So habe jetzt die
Firmware: 84.05.50 rev24230 mit Freetz: devel-9731M
Habe über TB Flex die Oscam eingespielt.
Habe dann an den hinteren USB Port meiner 7390 einen Vivanco Hub angeschlossen.
An diesen PASSIVEN Hub habe ich dann einmal einen Smartmouse mit einer V13 und einmal einen Smartmouse mit einer HD01.
Hier dann meine Config
Config
Server
Bekomme aber BEIDE Karten nicht zum Laufen.
Das ist der Log der V13. Also wenn nur der Reader der V13 ENABLED ist.
Und das ist der LOG wenn nur die HD01 ENABLED ist.
Es wäre super, wenn sich einer mal die Sache anschauen könnte.
Denkt ihr, dass es an der Firmware liegen könnte? Oder ist doch ein Fehler in der Config?
Firmware: 84.05.50 rev24230 mit Freetz: devel-9731M
Habe über TB Flex die Oscam eingespielt.
Habe dann an den hinteren USB Port meiner 7390 einen Vivanco Hub angeschlossen.
An diesen PASSIVEN Hub habe ich dann einmal einen Smartmouse mit einer V13 und einmal einen Smartmouse mit einer HD01.
Hier dann meine Config
Config
[global]
logfile = /var/InternerSpeicher/logs/oscam.log
MaxLogsize = 300
WaitForCards = 1
fallbacktimeout = 2600
saveinithistory = 1
lb_mode = 1
lb_save = 100
lb_savepath = /var/InternerSpeicher/logs/stat
[monitor]
port = 988
serverip = 192.168.178.1
nocrypt = 192.168.178.1-192.168.178.255
hideclient_to = 15
monlevel = 4
appendchaninfo = 0
[cccam]
port = 35000
reshare = 1
version = 2.1.1
stealth = 1
[webif]
httpport = 83
httphelplang = de
httpuser = xxx
httppwd = xxx
httprefresh = 15
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = xxx
logfile = /var/InternerSpeicher/logs/oscam.log
MaxLogsize = 300
WaitForCards = 1
fallbacktimeout = 2600
saveinithistory = 1
lb_mode = 1
lb_save = 100
lb_savepath = /var/InternerSpeicher/logs/stat
[monitor]
port = 988
serverip = 192.168.178.1
nocrypt = 192.168.178.1-192.168.178.255
hideclient_to = 15
monlevel = 4
appendchaninfo = 0
[cccam]
port = 35000
reshare = 1
version = 2.1.1
stealth = 1
[webif]
httpport = 83
httphelplang = de
httpuser = xxx
httppwd = xxx
httprefresh = 15
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = xxx
Server
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_by_EasyBuild_svn SVN r7940
# Read more:
[reader]
label = hd01
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 1830
rsakey = BF...
boxkey = A7...
ecmwhitelist = 1830:92
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
lb_weight = 300
[reader]
label = sky
enable = 1
protocol = mouse
device = /dev/ttyUSB1
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,1,2
ndsversion = 2
# Read more:
Sie müssen registriert sein, um Links zu sehen.
[reader]
label = hd01
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 1830
rsakey = BF...
boxkey = A7...
ecmwhitelist = 1830:92
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
lb_weight = 300
[reader]
label = sky
enable = 1
protocol = mouse
device = /dev/ttyUSB1
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,1,2
ndsversion = 2
Bekomme aber BEIDE Karten nicht zum Laufen.
Das ist der Log der V13. Also wenn nur der Reader der V13 ENABLED ist.
