Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Oscam für Edision Optimuss OS2+

    Nobody is reading this thread right now.
B

badgoes

Newbie
Registriert
15. Juni 2015
Beiträge
9
Reaktionspunkte
0
Punkte
21
Hallo zusammen,

ich habe bei mir noch eine Oscam 1.20 svn 9449 im Einsatz.
Da aktuelle Oscam Versionen in dem internen Reader nicht klar kommen aufgrund von Treiber Konflikten.
Bin ich auf der Suche nach einer neueren Oscam die noch im Edision Optimuss OS2+ läuft.
Derzeitig wird nur HD+ genutzt.

Versucht hatte ich eine SVN_11326 dort schlägt die Karten Initalisiserung fehl.

Was mich aber noch viel mehr interessieren würde was der Unterschied zwischen der lauffähigen und den neuen Oscam Versionen ist mit dem Umgang des Internen Card Reader ist.
 
Bei Fragen sollte man folgendes mal angeben:
Welches Image ist auf der Box?
Welche HD+ Karte ist im Einsatz
 
Oh sorry vergessen

Derzeitg ist OpenATV 7.4 drauf und eine HD01 mit der alten Oscam am laufen.
Bei neuen Oscam Versionen schlägt die Initalisierung fehl mit "card system not supported" nachdem die MHZ versucht wurden einzustellen.
Mit der alten Oscam läuft es ohne Probleme somit denke ich mal das die Config nicht allzu falsch sein können.

Daher die bitte welche Oscam läuft auf dem Receiver noch stabil die aktueller ist als meine
 
Nimm doch die oscam-master vom Feed. Da gehst Du sicher, das es die richtige ist.
Ansonsten gilt auch hier:
G

Thema 'Wie Poste ich im OScam Bereich richtig'

Hallo Zusammen,

leider kam es in der Vergangenheit immer wieder dazu, dass sich Leute nicht richtig aritkulieren konnten.
Daher möchten wir euch auf diesem Wege mal zeigen, welche Informationen eure Post von Problemen, Fragen etc. enthalten sollten.

Aber bevor ihr hier eine Frage zum x-ten mal postet, schaut doch erst einmal in unseren gut gefüllten OScam Konfigurations Bereich!
Wir arbeiten wirklich fast jeden Tag an neuen How To´s, die wir euch zur Verfügung stellen.

Und wenn deine Frage nicht oder nur teilweise mit den How To´s beantwortet werden kann und du auch mittels der...
 
Anbei einmal die Log mit der 11360
Den Log Auszug der aktuellen vom Feed habe ich nicht mehr.
Dort sah es aber ähnlich aus das bei der Karteninitalisierung mit dem Error quittiert wurde

