Problem mit Oscam

TThiesie · 13. Juni 2014

AW: Problem mit Oscam

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Jun 13 23:06:46 2014
-------------------------------------------------------------------------------
2014/06/13 23:06:46 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9761 (mipsel-oe-linux)
2014/06/13 23:06:46 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 30678
2014/06/13 23:06:46 0 s couldn't open statistics file: /media/usb/oscam/user.log
2014/06/13 23:06:46 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/06/13 23:06:46 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/13 23:06:46 0 s signal handling initialized
2014/06/13 23:06:46 0 s hd01 [internal] creating thread for device /dev/sci0
2014/06/13 23:06:46 0 s S02 [internal] creating thread for device /dev/sci1
2014/06/13 23:06:46 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/06/13 23:06:46 0 s waiting for local card init
2014/06/13 23:06:46 6B1FC8 r hd01 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/06/13 23:06:46 6B3DF8 r S02 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2014/06/13 23:06:46 6A9DA8 h webif: decompressed 151915 bytes back into 363072 bytes
2014/06/13 23:06:46 6A9DA8 h HTTP Server running. ip=0.0.0.0 port=9001
2014/06/13 23:06:47 6B1FC8 r hd01 [internal] card detected
2014/06/13 23:06:47 6B3DF8 r S02 [internal] card detected
2014/06/13 23:06:48 6B1FC8 r hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/06/13 23:06:48 6B1FC8 r hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/13 23:06:48 6B1FC8 r hd01 [internal] TEST tempo mhz check = 500 mhz
2014/06/13 23:06:48 6B1FC8 r hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/06/13 23:06:48 6B1FC8 r hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/13 23:06:48 6B1FC8 r hd01 [internal] Card responded ok for ifsd request of 251
2014/06/13 23:06:49 6B1FC8 r hd01 [internal] detect native nagra card
2014/06/13 23:06:49 6B3DF8 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/06/13 23:06:49 6B3DF8 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/06/13 23:06:49 6B3DF8 r S02 [internal] TEST tempo mhz check = 600 mhz
2014/06/13 23:06:49 6B3DF8 r S02 [internal] Calculated work ETU is 103.33 us reader mhz = 540
2014/06/13 23:06:50 6B3DF8 r S02 [internal] PLL Reader: ATR Fsmax is 6 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/13 23:06:50 6B1FC8 r hd01 [internal] found card system nagra
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] ROM: D N A S P 1 4 2
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] REV: R e v G C 6
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] SER: ############
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] CAID: 1830
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] Prv.ID: 00 00 00 00
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] IRD ID: ############
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] active to: 2014/08/04 12:59
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] -----------------------------------------
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] |id |tier |valid from |valid to |
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] +----+--------+------------+------------+
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] |8011|0064 |2011/12/25 |2012/12/25 |
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] |8011|0BEA |2012/12/26 |2015/02/17 |
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] -----------------------------------------
2014/06/13 23:06:50 6B1FC8 r hd01 [nagra] ready for requests
2014/06/13 23:06:51 6B3DF8 r S02 [internal] detect irdeto tunneled nagra card
2014/06/13 23:06:51 6B3DF8 r S02 [internal] no rsa key configured -> using irdeto mode
2014/06/13 23:06:51 6B3DF8 r S02 [internal] detect irdeto card