2012/12/27 21:55:58 5CFD68 r sky [mouse] Card responded ok for ifsd request of 251
2012/12/27 21:55:59 5CFD68 r sky [mouse] detect native nagra card
2012/12/27 21:55:59 5CFD68 r sky [mouse] type: NAGRA, caid: 1830, IRD ID: ############
2012/12/27 21:55:59 5CFD68 r sky [mouse] ProviderID:
2012/12/27 21:55:59 5CFD68 r sky [mouse] active to: 2013/02/16 11:59
2012/12/27 21:55:59 5CFD68 r sky [mouse] -----------------------------------------
2012/12/27 21:55:59 5CFD68 r sky [mouse] |id |tier |valid from |valid to |
2012/12/27 21:55:59 5CFD68 r sky [mouse] +----+--------+------------+------------+
2012/12/27 21:55:59 5CFD68 r sky [mouse] |8011|0064 |2010/04/10 |2011/04/11 |
2012/12/27 21:55:59 5CFD68 r sky [mouse] |8011|0BEA |2011/04/10 |2013/06/02 |
2012/12/27 21:56:00 5CFD68 r sky [mouse] |8011|0065 |1992/01/01 |1993/01/01 |
2012/12/27 21:56:00 5CFD68 r sky [mouse] -----------------------------------------
2012/12/27 21:56:00 5CFD68 r sky [mouse] Negotiate sessionkey was not successfull! Please check rsa key and boxkey
2012/12/27 21:56:00 5CFD68 r sky [mouse] card system not supported
2012/12/27 21:56:00 5CFD68 r sky [mouse] Normal mode failed, reverting to Deprecated Mode
2012/12/27 21:56:02 5CFD68 r sky [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/12/27 21:56:02 5CFD68 r sky [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2012/12/27 21:56:02 5CFD68 r sky [mouse] Calculated work ETU is 104.20 us
2012/12/27 21:56:02 5CFD68 r sky [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2012/12/27 21:56:03 5CFD68 r sky [mouse] Warning: Card returned error on setting ifsd value to 251
2012/12/27 21:56:04 5CFD68 r sky [mouse] detect native nagra card
2012/12/27 21:56:06 5CFD68 r sky [mouse] Resync error: readtimeouts 712963/10 (max/min) us, writetimeouts 71/42 (max/min) us
2012/12/27 21:56:07 5CFD68 r sky [mouse] T1 Resync command error, trying to reactivate!
2012/12/27 21:56:09 5CFD68 r sky [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/12/27 21:56:09 5CFD68 r sky [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2012/12/27 21:56:09 5CFD68 r sky [mouse] Setting baudrate to 111600 bps
2012/12/27 21:56:09 5CFD68 r sky [mouse] Calculated work ETU is 8.96 us
2012/12/27 21:56:09 5CFD68 r sky [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2012/12/27 21:56:09 5CFD68 r sky [mouse] Card responded ok for ifsd request of 251
2012/12/27 21:56:09 5CFD68 r sky [mouse] type: NAGRA, caid: 1830, IRD ID: ############
2012/12/27 21:56:09 5CFD68 r sky [mouse] ProviderID:
2012/12/27 21:56:09 5CFD68 r sky [mouse] active to: 2013/02/16 11:59
2012/12/27 21:56:10 5CFD68 r sky [mouse] -----------------------------------------
2012/12/27 21:56:10 5CFD68 r sky [mouse] |id |tier |valid from |valid to |
2012/12/27 21:56:10 5CFD68 r sky [mouse] +----+--------+------------+------------+
2012/12/27 21:56:10 5CFD68 r sky [mouse] |8011|0064 |2010/04/10 |2011/04/11 |
2012/12/27 21:56:10 5CFD68 r sky [mouse] |8011|0BEA |2011/04/10 |2013/06/02 |
2012/12/27 21:56:10 5CFD68 r sky [mouse] |8011|0065 |1992/01/01 |1993/01/01 |
2012/12/27 21:56:10 5CFD68 r sky [mouse] -----------------------------------------
2012/12/27 21:56:10 5CFD68 r sky [mouse] Negotiate sessionkey was not successfull! Please check rsa key and boxkey
2012/12/27 21:56:10 5CFD68 r sky [mouse] card system not supported
2012/12/27 21:56:10 5CFD68 r sky [mouse] card initializing error
2012/12/27 21:55:59 5CFD68 r sky [mouse] detect native nagra card
2012/12/27 21:55:59 5CFD68 r sky [mouse] type: NAGRA, caid: 1830, IRD ID: ############
2012/12/27 21:55:59 5CFD68 r sky [mouse] ProviderID:
Sie müssen registriert sein, um Links zu sehen.
