Problema Oscam S*Y IT 09cd nn fungie AIUTO!

[marinu]

Ciao raga,
ho ricevuto la nuova scheda da s*y, l`ho attivata e l`ho inserita nello smargo del server Debian x86 ch ho usato fin ora, ho cambiato 0919 per 09cd nei config.

oscam.conf

Spoiler

[global]nice = -19
WaitForCards = 1
[monitor]
port = 988
aulow = 120
monlevel = 0
[newcamd]
key = xxxxx
port = xxxx@09CD:000000
logfile = /var/log/oscam.log
disablelog = 0

oscam.server

Spoiler

[reader]Label = SkyItalia
Protocol = mouse
Detect = cd
Device = /dev/ttyUSB1
EMMCache = 1,3,2
#EMMCache = 1,1,2 setting originale
Group = 1
CAID = 09CD
BoxID = xxxxxxxx

oscam.user

Spoiler

[account]user = xxxx
pwd = xxxx
group = 1
uniq = 1
caid = 09CD
ident = 09CD:000000
AU = SkyItalia
monlevel = 0

e ricevo questo errore
oscam.log

Spoiler

------------------------------------------------------------------------------->> OSCam << cardserver started at Wed Jun 11 14:41:03 2014
-------------------------------------------------------------------------------
2014/06/11 14:41:03 2645 s version=0.99.4svn, build #1939, system=i686-pc-linux, nice=-19
2014/06/11 14:41:03 2645 s max. clients=509, client max. idle=120 sec
2014/06/11 14:41:03 2645 s max. logsize=unlimited
2014/06/11 14:41:03 2645 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2014/06/11 14:41:03 2645 s shared memory initialized (size=4177188, id=0)
2014/06/11 14:41:03 2645 s auth size=4752
2014/06/11 14:41:03 2645 s Cannot open file "/usr/local/etc/oscam.services" (errno=2)
2014/06/11 14:41:03 2645 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2014/06/11 14:41:03 2645 s signal handling initialized (type=sysv)
2014/06/11 14:41:03 2645 s can't open file "/usr/local/etc/oscam.srvid" (err=2), no service-id's loaded
2014/06/11 14:41:03 2646 s monitor: initialized (fd=6, port=988)
2014/06/11 14:41:03 2646 s camd 3.3x: disabled
2014/06/11 14:41:03 2646 s camd 3.5x: disabled
2014/06/11 14:41:03 2646 s cs378x: disabled
2014/06/11 14:41:03 2646 s newcamd: initialized (fd=7, port=34000, crypted)
2014/06/11 14:41:03 2646 s CAID: 09CD
2014/06/11 14:41:03 2646 s provid #0: 000000
2014/06/11 14:41:03 2646 s cccam: disabled
2014/06/11 14:41:03 2646 s radegast: disabled
2014/06/11 14:41:03 2646 s resolver thread started
2014/06/11 14:41:03 2646 s logger started (pid=2649)
2014/06/11 14:41:03 2646 s resolver started (pid=2650, delay=30 sec)
2014/06/11 14:41:03 2646 s reader started (pid=2651, device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2014/06/11 14:41:03 2646 s waiting for local card init
2014/06/11 14:41:06 2651 r02 card detected
2014/06/11 14:41:12 2651 r02 ATR: 3F FD 13 25 02 50 80 0F 54 B0 04 69 FF 4A 50 D0 80 00 49 54 03
2014/06/11 14:41:13 2651 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2014/06/11 14:41:14 2651 r02 [videoguard2-reader] type: VideoGuard, caid: 09CD, serial: xxxxxxxx, BoxID: xxxxxxxx
2014/06/11 14:41:14 2651 r02 [videoguard2-reader] ready for requests
2014/06/11 14:41:14 2651 r02 [videoguard2-reader] card detected
2014/06/11 14:41:14 2651 r02 [videoguard2-reader] type: VideoGuard
2014/06/11 14:41:15 2646 s init for all local cards done
2014/06/11 14:41:15 2646 s anti cascading disabled

poi ho atualizato oscam, cambiandolo in emu/oscam e usr/local/bin con cuesta oscam-svn9760-i686-webif-Distribution.tar da hxxp://download.oscam.cc/

ma nn trovo neanche oscam.log (no so se parte...)