2014/06/13 23:06:51 6B3DF8 r S02 [internal] caid: 1702, acs: 3.84, country code: GER
2014/06/13 23:06:51 6B3DF8 r S02 [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/06/13 23:06:54 6B3DF8 r S02 [internal] WARNING: For Irdeto cards you will have to set 'cardmhz = 600' in oscam.server
2014/06/13 23:06:54 6B3DF8 r S02 [internal] active providers: 2 (000000,000000)
2014/06/13 23:06:54 6B3DF8 r S02 [internal] found card system irdeto
2014/06/13 23:06:54 6B3DF8 r S02 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/06/13 23:06:54 6B3DF8 r S02 [irdeto] entitlements for provider: 2, id: 000000
2014/06/13 23:06:54 6B3DF8 r S02 [irdeto] chid: 05E8, date: 2012/09/08 - 2013/05/20
2014/06/13 23:06:54 6B3DF8 r S02 [irdeto] chid: 7D27, date: 2012/09/08 - 2013/05/20
2014/06/13 23:06:54 6B3DF8 r S02 [irdeto] chid: 05FB, date: 2012/09/08 - 2013/05/20
2014/06/13 23:06:54 6B3DF8 r S02 [irdeto] chid: 0608, date: 2013/10/01 - 2014/06/12
2014/06/13 23:06:54 6B3DF8 r S02 [irdeto] chid: 04CE, date: 2012/09/08 - 2013/05/20
2014/06/13 23:06:54 6B3DF8 r S02 [irdeto] chid: 000F, date: 2012/09/08 - 2013/05/20
2014/06/13 23:06:54 6B3DF8 r S02 [irdeto] chid: 00F0, date: 2012/09/08 - 2013/05/20
2014/06/13 23:06:54 6B3DF8 r S02 [irdeto] chid: 05F1, date: 2012/09/08 - 2013/05/20
2014/06/13 23:06:54 6B3DF8 r S02 [irdeto] chid: 0102, date: 2008/09/26 - 2008/10/12
2014/06/13 23:06:54 6B3DF8 r S02 [irdeto] chid: 026C, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 028B, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 028C, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 028D, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 028E, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 028F, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 0290, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 029E, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 0291, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 0292, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 0293, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 0294, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 0295, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 028A, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 0298, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 0299, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 029A, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 029B, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 029C, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 05DD, date: 2012/09/08 - 2013/05/20
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 0103, date: 2008/09/26 - 2008/10/12
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 029C, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 0104, date: 2008/09/26 - 2008/10/12
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 0406, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 0105, date: 2008/09/26 - 2008/10/12
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 0004, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 0276, date: 2012/09/08 - 2013/05/20
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 05DE, date: 2012/09/08 - 2013/05/20
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 029D, date: 2008/01/19 - 2008/01/21
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 05DF, date: 2012/09/08 - 2013/05/20
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] chid: 05E7, date: 2012/09/08 - 2013/05/20
2014/06/13 23:06:55 6B3DF8 r S02 [irdeto] ready for requests
2014/06/13 23:06:56 0 s init for all local cards done
2014/06/13 23:06:56 0 s anti cascading disabled
2014/06/13 23:06:56 6B9248 c plain dvbapi-client granted (DVBApiUser, au=auto (2 reader))
2014/06/13 23:06:56 6B9248 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1

