gelöst Oscam Probleme

[Pilot]

Sorry, habe den Fehler gefunden, Karte war richtig rum drinne, nur hatte ich bei der Zuordnung sci0 und sci1 (oben/unten) vertauscht :confounded:

Hast du nach dem Umstecken der Karte oscam neu gestartet.
Eventuell danach box neu booten

 

[manchuu]

Hast du nach dem Umstecken der Karte oscam neu gestartet.
Eventuell danach box neu booten

Ja, nach dem Umstecken oscam Neustart und Box Neustart durchgeführt, aber er kann die V13 nicht initialisieren

Habe jetzt auch mal testweise andere 11571/11572/11570er und 11568er Versionen hier aus´m deb getestet und auch mal im unteren Schacht getestet, aber immer der gleiche Fehler
Es kann doch nicht sein, dass all diese Versionen die V13 nicht lesen können!?
Ich weiß aber auch nicht, was ich in den Einstellungen noch ändern könnte...

Oder hat einer vielleicht eine 11571 oder 11572er Version erfolgreich mit der V13 zufällig in einer Dreambox am laufen, die er mir mal schicken könnte zum testen?

 

[pehedima]

Das liegt nicht an der oscam Version.
Poste bitte immer deine aktuellen Configs und die oscam.log vom oscam Start an.

 

[filius00]

Versionen die V13 nicht lesen können!?

Jede poppelige Oscam Version kann die V13 grundsätzlich erst mal lesen, ob es dann hell wird ist eine andere Frage.
Falls die Configs von Seite 1 noch Bestand haben fehlt das schon mal im Server

ndsversion = 2

 

[leo14]

Das fehlt auch noch in der server.conf

detect = cd

 

[pehedima]

detect = cd (default).
Wird der Reader dann mittels oscam abgespeichert werden i.d.R. alle Parameter, die Defaultwerte besitzen automatisch entfernt.

 

[leo14]

Hab ich schon immer drin und mir sind eigentlich keine negativen Einflüsse aufgefallen.

 

[pehedima]

Wieso negative Einflüsse?

Ob der Parameter detect = cd im Reader enthalten ist oder der Parameter detect komplett fehlt ist absolut identisch, denn 'cd' ist der Defaultwert und wird immer dann genommen, wenn der Parameter komplett fehlt.

Hoffe, dass war jetzt verständich genug :smile:

 

[manchuu]

Das liegt nicht an der oscam Version.
Poste bitte immer deine aktuellen Configs und die oscam.log vom oscam Start an.

Anbei die Configs mit Ausgabe...

Spoiler: oscam Version

Version: oscam-1.20_svn-r11571
Compiler: mipsel-unknown-linux-gnu-libusb
Box type: dm800sev2 (generic)

Spoiler: oscam.conf

[global]
logfile = /dev/tty
nice = -1
preferlocalcards = 1

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = dvbapi
boxtype = dreambox

[webif]
httpport = XX
httpuser = user
httppwd = pass
httphelplang = de
httprefresh = 10
httppollrefresh = 10
httpallowed = 0.0.0.0-0.0.0.0
aulow = 120
http_status_log = 1

Spoiler: oscam.user

[account]
user = dvbapi
au = 1
group = 3

Spoiler: oscam.server

[reader]
label = SKY_V13_oben
description = sky
protocol = internal
device = /dev/sci0
reconnectdelay = 6000
caid = 09C4
boxid = DXXXXXXA
ins7e = 42XXXXXXXXXXXXXXXXXXXXXX0000000000010202030002020203
ins7e11 = 15
detect = cd
nagra_read = 1
mhz = 500
group = 3
disablecrccws = 1
ndsversion = 2

[reader]
label = freetz-server
protocol = cccam
device = xxx.yyy.zzz,12345
user = user
password = pass
inactivitytimeout = 30
group = 3
disablecrccws = 1
cccversion = 2.3.0
ccckeepalive = 1