Mi potet aiutare??

ciao, marinu

 

[iguana82]

Prova inserendo nel reader
Mhz = 357
Cardmhz = 2700


Inviato dal mio GT-I9300 utilizzando Tapatalk

 

[marinu]

AW: Oscam S*Y IT 09cd nn fungie AIUTO!

ho gia provato a cambiare i mhz ma nn fungie...

 

[gianni32]

Re: AW: Oscam S*Y IT 09cd nn fungie AIUTO!

guarda che le ultime card (0004)oscam non le legge

 

[iguana82]

Oscam legge sia le 0004 che le 0003 ma su alcune ultime 0003 pur dando i found lo schermo rimane buio....cmq servirebbe il log completo di oscam nel momento in cui legge la card. Quello che hai postato non è completo...non si vedono errori.

Inviato dal mio GT-I9300 utilizzando Tapatalk

 

[marinu]

AW: Oscam S*Y IT 09cd nn fungie AIUTO!

Ciao raga,

In primis grazie x interessarvi al mio caso... Ho una 0003!

Qui vi mando il log dove si vedono gli errori.

Spoiler

>> OSCam << cardserver started at Fri Jun 13 08:02:57 2014-------------------------------------------------------------------------------
2014/06/13 8:02:57 2645 s version=0.99.4svn, build #1939, system=i686-pc-linux, nice=-19
2014/06/13 8:02:57 2645 s max. clients=509, client max. idle=120 sec
2014/06/13 8:02:57 2645 s max. logsize=unlimited
2014/06/13 8:02:57 2645 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2014/06/13 8:02:57 2645 s shared memory initialized (size=4177188, id=0)
2014/06/13 8:02:57 2645 s auth size=4752
2014/06/13 8:02:57 2645 s Cannot open file "/usr/local/etc/oscam.services" (errno=2)
2014/06/13 8:02:57 2645 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2014/06/13 8:02:57 2645 s signal handling initialized (type=sysv)
2014/06/13 8:02:57 2645 s can't open file "/usr/local/etc/oscam.srvid" (err=2), no service-id's loaded
2014/06/13 8:02:57 2646 s monitor: initialized (fd=6, port=988)
2014/06/13 8:02:57 2646 s camd 3.3x: disabled
2014/06/13 8:02:57 2646 s camd 3.5x: disabled
2014/06/13 8:02:57 2646 s cs378x: disabled
2014/06/13 8:02:57 2646 s newcamd: initialized (fd=7, port=34000, crypted)
2014/06/13 8:02:57 2646 s CAID: 09CD
2014/06/13 8:02:57 2646 s provid #0: 000000
2014/06/13 8:02:57 2646 s cccam: disabled
2014/06/13 8:02:57 2646 s radegast: disabled
2014/06/13 8:02:57 2646 s resolver thread started
2014/06/13 8:02:57 2646 s logger started (pid=2649)
2014/06/13 8:02:57 2646 s resolver started (pid=2650, delay=30 sec)