2012/12/27 21:55:59 5CFD68 r sky [mouse] active to: 2013/02/16 11:59
2012/12/27 21:55:59 5CFD68 r sky [mouse] -----------------------------------------
2012/12/27 21:55:59 5CFD68 r sky [mouse] |id |tier |valid from |valid to |
2012/12/27 21:55:59 5CFD68 r sky [mouse] +----+--------+------------+------------+
2012/12/27 21:55:59 5CFD68 r sky [mouse] |8011|0064 |2010/04/10 |2011/04/11 |
2012/12/27 21:55:59 5CFD68 r sky [mouse] |8011|0BEA |2011/04/10 |2013/06/02 |
2012/12/27 21:56:00 5CFD68 r sky [mouse] |8011|0065 |1992/01/01 |1993/01/01 |
2012/12/27 21:56:00 5CFD68 r sky [mouse] -----------------------------------------
2012/12/27 21:56:00 5CFD68 r sky [mouse] Negotiate sessionkey was not successfull! Please check rsa key and boxkey
2012/12/27 21:56:00 5CFD68 r sky [mouse] card system not supported
2012/12/27 21:56:00 5CFD68 r sky [mouse] Normal mode failed, reverting to Deprecated Mode
2012/12/27 21:56:02 5CFD68 r sky [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/12/27 21:56:02 5CFD68 r sky [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2012/12/27 21:56:02 5CFD68 r sky [mouse] Calculated work ETU is 104.20 us
2012/12/27 21:56:02 5CFD68 r sky [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2012/12/27 21:56:03 5CFD68 r sky [mouse] Warning: Card returned error on setting ifsd value to 251
2012/12/27 21:56:04 5CFD68 r sky [mouse] detect native nagra card
2012/12/27 21:56:06 5CFD68 r sky [mouse] Resync error: readtimeouts 712963/10 (max/min) us, writetimeouts 71/42 (max/min) us
2012/12/27 21:56:07 5CFD68 r sky [mouse] T1 Resync command error, trying to reactivate!
2012/12/27 21:56:09 5CFD68 r sky [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/12/27 21:56:09 5CFD68 r sky [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2012/12/27 21:56:09 5CFD68 r sky [mouse] Setting baudrate to 111600 bps
2012/12/27 21:56:09 5CFD68 r sky [mouse] Calculated work ETU is 8.96 us
2012/12/27 21:56:09 5CFD68 r sky [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2012/12/27 21:56:09 5CFD68 r sky [mouse] Card responded ok for ifsd request of 251
2012/12/27 21:56:09 5CFD68 r sky [mouse] type: NAGRA, caid: 1830, IRD ID: ############
2012/12/27 21:56:09 5CFD68 r sky [mouse] ProviderID:
Sie müssen registriert sein, um Links zu sehen.
2012/12/27 21:56:09 5CFD68 r sky [mouse] active to: 2013/02/16 11:59
2012/12/27 21:56:10 5CFD68 r sky [mouse] -----------------------------------------
2012/12/27 21:56:10 5CFD68 r sky [mouse] |id |tier |valid from |valid to |
2012/12/27 21:56:10 5CFD68 r sky [mouse] +----+--------+------------+------------+
2012/12/27 21:56:10 5CFD68 r sky [mouse] |8011|0064 |2010/04/10 |2011/04/11 |
2012/12/27 21:56:10 5CFD68 r sky [mouse] |8011|0BEA |2011/04/10 |2013/06/02 |
2012/12/27 21:56:10 5CFD68 r sky [mouse] |8011|0065 |1992/01/01 |1993/01/01 |
2012/12/27 21:56:10 5CFD68 r sky [mouse] -----------------------------------------
2012/12/27 21:56:10 5CFD68 r sky [mouse] Negotiate sessionkey was not successfull! Please check rsa key and boxkey
2012/12/27 21:56:10 5CFD68 r sky [mouse] card system not supported
2012/12/27 21:56:10 5CFD68 r sky [mouse] card initializing error
Und das ist der LOG wenn nur die HD01 ENABLED ist.