-------------------------------------------------------------------------------
OSCam << cardserver log switched at Fri Jan 17 15:59:03 2025
Zum Vergrößern anklicken....
Zum Vergrößern anklicken....
-------------------------------------------------------------------------------
2025/01/17 15:59:03 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11360 (mipsel-unknown-linux-gnu-libusb)
2025/01/17 15:59:03 00000000 s (main) System name = Linux
2025/01/17 15:59:03 00000000 s (main) Host name = optimussos2plus
2025/01/17 15:59:03 00000000 s (main) Release = 3.9.7
2025/01/17 15:59:03 00000000 s (main) Version = #1 SMP Thu Nov 20 04:59:03 UTC 2014
2025/01/17 15:59:03 00000000 s (main) Machine = mips
2025/01/17 15:59:03 00000000 s (main) Stb model = dm8000
2025/01/17 15:59:03 00000000 s (main) Stb vumodel = vusolo2
2025/01/17 15:59:03 00000000 s (main) Stb boxtype = dm8000
2025/01/17 15:59:03 00000000 s (main) creating pidfile /var/tmp/oscam-emu.pid with pid 31971
2025/01/17 15:59:03 00000000 s (config) services reloaded: 0 services freed, 61 services loaded, rejected 0
2025/01/17 15:59:03 00000000 s (emu) OSCam-Emu version 738
2025/01/17 15:59:03 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2025/01/17 15:59:03 00000000 s (main) signal handling initialized
2025/01/17 15:59:03 00000000 s (config) 108 provid's loaded
2025/01/17 15:59:03 00000000 s (config) 2 service-id's loaded in 1 ms
2025/01/17 15:59:03 00000000 s (net) cs378x: initialized (fd=5, port=30000)
2025/01/17 15:59:03 00000000 s (reader) hdpluswhite [internal] creating thread for device /dev/sci0
2025/01/17 15:59:03 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2025/01/17 15:59:03 00000000 s (main) waiting for local card init
2025/01/17 15:59:03 23B381B0 r (reader) hdpluswhite [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.68 MHz)
2025/01/17 15:59:03 23B381B0 r (reader) hdpluswhite [internal] Reader sci internal, detected box type: dm8000
2025/01/17 15:59:03 23B381B0 r (reader) hdpluswhite [internal] card detected
2025/01/17 15:59:03 2501194B h (webif) webif: decompressed 177767 bytes back into 437496 bytes
2025/01/17 15:59:03 2501194B h (webif) HTTP Server running. ip=0.0.0.0 port=83
2025/01/17 15:59:04 23B381B0 r (reader) hdpluswhite [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2025/01/17 15:59:04 23B381B0 r (reader) hdpluswhite [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2025/01/17 15:59:04 23B381B0 r (reader) hdpluswhite [internal] Calculated work ETU is 8.31 us reader mhz = 385
2025/01/17 15:59:04 23B381B0 r (reader) hdpluswhite [internal] Buffers readed 0 bytes total time_us 47
2025/01/17 15:59:04 23B381B0 r (reader) hdpluswhite [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->mhz)
2025/01/17 15:59:05 23B381B0 r (reader) hdpluswhite [internal] Warning: Card returned error on setting ifsd value to 251
2025/01/17 15:59:06 23B381B0 r (reader) hdpluswhite [internal] detect native nagra card
2025/01/17 15:59:08 23B381B0 r (reader) hdpluswhite [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2025/01/17 15:59:09 23B381B0 r (reader) hdpluswhite [internal] T1 Resync command error, trying to reactivate!
2025/01/17 15:59:10 23B381B0 r (reader) hdpluswhite [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2025/01/17 15:59:10 23B381B0 r (reader) hdpluswhite [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2025/01/17 15:59:10 23B381B0 r (reader) hdpluswhite [internal] Calculated work ETU is 8.31 us reader mhz = 385
2025/01/17 15:59:10 23B381B0 r (reader) hdpluswhite [internal] Buffers readed 0 bytes total time_us 77
2025/01/17 15:59:10 23B381B0 r (reader) hdpluswhite [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->mhz)
2025/01/17 15:59:11 23B381B0 r (reader) hdpluswhite [internal] Warning: Card returned error on setting ifsd value to 251