Spoiler: oscam log debug level 0

2020/02/21 18:07:40 00000000 s (main) System name = Linux
2020/02/21 18:07:40 00000000 s (main) Host name = dm800sev2
2020/02/21 18:07:40 00000000 s (main) Release = 3.2-dm800sev2
2020/02/21 18:07:40 00000000 s (main) Version = #1 SMP Sat Mar 19 23:20:06 CET 2016
2020/02/21 18:07:40 00000000 s (main) Machine = mips
2020/02/21 18:07:40 00000000 s (main) Stb model = dm800sev2
2020/02/21 18:07:40 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 11194
2020/02/21 18:07:40 00000000 s (config) services reloaded: 0 services freed, 13 services loaded, rejected 0
2020/02/21 18:07:40 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2020/02/21 18:07:40 00000000 s (main) signal handling initialized
2020/02/21 18:07:40 00000000 s (config) 3 provid's loaded
2020/02/21 18:07:40 00000000 s (config) 169 service-id's loaded in 5 ms
2020/02/21 18:07:40 00000000 s (reader) SKY_V13_oben [internal] creating thread for device /dev/sci0
2020/02/21 18:07:40 00000000 s (reader) freetz-server [cccam] creating thread for device xxx.yyy.zzz
2020/02/21 18:07:40 00000000 s (main) waiting for local card init
2020/02/21 18:07:40 XXXXXXXX r (reader) SKY_V13_oben [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2020/02/21 18:07:40 XXXXXXXX r (reader) SKY_V13_oben [internal] Reader sci internal, detected box type: dm800sev2
2020/02/21 18:07:40 XXXXXXXX p (reader) xxx.yyy.zzz: resolved ip=0.0.0.0
2020/02/21 18:07:40 XXXXXXXX p (reader) freetz-server [cccam] connecting to xxx.yyy.zzz:12345
2020/02/21 18:07:40 XXXXXXXX h (webif) webif: decompressed 171635 bytes back into 426384 bytes
2020/02/21 18:07:40 XXXXXXXX h (webif) HTTP Server running. ip=0.0.0.0 port=XX
2020/02/21 18:07:40 XXXXXXXX p (reader) freetz-server [cccam] proxy initialized, server xxx.yyy.zzz:12345
2020/02/21 18:07:41 XXXXXXXX r (reader) SKY_V13_oben [internal] card detected
2020/02/21 18:07:42 XXXXXXXX r (reader) SKY_V13_oben [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2020/02/21 18:07:45 XXXXXXXX r (reader) SKY_V13_oben [internal] Warning: needed try nr 2, next ECM has some delay
2020/02/21 18:07:45 XXXXXXXX r (reader) SKY_V13_oben [internal] card system not supported
2020/02/21 18:07:45 XXXXXXXX r (reader) SKY_V13_oben [internal] Normal mode failed, reverting to Deprecated Mode
2020/02/21 18:07:47 XXXXXXXX r (reader) SKY_V13_oben [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2020/02/21 18:07:49 XXXXXXXX r (reader) SKY_V13_oben [internal] Warning: needed try nr 2, next ECM has some delay
2020/02/21 18:07:50 XXXXXXXX r (reader) SKY_V13_oben [internal] card system not supported
2020/02/21 18:07:50 XXXXXXXX r (reader) SKY_V13_oben [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2020/02/21 18:07:50 XXXXXXXX r (reader) SKY_V13_oben [internal] card initializing error
2020/02/21 18:07:51 00000000 s (main) init for all local cards done

 

[filius00]

nagra_read = 1

Was soll das denn?
Raus damit!
Ebenso MHz Angaben weg und Autospeed aktivieren, dann Oscam erneut starten!

 

[parasonic]

Probier mal im lokalen Reader mit „mhz=357“ ob er sie dann liest.
EDIT: oder Autospeed wie filius meint. Und ja, nagra hat da auch nix verloren.

 

[manchuu]

Was soll das denn?
Raus damit!
Ebenso MHz Angaben weg und Autospeed aktivieren, dann Oscam erneut starten!

Nach Änderung leider immer noch die gleiche Ausgabe mit "...card initializing error"...

Restliche Config´s wie in Post #24

Spoiler: oscam.server

[reader]
label = SKY_V13_oben
description = sky
protocol = internal
device = /dev/sci0
reconnectdelay = 6000
caid = 09C4
boxid = DXXXXXXA
ins7e = 42XXXXXXXXXXXXXXXXXXXXXX0000000000010202030002020203
ins7e11 = 15
detect = cd
autospeed = 1
group = 3
disablecrccws = 1
ndsversion = 2

[reader]
label = freetz-server
protocol = cccam
device = xxx.yyy.zzz,12345
user = user
password = pass
inactivitytimeout = 30
group = 3
disablecrccws = 1
cccversion = 2.3.0
ccckeepalive = 1

