Oscam + ORFICE Karte + Austriasat - Funktioniert nicht

[nil_el]

Hey Leute, habe eine dreambox 800 HD, ne ORFIce Karte und OSCAM.
Leider bleiben bei mir ORF-Sender + AustriaSAT Sender alle schwarz.
Die ORF-Karte ist aktiviert.

Meine Konfigs:


OSCAM.SERVER:

Spoiler

[reader]
label = ServerReader
enable = 1
protocol = internal
device = /dev/sci0
caid = 1702,1833,0D05,0D95
boxid = 12345678
detect = CD
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2




[reader]
label = orfreader
enable = 1
protocol = internal
device = /dev/sci1
caid = 0648
boxid = 12345678
rsakey = DFxxxxx2D
force_irdeto = 1
boxkey = 1122334455667788
ecmwhitelist = 0648:3C,4C,44
detect = cd
mhz = 600
cardmhz = 600
ident = 0648:000000,000003,000002
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
dropbadcws = 1
audisabled = 1

oscam.conf:

Spoiler

[global]
netprio=1
logfile = /tmp/oscam.log
maxlogsize = 2000
cachedelay = 120
nice = -1
preferlocalcards = 1
dropdups=1


[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local




[cccam]
port = 64000
reshare = 1
version = 2.3.0
keepconnected = 1
stealth = 1


[monitor]
appendchaninfo=1


[webif]
httpport = 2002
httphelplang = de
httpuser = root
httppwd = dreambox
httpallowed = 0.0.0.0-255.255.255.255

oscam.services:

Spoiler

[HDPlus]
caid = 1830,1843
srvid = 1519,151A,2E9B,5273,5274,EF10,EF11,EF14,EF15,EF74, EF75,EF76,EF77,157F #Sender die gesehen werden können (alle von HD+)


[SkyGermany]
caid = 1702,1833,09C4,098C
provid = 000000,000001,000002,000003
srvid=0083,000A,000B,002B,006B,0029,006A,007A,007B ,007D,007E,007F,0009,0008 ,0017,0014,0015,0204,0021,0203,0023,4462,0075,007C ,0010 ,0025,0024,002A,0032,001B,001D,2EFE,4461,0026,0016 ,0034,0081,0072,0069,0035,006C,003B,0084,79E0,0037 ,0077,3331,00A8,0011,00DD,00DE,00FD,014D,0143,0139 ,012F,0125,011B,0107,0111,016B,0175,0106,0110,011A ,0124,012E,0138,0142,014C,0156,0160,00FC,00DF,0070 ,000D,0076,000C,0082,000E,0071,003A,0039,6FFF,7001 ,6FF1,0206,0018,0074,0022,006F,0019,001C,001A,0027 ,0038,0013,700A,07FF,006E,0080 #Sender die gesehen werden können (alle außer Sky Select und HD+)


[SkyGermanyMitHDPlus]
caid = 1702,1833,09C4,098C,1830,1843
provid = 000000,000001,000002,000003
srvid=0083,000A,000B,002B,006B,0029,006A,007A,007B ,007D,007E,007F,0009,0008 ,0017,0014,0015,0204,0021,0203,0023,4462,0075,007C ,0010 ,0025,0024,002A,0032,001B,001D,2EFE,4461,0026,0016 ,0034,0081,0072,0069,0035,006C,003B,0084,79E0,0037 ,0077,3331,00A8,0011,00DD,00DE,00FD,014D,0143,0139 ,012F,0125,011B,0107,0111,016B,0175,0106,0110,011A ,0124,012E,0138,0142,014C,0156,0160,00FC,00DF,0070 ,000D,0076,000C,0082,000E,0071,003A,0039,6FFF,7001 ,6FF1,0206,0018,0074,0022,006F,0019,001C,001A,0027 ,0038,0013,700A,07FF,006E,1519,151A,2E9A,5273,5274 ,EF10,EF11,EF14,EF15,EF74, EF75,EF76,EF77,157F,0080