2025/01/17 15:59:13 23B381B0 r (reader) hdpluswhite [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2025/01/17 15:59:14 23B381B0 r (reader) hdpluswhite [internal] T1 Resync command error, trying to reactivate!
2025/01/17 15:59:15 23B381B0 r (reader) hdpluswhite [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2025/01/17 15:59:15 23B381B0 r (reader) hdpluswhite [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2025/01/17 15:59:15 23B381B0 r (reader) hdpluswhite [internal] Calculated work ETU is 8.31 us reader mhz = 385
2025/01/17 15:59:15 23B381B0 r (reader) hdpluswhite [internal] Buffers readed 0 bytes total time_us 52
2025/01/17 15:59:15 23B381B0 r (reader) hdpluswhite [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->mhz)
2025/01/17 15:59:16 23B381B0 r (reader) hdpluswhite [internal] Warning: Card returned error on setting ifsd value to 251
2025/01/17 15:59:16 23B381B0 r (reader) hdpluswhite [internal] card system not supported
2025/01/17 15:59:16 23B381B0 r (reader) hdpluswhite [internal] Normal mode failed, reverting to Deprecated Mode
2025/01/17 15:59:17 23B381B0 r (reader) hdpluswhite [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2025/01/17 15:59:17 23B381B0 r (reader) hdpluswhite [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2025/01/17 15:59:17 23B381B0 r (reader) hdpluswhite [internal] Calculated work ETU is 110.39 us reader mhz = 337
2025/01/17 15:59:17 23B381B0 r (reader) hdpluswhite [internal] Buffers readed 0 bytes total time_us 48
2025/01/17 15:59:18 23B381B0 r (reader) hdpluswhite [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->mhz)
2025/01/17 15:59:19 23B381B0 r (reader) hdpluswhite [internal] Warning: Card returned error on setting ifsd value to 251
2025/01/17 15:59:20 23B381B0 r (reader) hdpluswhite [internal] detect native nagra card
2025/01/17 15:59:21 23B381B0 r (reader) hdpluswhite [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2025/01/17 15:59:22 23B381B0 r (reader) hdpluswhite [internal] T1 Resync command error, trying to reactivate!
2025/01/17 15:59:23 23B381B0 r (reader) hdpluswhite [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2025/01/17 15:59:23 23B381B0 r (reader) hdpluswhite [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2025/01/17 15:59:23 23B381B0 r (reader) hdpluswhite [internal] Calculated work ETU is 9.50 us reader mhz = 337
2025/01/17 15:59:23 23B381B0 r (reader) hdpluswhite [internal] Buffers readed 0 bytes total time_us 38
2025/01/17 15:59:24 23B381B0 r (reader) hdpluswhite [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->mhz)
2025/01/17 15:59:25 23B381B0 r (reader) hdpluswhite [internal] Warning: Card returned error on setting ifsd value to 251
2025/01/17 15:59:26 23B381B0 r (reader) hdpluswhite [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2025/01/17 15:59:27 23B381B0 r (reader) hdpluswhite [internal] T1 Resync command error, trying to reactivate!
2025/01/17 15:59:28 23B381B0 r (reader) hdpluswhite [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2025/01/17 15:59:28 23B381B0 r (reader) hdpluswhite [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2025/01/17 15:59:28 23B381B0 r (reader) hdpluswhite [internal] Calculated work ETU is 9.50 us reader mhz = 337
2025/01/17 15:59:28 23B381B0 r (reader) hdpluswhite [internal] Buffers readed 0 bytes total time_us 40
2025/01/17 15:59:29 23B381B0 r (reader) hdpluswhite [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->mhz)
2025/01/17 15:59:30 23B381B0 r (reader) hdpluswhite [internal] Warning: Card returned error on setting ifsd value to 251
2025/01/17 15:59:30 23B381B0 r (reader) hdpluswhite [internal] card system not supported
2025/01/17 15:59:30 23B381B0 r (reader) hdpluswhite [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2025/01/17 15:59:30 23B381B0 r (reader) hdpluswhite [internal] card initializing error
2025/01/17 15:59:31 00000000 s (main) init for all local cards done