Spoiler: oscam log debug level 0

2020/02/23 21:52:55 00000000 s (main) System name = Linux
2020/02/23 21:52:55 00000000 s (main) Host name = dm800sev2
2020/02/23 21:52:55 00000000 s (main) Release = 3.2-dm800sev2
2020/02/23 21:52:55 00000000 s (main) Version = #1 SMP Sat Mar 19 23:20:06 CET 2016
2020/02/23 21:52:55 00000000 s (main) Machine = mips
2020/02/23 21:52:55 00000000 s (main) Stb model = dm800sev2
2020/02/23 21:52:55 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 10741
2020/02/23 21:52:55 00000000 s (config) services reloaded: 0 services freed, 13 services loaded, rejected 0
2020/02/23 21:52:55 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2020/02/23 21:52:55 00000000 s (main) signal handling initialized
2020/02/23 21:52:55 00000000 s (config) 3 provid's loaded
2020/02/23 21:52:55 00000000 s (config) 169 service-id's loaded in 6 ms
2020/02/23 21:52:55 00000000 s (reader) SKY_V13_oben [internal] creating thread for device /dev/sci0
2020/02/23 21:52:55 00000000 s (reader) freetz-server [cccam] creating thread for device xxx.yyy.zzz
2020/02/23 21:52:55 00000000 s (main) waiting for local card init
2020/02/23 21:52:55 XXXXXXXX r (reader) SKY_V13_oben [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2020/02/23 21:52:55 XXXXXXXX r (reader) SKY_V13_oben [internal] Reader sci internal, detected box type: dm800sev2
2020/02/23 21:52:55 XXXXXXXX p (reader) xxx.yyy.zzz: resolved ip=0.0.0.0
2020/02/23 21:52:55 XXXXXXXX p (reader) freetz-server [cccam] connecting to xxx.yyy.zzz:12345
2020/02/23 21:52:55 XXXXXXXX h (webif) webif: decompressed 171635 bytes back into 426384 bytes
2020/02/23 21:52:55 XXXXXXXX h (webif) HTTP Server running. ip=0.0.0.0 port=XX
2020/02/23 21:52:55 XXXXXXXX p (reader) freetz-server [cccam] proxy initialized, server xxx.yyy.zzz:12345
2020/02/23 21:52:56 00000000 s (main) init for all local cards done
2020/02/23 21:52:56 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2020/02/23 21:52:56 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2020/02/23 21:52:56 00000000 s (anticasc) anti cascading disabled
2020/02/23 21:52:56 XXXXXXXX c (client) plain dvbapi-client granted (dvbapi, au=auto (3 reader))
2020/02/23 21:52:56 XXXXXXXX c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2020/02/23 21:52:56 XXXXXXXX c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
2020/02/23 21:52:56 XXXXXXXX c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 8
2020/02/23 21:54:22 XXXXXXXX r (reader) SKY_V13_oben [internal] card detected
2020/02/23 21:54:23 XXXXXXXX r (reader) SKY_V13_oben [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2020/02/23 21:54:26 XXXXXXXX r (reader) SKY_V13_oben [internal] Warning: needed try nr 2, next ECM has some delay
2020/02/23 21:54:26 XXXXXXXX r (reader) SKY_V13_oben [internal] card system not supported
2020/02/23 21:54:26 XXXXXXXX r (reader) SKY_V13_oben [internal] Normal mode failed, reverting to Deprecated Mode
2020/02/23 21:54:28 XXXXXXXX r (reader) SKY_V13_oben [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2020/02/23 21:54:30 XXXXXXXX r (reader) SKY_V13_oben [internal] Warning: needed try nr 2, next ECM has some delay
2020/02/23 21:54:31 XXXXXXXX r (reader) SKY_V13_oben [internal] card system not supported
2020/02/23 21:54:31 XXXXXXXX r (reader) SKY_V13_oben [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2020/02/23 21:54:31 XXXXXXXX r (reader) SKY_V13_oben [internal] card initializing error

 

[Smiley007]

ins7e11 = 15
ndsversion = 2

lasse diese Einträge doch mal weg und starte die Oscam neu

 

[manchuu]

"ins7e11 = 15" und "ndsversion = 2" sind raus, aber trotzdem gleiche Ausgabe...

