:30:27 0 s creating thread for device /dev/ttyUSB0
2000/01/01 02:30:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2000/01/01 02:30:27 0 s waiting for local card init
2000/01/01 02:30:29 5758D0 r reader skyv14 initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2000/01/01 02:30:30 5758D0 r skyv14 card detected
2000/01/01 02:30:40 5758D0 r Error activating card.
2000/01/01 02:30:51 5758D0 r Error activating card.
2000/01/01 02:31:02 5758D0 r Error activating card.
2000/01/01 02:31:02 5758D0 r card initializing error
2000/01/01 02:31:03 0 s init for all local cards done
2000/01/01 02:31:03 0 s anti cascading disabled

Ich hoffe einer von euch kann mir da weiterhelfen.

 

[laila-no1]

AW: Problem v14 - Error activating card

MOin,

mach deinen Reader mal so und starte danach die Fritte neu nicht nur Oscam.

Spoiler

[reader]
label                         = v14
description                   = V14
protocol                      = mouse
device                        = /dev/ttyUSB0
caid                          = 098C
boxid                         = 12345678
ins7e11                       = 15
detect                        = cd
group                         = 1
emmcache                      = 1,1,2
blockemm-unknown              = 1
ndsversion                    = 2

welchen Cardreader hast du im Einsatz?
und wie ist der eingestellt?

lg, Laila

 

[Bodo-1]

Wie stehen denn deine dip Schalter der mouse ?
Als 2. fällt mir auf das deine oscam Build schon sehr alt ist , könnte sein das diese den fastmode noch nicht unterstützt !

Also oscam mal Updaten als erstes !

Bodo


Sent from my iPhone using Tapatalk

 

[laila-no1]

AW: Problem v14 - Error activating card

stimmt deine Oscam is ja schon etwas angestaubt.

Ab Oscam Version 6064 ist es möglich NDS Karten mit dem Parameter ins7e11 zu übertakten!

Sie müssen registriert sein, um Links zu sehen.

sollte dann eigentlich mit deiner Version schon gehen...aber wie Bodo schon schrieb wechsle mal auf was Neueres.

lg, Laila

 

[sknoedl]

AW: Problem v14 - Error activating card

Hallo Leila,
mit welcher Datei kann ich Oscam denn updaten. Bin mir da nich sicher, welche ich nehmen muss. Könntest du mir eventuell einen Link senden.
Als Reader habe ich den Smargo. Einstellungen weiß ich jetzt nich ganz ganau.

 

[sknoedl]

AW: Problem v14 - Error activating card

So, hab Oscam jetzt mal geupdated. Karte geht aber immer noch nicht. Hier der Logfile

Spoiler

2000/01/01 01:02:09 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8999 (mipsel-linux-uclibc-ssl-libusb-pcsc)
2000/01/01 01:02:09 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3383
2000/01/01 01:02:09 0 s The current system time is smaller than the build date (Oct 26 2013). Waiting up to 60 seconds for time to correct
2000/01/01 01:03:11 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:03:11 0 s services reloaded: 0 services freed, 5 services loaded, rejected 0
2000/01/01 01:03:11 0 s userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
2000/01/01 01:03:11 0 s signal handling initialized
2000/01/01 01:03:11 0 s 181 service-id's loaded in 10ms
2000/01/01 01:03:11 0 s 116 tier-id's loaded
2000/01/01 01:03:11 0 s 4 provid's loaded
2000/01/01 01:03:11 0 s 22 lengths for caid guessing loaded
2000/01/01 01:03:11 0 s monitor: initialized (fd=7, port=988)
2000/01/01 01:03:11 0 s cccam: initialized (fd=8, port=12000)
2000/01/01 01:03:11 50B498 h webif: decompressed 54473 bytes back into 155840 bytes
2000/01/01 01:03:11 50B498 h HTTP Server running. ip=0.0.0.0 port=83
2000/01/01 01:03:11 0 s v14 [mouse] creating thread for device /dev/ttyUSB0
2000/01/01 01:03:11 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2000/01/01 01:03:11 0 s waiting for local card init
2000/01/01 01:03:11 547DC0 r v14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2000/01/01 01:03:12 547DC0 r v14 [mouse] card detected
2000/01/01 01:03:16 547DC0 r v14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2000/01/01 01:03:16 547DC0 r v14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2000/01/01 01:03:16 547DC0 r v14 [mouse] Setting baudrate to 153600 bps
2000/01/01 01:03:16 547DC0 r v14 [mouse] Calculated work ETU is 6.51 us
2000/01/01 01:03:17 547DC0 r v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz)
2000/01/01 01:03:20 547DC0 r v14 [mouse] card system not supported
2000/01/01 01:03:20 547DC0 r v14 [mouse] Normal mode failed, reverting to Deprecated Mode
2000/01/01 01:03:24 547DC0 r v14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2000/01/01 01:03:24 547DC0 r v14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2000/01/01 01:03:24 547DC0 r v14 [mouse] Calculated work ETU is 104.20 us
2000/01/01 01:03:25 547DC0 r v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz)
2000/01/01 01:03:28 547DC0 r v14 [mouse] card system not supported
2000/01/01 01:03:28 547DC0 r v14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2000/01/01 01:03:28 547DC0 r v14 [mouse] card initializing error
2000/01/01 01:03:29 0 s init for all local cards done
2000/01/01 01:03:29 0 s anti cascading disabled