Edit:
und das ist der Log Auszug mit der alten Oscam die ohne weiteres funktioniert.

2025/01/17 17:06:44 0 s >> OSCam << cardserver started, version 1.20-NFR-EMU-unstable_svn9449, build r659 (mipsel-unknown-linux-gnu)
2025/01/17 17:06:44 0 s creating pidfile /var/tmp/oscam-emu.pid with pid 3637
2025/01/17 17:06:44 0 s services reloaded: 0 services freed, 61 services loaded, rejected 0
2025/01/17 17:06:44 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2025/01/17 17:06:44 0 s signal handling initialized
2025/01/17 17:06:44 0 s 2 provid's loaded
2025/01/17 17:06:44 0 s cs378x: initialized (fd=5, port=30000)
2025/01/17 17:06:44 0 s hdpluswhite [internal] creating thread for device /dev/sci0
2025/01/17 17:06:44 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2025/01/17 17:06:44 0 s waiting for local card init
2025/01/17 17:06:44 53AC18 r hdpluswhite [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=357)
2025/01/17 17:06:44 76B00600 h webif: decompressed 69280 bytes back into 194112 bytes
2025/01/17 17:06:44 76B00600 h HTTP Server running. ip=0.0.0.0 port=83
2025/01/17 17:06:45 53AC18 r hdpluswhite [internal] card detected
2025/01/17 17:06:45 53AC18 r hdpluswhite [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2025/01/17 17:06:45 53AC18 r hdpluswhite [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2025/01/17 17:06:45 53AC18 r hdpluswhite [internal] Calculated work ETU is 8.70 us reader mhz = 368
2025/01/17 17:06:45 53AC18 r hdpluswhite [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2025/01/17 17:06:45 53AC18 r hdpluswhite [internal] Card responded ok for ifsd request of 251
2025/01/17 17:06:46 53AC18 r hdpluswhite [internal] detect native nagra card
2025/01/17 17:06:47 53AC18 r hdpluswhite [internal] found card system nagra
2025/01/17 17:06:47 53AC18 r hdpluswhite [nagra] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2025/01/17 17:06:47 53AC18 r hdpluswhite [nagra] ROM: D N A S P 1 4 2
2025/01/17 17:06:47 53AC18 r hdpluswhite [nagra] REV: R e v G C 6
2025/01/17 17:06:47 53AC18 r hdpluswhite [nagra] SER: ############
2025/01/17 17:06:47 53AC18 r hdpluswhite [nagra] CAID: 1830
2025/01/17 17:06:47 53AC18 r hdpluswhite [nagra] Prv.ID: 00 00 34 11 (sysid)
2025/01/17 17:06:47 53AC18 r hdpluswhite [nagra] Prv.ID: 00 00 00 00
2025/01/17 17:06:48 53AC18 r hdpluswhite [nagra] IRD ID: ############
2025/01/17 17:06:48 53AC18 r hdpluswhite [nagra] active to: 2025/03/20 11:59
2025/01/17 17:06:48 53AC18 r hdpluswhite [nagra] -----------------------------------------
2025/01/17 17:06:48 53AC18 r hdpluswhite [nagra] |id |tier |valid from |valid to |
2025/01/17 17:06:48 53AC18 r hdpluswhite [nagra] +----+--------+------------+------------+
2025/01/17 17:06:48 53AC18 r hdpluswhite [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2025/01/17 17:06:48 53AC18 r hdpluswhite [nagra] |8011|0064 |2010/08/14 |2011/08/15 |
2025/01/17 17:06:48 53AC18 r hdpluswhite [nagra] |8011|0BB8 |2019/12/24 |2025/03/08 |
2025/01/17 17:06:48 53AC18 r hdpluswhite [nagra] |8011|0BEA |2012/12/20 |2015/02/11 |
2025/01/17 17:06:48 53AC18 r hdpluswhite [nagra] -----------------------------------------
2025/01/17 17:06:48 53AC18 r hdpluswhite [nagra] ready for requests
 
Zuletzt bearbeitet von einem Moderator:
Wenn du die oscam-master vom Feed installiert hast, dann muß die auch für die HD+01 Karte konfiguriert werden.
 
[reader]
label = hdpluswhite
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 1830
boxid = 12345678
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 368
# cardmhz = 368 #habe ich zum test mal auskommentiert ob die Karte auch ohne den Eintrag angezogen wird. Funktioniert auch mit der alten Oscam
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1

[account]
user = local
keepalive = 1
au = 1
group = 1,2,3


[account]
user = wohnzimmer
pwd = oscam
group = 1
au = 1



[global]
logfile = /etc/tuxbox/config/oscam-emu/log/oscam.log
maxlogsize = 1000
waitforcards_extra_delay = 1000
emmlogdir = /etc/tuxbox/config/oscam-emu/emm/

[cache]

[cs378x]
port = 30000

[streamrelay]
stream_emm_enabled = 5

[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
request_mode = 1
delayer = 60
ecminfo_type = 4
user = local
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox

[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255,255.255.255.255,255.255.255.255,255.255.255.255
 
ultima schrieb:
Wenn du die oscam-master vom Feed installiert hast, dann muß die auch für die HD+01 Karte konfiguriert werden.
Zum Vergrößern anklicken....
eben gerade einmal die oscam Master installiert.
alte Oscam gestoppt und autostart deaktiviert
Oscam Master gestartet
sicherheitshalber die Box nochmal neugestartet

Die neuste Oscam Master bekommt die Karte nicht initalisiert.