janni1 · 13. Juni 2014

AW: Problem mit Oscam

Hi,
beide Karten werden nun sauber erkannt!
Mach noch folgenden Eintrag in den DvbapiUser in der oscam.user

betatunnel = 1833.FFFF:1702

damit auch die HD-Sender von sky gehen.

Gruß
janni1

TThiesie · 13. Juni 2014

AW: Problem mit Oscam

Also HD+ und Sky funzt nur Sky HD nicht.

betatunnel = 1833.FFFF:1702

habe ich geändert.

nochmal ein Log

>> OSCam << cardserver started at Fri Jun 13 23:23:44 2014
-------------------------------------------------------------------------------
2014/06/13 23:23:44 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9761 (mipsel-oe-linux)
2014/06/13 23:23:44 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 32297
2014/06/13 23:23:44 0 s couldn't open statistics file: /media/usb/oscam/user.log
2014/06/13 23:23:44 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/06/13 23:23:44 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/13 23:23:44 0 s signal handling initialized
2014/06/13 23:23:44 0 s hd01 [internal] creating thread for device /dev/sci0
2014/06/13 23:23:44 0 s S02 [internal] creating thread for device /dev/sci1
2014/06/13 23:23:44 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/06/13 23:23:44 0 s waiting for local card init
2014/06/13 23:23:44 C55DF8 r S02 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2014/06/13 23:23:44 C53FC8 r hd01 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/06/13 23:23:44 C4BDA8 h webif: decompressed 151915 bytes back into 363072 bytes
2014/06/13 23:23:44 C4BDA8 h HTTP Server running. ip=0.0.0.0 port=9001
2014/06/13 23:23:45 C53FC8 r hd01 [internal] card detected
2014/06/13 23:23:45 C55DF8 r S02 [internal] card detected
2014/06/13 23:23:46 C53FC8 r hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/06/13 23:23:46 C53FC8 r hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/13 23:23:46 C53FC8 r hd01 [internal] TEST tempo mhz check = 500 mhz
2014/06/13 23:23:46 C53FC8 r hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/06/13 23:23:46 C53FC8 r hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/13 23:23:46 C53FC8 r hd01 [internal] Card responded ok for ifsd request of 251
2014/06/13 23:23:47 C53FC8 r hd01 [internal] detect native nagra card
2014/06/13 23:23:48 C55DF8 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/06/13 23:23:48 C55DF8 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/06/13 23:23:48 C55DF8 r S02 [internal] TEST tempo mhz check = 600 mhz
2014/06/13 23:23:48 C55DF8 r S02 [internal] Calculated work ETU is 103.33 us reader mhz = 540
2014/06/13 23:23:48 C55DF8 r S02 [internal] PLL Reader: ATR Fsmax is 6 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/13 23:23:48 C53FC8 r hd01 [internal] found card system nagra
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] ROM: D N A S P 1 4 2
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] REV: R e v G C 6
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] SER: ############
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] CAID: 1830
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] Prv.ID: 00 00 00 00
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] IRD ID: ############
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] active to: 2014/08/04 12:59
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] -----------------------------------------
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] |id |tier |valid from |valid to |
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] +----+--------+------------+------------+
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] |8011|0064 |2011/12/25 |2012/12/25 |
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] |8011|0BEA |2012/12/26 |2015/02/17 |
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] -----------------------------------------
2014/06/13 23:23:48 C53FC8 r hd01 [nagra] ready for requests
2014/06/13 23:23:49 C55DF8 r S02 [internal] detect irdeto tunneled nagra card
2014/06/13 23:23:49 C55DF8 r S02 [internal] no rsa key configured -> using irdeto mode
2014/06/13 23:23:49 C55DF8 r S02 [internal] detect irdeto card
2014/06/13 23:23:49 C55DF8 r S02 [internal] caid: 1702, acs: 3.84, country code: GER
2014/06/13 23:23:49 C55DF8 r S02 [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/06/13 23:23:52 C55DF8 r S02 [internal] WARNING: For Irdeto cards you will have to set 'cardmhz = 600' in oscam.server
2014/06/13 23:23:52 C55DF8 r S02 [internal] active providers: 2 (000000,000000)
2014/06/13 23:23:52 C55DF8 r S02 [internal] found card system irdeto
2014/06/13 23:23:52 C55DF8 r S02 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/06/13 23:23:52 C55DF8 r S02 [irdeto] entitlements for provider: 2, id: 000000
2014/06/13 23:23:52 C55DF8 r S02 [irdeto] chid: 05E8, date: 2012/09/08 - 2013/05/20
2014/06/13 23:23:52 C55DF8 r S02 [irdeto] chid: 7D27, date: 2012/09/08 - 2013/05/20
2014/06/13 23:23:52 C55DF8 r S02 [irdeto] chid: 05FB, date: 2012/09/08 - 2013/05/20