Weiß jemand, an was das liegen kann?

 

[laila-no1]

AW: Problem v14 - Error activating card

hi,

jetzt wäre halt noch interessant wie du deinen Smargo eingestellt hast mit dem Smartreadertool.?
und welche Firmware auf dem Smargo ist.


PS: was ich noch so weiss vom Smargo ist es zwingend notwendig diesen mit der richtigen Smartreadertool-Soft zu konfigurieren.
Da ich aber nur mehr Easymouse 2 Premium nutze kann ich dir da auch nicht mehr wirklich weiterhelfen.
Es gibt aber sicher genug User die mit Smargos arbeiten.

lg, Laila

 

[sknoedl]

AW: Problem v14 - Error activating card

so, habe jetzt die Einstellungen für den Smargo herausgefunden.
Firmware ist 1.3

Einstellungen
Auto
Dreambox
T=0

 

[sknoedl]

AW: Problem v14 - Error activating card

hab den Smargo jetzt umgestellt auf


Auto
Normal
T=1


und auf 1.7 geupdated. Leider funktioniert es immer noch nicht. Ich bin langsam am verzweifeln. hier nochmal was ich aktuell eingestellt habe.


logfile

Spoiler

2000/01/01 01:01:53 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3370
2000/01/01 01:01:53 0 s The current system time is smaller than the build date (Oct 26 2013). Waiting up to 60 seconds for time to correct
2000/01/01 01:02:54 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:02:54 0 s services reloaded: 0 services freed, 5 services loaded, rejected 0
2000/01/01 01:02:54 0 s userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
2000/01/01 01:02:54 0 s signal handling initialized
2000/01/01 01:02:54 0 s 181 service-id's loaded in 10ms
2000/01/01 01:02:54 0 s 23 tier-id's loaded
2000/01/01 01:02:54 0 s 4 provid's loaded
2000/01/01 01:02:54 0 s 22 lengths for caid guessing loaded
2000/01/01 01:02:54 0 s monitor: initialized (fd=6, port=988)
2000/01/01 01:02:54 0 s cccam: initialized (fd=7, port=12000)
2000/01/01 01:02:55 0 s v14 [mouse] creating thread for device /dev/ttyUSB0
2000/01/01 01:02:55 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2000/01/01 01:02:55 0 s waiting for local card init
2000/01/01 01:02:55 509490 h webif: decompressed 54473 bytes back into 155840 bytes
2000/01/01 01:02:55 509490 h HTTP Server running. ip=0.0.0.0 port=83
2000/01/01 01:02:55 545B10 r v14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2000/01/01 01:02:56 545B10 r v14 [mouse] card detected
2000/01/01 01:02:58 545B10 r v14 [mouse] ATR: 3F FD 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50
2000/01/01 01:02:59 545B10 r v14 [mouse] Warning: D=0 is invalid, forcing D=1
2000/01/01 01:02:59 545B10 r v14 [mouse] Init card protocol T5, FI=3, F=744, D=1, N=21
2000/01/01 01:02:59 545B10 r v14 [mouse] Setting baudrate to 4800 bps
2000/01/01 01:02:59 545B10 r v14 [mouse] Calculated work ETU is 208.40 us
2000/01/01 01:02:59 545B10 r v14 [mouse] ERROR: Parse_ATR returned error
2000/01/01 01:02:59 545B10 r v14 [mouse] Error activating card.
2000/01/01 01:03:02 545B10 r v14 [mouse] ATR: 3F F0 3F FD 15 25 02 50
2000/01/01 01:03:03 545B10 r v14 [mouse] Warning: D=0 is invalid, forcing D=1
2000/01/01 01:03:03 545B10 r v14 [mouse] Init card protocol T5, FI=3, F=744, D=1, N=21