2012/12/27 21:58:40 5BAEA0 h hd01 [mouse] Restarting reader
2012/12/27 21:58:40 5BAEA0 h hd01 [mouse] creating thread for device /dev/ttyUSB0
2012/12/27 21:58:40 5D0D70 r hd01 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2012/12/27 21:58:40 5D0D70 r hd01 [mouse] card detected
2012/12/27 21:58:41 5D0D70 r hd01 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2012/12/27 21:58:41 5D0D70 r hd01 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2012/12/27 21:58:41 5D0D70 r hd01 [mouse] Setting baudrate to 9600 bps
2012/12/27 21:58:41 5D0D70 r hd01 [mouse] Calculated work ETU is 104.20 us
2012/12/27 21:58:41 5D0D70 r hd01 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2012/12/27 21:58:43 5D0D70 r hd01 [mouse] Card type: P1TV
2012/12/27 21:58:43 5D0D70 r hd01 [mouse] Rom version: 10A7
2012/12/27 21:58:43 5D0D70 r hd01 [mouse] no boxID available
2012/12/27 21:58:43 5D0D70 r hd01 [mouse] card system not supported
2012/12/27 21:58:43 5D0D70 r hd01 [mouse] Normal mode failed, reverting to Deprecated Mode
2012/12/27 21:58:44 5D0D70 r hd01 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2012/12/27 21:58:44 5D0D70 r hd01 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2012/12/27 21:58:44 5D0D70 r hd01 [mouse] Calculated work ETU is 104.20 us
2012/12/27 21:58:44 5D0D70 r hd01 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2012/12/27 21:58:46 5D0D70 r hd01 [mouse] Card type: P1TV
2012/12/27 21:58:46 5D0D70 r hd01 [mouse] Rom version: 10A7
2012/12/27 21:58:46 5D0D70 r hd01 [mouse] no boxID available
2012/12/27 21:58:46 5D0D70 r hd01 [mouse] card system not supported
2012/12/27 21:58:46 5D0D70 r hd01 [mouse] card initializing error
2012/12/27 21:58:40 5BAEA0 h hd01 [mouse] creating thread for device /dev/ttyUSB0
2012/12/27 21:58:40 5D0D70 r hd01 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2012/12/27 21:58:40 5D0D70 r hd01 [mouse] card detected
2012/12/27 21:58:41 5D0D70 r hd01 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2012/12/27 21:58:41 5D0D70 r hd01 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2012/12/27 21:58:41 5D0D70 r hd01 [mouse] Setting baudrate to 9600 bps
2012/12/27 21:58:41 5D0D70 r hd01 [mouse] Calculated work ETU is 104.20 us
2012/12/27 21:58:41 5D0D70 r hd01 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2012/12/27 21:58:43 5D0D70 r hd01 [mouse] Card type: P1TV
2012/12/27 21:58:43 5D0D70 r hd01 [mouse] Rom version: 10A7
2012/12/27 21:58:43 5D0D70 r hd01 [mouse] no boxID available
2012/12/27 21:58:43 5D0D70 r hd01 [mouse] card system not supported
2012/12/27 21:58:43 5D0D70 r hd01 [mouse] Normal mode failed, reverting to Deprecated Mode
2012/12/27 21:58:44 5D0D70 r hd01 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2012/12/27 21:58:44 5D0D70 r hd01 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2012/12/27 21:58:44 5D0D70 r hd01 [mouse] Calculated work ETU is 104.20 us
2012/12/27 21:58:44 5D0D70 r hd01 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2012/12/27 21:58:46 5D0D70 r hd01 [mouse] Card type: P1TV
2012/12/27 21:58:46 5D0D70 r hd01 [mouse] Rom version: 10A7
2012/12/27 21:58:46 5D0D70 r hd01 [mouse] no boxID available
2012/12/27 21:58:46 5D0D70 r hd01 [mouse] card system not supported
2012/12/27 21:58:46 5D0D70 r hd01 [mouse] card initializing error
Es wäre super, wenn sich einer mal die Sache anschauen könnte.
Denkt ihr, dass es an der Firmware liegen könnte? Oder ist doch ein Fehler in der Config?