Pingulux Plus Sky V14 Cardreader Probleme

[Zaunpfahl]

Hi,

ich betreibe meinen Pingulux Plus mit dem Neutrino martiiGit-by-FFTeam Image. Habe vor kurzem eine V14 Sky Karte bekommen. Kriege diese aber über Oscam nicht zum laufen. Oscam Version ist die 1.20 unstable. (hab auch schon andere probiert)
Bekomme immer die Fehlermeldung: 583488 r v14 [internal] Error activating card.

Hier meine Config:

Spoiler

oscam conf:

Spoiler

[global]
logfile = stdout
nice = -1

[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox #beim Pingulux kein Eintrag nötig

[webif]
httpport = 83
httpuser = test
httppwd = 1234
httphelplang = de
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[cccam]
port = 35838
reshare = 1
ignorereshare = 0
version = 2.2.1
reshare_mode = 0

oscam.user:

Spoiler

[account]
user = lokal
pwd =
group = 1
au = 1

[account]
user = test1
pwd = test1
group = 1

[account]
user = receiver2
pwd = receiver2
group = 1

oscam server:

Spoiler

[reader]
label = v14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
mhz = 500
cardmhz = 500
group = 1
emmcache = 1,1,2
ins7e11 = 15
ndsversion = 2

oscam.dvbapi

Spoiler

P: 098C
I:0

Gruß Zaunpfahl

 

[Pilot]

AW: Pingulux Plus Sky V14 Cardreader Probleme

Hallo Zaunpfahl,

dein V14 Karte muß wahrscheinlich erst aktiviert werden.
Teste folgendes:
1. starte mit spark
2. deaktiviere Conax im Menü
3. starte mcas im Menü Plugins.
4. schie Karte richtig rein Chip nach oben und zum receiver weisend.
5. stell auf Sky Sport News HD. Nicht zappen. 30min draf bleiben. Auch wenn es hell wird nicht zappen.
6. bleib es dunkel: sende dir selbst ein Freischalt Signal:

Sie müssen registriert sein, um Links zu sehen.

Mlg Pilot

 

[Zaunpfahl]

AW: Pingulux Plus Sky V14 Cardreader Probleme

Hatte die Karte falsch herum... xD
Bei dem Sky Receiver kommt die anders rum rein xD
Jetzt funktioniert es. =)
Kriegs nur mit dem Oscam ymod nicht zum laufen.

Danke für die Hilfe =)

Gruß Zaunpfahl

 

[Pilot]

AW: Pingulux Plus Sky V14 Cardreader Probleme

Was steht im wi von oscam?
cardok


Mlg Pilot

 

[Zaunpfahl]

AW: Pingulux Plus Sky V14 Cardreader Probleme

Also hab es gerade mit der oscam 1.20 unstable laufen. Da funktioniert es ne halbe Stunde lang un dann fängt das Bild an zu ruckeln und bleibt i-wann ganz stehen. Receiver reagiert dann auch nicht mehr.

oscam1.20 unstable:

Spoiler

2014/01/06 16:47:16 583488 r sky_v14 [internal] Rom version: 20AA
2014/01/06 16:47:16 583488 r sky_v14 [internal] parental lock setting: FF FF FF FF
2014/01/06 16:47:16 583488 r sky_v14 [internal] type: VideoGuard Sky Germany (098C), caid: 098C
2014/01/06 16:47:16 583488 r sky_v14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2014/01/06 16:47:16 583488 r sky_v14 [internal] ready for requests
2014/01/06 16:47:16 583488 r sky_v14 [internal] found card system videoguard2
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] card detected
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] type: VideoGuard Sky Germany (098C)
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 0046, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 0065, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 0066, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 0069, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 006a, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 006b, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 006f, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 007b, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 007d, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 0081, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 008e, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 00c0, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 00c7, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 00c9, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 00e4, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 00e5, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 00f3, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 00fa, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:16 583488 r sky_v14 [videoguard2] tier: 00ff, expiry date: 2014/02/23-00:00:00
2014/01/06 16:47:22 0 s init for all local cards done
2014/01/06 16:47:22 0 s anti cascading disabled
2014/01/06 16:47:22 5954F0 c plain dvbapi-client granted (lokal, au=auto (1 reader))
2014/01/06 16:47:22 5954F0 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
2014/01/06 16:47:26 5954F0 c dvbapi: [ADD PID 0] CAID: 1833 ECM_PID: 1898 PROVID: 000000
2014/01/06 16:47:26 5954F0 c dvbapi: [ADD PID 1] CAID: 09C4 ECM_PID: 1B98 PROVID: 000000
2014/01/06 16:47:26 5954F0 c dvbapi: [ADD PID 2] CAID: 09AF ECM_PID: 1F98 PROVID: 000000
2014/01/06 16:47:26 5954F0 c dvbapi: [ADD PID 3] CAID: 098C ECM_PID: 1A98 PROVID: 000000
2014/01/06 16:47:26 5954F0 c dvbapi: Found 4 ECMpids and 4 STREAMpids in PMT
2014/01/06 16:47:26 5954F0 c dvbapi: New program number: 0076 (NatGeo Wild HD) [pmt_list_management 3]
2014/01/06 16:47:27 5954F0 c dvbapi: Start descrambling PID #3 (CAID: 098C) 1
2014/01/06 16:47:27 5954F0 c lokal (098C&000000/0000/0076/98:7600D2E28399C9AA376D58EDDA9F60C4): found (117 ms) by sky_v14
2014/01/06 16:47:29 5954F0 c lokal (098C&000000/0000/0076/9824B8F9C5C723F786F30FD346DBA441D): found (114 ms) by sky_v14