[skyall]
caid = 1702,1833
srvid = 0008,0009,000A,000B,000C,000D,000E,0010,0011,0012, 0013,0014,0015,0016,0017,0018,0019,001A,001B,001C, 001D,0021,0022,0023,0024,0025,0026,0027,0029,002A, 002B,0032,0034,0035,0037,0038,0039,003A,003B,003C, 003D,003E,003F,0040,0041,0042,0043,0044,0045,0046, 0075,0077,0078,0079,007A,007B,007C,007D,007E,007F, 0080,0081,0082,0083,0084,0096,0097,0098,0099,009A, 009B,009C,00A8,00DD,00DE,00DF,00FB,00FC,00FD,00FE, 0105,0106,0107,0108,010F,0110,0111,0119,011A,011B, 0123,0124,0125,012D,012E,012F,0137,0138,0139,0141, 0142,0143,014B,014C,014D,0156,0159,0160,0163,016B, 016D,0175,0201,0203,0204,0206,07FF,2EFE,3331,4461, 4462,6FF1,7001,7009,700A,0071,006A,006B,0072,0070, 0069,006F,007C,0076


[skyfullhd]
caid = 1702,1833
provid = 000000
srvid = 000C,000D,000E,0010,0013,0015,0016,0017,0018,001A, 001B,001C,001D,0022,0024,002A,0032,0034,00A8,0206, 0008,0009,000A,000B,0014,0019,0029,002B,0203,0204, 006A,006B,006F,0070,0071,0072,0075,0077,0081,0082, 0083,0084,0078,0069,00DF,0106,0110,011A,0124,012E, 0138,0142,014C,0156,0160,00FC,0011,0035,00DD,00DE, 00FD,0107,0111,011B,0125,012F,0139,0143,014D,016B, 0175,0075,000F,003B,0046,0021,0023,0026,0038,003A, 3331,3335,0027,0037,0039,6FF1,7001,7009,700A,4461, 4462,0025,07FF,2EFE,0012,00FB,00FE,0105,0108,010F, 0119,0123,012D,0137,0141,014B,0078,0201,0159,0163, 016D,0079,0079,0096,0097,0098,0099,009A,009B,009C




[skywelt]
caid = 1702
provid = 000000
srvid = 002A,0018,000E,0022,001A,001C,0010,0206,0016,0013,00A8,000C,000D,001D,001B,0017,0011,0034,0024,0032,0038,0027,3331,0037,003A,0021,7001,700A,0026,0039,0023,07FF,0025,4462,2EFE,4461


[skywelthd]
caid = 1702,1833
provid = 000000
srvid = 0082,0074,0084,007C,0071,0076,0070,006C,6FB8,007B,007D,007F,007E,0080


[skyfilm]
caid = 1702
provid = 000000
srvid = 0019,0203,0009,000A,000B,002B,0008,0014,0029,0204


[skyfilmhd]
caid = 1702,1833
provid = 000000
srvid = 006F,006A,0083,006B,006E,0073


[sky3d]
caid = 1702,1833,09C4,098C
provid = 000000
srvid = 0075


[skyfußballbundesliga]
caid = 1702
provid = 000000
srvid = 00DF,0106,0110,011A,0124,012E,0138,0142,014C,00FC


[skyfußballbundesligahd]
caid = 1702,1833
provid = 000000
srvid = 0077,0081,0072,0069,007A


[skyTEST]
caid=1702,1833,1722,1834,09C4
srvid=3786,378F,378D,4F62,4F55,32DD,32DE,23F1,26B1 ,26C5,0084,0081,0083,0082,000F,000A,0001,000B,002b ,0009,0029,001b,002a,000e,0044,003e,18b2,000d,000C ,0034,0017,0008,0204,0014,0024,0032,4462,4461,003c,0298,0043,0010,0206,0016,0203,003f,001d,3397,3398 ,0045,0018,0042,0022,0019,001a,700a,001c,0013,3393 ,3394,003d,6ff1,00df,0011,00dd,00de,00fd,014d,0143,0139,012f,0125,011b,0107,0111,016b,0175,0035,3331 ,00a8,3395,7009,6fff,0015,0201,0159,0163,016d,0046 ,00fb,0105,010f,0119,0123,012d,0137,0141,014b,0106 ,0110,011a,0124,012e,0138,0142,014c,0156,0160,00fc,0096,0097,0098,0099,009A,009B,009C,6FF3,6FEE,6FEF,6FF1,6FF0,6FFF,4F62,4F55,0d02,0080,007f,4285,3786,3788,1251,0086,0082,21B8,378F,378D,378C,36B4,36B6 ,36B3,36B7,36B5,36B2,36B1,36B8,3792,0d02,35C0,378A,36B3,36B2,36B8,36B9,0385,038B,03DE,0045,001B,003F,6FF1,6FEE,6FEF,003D,003E,0042,001D,3391,3392,3393,3394,3395,3396,3397,3398,3399,339A,339C,4461,4462,3335,4F7C,0046,0040,0041,2EFE,07FF,006F,0070,0071,0072,006B,006A,0069


