Aktuelles
Von:
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Problem mit Oscam

AW: Problem mit Oscam

Hi,
du solltest die Range anpassen "HttpAllowed = 192.168.2.1-192.168.2.254" !

Du hast in deiner Config angegeben, dass du im Ordner tmp eine Datei namens "log" als Logfile nutzen willst.

Gruß
janni1
 
AW: Problem mit Oscam

Das war der Fehler ich habe zwar noch kein Bild aber ich komme ins Webif.

Im Log steht folgendes



  • 2014/06/13 21:27:54 777024E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
  • 2014/06/13 21:27:54 777024E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
  • 2014/06/13 21:27:55 777024E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
  • 2014/06/13 21:27:55 777024E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
  • 2014/06/13 21:27:55 777024E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
  • 2014/06/13 21:27:56 777024E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
  • 2014/06/13 21:27:56 777024E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
  • 2014/06/13 21:27:56 777024E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
  • 2014/06/13 21:27:57 777024E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
  • 2014/06/13 21:27:57 777024E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
  • 2014/06/13 21:27:57 777024E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
  • 2014/06/13 21:27:57 777024E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
Zum Vergrößern anklicken....
 
AW: Problem mit Oscam

Hi,
dann poste bitte noch einmal deine aktuelle oscam.server und oscam.user.
Ein Log vom Oscam-Start bis zur ersten Senderanfrage wäre nun auch recht hilfreich.

Gruß
janni1
 
AW: Problem mit Oscam

oscam.server
[reader]
label = hd01
protocol = internal
device = /dev/sci0
caid = 1830
rsakey = BF...D5
boxkey = A7...7C
detect = cd
ecmwhitelist = 1830:92
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,3,2
auprovid = 003411



[reader]
Label = S02
Protocol = internal
device = /dev/sci1
Detect = CD
CAID = 1702,1833
Group = 2
EMMCache = 1,1,2
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
Zum Vergrößern anklicken....


oscam.user
[account]
User = DVBApiUser
AU = 1
Group = 1,2
Zum Vergrößern anklicken....



Ein Log vom Oscam-Start bis zur ersten Senderanfrage wäre nun auch recht hilfreich.
Zum Vergrößern anklicken....

Wie mache ich das?
 
AW: Problem mit Oscam

Hi,
zum Log erstellen, starte oscam neu.
Dann verbinde dich zum WebIf und gehe unter Files auf logfile.
Von hier kannst du die einsprechenden Einträge kopieren und am besten dann hier im Spoiler posten.
der Anfang sollte z.b. so losgehen
Code: 
-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Fri Jun 13 21:55:27 2014
-------------------------------------------------------------------------------
2014/06/13 21:55:27        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r9xxx (mipsel-unknown-linux-gnu)
so verwendet man Spoiler
Wie verwende ich Spoiler

Antworten, erweitert. Oben rechts im Menü findet ihr Spoiler. Damit werden die Beiträge nicht so riesen lang.
Spoiler anlicken,2x Enter drücken , Die kopierten Sachen dort einfügen

Du musst angemeldet sein, um Bilder zu sehen.
Gruß
janni1
 
Zuletzt bearbeitet:
AW: Problem mit Oscam

saveemm-u = 1 fehlt bei dir
 
AW: Problem mit Oscam

Unter "var" habe ich keinen Ordner "log".
Dann wollte ich Ihn erstellen aber Totalcommander sagt geht nicht.