Mit dem y-mod sieht das ganze dann so aus:

Spoiler

2014/01/06 16:53:09 1838 296B2000 s >> OSCam << cardserver started version ymodv18-t39, build #0 (sh4-amino-linux)
2014/01/06 16:53:09 1838 296B2000 s version=ymodv18-t39, build #0, system=sh4-amino-linux, nice=-1
2014/01/06 16:53:09 1838 296B2000 s client max. idle=120 sec, debug level=0
2014/01/06 16:53:09 1838 296B2000 s max. logsize=unlimited
2014/01/06 16:53:09 1838 296B2000 s client timeout=5000 ms, fallback timeout=2500 ms, fallbacks=1, cache delay=0 ms
2014/01/06 16:53:09 1838 296B2000 s auth size=17920
2014/01/06 16:53:09 1838 296B2000 s Cannot open file "/var/keys/oscam.services" (errno=2)
2014/01/06 16:53:09 1838 296B2000 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2014/01/06 16:53:09 1838 296B2000 s signal handling initialized (type=sysv)
2014/01/06 16:53:09 1838 296B2000 s 248 service-id's loaded
2014/01/06 16:53:09 1838 296B2000 s 140 tier-id's loaded
2014/01/06 16:53:09 1838 296B2000 s can't open file "/var/keys/oscam.provid" (err=2), no provids's loaded
2014/01/06 16:53:09 1838 296B2000 s can't open file "/var/keys/oscam.ird" (errno=2) irdeto guessing not loaded
2014/01/06 16:53:09 1838 296B2000 s monitor: disabled
2014/01/06 16:53:09 1838 296B2000 s camd33: disabled
2014/01/06 16:53:09 1838 296B2000 s camd35: disabled
2014/01/06 16:53:09 1838 296B2000 s cs378x: disabled
2014/01/06 16:53:09 1838 296B2000 s newcamd: disabled
2014/01/06 16:53:09 1838 296B2000 s cccam: initialized (fd=10, port=35838, crypted)
2014/01/06 16:53:09 1838 296B2000 s radegast: disabled
2014/01/06 16:53:09 1838 296B2000 s http thread started
2014/01/06 16:53:09 1838 296B2000 s creating thread for device /dev/sci0
2014/01/06 16:53:09 1838 296B2000 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/01/06 16:53:09 1838 296B2000 s waiting for local card init
2014/01/06 16:53:09 1838 2B6CD4C8 r reader thread started (thread=2B6CD4C8, label=sky_v14, device=/dev/sci0, detect=cd, mhz=5, cardmhz=5)
2014/01/06 16:53:09 1838 2AECD4C8 h HTTP Server listening on port 83
2014/01/06 16:53:09 1838 2B6CD4C8 r sky_v14 card detected
2014/01/06 16:53:16 1838 2B6CD4C8 r no swap
2014/01/06 16:53:16 1838 2B6CD4C8 r no swap
2014/01/06 16:53:16 1838 2B6CD4C8 r [videoguard2-reader] classD0 ins7E11: perfoming card reset for TA1 change from 13 to 15
2014/01/06 16:53:21 1838 2B6CD4C8 r ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/01/06 16:53:22 1838 2B6CD4C8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 0.05 Mhz
2014/01/06 16:53:23 1838 2B6CD4C8 r 111
2014/01/06 16:53:23 1838 2B6CD4C8 r no swap
2014/01/06 16:53:23 1838 2B6CD4C8 r no swap
2014/01/06 16:53:23 1838 2B6CD4C8 r no swap
2014/01/06 16:53:23 1838 2B6CD4C8 r no swap
2014/01/06 16:53:23 1838 2B6CD4C8 r [videoguard2-reader] classD0 ins7E11: perfoming card reset for TA1 change from 13 to 15
2014/01/06 16:53:28 1838 2B6CD4C8 r ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/01/06 16:53:29 1838 2B6CD4C8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 0.05 Mhz
2014/01/06 16:53:30 1838 2B6CD4C8 r 111
2014/01/06 16:53:30 1838 2B6CD4C8 r no swap
2014/01/06 16:53:30 1838 2B6CD4C8 r no swap
2014/01/06 16:53:30 1838 2B6CD4C8 r no swap
2014/01/06 16:53:30 1838 2B6CD4C8 r no swap
2014/01/06 16:53:30 1838 2B6CD4C8 r [videoguard2-reader] classD0 ins7E11: perfoming card reset for TA1 change from 13 to 15
2014/01/06 16:53:35 1838 2B6CD4C8 r ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/01/06 16:53:36 1838 2B6CD4C8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 0.05 Mhz
2014/01/06 16:53:37 1838 2B6CD4C8 r 111
2014/01/06 16:53:37 1838 2B6CD4C8 r no swap
2014/01/06 16:53:37 1838 2B6CD4C8 r no swap
2014/01/06 16:53:37 1838 2B6CD4C8 r no swap
2014/01/06 16:53:37 1838 2B6CD4C8 r no swap
2014/01/06 16:53:37 1838 2B6CD4C8 r [videoguard2-reader] classD0 ins7E11: perfoming card reset for TA1 change from 13 to

 

[Pilot]

AW: Pingulux Plus Sky V14 Cardreader Probleme

teste dies oscam Version: Link ist nicht mehr aktiv.
Die läuft bei mir als Client perfekt
les dich mal hier ein: https://www.digital-eliteboard.com/...bracht-haben&p=2097332&viewfull=1#post2097332

Mlg Pilot

 

[Zaunpfahl]

AW: Pingulux Plus Sky V14 Cardreader Probleme

Mit dieser oscam Version läuft es bis jetzt.

Vielen Dank für deine Hilfe

Gruß Zaunpfahl