[skysport]
caid = 1702
provid = 000000
srvid = 00DD,00DE,0107,0111,011B,0125,012F.0139,0143,014D,00FD


[skysportaustria]
caid = 1702
provid = 000000
srvid = 001E


[skyselecthd]
caid = 1702,1833
provid = 000000
srvid = 0012,0078,00FB,0105,010F,0119,0123,012D,0137,0141,014B,014E,00FE


[skyerotik]
caid = 1702
provid = 000000
srvid = 0015,0201,0159,0163,016D,0079


[skyorf]
caid = 1702
provid = 000000
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,332D


[orfcw]
caid = 0D05,0D95
provid = 000000,000004
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,332D


[orfice]
caid = 0648
provid = 000000
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,332D


[plusaustria]
caid = 0D95
provid = 000000,000004,000010
srvid = 003E,003B,07FF,2EFE,4461,4462,6FEE,6FEF,6FF0,6FF3,6FFF,14B4,14B5,14B6,14B7,0025




[kombiaustria]
caid = 0648
provid = 000000
srvid = 14B7,14B4,2E87,2EA5,14B5,2E91,14B6,527E,527D,2B01,4461,4462,0025,07FF,2EFE,6FEF,6FF3,6FEE,6FFF,6FF0,003B,152D,3251,3252,3253






[orf]
caid=0648
provid=000000
srvid=132F,1330,3332,32C9,32CA,32CB,32CC,32CD,32CE ,32CF,32D0 ,32D1,32D2,32D3,32D4,4E27


[austriasat]
caid = 0D05,0D95
provid = 000000,000004,000010
srvid = 0025,003B,0046,07FA,07FF,14B4,14B5,14B6,14B7,2EFE, 07FC,31FC,4461,4462,6FEE,6FEF,6FF0,6FF3,6FFF


[austriasat_0648]
caid = 0648
provid = 000000
srvid = 0025,003B,003E,0045,0046,07FA,07FD,07FF,2EFE,4461, 4462,6FEE,6FEF,6FF0,6FF3,6FFF,07FD,07FC,2B01,2B33, 3251,3252,3253


[hdaustria]
caid = 0648
provid = 000000
srvid = 14B4,14B5,14B6,14B7,EF10,EF11,EF15,5273,5274

Log:

