Oscam Datei aktualisieren

[Brabirl]

AW: Oscam Datei aktualisieren

habe 5 client s

[reader]
label = Sky V14
protocol = smartreader
device = SRv2;Serial:12345678
caid = 098C
boxid = 12345678
Ins7e11 = 15
detect = cd
mhz = 369
cardmhz = 369
group = 1
emmcache = 1,3,2
ndsversion = 2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

log

- - - - - - - - - -

der log ist dan so.
mit der alten version von oscam ist der smargo v2 nicht gelaufen mit dern neuen jetzt schon
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Apr 24 14:51:05 2015
-------------------------------------------------------------------------------
2015/04/24 14:51:05 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10651 (i486-linux-gnu-libusb)
2015/04/24 14:51:05 0 s (main) System name = Linux
2015/04/24 14:51:05 0 s (main) Host name = debian
2015/04/24 14:51:05 0 s (main) Release = 3.2.0-4-686-pae
2015/04/24 14:51:05 0 s (main) Version = #1 SMP Debian 3.2.51-1
2015/04/24 14:51:05 0 s (main) Machine = i686
2015/04/24 14:51:05 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2648
2015/04/24 14:51:05 0 s (config) userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
2015/04/24 14:51:05 0 s (main) signal handling initialized
2015/04/24 14:51:05 0 s (net) cs357x: initialized (fd=5, port=25000, ip=192.168.2.100)
2015/04/24 14:51:05 0 s (net) cccam: initialized (fd=6, port=50000, ip=192.168.2.100)
2015/04/24 14:51:05 0 s (reader) Sky_V14 [smartreader] creating thread for device SRv2;Serial:12345678
2015/04/24 14:51:05 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/04/24 14:51:05 0 s (main) waiting for local card init
2015/04/24 14:51:05 8C9F9E8 r (reader) Sky_V14 [smartreader] Reader initialized (device=SRv2;Serial:12345678, detect=cd, mhz= AUTO, cardmhz=369)
2015/04/24 14:51:05 8CA18D0 h (webif) webif: decompressed 158520 bytes back into 377460 bytes
2015/04/24 14:51:05 8CA18D0 h (webif) HTTP Server running. ip=192.168.2.100 port=16002
2015/04/24 14:51:06 8C9F9E8 r (reader) Sky_V14 [smartreader] card detected
2015/04/24 14:51:10 8C9F9E8 r (reader) Sky_V14 [smartreader] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/24 14:51:10 8C9F9E8 r (reader) Sky_V14 [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/04/24 14:51:10 8C9F9E8 r (reader) Sky_V14 [smartreader] Calculated work ETU is 4.35 us reader mhz = 534
2015/04/24 14:51:10 8C9F9E8 r (reader) Sky_V14 [smartreader] Effective reader settings mhz =534 F= 372 D= 16 N=2 T=0 inv=1 parity=ODD
2015/04/24 14:51:11 8C9F9E8 r (reader) Sky_V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/04/24 14:51:12 8C9F9E8 r (reader) Sky_V14 [smartreader] Card type: P1TV
2015/04/24 14:51:12 8C9F9E8 r (reader) Sky_V14 [smartreader] Rom version: 20AA
2015/04/24 14:51:12 8C9F9E8 r (reader) Sky_V14 [smartreader] Credit available on card: 0 euro
2015/04/24 14:51:12 8C9F9E8 r (reader) Sky_V14 [smartreader] Extended 4C detected
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [smartreader] FuseByte: 25
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [smartreader] Region Code: 00BO0102
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [smartreader] Country Code: DEU
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [smartreader] Pincode read: 4949
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [smartreader] PCB settings: FF FF FF FF
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [smartreader] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [smartreader] ready for requests
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [smartreader] found card system videoguard2
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [videoguard2] card detected
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [videoguard2] ------------------------------------------------------------------