Restliche Config´s wie in Post #24

Spoiler: oscam.server

[reader]
label = SKY_V13_oben
description = sky
protocol = internal
device = /dev/sci0
reconnectdelay = 6000
caid = 09C4
boxid = DXXXXXXA
ins7e = 42XXXXXXXXXXXXXXXXXXXXXX0000000000010202030002020203
detect = cd
autospeed = 1
group = 3
disablecrccws = 1
ndsversion = 2

[reader]
label = freetz-server
protocol = cccam
device = xxx.yyy.zzz,12345
user = user
password = pass
inactivitytimeout = 30
group = 3
disablecrccws = 1
cccversion = 2.3.0
ccckeepalive = 1

Spoiler: oscam log debug level 0

2020/02/23 22:57:07 00000000 s (main) System name = Linux
2020/02/23 22:57:07 00000000 s (main) Host name = dm800sev2
2020/02/23 22:57:07 00000000 s (main) Release = 3.2-dm800sev2
2020/02/23 22:57:07 00000000 s (main) Version = #1 SMP Sat Mar 19 23:20:06 CET 2016
2020/02/23 22:57:07 00000000 s (main) Machine = mips
2020/02/23 22:57:07 00000000 s (main) Stb model = dm800sev2
2020/02/23 22:57:07 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 16538
2020/02/23 22:57:07 00000000 s (config) services reloaded: 0 services freed, 13 services loaded, rejected 0
2020/02/23 22:57:07 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2020/02/23 22:57:07 00000000 s (main) signal handling initialized
2020/02/23 22:57:07 00000000 s (config) 3 provid's loaded
2020/02/23 22:57:07 00000000 s (config) 169 service-id's loaded in 6 ms
2020/02/23 22:57:07 00000000 s (reader) SKY_V13_oben [internal] creating thread for device /dev/sci0
2020/02/23 22:57:07 00000000 s (reader) freetz-server [cccam] creating thread for device xxx.yyy.zzz
2020/02/23 22:57:07 00000000 s (main) waiting for local card init
2020/02/23 22:57:07 XXXXXXXX r (reader) SKY_V13_oben [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2020/02/23 22:57:07 XXXXXXXX r (reader) SKY_V13_oben [internal] Reader sci internal, detected box type: dm800sev2
2020/02/23 22:57:07 XXXXXXXX p (reader) xxx.yyy.zzz: resolved ip=0.0.0.0
2020/02/23 22:57:07 XXXXXXXX p (reader) freetz-server [cccam] connecting to xxx.yyy.zzz:12345
2020/02/23 22:57:07 XXXXXXXX h (webif) webif: decompressed 171635 bytes back into 426384 bytes
2020/02/23 22:57:07 XXXXXXXX h (webif) HTTP Server running. ip=0.0.0.0 port=XX
2020/02/23 22:57:07 XXXXXXXX p (reader) freetz-server [cccam] proxy initialized, server xxx.yyy.zzz:12345
2020/02/23 22:57:08 XXXXXXXX r (reader) SKY_V13_oben [internal] card detected
2020/02/23 22:57:10 XXXXXXXX r (reader) SKY_V13_oben [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2020/02/23 22:57:12 XXXXXXXX r (reader) SKY_V13_oben [internal] Warning: needed try nr 2, next ECM has some delay
2020/02/23 22:57:13 XXXXXXXX r (reader) SKY_V13_oben [internal] card system not supported
2020/02/23 22:57:13 XXXXXXXX r (reader) SKY_V13_oben [internal] Normal mode failed, reverting to Deprecated Mode
2020/02/23 22:57:14 XXXXXXXX r (reader) SKY_V13_oben [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2020/02/23 22:57:17 XXXXXXXX r (reader) SKY_V13_oben [internal] Warning: needed try nr 2, next ECM has some delay
2020/02/23 22:57:17 XXXXXXXX r (reader) SKY_V13_oben [internal] card system not supported
2020/02/23 22:57:17 XXXXXXXX r (reader) SKY_V13_oben [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2020/02/23 22:57:17 XXXXXXXX r (reader) SKY_V13_oben [internal] card initializing error
2020/02/23 22:57:18 00000000 s (main) init for all local cards done
2020/02/23 22:57:18 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2020/02/23 22:57:18 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2020/02/23 22:57:18 00000000 s (anticasc) anti cascading disabled
2020/02/23 22:57:18 XXXXXXXX c (client) plain dvbapi-client granted (dvbapi, au=auto (3 reader))
2020/02/23 22:57:18 XXXXXXXX c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2020/02/23 22:57:18 XXXXXXXX c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
2020/02/23 22:57:18 XXXXXXXX c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 8

 

[Smiley007]

Dream 800se

hat die Box einen zweiten internen Kartenleser?

wenn ja, ändere:
device = /dev/sci0

zu:
device = /dev/sci01

schiebe die Karte in den zweiten Slot und starte die Oscam neu