Spoiler

2013/08/07 16:46:30 5BF518 h HTTP Server listening on port 2002
2013/08/07 16:46:30 5C4028 r orfreader [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=600, cardmhz=600)
2013/08/07 16:46:31 5C4028 r orfreader [internal] card detected
2013/08/07 16:46:32 5C4028 r orfreader [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2013/08/07 16:46:32 5C4028 r orfreader [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
2013/08/07 16:46:32 5C4028 r orfreader [internal] Setting baudrate to 32258 bps
2013/08/07 16:46:32 5C4028 r orfreader [internal] Calculated work ETU is 31.00 us
2013/08/07 16:46:32 5C4028 r orfreader [internal] ATR Fsmax is: 5 Mhz, clocking card to 6.00
2013/08/07 16:46:33 5C4028 r orfreader [internal] Hist. Bytes: TÄă
2013/08/07 16:46:33 5C4028 r orfreader [internal] detect irdeto card
2013/08/07 16:46:33 5C4028 r orfreader [internal] WARNING: ACS57 card can require the CamKey from config
2013/08/07 16:46:33 5C4028 r orfreader [internal] caid: 0648, acs: 6.08, country code: AUT
2013/08/07 16:46:33 5C4028 r orfreader [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2013/08/07 16:46:33 5C4028 r orfreader [internal] You have a bad Cam Key set
2013/08/07 16:46:33 5C4028 r orfreader [internal] card detected
2013/08/07 16:46:33 5C4028 r orfreader [internal] type: CryptoWorks
2013/08/07 16:46:33 5C4028 r orfreader [internal] type: CryptoWorks, caid: 0D95, ascii serial: #########, hex serial: ##########
2013/08/07 16:46:33 5C4028 r orfreader [internal] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F20
2013/08/07 16:46:33 5C4028 r orfreader [internal] providers: 4 (04,08,0C,10)
2013/08/07 16:46:33 5C4028 r orfreader [internal] found card system cryptoworks
2013/08/07 16:46:33 5C4028 r orfreader [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2013/08/07 16:46:34 5C4028 r orfreader [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2013/08/07 16:46:34 5C4028 r orfreader [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2013/08/07 16:46:34 5C4028 r orfreader [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2013/08/07 16:46:34 5C4028 r orfreader [cryptoworks] ready for requests
2013/08/07 16:46:34 0 s init for all local cards done
2013/08/07 16:46:34 0 s anti cascading disabled
2013/08/07 16:46:34 5CBD20 c plain dvbapi-client granted (local, au=auto (2 reader))
2013/08/07 16:46:34 5CBD20 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
2013/08/07 16:46:35 5CBD20 c dvbapi: [ADD PID 0] CAID: 0D05 ECM_PID: 00C9 PROVID: 000000
2013/08/07 16:46:35 5CBD20 c dvbapi: [ADD PID 1] CAID: 0D95 ECM_PID: 00FB PROVID: 000000
2013/08/07 16:46:35 5CBD20 c dvbapi: [ADD PID 2] CAID: 0648 ECM_PID: 0065 PROVID: 000000
2013/08/07 16:46:35 5CBD20 c dvbapi: [ADD PID 3] CAID: 1702 ECM_PID: 012D PROVID: 000000
2013/08/07 16:46:35 5CBD20 c dvbapi: [ADD PID 4] CAID: 1833 ECM_PID: 0191 PROVID: 000000
2013/08/07 16:46:35 5CBD20 c dvbapi: [ADD PID 5] CAID: 09C4 ECM_PID: 01E1 PROVID: 000000
2013/08/07 16:46:35 5CBD20 c dvbapi: [ADD PID 6] CAID: 098C ECM_PID: 01EB PROVID: 000000
2013/08/07 16:46:35 5CBD20 c dvbapi: [ADD PID 7] CAID: 0D98 ECM_PID: 00FD PROVID: 000000
2013/08/07 16:46:35 5CBD20 c dvbapi: [ADD PID 8] CAID: 0650 ECM_PID: 0067 PROVID: 000000
2013/08/07 16:46:35 5CBD20 c dvbapi: Found 9 ECMpids and 6 STREAMpids in PMT
2013/08/07 16:46:35 5CBD20 c dvbapi: New program number: 32C9 (0D05:32C9 unknown) [pmt_list_management 3]
2013/08/07 16:46:35 5CBD20 c dvbapi: ERROR: Can't decode channel

Kann mir bitte jmd weiterhelfen?

P.S: Hab auch noch ne Sky Karte weche für den oberen Slot konfiguriert ist und super funktioniert. Hab hier jetzt nur mit der ORFIce Karte im unteren Slot getestet weil ich schauen wollte ob ich das zum laufen kriege


Vielen Dank schonmal

Du musst angemeldet sein, um Bilder zu sehen.

 

[painkilla]

AW: Oscam + ORFICE Karte + Austriasat - Funktioniert nicht

Servus!

Ich kann dir leider nicht helfen, jedoch habe ich genau das selbe Problem. Ich verwende seit 4 Jahren OSCAM mit meiner orf Karte. Jetzt habe ich die neue (ice?) Karte bekommen und es geht nix mehr....

Das Tutorial hier hab ich schon durchgekaut, geht aber irgendwie need...

 

[vyth]

AW: Oscam + ORFICE Karte + Austriasat - Funktioniert nicht

deine karte wird auch im cryptoworks modus eingelesen... so stehts mal im log..

kann es sein, dass du ein zu altes oscam hast???

 

[4gx35]

AW: Oscam + ORFICE Karte + Austriasat - Funktioniert nicht

Link ist nicht mehr aktiv.
dann Link ist nicht mehr aktiv.