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/04/24 14:51:13 8C9F9E8 r (reader) Sky_V14 [videoguard2] +---------+----------+---------------------+---------------------+
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 0058 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 0056 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 0057 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 0068 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 0069 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 006a --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 006b --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 006c --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 0065 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 006d --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 0066 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 006e --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 0067 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 006f --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 007b --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 007d --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 0081 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 008e --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 00c0 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 00c8 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 00c9 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 00ca --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 00c7 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 00d4 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 00e4 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 00e5 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 00fa --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 00f3 --| 2015/06/16-01:00:00 |
2015/04/24 14:51:14 8C9F9E8 r (reader) Sky_V14 [videoguard2] |-- 00 ---|-- 00ff --| 2015/06/16-01:00:00 |
2015/04/24 14:51:15 8C9F9E8 r (reader) Sky_V14 [videoguard2] ------------------------------------------------------from-ins70--
2015/04/24 14:51:15 0 s (main) init for all local cards done
2015/04/24 14:51:15 0 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/04/24 14:51:15 0 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/04/24 14:51:15 0 s (anticasc) ERROR: anti cascading is enabled but ac_logfile is not set.
2015/04/24 14:51:15 8CA7C78 c (client) anonymous disconnected from 192.168.2.154
2015/04/24 14:51:15 8CA77B0 c (client) anonymous disconnected from 192.168.2.152
2015/04/24 14:51:15 8CA72E8 c (client) anonymous disconnected from 192.168.2.155
2015/04/24 14:51:15 8CA8140 c (client) encrypted cccam-client 192.168.2.153 granted (linkey, au=auto (1 reader))
2015/04/24 14:51:24 8CA4A30 c (client) encrypted cccam-client 192.168.2.155 granted (gigablue2, au=auto (1 reader))
2015/04/24 14:51:24 8CADE70 c (client) encrypted cccam-client 192.168.2.152 granted (gigablue1, au=auto (1 reader))
2015/04/24 14:51:24 8CA5520 c (client) encrypted cccam-client 192.168.2.154 granted (gigablue3, au=auto (1 reader))
2015/04/24 14:51:30 8CADE70 c (ecm) gigablue1 (098C&000000/07D2/EF75/98:A84ECAC85FFE33162893D20E202D639F): found (274 ms) by Sky_V14
2015/04/24 14:51:37 8CADE70 c (ecm) gigablue1 (098C&000000/07D2/EF75/98:5C44CCD43348CEAEF1B1AB1021FF336F): found (262 ms) by Sky_V14
2015/04/24 14:51:44 8CADE70 c (ecm) gigablue1 (098C&000000/07D2/EF75/98:4864B0EA2BF51BC95DC0110E9CC95973): found (262 ms) by Sky_V14
2015/04/24 14:51:51 8CADE70 c (ecm) gigablue1 (098C&000000/07D2/EF75/98:9BD37DD6B38DA561BD6A4232CA823704): found (262 ms) by Sky_V14
2015/04/24 14:51:58 8CADE70 c (ecm) gigablue1 (098C&000000/07D2/EF75/98:C04AAD050B9631964C4F19354FFEFC67): found (262 ms) by Sky_V14
2015/04/24 14:52:05 8CADE70 c (ecm) gigablue1 (098C&000000/07D2/EF75/98:0C8B44E02AEA5C95FA6E6ED8C0403676): found (264 ms) by Sky_V14