- - - - - - - - - -

Jetzt habe ich das Logfile
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Jun 13 22:11:52 2014
-------------------------------------------------------------------------------
2014/06/13 22:11:52 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9761 (mipsel-oe-linux)
2014/06/13 22:11:52 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 26284
2014/06/13 22:11:52 0 s couldn't open statistics file: /media/usb/oscam/user.log
2014/06/13 22:11:52 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/06/13 22:11:52 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/13 22:11:52 0 s signal handling initialized
2014/06/13 22:11:52 0 s hd01 [internal] creating thread for device /dev/sci0
2014/06/13 22:11:52 0 s S02 [internal] creating thread for device /dev/sci1
2014/06/13 22:11:52 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/06/13 22:11:52 0 s waiting for local card init
2014/06/13 22:11:52 77500588 r hd01 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/06/13 22:11:52 775024D0 r S02 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
2014/06/13 22:11:52 77BDA8 h webif: decompressed 151915 bytes back into 363072 bytes
2014/06/13 22:11:52 77BDA8 h HTTP Server running. ip=0.0.0.0 port=9001
2014/06/13 22:11:53 77500588 r hd01 [internal] card detected
2014/06/13 22:11:53 775024D0 r S02 [internal] card detected
2014/06/13 22:11:55 77500588 r hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/06/13 22:11:55 77500588 r hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/13 22:11:55 77500588 r hd01 [internal] TEST tempo mhz check = 500 mhz
2014/06/13 22:11:55 77500588 r hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/06/13 22:11:55 77500588 r hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/13 22:11:55 77500588 r hd01 [internal] Card responded ok for ifsd request of 251
2014/06/13 22:11:56 77500588 r hd01 [internal] detect native nagra card
2014/06/13 22:11:56 775024D0 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/06/13 22:11:56 775024D0 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/06/13 22:11:56 775024D0 r S02 [internal] Calculated work ETU is 93.00 us reader mhz = 600
2014/06/13 22:11:56 775024D0 r S02 [internal] ATR Fsmax is 6 MHz, clocking card to 6.00 (specified in reader->mhz)
2014/06/13 22:11:57 77500588 r hd01 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2014/06/13 22:11:57 77500588 r hd01 [internal] card system not supported
2014/06/13 22:11:57 77500588 r hd01 [internal] Normal mode failed, reverting to Deprecated Mode
2014/06/13 22:11:57 775024D0 r S02 [internal] detect irdeto tunneled nagra card
2014/06/13 22:11:57 775024D0 r S02 [internal] no rsa key configured -> using irdeto mode
2014/06/13 22:11:57 775024D0 r S02 [internal] detect irdeto card
2014/06/13 22:11:58 77500588 r hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/06/13 22:11:58 77500588 r hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/13 22:11:58 77500588 r hd01 [internal] TEST tempo mhz check = 500 mhz
2014/06/13 22:11:58 77500588 r hd01 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/06/13 22:11:58 77500588 r hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/13 22:11:59 77500588 r hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2014/06/13 22:12:00 77500588 r hd01 [internal] detect native nagra card
2014/06/13 22:12:02 77500588 r hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/06/13 22:12:03 77500588 r hd01 [internal] T1 Resync command error, trying to reactivate!
2014/06/13 22:12:04 775024D0 r S02 [internal] card system not supported
2014/06/13 22:12:04 775024D0 r S02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/06/13 22:12:05 77500588 r hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/06/13 22:12:05 77500588 r hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/13 22:12:05 77500588 r hd01 [internal] TEST tempo mhz check = 500 mhz
2014/06/13 22:12:05 77500588 r hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/06/13 22:12:05 77500588 r hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/13 22:12:05 77500588 r hd01 [internal] Card responded ok for ifsd request of 251
2014/06/13 22:12:05 77500588 r hd01 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2014/06/13 22:12:05 77500588 r hd01 [internal] card system not supported
2014/06/13 22:12:05 77500588 r hd01 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/06/13 22:12:05 77500588 r hd01 [internal] card initializing error
2014/06/13 22:12:07 775024D0 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/06/13 22:12:07 775024D0 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/06/13 22:12:07 775024D0 r S02 [internal] Calculated work ETU is 62.00 us reader mhz = 600
2014/06/13 22:12:07 775024D0 r S02 [internal] ATR Fsmax is 5 MHz, clocking card to 6.00 (specified in reader->mhz)
2014/06/13 22:12:08 775024D0 r S02 [internal] detect irdeto tunneled nagra card
2014/06/13 22:12:08 775024D0 r S02 [internal] no rsa key configured -> using irdeto mode
2014/06/13 22:12:08 775024D0 r S02 [internal] detect irdeto card
2014/06/13 22:12:13 775024D0 r S02 [internal] card system not supported
2014/06/13 22:12:13 775024D0 r S02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/06/13 22:12:13 775024D0 r S02 [internal] card initializing error
2014/06/13 22:12:13 0 s init for all local cards done
2014/06/13 22:12:13 0 s anti cascading disabled
2014/06/13 22:12:13 77504480 c plain dvbapi-client granted (DVBApiUser, au=auto (2 reader))
2014/06/13 22:12:13 77504480 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/06/13 22:12:13 77504480 c [ADD PID 0] CAID: 1843 ECM_PID: 19CC PROVID: 000000
2014/06/13 22:12:13 77504480 c [ADD PID 1] CAID: 098C ECM_PID: 1ACC PROVID: 000000
2014/06/13 22:12:13 77504480 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2014/06/13 22:12:13 77504480 c [ADD PID 3] CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2014/06/13 22:12:13 77504480 c [ADD PID 4] CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2014/06/13 22:12:13 77504480 c Found 5 ECMpids and 7 STREAMpids in PMT
2014/06/13 22:12:13 77504480 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0008 index 0003 pmtpid 0060
2014/06/13 22:12:13 77504480 c New program number: EF10 (1843:EF10 unknown) [pmt_list_management 3]
2014/06/13 22:12:13 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:13 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:14 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:14 77504480 c Found 0 ECMpids and 10 STREAMpids in PMT
2014/06/13 22:12:14 77504480 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0004 index 0002 pmtpid 13EC
2014/06/13 22:12:14 77504480 c New program number: 283D (FFFE:283D unknown) [pmt_list_management 3]
2014/06/13 22:12:14 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:14 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:14 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:15 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:15 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:15 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:15 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:16 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:16 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:16 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:17 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:17 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:17 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:18 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
Zum Vergrößern anklicken....
 