 

[joopastron]

AW: Oscam + ORFICE Karte + Austriasat - Funktioniert nicht

Teste mal bitte so

[reader]
label = ORF
protocol = internal
device = /dev/sci1
caid = 0648
boxkey = 1122334455667788
rsakey = DF*********12D
force_irdeto = 1
detect = cd
mhz = 600
cardmhz = 357
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
deprecated = 1

 

[painkilla]

AW: Oscam + ORFICE Karte + Austriasat - Funktioniert nicht

Hier sind meine logs und Datein:

log wenn ich orf 3 schauen will:
2013/08/08 11:50:41 15DB160 c server (0D95&000004/0000/332D/B8:45DxxxxxAD85A76D0): not found (145 ms) by orf - ORF3
2013/08/08 11:50:41 15DB160 c server (0D95&000004/0000/332D/B8:45DxxxxxxD85A76D0): not found (0 ms) by orf - ORF3

Init scheint auch ok zu sein:
2013/08/08 11:51:47 15D2C20 r orf [smartreader] Reader initialized (device=Serial:Reader B8C19B3, detect=cd, mhz=500, cardmhz=500)
2013/08/08 11:51:48 15D2C20 r orf [smartreader] card detected
2013/08/08 11:51:49 15D2C20 r orf [smartreader] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2013/08/08 11:51:49 15D2C20 r orf [smartreader] Init card protocol T0, FI=1, F=372, D=2, N=0
2013/08/08 11:51:49 15D2C20 r orf [smartreader] Calculated work ETU is 37.20 us
2013/08/08 11:51:49 15D2C20 r orf [smartreader] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 4.80 MHz (specified in reader->mhz)
2013/08/08 11:51:50 15D2C20 r orf [smartreader] card detected
2013/08/08 11:51:50 15D2C20 r orf [smartreader] type: CryptoWorks
2013/08/08 11:51:51 15D2C20 r orf [smartreader] type: CryptoWorks, caid: 0D95, ascii serial: #########, hex serial: ##########
2013/08/08 11:51:51 15D2C20 r orf [smartreader] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2013/08/08 11:51:51 15D2C20 r orf [smartreader] providers: 4 (04,08,0C,10)
2013/08/08 11:51:51 15D2C20 r orf [smartreader] found card system cryptoworks
2013/08/08 11:51:51 15D2C20 r orf [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2013/08/08 11:51:51 15D2C20 r orf [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2013/08/08 11:51:51 15D2C20 r orf [cryptoworks] chid: 001D, date: 2013/08/08 - 2013/11/08, name: Product 001D
2013/08/08 11:51:51 15D2C20 r orf [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2013/08/08 11:51:52 15D2C20 r orf [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2013/08/08 11:51:52 15D2C20 r orf [cryptoworks] ready for requests

Ich kann die Karte anscheinend nur in cryptoworks laufen lassen. Der Force command scheint bei mir need zu funktionieren, oder ich hab ihn falsch gesetzt.
Rechts oben sagt mir die Karte, dass die auf 0d95:000008 ein entitelment hat. Also hab ich die files darauf angepasst.

Spoiler

[global]
usrfile = /var/log/oscamsuser.log
logfile = /var/log/oscam.log
cachedelay = 120
nice = -1
saveinithistory = 1

[monitor]
hideclient_to = 15
appendchaninfo = 0

[newcamd]
port = 15000@0d95:000008,00000C,000010,000004

Spoiler

[account]
user = server
pwd = server
au = 1
group = 1
services = orf_crypto_ice

Spoiler

[reader]
label = orf
enable = 1
protocol = smartreader
device = Serial:Reader B8C19B3
services = orf_crypto_ice
detect = cd
group = 1
mhz = 500
cardmhz = 500
ident = 0d95:000004,000008,00000C,000010
emmcache = 1,3,2
blockemm-unknown = 1

Spoiler

[orf_crypto_ice]
caid = 0D95
provid = 000004,000008,00000C,000010
srvid = 32C9,132F,32CA,1330,32CB,32CC,32CD,32D0,32D1,32D2, 32D3,332D,33A5,4E27,32D4,33A7