 

[4gx35]

AW: Oscam Datei aktualisieren

oben war es aber der smargo v 1.5 ? ins7e11=15 und ndsversion=2 auch drin,
denn atr xx xx 13 war nur 13 standard mode, kein fastmode, dann steht dort auch die 15

also v2 im fastmode atr xx xx 15 schlechter als v1 mit standard 13 ???

falls der v1 für dich keine freez probleme macht, nimm lieber den
oder teste beide mit allen clients online
ansonsten würde ich für v14 keinen smartreader mehr verwenden,
easymouse2 20€ oder omnikey pcsc reader 10€ ebay, aber pcsc unterstützung muss evtl nachinstalliert werden,
ebenso oscam mit pcsc notwendig (war aber auch im download)

 

[Brabirl]

AW: Oscam Datei aktualisieren

wollte wissen wenn ich den strom vom pc nehme für die nachtabschaltung dann startet sich die oscam aber die karte wird nicht erkannt wie im follgenden log
habe den strom getrennt und wieder draufgegeben

>> OSCam << cardserver started at Fri Apr 24 14:56:48 2015
-------------------------------------------------------------------------------
2015/04/24 14:56:48 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10651 (i486-linux-gnu-libusb)
2015/04/24 14:56:48 0 s (main) System name = Linux
2015/04/24 14:56:48 0 s (main) Host name = debian
2015/04/24 14:56:48 0 s (main) Release = 3.2.0-4-686-pae
2015/04/24 14:56:48 0 s (main) Version = #1 SMP Debian 3.2.51-1
2015/04/24 14:56:48 0 s (main) Machine = i686
2015/04/24 14:56:48 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2460
2015/04/24 14:56:48 0 s (config) userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
2015/04/24 14:56:48 0 s (main) signal handling initialized
2015/04/24 14:56:48 0 s (net) cs357x: initialized (fd=5, port=25000, ip=192.168.2.100)
2015/04/24 14:56:48 0 s (net) cccam: initialized (fd=6, port=50000, ip=192.168.2.100)
2015/04/24 14:56:48 0 s (reader) Sky_V14 [smartreader] creating thread for device SRv2;Serial:12345678
2015/04/24 14:56:48 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/04/24 14:56:48 0 s (main) waiting for local card init
2015/04/24 14:56:48 97CEA10 h (webif) webif: decompressed 158520 bytes back into 377460 bytes
2015/04/24 14:56:48 97CC9E8 r (reader) Sky_V14 [smartreader] Reader initialized (device=SRv2;Serial:12345678, detect=cd, mhz= AUTO, cardmhz=369)
2015/04/24 14:56:48 97CEA10 h (webif) HTTP Server running. ip=192.168.2.100 port=16002
2015/04/24 14:56:49 97CC9E8 r (reader) Sky_V14 [smartreader] card detected
2015/04/24 14:56:53 97CC9E8 r (reader) Sky_V14 [smartreader] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/24 14:56:53 97CC9E8 r (reader) Sky_V14 [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/04/24 14:56:53 97CC9E8 r (reader) Sky_V14 [smartreader] Calculated work ETU is 17.42 us reader mhz = 534
2015/04/24 14:56:53 97CC9E8 r (reader) Sky_V14 [smartreader] Effective reader settings mhz =534 F= 372 D= 4 N=2 T=0 inv=1 parity=ODD
2015/04/24 14:56:54 97CC9E8 r (reader) Sky_V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/04/24 14:56:55 97CC9E8 r (reader) Sky_V14 [smartreader] Card type: P1TV
2015/04/24 14:56:55 97CC9E8 r (reader) Sky_V14 [smartreader] Rom version: 20AA
2015/04/24 14:56:55 97CC9E8 r (reader) Sky_V14 [smartreader] Credit available on card: 0 euro
2015/04/24 14:56:55 97CC9E8 r (reader) Sky_V14 [smartreader] Extended 4C detected
2015/04/24 14:56:55 97CC9E8 r (reader) Sky_V14 [smartreader] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/04/24 14:56:55 97CC9E8 r (reader) Sky_V14 [smartreader] found card system videoguard2
2015/04/24 14:56:55 97CC9E8 r (reader) Sky_V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/04/24 14:56:55 97CC9E8 r (reader) Sky_V14 [videoguard2] card detected
2015/04/24 14:56:55 97CC9E8 r (reader) Sky_V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/04/24 14:56:56 97CC9E8 r (reader) Sky_V14 [smartreader] Error activating card.
2015/04/24 14:56:59 97CC9E8 r (-) -- Skipped 2 duplicated log lines --
2015/04/24 14:56:59 97CC9E8 r (reader) Sky_V14 [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/04/24 14:56:59 97CC9E8 r (reader) Sky_V14 [smartreader] card initializing error
2015/04/24 14:57:00 0 s (main) init for all local cards done
2015/04/24 14:57:00 0 s (anticasc) ERROR: anti cascading is enabled but ac_logfile is not set.
2015/04/24 14:57:00 97D4D40 c (client) anonymous disconnected from 192.168.2.152
2015/04/24 14:57:00 97D3EE8 c (client) anonymous disconnected from 192.168.2.155
2015/04/24 14:57:00 97D43B0 c (client) anonymous disconnected from 192.168.2.153
2015/04/24 14:57:00 97D4878 c (client) anonymous disconnected from 192.168.2.154
2015/04/24 14:57:00 97D5208 c (client) encrypted cccam-client 192.168.2.153 granted (linkey, au=auto (1 reader))
2015/04/24 14:57:00 97D5208 c (client) linkey disconnected from 192.168.2.153
2015/04/24 14:57:00 97DE228 c (client) encrypted cccam-client 192.168.2.153 granted (linkey, au=auto (1 reader))
2015/04/24 14:57:03 97D91F8 c (client) encrypted cccam-client 192.168.2.155 granted (gigablue2, au=auto (1 reader))
2015/04/24 14:57:04 97DAC48 c (client) encrypted cccam-client 192.168.2.154 granted (gigablue3, au=auto (1 reader))
2015/04/24 14:57:06 97D5ED8 c (client) encrypted cccam-client 192.168.2.152 granted (gigablue1, au=auto (1 reader))
2015/04/24 14:57:11 97D5ED8 c (ecm) gigablue1 (098C&000000/025B/0083/98:828180E5B4B419D7CBD257239570835B): rejected group (0 ms) (no matching reader)
2015/04/24 14:57:18 97D5ED8 c (ecm) gigablue1 (098C&000000/025B/0083/98:F49BC53CEFF50BADA1C125D2093888B8): rejected group (0 ms) (no matching reader)