AW: Problem mit Oscam

Hi,
bei der HD01 solltest du mal rsa key und boxkey überprüfen!
2014/06/13 22:11:57 77500588 r hd01 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
Zum Vergrößern anklicken....
Bei der S02 mach mal folgendes im Reader:
mhz = 1
cardmhz = 2700
Zum Vergrößern anklicken....
Oscam neu starten und wieder ein Log posten, aber wenn es geht diesmal im Spoiler bitte!

Gruß
janni1
 
AW: Problem mit Oscam

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Jun 13 22:11:52 2014
-------------------------------------------------------------------------------
2014/06/13 22:11:52 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9761 (mipsel-oe-linux)
2014/06/13 22:11:52 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 26284
2014/06/13 22:11:52 0 s couldn't open statistics file: /media/usb/oscam/user.log
2014/06/13 22:11:52 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/06/13 22:11:52 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/13 22:11:52 0 s signal handling initialized
2014/06/13 22:11:52 0 s hd01 [internal] creating thread for device /dev/sci0
2014/06/13 22:11:52 0 s S02 [internal] creating thread for device /dev/sci1
2014/06/13 22:11:52 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/06/13 22:11:52 0 s waiting for local card init
2014/06/13 22:11:52 77500588 r hd01 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/06/13 22:11:52 775024D0 r S02 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
2014/06/13 22:11:52 77BDA8 h webif: decompressed 151915 bytes back into 363072 bytes
2014/06/13 22:11:52 77BDA8 h HTTP Server running. ip=0.0.0.0 port=9001
2014/06/13 22:11:53 77500588 r hd01 [internal] card detected
2014/06/13 22:11:53 775024D0 r S02 [internal] card detected
2014/06/13 22:11:55 77500588 r hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/06/13 22:11:55 77500588 r hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/13 22:11:55 77500588 r hd01 [internal] TEST tempo mhz check = 500 mhz
2014/06/13 22:11:55 77500588 r hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/06/13 22:11:55 77500588 r hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/13 22:11:55 77500588 r hd01 [internal] Card responded ok for ifsd request of 251
2014/06/13 22:11:56 77500588 r hd01 [internal] detect native nagra card
2014/06/13 22:11:56 775024D0 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/06/13 22:11:56 775024D0 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/06/13 22:11:56 775024D0 r S02 [internal] Calculated work ETU is 93.00 us reader mhz = 600
2014/06/13 22:11:56 775024D0 r S02 [internal] ATR Fsmax is 6 MHz, clocking card to 6.00 (specified in reader->mhz)
2014/06/13 22:11:57 77500588 r hd01 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2014/06/13 22:11:57 77500588 r hd01 [internal] card system not supported
2014/06/13 22:11:57 77500588 r hd01 [internal] Normal mode failed, reverting to Deprecated Mode
2014/06/13 22:11:57 775024D0 r S02 [internal] detect irdeto tunneled nagra card
2014/06/13 22:11:57 775024D0 r S02 [internal] no rsa key configured -> using irdeto mode
2014/06/13 22:11:57 775024D0 r S02 [internal] detect irdeto card
2014/06/13 22:11:58 77500588 r hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/06/13 22:11:58 77500588 r hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/13 22:11:58 77500588 r hd01 [internal] TEST tempo mhz check = 500 mhz
2014/06/13 22:11:58 77500588 r hd01 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/06/13 22:11:58 77500588 r hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/13 22:11:59 77500588 r hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2014/06/13 22:12:00 77500588 r hd01 [internal] detect native nagra card
2014/06/13 22:12:02 77500588 r hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/06/13 22:12:03 77500588 r hd01 [internal] T1 Resync command error, trying to reactivate!