Spoiler

0D95,0D05,0648,1702,1833,098C,09C4:132F|ORF|ORF1 HD|TV|
0D95,0D05,0648,1702,1833,098C,09C4:1330|ORF|ORF2 HD|TV|
0D95,0D05,0648,1702,1833,098C,09C4:32C9|ORF|ORF1|T V|
0D95,0D05,0648,1702,1833,098C,09C4:32CA|ORF|ORF2|T V|
0D95,0D05,0648,1702,1833,098C,09C4:32CB|ORF|ORF2 W|TV|
0D95,0D05,0648,1702,1833,098C,09C4:32CC|ORF|ORF2 N|TV|
0D95,0D05,0648,1702,1833,098C,09C4:32CD|ORF|ORF2 B|TV|
0D95,0D05,0648,1702,1833,098C,09C4:32CE|ORF|ORF2 O|TV|
0D95,0D05,0648,1702,1833,098C,09C4:32CF|ORF|ORF2 S|TV|
0D95,0D05,0648,1702,1833,098C,09C4:32D0|ORF|ORF2 T|TV|
0D95,0D05,0648,1702,1833,098C,09C4:32D1|ORF|ORF2 V|TV|
0D95,0D05,0648,1702,1833,098C,09C4:32D2|ORF|ORF2 St|TV|
0D95,0D05,0648,1702,1833,098C,09C4:32D3|ORF|ORF2 K|TV|
0D95,0D05,0648,1702,1833,098C,09C4:332D|ORF|ORF3|T V|
0D95,0D05,0648,1702,1833,098C,09C4:33A5|ORF|ORF SPORT+|TV|
0D95,0D05,0648,1702,1833,098C,09C4:32D4|ORF|ATV|TV |
0D95,0D05,0648,1702,1833,098C,09C4:33A7|ORF|ATV2|T V|
0D95,0D05,0648,1702,1833,098C,09C4:4E27|ORF|PulsTV Austria|TV|

Was mach ich da falsch???

 

[4gx35]

AW: Oscam + ORFICE Karte + Austriasat - Funktioniert nicht

du brauchst rsa und boxkey beim reader,
vielleicht solltest du auch alles mit oscam allein ohne newcamd machen,
Link ist nicht mehr aktiv.

 

[painkilla]

Ich brauche die Verbindung für den VDR, damit der mir das Signal entschlüsseln kann. Als reader habe ich einen Smargo reader. Bis jetzt hat es auch ohne rsa und boxkey funktioniert.
Irgendwie komisch:wacko1:

Ich habe jetzt den rsa und boxkey eingefügt, und bekomme die Karte in den Irdeto modus! Derzeit habe ich 2 Entitlements:
[TABLE="class: stats"]
[TR="class: e_valid"]
[TD]chid[/TD]
[TD]0648[/TD]
[TD]44C0FF[/TD]
[TD]0000000000007FF7[/TD]
[TD]00000000[/TD]
[TD]2013-08-08[/TD]
[TD]2013-08-18[/TD]
[TD]ORF-ICE ORF Digital[/TD]
[/TR]
[TR="class: e_valid"]
[TD]chid[/TD]
[TD]0648[/TD]
[TD]002500[/TD]
[TD]000000000000001D[/TD]
[TD]00000000[/TD]
[TD]2013-08-08[/TD]
[TD]2013-11-08[/TD]
[TD]0648:002500 unknown[/TD]
[/TR]
[/TABLE]

Ich versteh nicht warum die provid nicht 000000 ist, sondern 44..FF und 002500 ???
sind die neu?
Weil ich habe unter den oscam.service

[orfice]
caid = 0648
provid = 000000
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,33AC,332D