  • 2025/01/17 18:03:33 00000000 s (main) System name = Linux
  • 2025/01/17 18:03:33 00000000 s (main) Host name = optimussos2plus
  • 2025/01/17 18:03:33 00000000 s (main) Release = 3.9.7
  • 2025/01/17 18:03:33 00000000 s (main) Version = #1 SMP Thu Nov 20 04:59:03 UTC 2014
  • 2025/01/17 18:03:33 00000000 s (main) Machine = mips
  • 2025/01/17 18:03:33 00000000 s (main) Stb model = dm8000
  • 2025/01/17 18:03:33 00000000 s (main) Stb vumodel = vusolo2
  • 2025/01/17 18:03:33 00000000 s (main) Stb boxtype = dm8000
  • 2025/01/17 18:03:33 00000000 s (main) creating pidfile /var/tmp/oscam-master.pid with pid 7854
  • 2025/01/17 18:03:33 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  • 2025/01/17 18:03:33 00000000 s (main) signal handling initialized
  • 2025/01/17 18:03:33 00000000 s (signing) Signature = Valid - Binary's signature was successfully verified using the built-in Public Key
  • 2025/01/17 18:03:33 00000000 s (signing) Certificate = Trusted CA Certificate, valid until 12.01.2026 14:37:56
  • 2025/01/17 18:03:33 00000000 s (net) cccam: initialized (fd=5, port=12000)
  • 2025/01/17 18:03:33 00000000 s (reader) reader0_hd+_hd01 [internal] creating thread for device /dev/sci0
  • 2025/01/17 18:03:33 60BB3851 h (webif) HTTP Server running. ip=:: port=83 (no SSL)
  • 2025/01/17 18:03:33 00000000 s (main) waiting for local card init
  • 2025/01/17 18:03:33 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Dreambox dm8000 found! set Internal Card-MHz = 2700
  • 2025/01/17 18:03:34 012AA6D1 r (reader) reader0_hd+_hd01 [internal] card detected
  • 2025/01/17 18:03:35 012AA6D1 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:03:37 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:03:38 012AA6D1 r (reader) reader0_hd+_hd01 [internal] detect native nagra card
  • 2025/01/17 18:03:39 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2025/01/17 18:03:40 012AA6D1 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
  • 2025/01/17 18:03:41 012AA6D1 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:03:43 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:03:44 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2025/01/17 18:03:45 012AA6D1 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
  • 2025/01/17 18:03:46 012AA6D1 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:03:48 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:03:48 012AA6D1 r (reader) reader0_hd+_hd01 [internal] card system not supported
  • 2025/01/17 18:03:48 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Normal mode failed, reverting to Deprecated Mode
  • 2025/01/17 18:03:49 012AA6D1 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:03:50 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:03:51 012AA6D1 r (reader) reader0_hd+_hd01 [internal] detect native nagra card
  • 2025/01/17 18:03:52 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2025/01/17 18:03:54 012AA6D1 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
  • 2025/01/17 18:03:55 012AA6D1 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:03:56 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:03:57 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2025/01/17 18:03:59 012AA6D1 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
  • 2025/01/17 18:04:00 012AA6D1 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:04:01 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:04:01 012AA6D1 r (reader) reader0_hd+_hd01 [internal] card system not supported
  • 2025/01/17 18:04:01 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Try reset reader before each command
  • 2025/01/17 18:04:02 012AA6D1 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:04:04 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:04:05 012AA6D1 r (reader) reader0_hd+_hd01 [internal] detect native nagra card
  • 2025/01/17 18:04:06 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2025/01/17 18:04:07 012AA6D1 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
  • 2025/01/17 18:04:08 012AA6D1 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:04:10 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:04:11 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2025/01/17 18:04:12 012AA6D1 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
  • 2025/01/17 18:04:13 012AA6D1 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:04:15 012AA6D1 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:04:15 012AA6D1 r (reader) reader0_hd+_hd01 [internal] card system not supported
  • 2025/01/17 18:04:15 012AA6D1 r (reader) reader0_hd+_hd01 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
  • 2025/01/17 18:04:15 012AA6D1 r (reader) reader0_hd+_hd01 [internal] card initializing error
 
Dann poste doch nun mal von der oscam-master oscam.config, oscam.server und oscam.user in Spoiler.
 