2014/06/13 23:23:52 C55DF8 r S02 [irdeto] chid: 0608, date: 2013/10/01 - 2014/06/12
2014/06/13 23:23:52 C55DF8 r S02 [irdeto] chid: 04CE, date: 2012/09/08 - 2013/05/20
2014/06/13 23:23:52 C55DF8 r S02 [irdeto] chid: 000F, date: 2012/09/08 - 2013/05/20
2014/06/13 23:23:52 C55DF8 r S02 [irdeto] chid: 00F0, date: 2012/09/08 - 2013/05/20
2014/06/13 23:23:52 C55DF8 r S02 [irdeto] chid: 05F1, date: 2012/09/08 - 2013/05/20
2014/06/13 23:23:52 C55DF8 r S02 [irdeto] chid: 0102, date: 2008/09/26 - 2008/10/12
2014/06/13 23:23:52 C55DF8 r S02 [irdeto] chid: 026C, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 028B, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 028C, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 028D, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 028E, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 028F, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 0290, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 029E, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 0291, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 0292, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 0293, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 0294, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 0295, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 028A, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 0298, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 0299, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 029A, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 029B, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 029C, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 05DD, date: 2012/09/08 - 2013/05/20
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 0103, date: 2008/09/26 - 2008/10/12
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 029C, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 0104, date: 2008/09/26 - 2008/10/12
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 0406, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 0105, date: 2008/09/26 - 2008/10/12
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 0004, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 0276, date: 2012/09/08 - 2013/05/20
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 05DE, date: 2012/09/08 - 2013/05/20
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 029D, date: 2008/01/19 - 2008/01/21
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 05DF, date: 2012/09/08 - 2013/05/20
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] chid: 05E7, date: 2012/09/08 - 2013/05/20
2014/06/13 23:23:53 C55DF8 r S02 [irdeto] ready for requests
2014/06/13 23:23:54 0 s init for all local cards done
2014/06/13 23:23:54 0 s anti cascading disabled
2014/06/13 23:23:54 C5AB98 c plain dvbapi-client granted (DVBApiUser, au=auto (2 reader))
2014/06/13 23:23:54 C5AB98 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/06/13 23:23:56 C5AB98 c Found 0 ECMpids and 10 STREAMpids in PMT
2014/06/13 23:23:56 C5AB98 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0004 index 0002 pmtpid 13EC
2014/06/13 23:23:56 C5AB98 c New program number: 283D (FFFE:283D unknown) [pmt_list_management 3]
2014/06/13 23:23:56 C5AB98 c [ADD PID 0] CAID: 1833 ECM_PID: 18B6 PROVID: 000000
2014/06/13 23:23:56 C5AB98 c [ADD PID 1] CAID: 09C4 ECM_PID: 1BB6 PROVID: 000000
2014/06/13 23:23:56 C5AB98 c [ADD PID 2] CAID: 09AF ECM_PID: 1FB6 PROVID: 000000
2014/06/13 23:23:56 C5AB98 c [ADD PID 3] CAID: 098C ECM_PID: 1AB6 PROVID: 000000
2014/06/13 23:23:56 C5AB98 c Found 4 ECMpids and 4 STREAMpids in PMT
2014/06/13 23:23:56 C5AB98 c [DVBAPI] Receiver wants to demux srvid 0083 on adapter 0000 camask 0008 index 0003 pmtpid 0064
2014/06/13 23:23:56 C5AB98 c New program number: 0083 (1833:0083 unknown) [pmt_list_management 3]
2014/06/13 23:23:56 C5AB98 c [DVBAPI] Demuxer #1 no suitable readers found that can be used for decoding!
2014/06/13 23:23:56 C5AB98 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 4 ecmpids!
2014/06/13 23:23:56 C5AB98 c [DVBAPI] Demuxer #1 no suitable readers found that can be used for decoding!
2014/06/13 23:23:56 C5AB98 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 4 ecmpids!
2014/06/13 23:23:57 C5AB98 c [DVBAPI] Demuxer #1 no suitable readers found that can be used for decoding!
2014/06/13 23:23:57 C5AB98 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 4 ecmpids!
2014/06/13 23:23:57 C5AB98 c [DVBAPI] Demuxer #1 no suitable readers found that can be used for decoding!
2014/06/13 23:23:57 C5AB98 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 4 ecmpids!
2014/06/13 23:23:58 C5AB98 c [DVBAPI] Demuxer #1 no suitable readers found that can be used for decoding!
2014/06/13 23:23:58 C5AB98 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 4 ecmpids!
2014/06/13 23:23:58 C5AB98 c [DVBAPI] Demuxer #1 no suitable readers found that can be used for decoding!

