Polsat Karte läuft nicht mit OScam in DREAMBOX 800se

[Tec-Hi]

Hi

hast Dir Reaktivierung schicken lassen,
wie Hier ?

ein kompletter Log von Oscam Start bis ein Sender angefragt wird
wäre sinnvoll, mit zwei Zeilen Log kann Keiner was anfangen.

HF

 

[Kevin2k1]

an bei der log, anrufen mach ich heute abend nach 21uhr. Danke.

Spoiler: oscam.log

• 2017/04/08 16:51:07 00000000 s (main) System name = Linux
• 2017/04/08 16:51:07 00000000 s (main) Host name = dm800
• 2017/04/08 16:51:07 00000000 s (main) Release = 2.6.18-7.3-dm800
• 2017/04/08 16:51:07 00000000 s (main) Version = #1 Wed Jul 21 17:43:45 CEST 2010
• 2017/04/08 16:51:07 00000000 s (main) Machine = 7401c0
• 2017/04/08 16:51:07 00000000 s (main) Stb model = dm800
• 2017/04/08 16:51:07 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 9887
• 2017/04/08 16:51:07 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
• 2017/04/08 16:51:07 00000000 s [Emu] oscam-emu version 728
• 2017/04/08 16:51:07 00000000 s (config) userdb reloaded: 21 accounts loaded, 0 expired, 1 disabled
• 2017/04/08 16:51:07 00000000 s (main) signal handling initialized
• 2017/04/08 16:51:07 00000000 s (config) 8 provid's loaded
• 2017/04/08 16:51:07 00000000 s (config) 165 service-id's loaded in 14 ms
• 2017/04/08 16:51:07 00000000 s (config) 161 tier-id's loaded
• 2017/04/08 16:51:07 00000000 s (config) 12 entries read from oscam.whitelist
• 2017/04/08 16:51:07 00000000 s (net) cs357x: initialized (fd=6, port=31559)
• 2017/04/08 16:51:07 00000000 s (net) cccam: initialized (fd=7, port=30179)
• 2017/04/08 16:51:07 00000000 s (reader) Polsat_N3 [internal] creating thread for device /dev/sci0
• 2017/04/08 16:51:07 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2017/04/08 16:51:07 00000000 s (main) waiting for local card init
• 2017/04/08 16:51:08 492AB725 h (webif) webif: decompressed 166742 bytes back into 398152 bytes
• 2017/04/08 16:51:08 492AB725 h (webif) HTTP Server running. ip=0.0.0.0 port=83
• 2017/04/08 16:51:08 6BA9CFD5 r (reader) Polsat_N3 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)
• 2017/04/08 16:51:08 6BA9CFD5 r (reader) Polsat_N3 [internal] Reader sci internal, detected box type: dm800
• 2017/04/08 16:51:09 6BA9CFD5 r (reader) Polsat_N3 [internal] card detected
• 2017/04/08 16:51:10 6BA9CFD5 r (reader) Polsat_N3 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 32 16
• 2017/04/08 16:51:10 6BA9CFD5 r (reader) Polsat_N3 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2017/04/08 16:51:10 6BA9CFD5 r (reader) Polsat_N3 [internal] Calculated work ETU is 5.93 us reader mhz = 540
• 2017/04/08 16:51:10 6BA9CFD5 r (reader) Polsat_N3 [internal] Buffers readed 0 bytes total time_us 74211
• 2017/04/08 16:51:11 6BA9CFD5 r (reader) Polsat_N3 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
• 2017/04/08 16:51:11 6BA9CFD5 r (reader) Polsat_N3 [internal] Card responded ok for ifsd request of 251
• 2017/04/08 16:51:12 6BA9CFD5 r (reader) Polsat_N3 [internal] detect native nagra card
• 2017/04/08 16:51:12 6BA9CFD5 r (reader) Polsat_N3 [internal] ready for requests
• 2017/04/08 16:51:12 6BA9CFD5 r (reader) Polsat_N3 [internal] found card system nagra
• 2017/04/08 16:51:12 6BA9CFD5 r (reader) Polsat_N3 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2017/04/08 16:51:12 6BA9CFD5 r (reader) Polsat_N3 [nagra] ROM: D N A S P 1 4 2
• 2017/04/08 16:51:12 6BA9CFD5 r (reader) Polsat_N3 [nagra] REV: R e v G 0 2
• 2017/04/08 16:51:12 6BA9CFD5 r (reader) Polsat_N3 [nagra] SER: ############
• 2017/04/08 16:51:12 6BA9CFD5 r (reader) Polsat_N3 [nagra] CAID: 1803
• 2017/04/08 16:51:12 6BA9CFD5 r (reader) Polsat_N3 [nagra] Prv.ID: 00 00 70 01 (sysid)
• 2017/04/08 16:51:12 6BA9CFD5 r (reader) Polsat_N3 [nagra] Prv.ID: 00 00 00 00
• 2017/04/08 16:51:12 6BA9CFD5 r (reader) Polsat_N3 [nagra] IRD ID: ############
• 2017/04/08 16:51:12 6BA9CFD5 r (reader) Polsat_N3 [nagra] active to: 2017/06/09 12:59
• 2017/04/08 16:51:13 6BA9CFD5 r (reader) Polsat_N3 [nagra] -----------------------------------------