@Smiley007
mmh von der alten Version weg zu kommen um evtl. die Vorteile von den neuen Versionen nutzen.
HD01 Karten nicht zwingend notwendig.
Evtl. aber mit anderen PAY TV Anbietern.



Hab nur den HD+ relevanten Teil kopiert

[reader]
label = reader0_hd+_hd01
protocol = internal
device = /dev/sci0
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2,0

[account]
user = dvbapi
pwd =
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
uniq = 3
au = 1

[global]

[cccam]
port = 12000
version = 2.3.2

[dvbapi]
enabled = 1
au = 1
user = dvbapi

[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255,fd00::-fdff:ffff:ffff:ffff:ffff:ffff:ffff:ffff,2000::-3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff,::1
httphideidleclients = 0
 
[reader]
label = reader0_hd+_hd01(unten)
enable = 1
protocol = internal
device = /dev/sci0
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
 
das enable = 1 oder nicht hat keine Wirkung.
und bis zu dem EMM Cache kommt die Karte ja garnicht.
Die wären doch nur relevant wenn die EMM Verarbeitet werden, deutlich nach der Initalisiserung der Karte
vorher muss zumindest in der Log die Entitlements kommen
 
oscam-smod vom Feed sollte die HD+01 Karte auch ohne Configs hell machen.
 
Oscam-SMod kann bestimmt auch auf allen anderen Receivern die HD01 hell machen.
Nur leider bekommt die Version das auf dem Edision Optimuss OS2+ nicht hin.
Dazu hatte ich bereits auch von Schimmelreiter was dazu gelesen,
Vermutlich liegt es am Treiber für den Receiver,
nur leider hatte ich keine Lösung dazu gefunden.

Dies hat mich gewogen gefühlt dazu mal dieses Thema aufzumachen in der Hoffnung das das geballte Wissen hier evtl. zu einer Lösung kommt .
Da ich es mit der Smod, Stable, trunk usw. nicht hin bekommen habe die HD01 in diesem Receiver hell zu bekommen.

Nur wie oben bereits erwäht mit der uralt Version.