2014/06/13 8:02:57 2646 s reader started (pid=2651, device=/dev/ttyUSB1, detect=cd, mhz=500, cardmhz=500)
2014/06/13 8:02:57 2646 s waiting for local card init
2014/06/13 8:02:59 2651 r02 card detected
2014/06/13 8:03:05 2651 r02 ATR: 3F FD 13 25 02 50 80 0F 54 B0 04 69 FF 4A 50 D0 80 00 49 54 03
2014/06/13 8:03:07 2651 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2014/06/13 8:03:08 2651 r02 [videoguard2-reader] type: VideoGuard, caid: 09CD, serial: xxxxxxx, BoxID: xxxxxxx
2014/06/13 8:03:08 2651 r02 [videoguard2-reader] ready for requests
2014/06/13 8:03:08 2651 r02 [videoguard2-reader] card detected
2014/06/13 8:03:08 2651 r02 [videoguard2-reader] type: VideoGuard
2014/06/13 8:03:08 2646 s init for all local cards done
2014/06/13 8:03:08 2646 s anti cascading disabled
2014/06/13 8:03:13 2646 s client(1) connect from 127.0.0.1 (pid=2686, pipfd=12)
2014/06/13 8:03:13 2686 c01 encrypted newcamd:34000-client 127.0.0.1 granted (user1, au=skyitalia)
2014/06/13 8:03:13 2686 c01 user user1 authenticated successfully (using client 4343)
2014/06/13 8:03:13 2686 c01 AU flag 0 for user user1
2014/06/13 8:03:16 2686 c01 user1 (09CD&000000/2AB1/B7:E660): not found (0 ms)
2014/06/13 8:03:26 2686 c01 user1 (09CD&000000/2AB1/B7:78A2): not found (1 ms)
2014/06/13 8:03:27 2686 c01 user1 (09CD&000000/2C91/B7681): not found (0 ms)
2014/06/13 8:04:16 2686 c01 user1 (09CD&000000/2BD0/B7:BAF7): not found (0 ms)
2014/06/13 8:04:17 2686 c01 user1 (09CD&000000/2B0F/B7:32A3): not found (0 ms)
2014/06/13 8:04:36 2686 c01 user1 (09CD&000000/3BF0/B7:F712): not found (0 ms)
2014/06/13 8:04:36 2686 c01 user1 (09CD&000000/2BCC/B7:8F18): not found (0 ms)
2014/06/13 8:04:36 2686 c01 user1 (09CD&000000/3902/B7:7939): not found (0 ms)
2014/06/13 8:04:46 2686 c01 user1 (09CD&000000/2BD7/B7:CA11): not found (0 ms)
2014/06/13 8:04:58 2686 c01 user1 (09CD&000000/2D57/B7:1AE4): not found (1 ms)
2014/06/13 8:05:15 2686 c01 user1 (09CD&000000/0FF5/B7:3A98): not found (0 ms)
2014/06/13 8:05:28 2686 c01 user1 (09CD&000000/0E2A/B7:CBF3): not found (1 ms)
2014/06/13 8:05:36 2686 c01 user1 (09CD&000000/2BD7/B7:1125): not found (0 ms)
2014/06/13 8:05:40 2686 c01 user1 (09CD&000000/2C38/B7:8491): not found (0 ms)
2014/06/13 8:05:42 2686 c01 user1 (09CD&000000/2D5C/B7:EA68): not found (1 ms)