• 2017/04/08 16:51:13 6BA9CFD5 r (reader) Polsat_N3 [nagra] |id |tier |valid from |valid to |
• 2017/04/08 16:51:13 6BA9CFD5 r (reader) Polsat_N3 [nagra] +----+--------+------------+------------+
• 2017/04/08 16:51:13 6BA9CFD5 r (reader) Polsat_N3 [nagra] -----------------------------------------
• 2017/04/08 16:51:13 00000000 s (main) init for all local cards done
• 2017/04/08 16:51:13 00000000 s (emmcache) loaded 1 emmcache records from /etc/tuxbox/config/oscam.emmcache in 1 ms
• 2017/04/08 16:51:13 00000000 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/oscam.emmstat in 1 ms
• 2017/04/08 16:51:13 00000000 s (anticasc) anti cascading disabled
• 2017/04/08 16:51:13 44D8930A c (client) plain dvbapi-client granted (dvbapi_local, au=auto (3 reader))
• 2017/04/08 16:51:13 44D8930A c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
• 2017/04/08 16:51:13 44D8930A c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 0201 length: 76)
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 ecmpid 0 CAID: 186C ECM_PID: 0209 PROVID: 000000
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1861 ECM_PID: 020A PROVID: 000000
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1803 ECM_PID: 020B PROVID: 000000
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0100 ECM_PID: 020C PROVID: 000068 PBM: FFFFFFFFFFFFFFF DATE: 1-4-2010
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 ecmpid 4 CAID: 0B01 ECM_PID: 020E PROVID: 000000
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 ecmpid 5 CAID: 0500 ECM_PID: 020F PROVID: 032A00
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 ecmpid 6 CAID: 1813 ECM_PID: 020C PROVID: 000068
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 ecmpid 7 CAID: 1884 ECM_PID: 0210 PROVID: 000000
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 stream Audiostream (MPEG-1)(type: 03 pid: 0202 length: 76)
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 stream Audiostream (MPEG-1)(type: 03 pid: 0203 length: 76)
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0108 length: 0)
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 found 8 ECMpids and 4 STREAMpids in caPMT
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 serving srvid 3391 (Polsat HD) on adapter 0000 camask 0001 index 0000 pmtpid 0031
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 1803 PROVID 000000 ECMPID 020B ANY CHID PMTPID 0031 VPID 0201
• 2017/04/08 16:51:17 44D8930A c (ecm) dvbapi_local (1803@000000/0000/3391/92:00000000000000000000000000000000): invalid (2 ms) - Polsat HD
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 7 disabled ecmpids!
• 2017/04/08 16:51:17 44D8930A c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 1803 PROVID 000000 ECMPID 020B ANY CHID PMTPID 0031 VPID 0201
• 2017/04/08 16:51:18 44D8930A c (ecm) dvbapi_local (1803@000000/0000/3391/92:00000000000000000000000000000000): invalid (1 ms) - Polsat HD
• 2017/04/08 16:51:18 44D8930A c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 7 disabled ecmpids!
• 2017/04/08 16:51:18 44D8930A c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 1803 PROVID 000000 ECMPID 020B ANY CHID PMTPID 0031 VPID 0201
• 2017/04/08 16:51:18 44D8930A c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 0201 length: 97)
• 2017/04/08 16:51:18 44D8930A c (dvbapi) Demuxer 0 stream Audiostream (MPEG-1)(type: 03 pid: 0202 length: 92)
• 2017/04/08 16:51:18 44D8930A c (dvbapi) Demuxer 0 stream Audiostream (MPEG-1)(type: 03 pid: 0203 length: 92)
• 2017/04/08 16:51:18 44D8930A c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0108 length: 15)
• 2017/04/08 16:51:18 44D8930A c (dvbapi) Demuxer 0 found 8 ECMpids and 4 STREAMpids in PMT
• 2017/04/08 16:51:18 44D8930A c (dvbapi) Demuxer 0 serving srvid 3391 (Polsat HD) on adapter 0000 camask 0001 index 0000 pmtpid 0031
• 2017/04/08 16:51:18 44D8930A c (ecm) dvbapi_local (1803@000000/0000/3391/92:00000000000000000000000000000000): invalid (1 ms) - Polsat HD

 

[Tec-Hi]

Hi

hast die Entis rausgelöscht,
oder sind keine da ?

HF

 

[Kevin2k1]

Es sind keine da.

 

[Kevin2k1]

Hi!
Kann man ausser Oscam noch ein anderes Protokoll nehmen?
Entis sind bisher auch nicht reingekommen, werder über TVP2 noch Polsat HD oder Food-

lg.

 

[dodo83]

OScam ist KEIN Protocol

 

[czutok]

dann ist die karte abgeschaltet , wenn bis jetzt kein einziger enti angekommen ist

oder deine oscam einstelungen sind echt für den .....

PS.
caid = 1801:1803,1803,1861 - hier soltest du dich entscheiden was du hast , 1801 , 1803 oder 1861

blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1

und wenn du die emms blokst , wieso wunderst du dich das da nichts ankommt ??

lösche das mal und starte oscam neu

 

[Kevin2k1]

Hi!

Danke für die Info. Habe den Reader wie von adas config übernommen:

Spoiler

[reader]
label = Polsat_N3
protocol = internal
device = /dev/sci1
caid = 1803
boxkey =
rsakey =
detect = cd
mhz = 450
cardmhz = 2700
ident = 1803:007001,007101,000000
group = 6
emmcache = 0,1,1,2
lb_weight = 300

Es kommt irgendwie was durch, allerdings scheint bei der Karte nix anzukommen oder das falsche (die unteren Zahlen ist die PL Karte= :

 

[dodo83]

die EMM werden doch geschrieben, also kommt da schon was auf die Karte, ob es das richtige ist weiß nur Polsat,
noch keine Entitlements drauf jetzt? OScam neu gestartet mal?

 

[Kevin2k1]

ja, mehrmals neugestartet. glaube dann bleibt mir echt nur das einsenden der karte

 

[DigiPolak]

[reader]
label = CyfrowyPolsat
protocol = smartreader
device = 001:008
caid = 1803
boxkey =
rsakey =
fix07 = 0
detect = cd
nagra_read = 1
detect_seca_nagra_tunneled_card= 0
mhz = 534
cardmhz = 480
ident = 1803:007001,007101,000000
group = 7
emmcache = 1,3,2,0

So habe ich es bei mir gehabt! Und ohne Probleme hat es funktioniert nur musste ich einmal anrufen weil keiner Polsat geschaut hat ! ;D

 

[Kevin2k1]

ok, das probiere ich nochmal aus...danke

 

[Kevin2k1]

Hi Leute!
Habe nun eine neue Karte bekommen. Allerdings mit CAID 1861. Ist da was zu beachten?

Spoiler

• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] ROM: D N A S P 1 8 0
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] REV: M e r 0 0 0
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] SER: ############
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] CAID: 1861
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] Prv.ID: 00 00 70 01 (sysid)
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] Prv.ID: 00 00 00 00
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] IRD ID: ############
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] active to: 2017/06/05 04:02
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] -----------------------------------------
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] |id |tier |valid from |valid to |
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] +----+--------+------------+------------+
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] |7101|17C4 |1970/01/-16819 |1992/01/31 |
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] |7101|17C5 |1970/01/-16819 |1992/01/31 |
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] |7101|877B |2017/01/20 |2017/03/23 |
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] |7101|7EE6 |2017/04/04 |2017/06/05 |
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] |7101|7EE5 |2017/04/04 |2017/06/05 |
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] |7101|150A |2017/04/04 |2017/06/05 |
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] |7101|E7D6 |2017/04/04 |2017/06/05 |
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] |7101|7EFD |2017/04/04 |2017/06/05 |
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] |7101|163C |2017/04/04 |2017/06/05 |
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] |7101|7EE8 |2017/04/04 |2017/06/05 |
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] |7101|7F79 |2017/04/04 |2017/06/05 |
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] |7101|7EE7 |2017/04/04 |2017/06/05 |
• 2017/05/10 22:40:00 6874F3A2 r (reader) Polsat_N3 [nagra] -----------------------------------------

lg.

 

[fun7]

nö

 

[Kevin2k1]

Danke. hatte caid geändert und nun läuft es wieder. Danke.