  • 2025/01/17 18:52:29 00000000 s (main) System name = Linux
  • 2025/01/17 18:52:29 00000000 s (main) Host name = optimussos2plus
  • 2025/01/17 18:52:29 00000000 s (main) Release = 3.9.7
  • 2025/01/17 18:52:29 00000000 s (main) Version = #1 SMP Thu Nov 20 04:59:03 UTC 2014
  • 2025/01/17 18:52:29 00000000 s (main) Machine = mips
  • 2025/01/17 18:52:29 00000000 s (main) Stb model = dm8000
  • 2025/01/17 18:52:29 00000000 s (main) Stb vumodel = vusolo2
  • 2025/01/17 18:52:29 00000000 s (main) Stb boxtype = dm8000
  • 2025/01/17 18:52:29 00000000 s (main) creating pidfile /var/tmp/oscam-smod.pid with pid 11344
  • 2025/01/17 18:52:29 00000000 s (emu) OSCam-Emu version 798
  • 2025/01/17 18:52:29 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  • 2025/01/17 18:52:29 00000000 s (main) signal handling initialized
  • 2025/01/17 18:52:29 00000000 s (config) 1 provid's loaded
  • 2025/01/17 18:52:29 00000000 s (config) 1 service-id's loaded in 0 ms
  • 2025/01/17 18:52:29 00000000 s (reader) sci0 [internal] creating thread for device /dev/sci0
  • 2025/01/17 18:52:29 00000000 s (main) waiting for local card init
  • 2025/01/17 18:52:29 1614D1BA r (reader) sci0 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.68 MHz)
  • 2025/01/17 18:52:29 1614D1BA r (reader) sci0 [internal] Reader sci internal, detected box type: dm8000
  • 2025/01/17 18:52:29 2652893E h (webif) webif: decompressed 206468 bytes back into 529592 bytes
  • 2025/01/17 18:52:29 2652893E h (webif) HTTP Server running. ip=:: port=8888
  • 2025/01/17 18:52:30 1614D1BA r (reader) sci0 [internal] card detected
  • 2025/01/17 18:52:31 1614D1BA r (reader) sci0 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:52:31 1614D1BA r (reader) sci0 [internal] Astra HD+ HD01/HD02 recognized
  • 2025/01/17 18:52:32 1614D1BA r (reader) sci0 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:52:33 1614D1BA r (reader) sci0 [internal] detect native nagra card
  • 2025/01/17 18:52:35 1614D1BA r (reader) sci0 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2025/01/17 18:52:36 1614D1BA r (reader) sci0 [internal] T1 Resync command error, trying to reactivate!
  • 2025/01/17 18:52:37 1614D1BA r (reader) sci0 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:52:37 1614D1BA r (reader) sci0 [internal] Astra HD+ HD01/HD02 recognized
  • 2025/01/17 18:52:38 1614D1BA r (reader) sci0 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:52:40 1614D1BA r (reader) sci0 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2025/01/17 18:52:41 1614D1BA r (reader) sci0 [internal] T1 Resync command error, trying to reactivate!
  • 2025/01/17 18:52:42 1614D1BA r (reader) sci0 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:52:42 1614D1BA r (reader) sci0 [internal] Astra HD+ HD01/HD02 recognized
  • 2025/01/17 18:52:43 1614D1BA r (reader) sci0 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:52:43 1614D1BA r (reader) sci0 [internal] card system not supported
  • 2025/01/17 18:52:43 1614D1BA r (reader) sci0 [internal] Normal mode failed, reverting to Deprecated Mode
  • 2025/01/17 18:52:44 1614D1BA r (reader) sci0 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:52:44 1614D1BA r (reader) sci0 [internal] Astra HD+ HD01/HD02 recognized
  • 2025/01/17 18:52:46 1614D1BA r (reader) sci0 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:52:47 1614D1BA r (reader) sci0 [internal] detect native nagra card
  • 2025/01/17 18:52:48 1614D1BA r (reader) sci0 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2025/01/17 18:52:49 1614D1BA r (reader) sci0 [internal] T1 Resync command error, trying to reactivate!
  • 2025/01/17 18:52:50 1614D1BA r (reader) sci0 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:52:50 1614D1BA r (reader) sci0 [internal] Astra HD+ HD01/HD02 recognized
  • 2025/01/17 18:52:52 1614D1BA r (reader) sci0 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:52:53 1614D1BA r (reader) sci0 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2025/01/17 18:52:54 1614D1BA r (reader) sci0 [internal] T1 Resync command error, trying to reactivate!
  • 2025/01/17 18:52:55 1614D1BA r (reader) sci0 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2025/01/17 18:52:55 1614D1BA r (reader) sci0 [internal] Astra HD+ HD01/HD02 recognized
  • 2025/01/17 18:52:57 1614D1BA r (reader) sci0 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2025/01/17 18:52:57 1614D1BA r (reader) sci0 [internal] card system not supported
  • 2025/01/17 18:52:57 1614D1BA r (reader) sci0 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
  • 2025/01/17 18:52:57 1614D1BA r (reader) sci0 [internal] card initializing error
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

G
  • Gesperrt
gelöst ORF Karte via OSCam freischalten mitTvHeadend
2
Antworten
23
Aufrufe
529
wiscal
F
gelöst wahrscheinlich Jungfrau G02 Kabel Deutschland bekommen, Nun mehr Info erfahren sammeln
Antworten
8
Aufrufe
926
datamen
N
Oscam verhunzt nach Software-Update
Antworten
5
Aufrufe
1K
salidos
S
  • Angepinnt
Tools Tool: easyE2Setting für die vollautomatische Umsetzung aller ICAM-Sender uvm. am enigma2 SAT-Receiver - UPDATE VERSION 2.0.1 !!!
4 5 6
Antworten
79
Aufrufe
39K
Tweety_2000
T
H
gelöst HD+Karte aktiv - rejected group, no matching reader
Antworten
5
Aufrufe
4K
humaxdsl
H
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…