Ciao, marinu

 

[iguana82]

Hai provato se nel dec originale la legge?

Inviato dal mio GT-I9300 utilizzando Tapatalk

 

[elcoro]

AW: Oscam S*Y IT 09cd nn fungie AIUTO!

ho gia provato a cambiare i mhz ma nn fungie...

nelle conf da te postate non si legge ne il mhz e neppure il cardmhz.
l´errore che ti da e che la card non viene letta quindi e un problema di conf.

 

[marinu]

AW: Oscam S*Y IT 09cd nn fungie AIUTO!

nelle conf da te postate non si legge ne il mhz e neppure il cardmhz.
l´errore che ti da e che la card non viene letta quindi e un problema di conf.

Scusa, l`ho messo e tolto dopo...

All momento cosi:Mhz = 500Cardmhz = 500

Cosa mi consigli?

ciao

 

[elcoro]

AW: Oscam S*Y IT 09cd nn fungie AIUTO!

Che oscam Stai usando la versione, riavvia la oscam e posta il log

 

[marinu]

AW: Oscam S*Y IT 09cd nn fungie AIUTO!

Ciao, dato che nn riuscivo a far partire l`oscam nel server vechio mi sono deciso di farne uno nuovo...

oscam.log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jun 14 15:46:11 2014
-------------------------------------------------------------------------------
2014/06/14 15:46:11 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9763 (i486-linux-gnu-libusb)
2014/06/14 15:46:11 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2624
2014/06/14 15:46:11 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/14 15:46:11 0 s signal handling initialized
2014/06/14 15:46:11 0 s monitor: initialized (fd=5, port=988)
2014/06/14 15:46:11 0 s newcamd: initialized (fd=6, port=34000)
2014/06/14 15:46:11 0 s -> CAID: 09CD PROVID: 000000
2014/06/14 15:46:11 0 s http disabled
2014/06/14 15:46:11 0 s SkyItalia [mouse] creating thread for device /dev/ttyUSB1
2014/06/14 15:46:11 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/06/14 15:46:11 0 s waiting for local card init
2014/06/14 15:46:11 B74006A8 r SkyItalia [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=500, cardmhz=500)
2014/06/14 15:46:12 B74006A8 r SkyItalia [mouse] card detected
2014/06/14 15:46:15 B74006A8 r SkyItalia [mouse] ATR: 3F FD 13 25 02 50 80 0F 54 B0 04 69 FF 4A 50 D0 80 00 49 54 03
2014/06/14 15:46:15 B74006A8 r SkyItalia [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/06/14 15:46:15 B74006A8 r SkyItalia [mouse] Setting baudrate to 53763 bps
2014/06/14 15:46:15 B74006A8 r SkyItalia [mouse] Calculated work ETU is 18.60 us reader mhz = 500
2014/06/14 15:46:15 B74006A8 r SkyItalia [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.00 MHz (specified in reader->mhz)
2014/06/14 15:46:18 B74006A8 r SkyItalia [mouse] card system not supported
2014/06/14 15:46:18 B74006A8 r SkyItalia [mouse] Normal mode failed, reverting to Deprecated Mode
2014/06/14 15:46:22 B74006A8 r SkyItalia [mouse] ATR: 3F FD 13 25 02 50 80 0F 54 B0 04 69 FF 4A 50 D0 80 00 49 54 03
2014/06/14 15:46:22 B74006A8 r SkyItalia [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/06/14 15:46:22 B74006A8 r SkyItalia [mouse] Calculated work ETU is 74.40 us reader mhz = 500
2014/06/14 15:46:22 B74006A8 r SkyItalia [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.00 MHz (specified in reader->mhz)
2014/06/14 15:46:25 B74006A8 r SkyItalia [mouse] card system not supported
2014/06/14 15:46:25 B74006A8 r SkyItalia [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/06/14 15:46:25 B74006A8 r SkyItalia [mouse] card initializing error
2014/06/14 15:46:26 0 s init for all local cards done
2014/06/14 15:46:26 0 s anti cascading disabled
2014/06/14 15:46:26 B7402F80 c client connected to 34000 port
2014/06/14 15:46:26 B7402F80 c encrypted newcamd:34000-client 127.0.0.1 granted (user1, au=on (1 reader))
2014/06/14 15:46:26 B7402F80 c user user1 authenticated successfully (CCcam)
2014/06/14 15:46:26 B7402F80 c AU disabled for user user1
2014/06/14 15:47:30 0 s killing client user1
2014/06/14 15:47:30 0 s SkyItalia [mouse] Killing reader
2014/06/14 15:47:30 0 s userdb 1 accounts freed
2014/06/14 15:47:30 0 s readerdb 1 readers freed
2014/06/14 15:47:30 0 s cardserver down

con i stessi settings... come sopra!

 

[elcoro]

AW: Oscam S*Y IT 09cd nn fungie AIUTO!

Con le nuove oscam Su config si deve attivare autospeed e cambiare MHz, perché non ti viene Lette la Card

 

[marinu]

AW: Oscam S*Y IT 09cd nn fungie AIUTO!

Ho messo autospeed = 1 ma continua a nn fungiere, nn mi potresti mandare una oscam.conf funzionante?

te ne sarei grato...

 

[elcoro]

AW: Oscam S*Y IT 09cd nn fungie AIUTO!

ma se ti collegi al debian tramite putty fai il login e dopo dai il comando

ps -aux

dovresti vedere se la oscam e avviata

 

[marinu]

AW: Oscam S*Y IT 09cd nn fungie AIUTO!

provo sta sera...