2014/06/13 22:12:04 775024D0 r S02 [internal] card system not supported
2014/06/13 22:12:04 775024D0 r S02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/06/13 22:12:05 77500588 r hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/06/13 22:12:05 77500588 r hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/13 22:12:05 77500588 r hd01 [internal] TEST tempo mhz check = 500 mhz
2014/06/13 22:12:05 77500588 r hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/06/13 22:12:05 77500588 r hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/13 22:12:05 77500588 r hd01 [internal] Card responded ok for ifsd request of 251
2014/06/13 22:12:05 77500588 r hd01 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2014/06/13 22:12:05 77500588 r hd01 [internal] card system not supported
2014/06/13 22:12:05 77500588 r hd01 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/06/13 22:12:05 77500588 r hd01 [internal] card initializing error
2014/06/13 22:12:07 775024D0 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/06/13 22:12:07 775024D0 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/06/13 22:12:07 775024D0 r S02 [internal] Calculated work ETU is 62.00 us reader mhz = 600
2014/06/13 22:12:07 775024D0 r S02 [internal] ATR Fsmax is 5 MHz, clocking card to 6.00 (specified in reader->mhz)
2014/06/13 22:12:08 775024D0 r S02 [internal] detect irdeto tunneled nagra card
2014/06/13 22:12:08 775024D0 r S02 [internal] no rsa key configured -> using irdeto mode
2014/06/13 22:12:08 775024D0 r S02 [internal] detect irdeto card
2014/06/13 22:12:13 775024D0 r S02 [internal] card system not supported
2014/06/13 22:12:13 775024D0 r S02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/06/13 22:12:13 775024D0 r S02 [internal] card initializing error
2014/06/13 22:12:13 0 s init for all local cards done
2014/06/13 22:12:13 0 s anti cascading disabled
2014/06/13 22:12:13 77504480 c plain dvbapi-client granted (DVBApiUser, au=auto (2 reader))
2014/06/13 22:12:13 77504480 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/06/13 22:12:13 77504480 c [ADD PID 0] CAID: 1843 ECM_PID: 19CC PROVID: 000000
2014/06/13 22:12:13 77504480 c [ADD PID 1] CAID: 098C ECM_PID: 1ACC PROVID: 000000
2014/06/13 22:12:13 77504480 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2014/06/13 22:12:13 77504480 c [ADD PID 3] CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2014/06/13 22:12:13 77504480 c [ADD PID 4] CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2014/06/13 22:12:13 77504480 c Found 5 ECMpids and 7 STREAMpids in PMT
2014/06/13 22:12:13 77504480 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0008 index 0003 pmtpid 0060
2014/06/13 22:12:13 77504480 c New program number: EF10 (1843:EF10 unknown) [pmt_list_management 3]
2014/06/13 22:12:13 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:13 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:14 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:14 77504480 c Found 0 ECMpids and 10 STREAMpids in PMT
2014/06/13 22:12:14 77504480 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0004 index 0002 pmtpid 13EC
2014/06/13 22:12:14 77504480 c New program number: 283D (FFFE:283D unknown) [pmt_list_management 3]
2014/06/13 22:12:14 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:14 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:14 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:15 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:15 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:15 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:15 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:16 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

Aber wie mache ich das mit dem RSA- und dem Boxkey?
 