2000/01/01 01:03:03 545B10 r v14 [mouse] Setting baudrate to 4800 bps
2000/01/01 01:03:03 545B10 r v14 [mouse] Calculated work ETU is 208.40 us
2000/01/01 01:03:03 545B10 r v14 [mouse] ERROR: Parse_ATR returned error
2000/01/01 01:03:03 545B10 r v14 [mouse] Error activating card.
2000/01/01 01:03:06 545B10 r v14 [mouse] ATR: 3F FC 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00
2000/01/01 01:03:07 545B10 r v14 [mouse] Warning: D=0 is invalid, forcing D=1
2000/01/01 01:03:07 545B10 r v14 [mouse] Init card protocol T5, FI=3, F=744, D=1, N=21
2000/01/01 01:03:07 545B10 r v14 [mouse] Setting baudrate to 4800 bps
2000/01/01 01:03:07 545B10 r v14 [mouse] Calculated work ETU is 208.40 us
2000/01/01 01:03:07 545B10 r v14 [mouse] ERROR: Parse_ATR returned error
2000/01/01 01:03:07 545B10 r v14 [mouse] Error activating card.
2000/01/01 01:03:08 545B10 r v14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2000/01/01 01:03:08 545B10 r v14 [mouse] card initializing error
2000/01/01 01:03:08 0 s init for all local cards done
2000/01/01 01:03:08 0 s anti cascading disabled

conf

Spoiler

[global]
logfile = /var/media/ftp/uStor00/logs/oscam.log
disablelog = 1
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 1000
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5


[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
hideclient/to = 30
monlevel = 1
appendchaninfo = 0


#[newcamd]
#port = 34001@1830:003411
#key = 0102030405060708091011121314
#allowed = 0.0.0.0-255.255.255.255
#keepalive = 0
#mgclient = 0


[cccam]
port = 12000
reshare = 0
version = 2.2.1


[webif]
httpport = 83
httpcss = /var/media/ftp/uStor00/service/oscam/style.css
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255
httphideidleclients = 1
httpreadonly = 0

server

Spoiler

[reader]
label = v14
description = V14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
ndsversion = 2

user

Spoiler

[account]
user = user
pwd = pwd
caid = 098C
uniq = 3
au = skyv14
group = 1

Vielleicht weiss ja von euch noch jemand was.

Du musst angemeldet sein, um Bilder zu sehen.

 

[mxer]

AW: Problem v14 - Error activating card

Wen Du die 1.07 drauf hast, dann gibts doch die Möglichkeit, dem eine Seriennummer zu verpassen.
Außerdem muß Kernel = NEW eingestellt werden.

 

[sknoedl]

AW: Problem v14 - Error activating card

den Kernel habe ich auf New stehen. muss ich die Seriennummer eingeben?

 

[mxer]

AW: Problem v14 - Error activating card

Ganz unten ist ein freies Feld, dort kannst Du eine vergeben.
Speichern nicht vergessen.

Achso, T = 0 wäre richtig.

 

[sknoedl]

AW: Problem v14 - Error activating card

wie muss ich die dann im reader eintragen?

 

[sknoedl]

AW: Problem v14 - Error activating card

Es läuft!!!!!!!

Ich habe jetzt nur den reader auf smargo umgestellt, und schon ging es. Jetzt müssten nur noch die Umschaltzeiten etwas besser sein, dann wäre es perfekt. Weiss jemand, wie man die schneller hinkriegt?

 

[Deleted member 637758]

AW: Problem v14 - Error activating card

Wie sieht denn aktuell deine oscam.server aus?