TThiesie · 13. Juni 2014

AW: Problem mit Oscam

Jetzt gehts, habe ein bißchen gewartet da gings.

Vielen Dank noch mal für Deine Mühe.

Morgen versuche ich dann mal meine cccam Clienten zum laufen zu bringen.

Gruß
Karsten

janni1 · 13. Juni 2014

AW: Problem mit Oscam

Hi,
nach der Änderung im User hast du Oscam auch neu gestartet?
Was sagt das Log bei einem SD-Sender von sky?

edit: ahhh ok... dann läuft ja erstmal alles!

Gruß
janni1

THør · 13. Juni 2014

AW: Problem mit Oscam

Schreib mal in oscam.server die caid 1833 beim reader für die S02 mit rein.

Gesendet von meinem GT-I9300 mit Tapatalk
Edit : ups, hast du ja schon.

janni1 · 13. Juni 2014

AW: Problem mit Oscam

Hi,
@THør
Eine S02 im irdeto-Mode kann mit der Caid 1833 nichts anfangen.
Deshalb ist diese Caid auch im Reader unnütz und sollte nicht unbedingt extra eingetragen werden.

Gruß
janni1

TThiesie · 14. Juni 2014

AW: Problem mit Oscam

Hallo, nachdem mir janni1 gestern riesig weitergeholfen hat habe uch mich heute an mein HS begeben.
Auf der Serverbox läuft alles aber an den Clienten nur HD+.

oscam.config

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 7000
preferlocalcards = 1
usrfile = /media/usb/oscam/user.log
logfile = /var/log/oscam.log
maxlogsize = 500
cwlogdir = /media/usb/oscam/
emmlogdir = /tmp/log
maxlogsize = 10240

[webif]
HttpPort = 9001
HttpUser = TThiesie
HttpPWD = 14sb28cs
HttpRefresh = 10
HttpAllowed = 192.168.2.1-192.168.2.254
HttpReadOnly = 1

[dvbapi]
Enabled = 1
Boxtype = dreambox
User = DVBApiUser
AU = 1

[cccam]
port = 12000
reshare = 1
forward_origin_card = 0
ignorereshare = 0
version = 2.1.4
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240

oscam.server

[reader]
label = hd01
protocol = internal
device = /dev/sci0
caid = 1830
rsakey = BFZENSIERTD5
boxkey = A7ZENSIERT7C
detect = cd
ecmwhitelist = 1830:92
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,3,2
auprovid = 003411

[reader]
Label = S02
mhz = 1
cardmhz = 2700
Protocol = internal
device = /dev/sci1
Detect = CD
CAID = 1702,1833
Group = 2
EMMCache = 1,1,2
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1

oscam.user

[account]
User = DVBApiUser
AU = 1
Group = 1,2
betatunnel = 1833.FFFF:1702

[account]
user = user2
pwd = pass2
group = 1
hostname = 192.168.2.18
cccmaxhops = 2
cccreshare = 1

[account]
user = user5
pwd = pass5
group = 1
hostname = 192.168.2.30
cccmaxhops = 2
cccreshare = 1

[account]
user = user6
pwd = pass6
group = 1
hostname = 192.168.2.25
cccmaxhops = 2
cccreshare = 1

[account]
user = user9
pwd = pass9
group = 1
hostname = 192.168.2.21
cccmaxhops = 2
cccreshare = 1

[account]
user = user4
pwd = pass4
group = 1
hostname = 192.168.2.15
cccmaxhops = 2
cccreshare = 1

[account]
user = user7
pwd = pass7
group = 1
hostname = 192.168.2.20
cccmaxhops = 2
cccreshare = 1

[account]
user = user8
pwd = pass8
group = 1
hostname = 192.168.2.40
cccmaxhops = 2
cccreshare = 1

al-x83

Alex · 14. Juni 2014

AW: Problem mit Oscam

Wenn du bei den Clients (also in der oscam.user) auch group = 1,2 machst, dann klappts dort auch

TThiesie · 14. Juni 2014

AW: Problem mit Oscam

Klappt jetzt wunderbar.
Gibt´s auch eine Möglichkeit ORF mit dem Softcam.key auf der Serverbox offen zu kriegen.
Habe erst versucht Oscam parallel zur Cccam laufen zu lassen aber das ging nicht.
Ich hatte mir gedacht, da ja die Cccam Clienten ORF haben ob die Cccam nicht gleichteitig als Server für die Oscam da sein könnte.