Zuletzt bearbeitet:
AW: Problem mit Oscam

Jippih, also HD+ funzt nur Sky noch nicht, hier das Log
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Jun 13 22:11:52 2014
-------------------------------------------------------------------------------
2014/06/13 22:11:52 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9761 (mipsel-oe-linux)
2014/06/13 22:11:52 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 26284
2014/06/13 22:11:52 0 s couldn't open statistics file: /media/usb/oscam/user.log
2014/06/13 22:11:52 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/06/13 22:11:52 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/13 22:11:52 0 s signal handling initialized
2014/06/13 22:11:52 0 s hd01 [internal] creating thread for device /dev/sci0
2014/06/13 22:11:52 0 s S02 [internal] creating thread for device /dev/sci1
2014/06/13 22:11:52 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/06/13 22:11:52 0 s waiting for local card init
2014/06/13 22:11:52 77500588 r hd01 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/06/13 22:11:52 775024D0 r S02 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
2014/06/13 22:11:52 77BDA8 h webif: decompressed 151915 bytes back into 363072 bytes
2014/06/13 22:11:52 77BDA8 h HTTP Server running. ip=0.0.0.0 port=9001
2014/06/13 22:11:53 77500588 r hd01 [internal] card detected
2014/06/13 22:11:53 775024D0 r S02 [internal] card detected
2014/06/13 22:11:55 77500588 r hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/06/13 22:11:55 77500588 r hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/13 22:11:55 77500588 r hd01 [internal] TEST tempo mhz check = 500 mhz
2014/06/13 22:11:55 77500588 r hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/06/13 22:11:55 77500588 r hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/13 22:11:55 77500588 r hd01 [internal] Card responded ok for ifsd request of 251
2014/06/13 22:11:56 77500588 r hd01 [internal] detect native nagra card
2014/06/13 22:11:56 775024D0 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/06/13 22:11:56 775024D0 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/06/13 22:11:56 775024D0 r S02 [internal] Calculated work ETU is 93.00 us reader mhz = 600
2014/06/13 22:11:56 775024D0 r S02 [internal] ATR Fsmax is 6 MHz, clocking card to 6.00 (specified in reader->mhz)
2014/06/13 22:11:57 77500588 r hd01 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2014/06/13 22:11:57 77500588 r hd01 [internal] card system not supported
2014/06/13 22:11:57 77500588 r hd01 [internal] Normal mode failed, reverting to Deprecated Mode
2014/06/13 22:11:57 775024D0 r S02 [internal] detect irdeto tunneled nagra card
2014/06/13 22:11:57 775024D0 r S02 [internal] no rsa key configured -> using irdeto mode
2014/06/13 22:11:57 775024D0 r S02 [internal] detect irdeto card
2014/06/13 22:11:58 77500588 r hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/06/13 22:11:58 77500588 r hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/13 22:11:58 77500588 r hd01 [internal] TEST tempo mhz check = 500 mhz
2014/06/13 22:11:58 77500588 r hd01 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/06/13 22:11:58 77500588 r hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/13 22:11:59 77500588 r hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2014/06/13 22:12:00 77500588 r hd01 [internal] detect native nagra card
2014/06/13 22:12:02 77500588 r hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/06/13 22:12:03 77500588 r hd01 [internal] T1 Resync command error, trying to reactivate!
2014/06/13 22:12:04 775024D0 r S02 [internal] card system not supported
2014/06/13 22:12:04 775024D0 r S02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/06/13 22:12:05 77500588 r hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/06/13 22:12:05 77500588 r hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/13 22:12:05 77500588 r hd01 [internal] TEST tempo mhz check = 500 mhz