Hier ist noch ein log auszug:
2013/08/08 13:15:30 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r0 (x86_64-suse-linux-libusb)
2013/08/08 13:15:30 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 7853
2013/08/08 13:15:30 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2013/08/08 13:15:30 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2013/08/08 13:15:30 0 s signal handling initialized
2013/08/08 13:15:30 0 s 18 service-id's loaded in 0ms
2013/08/08 13:15:30 0 s 28 tier-id's loaded
2013/08/08 13:15:30 0 s 13 provid's loaded
2013/08/08 13:15:30 0 s newcamd: initialized (fd=6, port=15000)
2013/08/08 13:15:30 0 s -> CAID: 0648 PROVID: 000000, 000001, 000002, 000003, 000004
2013/08/08 13:15:30 0 s orfice [smartreader] creating thread for device Serial:Reader B8C19B3
2013/08/08 13:15:30 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/08/08 13:15:30 0 s waiting for local card init
2013/08/08 13:15:30 15D2BA0 r orfice [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/08/08 13:15:30 B00008C0 h webif: decompressed 53294 bytes back into 153440 bytes
2013/08/08 13:15:30 B00008C0 h HTTP Server running. ip=0.0.0.0 port=19042
2013/08/08 13:15:30 15D2BA0 r Found reader with serial Reader B8C19B3 at 007:002
2013/08/08 13:15:30 15D2BA0 r Found smartreader device Serial:Reader B8C19B3
2013/08/08 13:15:30 15D2BA0 r orfice [smartreader] Reader initialized (device=Serial:Reader B8C19B3, detect=cd, mhz=600, cardmhz=600)
2013/08/08 13:15:31 15D2BA0 r orfice [smartreader] card detected
2013/08/08 13:15:33 15D2BA0 r orfice [smartreader] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2013/08/08 13:15:33 15D2BA0 r orfice [smartreader] Init card protocol T0, FI=1, F=372, D=2, N=0
2013/08/08 13:15:33 15D2BA0 r orfice [smartreader] Calculated work ETU is 31.00 us
2013/08/08 13:15:33 15D2BA0 r orfice [smartreader] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz)
2013/08/08 13:15:34 15D2BA0 r orfice [smartreader] Hist. Bytes: TÄ
2013/08/08 13:15:34 15D2BA0 r orfice [smartreader] detect irdeto card
2013/08/08 13:15:34 15D2BA0 r orfice [smartreader] caid: 0648, acs: 0.05, country code: AUT
2013/08/08 13:15:34 15D2BA0 r orfice [smartreader] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2013/08/08 13:15:35 15D2BA0 r orfice [smartreader] active providers: 4 (44c0ff,002500,002600,002700)
2013/08/08 13:15:35 15D2BA0 r orfice [smartreader] found card system irdeto
2013/08/08 13:15:35 15D2BA0 r orfice [irdeto] entitlements for provider: 1, id: 44C0FF
2013/08/08 13:15:35 15D2BA0 r orfice [irdeto] chid: 7FF7, date: 2013/08/08 - 2013/08/18
2013/08/08 13:15:35 15D2BA0 r orfice [irdeto] entitlements for provider: 2, id: 002500
2013/08/08 13:15:35 15D2BA0 r orfice [irdeto] chid: 001D, date: 2013/08/08 - 2013/11/08
2013/08/08 13:15:35 15D2BA0 r orfice [irdeto] ready for requests
2013/08/08 13:15:36 0 s init for all local cards done
2013/08/08 13:15:36 0 s anti cascading disabled



active providers: 4 (44c0ff,002500,002600,002700) ???????

 

[4gx35]

AW: Oscam + ORFICE Karte + Austriasat - Funktioniert nicht

deine oscam ist aber schon länger nicht mehr wirklich aktuell, unbedingt aktuellere testen (zb aus post #4)

 

[painkilla]

AW: Oscam + ORFICE Karte + Austriasat - Funktioniert nicht

Ich hab den server vor 2 Wochen neu aufgesetzt. Ich glaub sogar aus dem trunk.

2013/08/08 13:15:30 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r0
Na gut, dann wird mal die Kiste auf Vordermann gebracht und dann rühre ich mich hier mal wieder.

 

[fun7]

AW: Oscam + ORFICE Karte + Austriasat - Funktioniert nicht

deine oscam ist aber schon länger nicht mehr wirklich aktuell, unbedingt aktuellere testen (zb aus post #4)

Was ? r0 ist die Feedrevision von OpenPLI!

 

[4gx35]

AW: Oscam + ORFICE Karte + Austriasat - Funktioniert nicht

war nur eine vermutung, ist nicht hilfreich, wenn die version nicht im log angezeigt wird, steht ja zumindest im webif
infos zum image oder zur dream fehlen leider

 

[painkilla]

AW: Oscam + ORFICE Karte + Austriasat - Funktioniert nicht

Guten Morgen!

Oscam ist jetzt auf der aktuellen svn version 8825.
Die ORF Karte hat jetzt 7!!! Entitlements, wobei sie wie folgt aussehen:

Spoiler

[TABLE="class: stats"]
[TR]
[TH="colspan: 3"]Cardsystem[/TH]
[TH="colspan: 2"]Valid To[/TH]
[TH]IRD ID (nagra)[/TH]
[TH="colspan: 2"]Provider[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 3"]irdeto[/TD]
[TD="colspan: 2"]n/a[/TD]
[TD]FF FF FF FF[/TD]
[TD="colspan: 2"]00 44 C0 FF (sysid)
01 00 25 00
02 00 26 00
03 00 27 00[/TD]
[/TR]
[TR]
[TH="colspan: 2"]Serial[/TH]
[TH="colspan: 2"]Rom[/TH]
[TH="colspan: 4"]ATR[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 2"]44 C0 17 13 00 00[/TD]
[TD="colspan: 2"][/TD]
[TD="colspan: 4"]3B 78 12 00 00 54 C4 03 00 8F F1 90 00[/TD]
[/TR]
[TR]
[TH]Type[/TH]
[TH]Caid[/TH]
[TH]Provid[/TH]
[TH]ID[/TH]
[TH]Class[/TH]
[TH]Start Date[/TH]
[TH]Expire Date[/TH]
[TH]Name[/TH]
[/TR]
[TR="class: e_valid"]
[TD]chid[/TD]
[TD]0648[/TD]
[TD]44C0FF[/TD]
[TD]0000000000007FF7[/TD]
[TD]00000000[/TD]
[TD]2013-08-09[/TD]
[TD]2013-08-19[/TD]
[TD]ORF-ICE ORF Digital[/TD]
[/TR]
[TR="class: e_valid"]
[TD]chid[/TD]
[TD]0648[/TD]
[TD]44C0FF[/TD]
[TD]0000000000000002[/TD]
[TD]00000000[/TD]
[TD]2013-08-09[/TD]
[TD]2014-04-16[/TD]
[TD]ORF-ICE ATV[/TD]
[/TR]
[TR="class: e_valid"]
[TD]chid[/TD]
[TD]0648[/TD]
[TD]44C0FF[/TD]
[TD]0000000000000001[/TD]
[TD]00000000[/TD]
[TD]2013-08-09[/TD]
[TD]2014-04-16[/TD]
[TD]ORF-ICE ORF[/TD]
[/TR]
[TR="class: e_valid"]
[TD]chid[/TD]
[TD]0648[/TD]
[TD]44C0FF[/TD]
[TD]000000000000FFE0[/TD]
[TD]00000000[/TD]
[TD]2013-08-08[/TD]
[TD]2013-09-07[/TD]
[TD]ORF-ICE ORF Digital[/TD]
[/TR]
[TR="class: e_valid"]
[TD]chid[/TD]
[TD]0648[/TD]
[TD]44C0FF[/TD]
[TD]0000000000007FFB[/TD]
[TD]00000000[/TD]
[TD]2013-08-09[/TD]
[TD]2013-09-08[/TD]
[TD]ORF-ICE ORF Digital[/TD]
[/TR]
[TR="class: e_valid"]
[TD]chid[/TD]
[TD]0648[/TD]
[TD]44C0FF[/TD]
[TD]000000000000FFD8[/TD]
[TD]00000000[/TD]
[TD]2013-08-09[/TD]
[TD]2013-09-08[/TD]
[TD]ORF-ICE ORF Digital[/TD]
[/TR]
[TR="class: e_valid"]
[TD]chid[/TD]
[TD]0648[/TD]
[TD]002500[/TD]
[TD]000000000000001D[/TD]
[TD]00000000[/TD]
[TD]2013-08-08[/TD]
[TD]2013-11-08[/TD]
[TD]0648:002500 unknown[/TD]
[/TR]
[/TABLE]

Mich irritiert die Provid! Die sollte ja eigentlich 000000 sein? oder irre ich mich da?
Meine Restliche conf sieht so aus:

Eigentlich müsste ich ja jetzt die Provid auf 44c0ff ändern, oder täusche ich mich da??

Spoiler

[global]
usrfile = /var/log/oscamsuser.log
logfile = /var/log/oscam.log
cachedelay = 120
nice = -1
saveinithistory = 1

[monitor]
hideclient_to = 15
appendchaninfo = 0

[newcamd]
port = 15000@0648:000000,000001,000002,000003,000004
key = 0102030405060708091011121316
allowed = 127.0.0.1,192.168.178.0-192.168.178.255

Spoiler

[account]
user = server
pwd = server
au = 1
group = 1
services = orfice

Spoiler

[reader]
label = orfice
description = ORF-Ice
protocol = smartreader
device = Serial:Reader B8C19B3
services = orfice
caid = 0648
boxid = 12345678
boxkey = 112xx788
rsakey = DF5xx12D
force_irdeto = 1
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2

Spoiler

[orfice]
caid = 0648
provid = 000000,000001,000002,000003,000004
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,33AC,332D

#############################################################################################################
#############################################################################################################
#############################################################################################################
#############################################################################################################
WICHTIG

ORF hat die Provid geändert!!!!!

Die Kanäle werden hell, die neue Provid ist 44C0FF!!!!!!

danke für eure hilfe!

lg Painkilla