4gx35 · 14. Juni 2014

AW: Problem mit Oscam

du kannst garantiert auf der serverbox einfach Link ist nicht mehr aktiv.
dvbapi muss deaktiv auf serverbox sein; dann bist du von anderen unabhängig

TThiesie · 14. Juni 2014

AW: Problem mit Oscam

Also da blicke ich wirklich nicht mehr durch,
Habe jetzt mal das andere versucht also von meinem Cccam Clienten die Keys zu kriegen aber da mache ich wohl auch einen Fehler.

oscam.config

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 7000
preferlocalcards = 1
usrfile = /media/usb/oscam/user.log
logfile = /var/log/oscam.log
maxlogsize = 500
cwlogdir = /media/usb/oscam/
emmlogdir = /tmp/log
maxlogsize = 10240

[webif]
HttpPort = 9001
HttpUser = TThiesie
HttpPWD = 14sb28cs
HttpRefresh = 10
HttpAllowed = 192.168.2.1-192.168.2.254
HttpReadOnly = 1

[dvbapi]
Enabled = 1
Boxtype = dreambox
User = DVBApiUser
AU = 1

[cccam]
port = 12000
reshare = 1
forward_origin_card = 0
ignorereshare = 0
version = 2.1.4
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240

oscam.server

[reader]
label = hd01
protocol = internal
device = /dev/sci0
caid = 1830
rsakey = BF3xxxxxxxxxxx4DD5
boxkey = A76xxxxxxxxD37C
detect = cd
ecmwhitelist = 1830:92
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,3,2
auprovid = 003411

[reader]
Label = S02
mhz = 1
cardmhz = 2700
Protocol = internal
device = /dev/sci1
Detect = CD
CAID = 1702,1833
Group = 2
EMMCache = 1,1,2
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1

[reader]
label = keyserver
protocol = cccam
device = 192.168.2.18
user = oscamserver
password = oscampass
caid = 0D05
services = keyserver
group = 3

oscam.user

[account]
User = DVBApiUser
AU = 1
Group = 1,2
betatunnel = 1833.FFFF:1702

[account]
user = user2
pwd = pass2
group = 1,2,3
hostname = 192.168.2.18
cccmaxhops = 2
cccreshare = 1

[account]
user = user5
pwd = pass5
group = 1,2,3
hostname = 192.168.2.30
cccmaxhops = 2
cccreshare = 1

[account]
user = user6
pwd = pass6
group = 1,2,3
hostname = 192.168.2.25
cccmaxhops = 2
cccreshare = 1

[account]
user = user9
pwd = pass9
group = 1,2,3
hostname = 192.168.2.21
cccmaxhops = 2
cccreshare = 1

[account]
user = user4
pwd = pass4
group = 1,2,3
hostname = 192.168.2.15
cccmaxhops = 2
cccreshare = 1

[account]
user = user7
pwd = pass7
group = 1,2,3
hostname = 192.168.2.20
cccmaxhops = 2
cccreshare = 1

[account]
user = user8
pwd = pass8
group = 1,2,3
hostname = 192.168.2.40
cccmaxhops = 2
cccreshare = 1

cccam.cfg

F: oscamserver oscampass

C: 192.168.2.13 12000 user2 pass2

4gx35 · 14. Juni 2014

AW: Problem mit Oscam

beim reader keyserver mal want_emu aktivieren
an f-line 2 1 1 anhängen

TThiesie · 14. Juni 2014

AW: Problem mit Oscam

Ich hoffe ich habe das richtig gemacht

cccam.cfg

F: oscamserver oscampass

C: 192.168.2.13 12000 user2 pass2 2 1 1

oscam.server

[reader]
label = hd01
protocol = internal
device = /dev/sci0
caid = 1830
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
ecmwhitelist = 1830:92
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,3,2
auprovid = 003411

[reader]
Label = S02
mhz = 1
cardmhz = 2700
Protocol = internal
device = /dev/sci1
Detect = CD
CAID = 1702,1833
Group = 2
EMMCache = 1,1,2
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1

[reader]
label = want_emu
protocol = cccam
device = 192.168.2.18
user = oscamserver
password = oscampass
caid = 0D05
services = keyserver
group = 3

Funzt leider nicht

janni1 · 14. Juni 2014

AW: Problem mit Oscam

Hi,
Am einfachsten gehts vielleicht so.

Und so wirds gemacht

Gruss
Janni1

Suche

Suche

Problem mit Oscam

TThiesie

Freak

janni1

TThiesie

Freak

TThiesie

Freak

janni1

THør

Guest

janni1

TThiesie

Freak

Alex

TThiesie

Freak

4gx35

TThiesie

Freak

4gx35

TThiesie

Freak

janni1

Ähnliche Themen

Spenden Unterstützung