2014/06/13 22:12:05 77500588 r hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/06/13 22:12:05 77500588 r hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/13 22:12:05 77500588 r hd01 [internal] Card responded ok for ifsd request of 251
2014/06/13 22:12:05 77500588 r hd01 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2014/06/13 22:12:05 77500588 r hd01 [internal] card system not supported
2014/06/13 22:12:05 77500588 r hd01 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/06/13 22:12:05 77500588 r hd01 [internal] card initializing error
2014/06/13 22:12:07 775024D0 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/06/13 22:12:07 775024D0 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/06/13 22:12:07 775024D0 r S02 [internal] Calculated work ETU is 62.00 us reader mhz = 600
2014/06/13 22:12:07 775024D0 r S02 [internal] ATR Fsmax is 5 MHz, clocking card to 6.00 (specified in reader->mhz)
2014/06/13 22:12:08 775024D0 r S02 [internal] detect irdeto tunneled nagra card
2014/06/13 22:12:08 775024D0 r S02 [internal] no rsa key configured -> using irdeto mode
2014/06/13 22:12:08 775024D0 r S02 [internal] detect irdeto card
2014/06/13 22:12:13 775024D0 r S02 [internal] card system not supported
2014/06/13 22:12:13 775024D0 r S02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/06/13 22:12:13 775024D0 r S02 [internal] card initializing error
2014/06/13 22:12:13 0 s init for all local cards done
2014/06/13 22:12:13 0 s anti cascading disabled
2014/06/13 22:12:13 77504480 c plain dvbapi-client granted (DVBApiUser, au=auto (2 reader))
2014/06/13 22:12:13 77504480 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/06/13 22:12:13 77504480 c [ADD PID 0] CAID: 1843 ECM_PID: 19CC PROVID: 000000
2014/06/13 22:12:13 77504480 c [ADD PID 1] CAID: 098C ECM_PID: 1ACC PROVID: 000000
2014/06/13 22:12:13 77504480 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2014/06/13 22:12:13 77504480 c [ADD PID 3] CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2014/06/13 22:12:13 77504480 c [ADD PID 4] CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2014/06/13 22:12:13 77504480 c Found 5 ECMpids and 7 STREAMpids in PMT
2014/06/13 22:12:13 77504480 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0008 index 0003 pmtpid 0060
2014/06/13 22:12:13 77504480 c New program number: EF10 (1843:EF10 unknown) [pmt_list_management 3]
2014/06/13 22:12:13 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:13 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:14 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:14 77504480 c Found 0 ECMpids and 10 STREAMpids in PMT
2014/06/13 22:12:14 77504480 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0004 index 0002 pmtpid 13EC
2014/06/13 22:12:14 77504480 c New program number: 283D (FFFE:283D unknown) [pmt_list_management 3]
2014/06/13 22:12:14 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:14 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:14 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:15 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/06/13 22:12:15 77504480 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/13 22:12:15 77504480 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

Gruß
Karsten
 
AW: Problem mit Oscam

Hi
zwecks rsa und boxkey hab ich oben editiert.
Du solltest allerdings immer das aktuelle Log posten und nicht immer das selbe :emoticon-0136-giggl
Die letzten zwei waren von Uhrzeit und Einträgen her gleich.

Gruß
janni1
 

Ähnliche Themen

M
Dreambox Two als Oscam Server, HD01 Karte, Aussetzer/Hänger bei Clients
2
Antworten
26
Aufrufe
4K
m0bbed
M
S
gelöst Dreambox 7080 - Newnigma2 - OSCam: 1.20_svn Build: r11726-799 by 0nkel4tze - ICAM - Fehler
Antworten
10
Aufrufe
2K
ghost0815
ghost0815
D
gelöst OSCAM AU Einstellungen
2
Antworten
15
Aufrufe
10K
Vigor
Vigor
n4pl
Oscam + TVHeadend + Unraid + Docker = Random "Unknown socket command received"
Antworten
10
Aufrufe
4K
n4pl
n4pl
V
Oscam-Server auf Raspberry schreibt keine EMM`s
Antworten
12
Aufrufe
3K
darek6er
darek6er
Zurück
Oben