- - - - - - - - - -

aber nach restart im oscam.webif geht alles wieder

- - - - - - - - - -

zusammenfassung
ich habe einen smargo mit fw 1.05 und smargo v2
habe getest mit der alten version von oscam mit fw 1.05 und smargo v2 es ging aber nur mit fw1.05 soweit okay.

habe jetzt die neue version von oscam mit fw 1.05 und smargo v2 geht jetzt mit beiden soweit okay.

ich habe nur das problem mit der nachtabschaltung wenn ich vom server den strom um ca. 2 uhr bis 6 uhr und dann schaltet sich der pc von selber wieder ein aber die oscam sagt no ideent, aber wenn ich von hand einen restart mache geht wieder alles.
kapier nicht wenn der pc hochfährt warum das der reader nicht ohne restart geht.

 

[4gx35]

AW: Oscam Datei aktualisieren

investiere lieber in anderen reader und zusätzlich in einen raspi, der spart strom ohne abschaltung

bei neuer oscam sind im webif beim reader-write emms jetzt auch die geloggten emms zu sehen
zum schreiben einer verlängerung nur noch anklicken und launch

 

[Brabirl]

AW: Oscam Datei aktualisieren

habe dann immer diesen log wenn strom weck ist.
habe jetzt mal getest die mhz und cardmhz raus zunehmen hilft aber auch nichts
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Apr 24 15:13:11 2015
-------------------------------------------------------------------------------
2015/04/24 15:13:11 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10651 (i486-linux-gnu-libusb)
2015/04/24 15:13:11 0 s (main) System name = Linux
2015/04/24 15:13:11 0 s (main) Host name = debian
2015/04/24 15:13:11 0 s (main) Release = 3.2.0-4-686-pae
2015/04/24 15:13:11 0 s (main) Version = #1 SMP Debian 3.2.51-1
2015/04/24 15:13:11 0 s (main) Machine = i686
2015/04/24 15:13:11 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2473
2015/04/24 15:13:11 0 s (config) userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
2015/04/24 15:13:11 0 s (main) signal handling initialized
2015/04/24 15:13:11 0 s (net) cs357x: initialized (fd=5, port=25000, ip=192.168.2.100)
2015/04/24 15:13:11 0 s (net) cccam: initialized (fd=6, port=50000, ip=192.168.2.100)
2015/04/24 15:13:11 0 s (reader) Sky_V14 [smartreader] creating thread for device SRv2;Serial:12345678
2015/04/24 15:13:11 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/04/24 15:13:11 0 s (main) waiting for local card init
2015/04/24 15:13:11 9ABE588 h (webif) webif: decompressed 158520 bytes back into 377460 bytes
2015/04/24 15:13:11 9ABE588 h (webif) HTTP Server running. ip=192.168.2.100 port=16002
2015/04/24 15:13:11 9AB46C8 r (reader) Sky_V14 [smartreader] Reader initialized (device=SRv2;Serial:12345678, detect=cd, mhz= AUTO, cardmhz=369)
2015/04/24 15:13:12 9AB46C8 r (reader) Sky_V14 [smartreader] card detected
2015/04/24 15:13:16 9AB46C8 r (reader) Sky_V14 [smartreader] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/24 15:13:16 9AB46C8 r (reader) Sky_V14 [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/04/24 15:13:16 9AB46C8 r (reader) Sky_V14 [smartreader] Calculated work ETU is 17.42 us reader mhz = 534
2015/04/24 15:13:16 9AB46C8 r (reader) Sky_V14 [smartreader] Effective reader settings mhz =534 F= 372 D= 4 N=2 T=0 inv=1 parity=ODD
2015/04/24 15:13:17 9AB46C8 r (reader) Sky_V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/04/24 15:13:19 9AB46C8 r (reader) Sky_V14 [smartreader] Card type: P1TV
2015/04/24 15:13:19 9AB46C8 r (reader) Sky_V14 [smartreader] Rom version: 20AA
2015/04/24 15:13:19 9AB46C8 r (reader) Sky_V14 [smartreader] Credit available on card: 0 euro
2015/04/24 15:13:19 9AB46C8 r (reader) Sky_V14 [smartreader] