Oscam Only mit MgCamd für ORF Keys!

Stigarta · 26. November 2011

Moin,

ich habe mir ne Oscam-MgCamd Combi gebastelt. Nutze Oscam only 1.20 Build 6038 und MgCamd1.35a.
Ich schaue über eine HD01 und V13, ORF mache ich über die MgCamd auf. Nun habe ich noch
ein paar Fragen und hoffe auf einen Profi der sie beantworten kann.

1. Ist es bei MgCamd wie bei Oscam, wenn eine neue Version rauskommt braucht man nur die bin tauschen
und die Configs bleiben die gleichen?
2. Folgende MgCamd Dateien sind notwendig: mg.cfg und newcamlist? Die bleiben dann bei Versionwechsel
bestehen und man tauscht nur die bin,richtig?
3. MgCamd 1.35a ist die letzte "puplic" Version und alle darüber sind Patches?

Folgende Configs habe ich mir gebastelt, und vieleicht kann mal einer schauen ob sie in Ordnung sind, oder man
noch Finetuning machen kann. HD+/Sky und ORF laufen schon ohne Probleme

Oscam Config

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
logfile = /tmp/oscam.log
maxlogsize = 256
Saveinithistory = 1

[newcamd]
port = 31000@1830:003411;31001@09C4:000000
key = 0102030405060708091011121314

[webif]
HttpPort = 3001
HttpUser = user
HttpPWD = pass
HttpRefresh = 10
HttpAllowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255
Httpdyndns =
HttpReadOnly = 1

Oscam Server

[reader]
label = V13
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 596C3056
detect = cd
group = 1
emmcache = 1,1,15
blockemm-unknown = 1
blockemm-g = 1

[reader]
label = HD01
protocol = internal
device = /dev/sci1
caid = 1830
rsakey =
boxkey =
detect = cd
group = 2
emmcache = 1,1,15
blockemm-unknown = 1
blockemm-g = 1

Oscam.dvbapi (diese habe ich damit die HD+ Programme über die HD01 laufen)

P: 1830 1 # HD+ HD01
P: 09C4 1 # SkyDE V13

Oscam User

[account]
user = et9000
pwd = et9000
group = 1,2
au = 1

Newcamlist

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS_MULTIPLE = 127.0.0.1 31000:31001 et9000 et9000 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

mg.cfg

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E

time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# Mapping 18xx
# 00 disable mapping
# 01 map 18xx to 1801
F: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
B: { 06 }

Oscam Log:

OSCAM 1.20-unstable_svn build #6038

[TABLE="class: menu"]
[TR]
[TD]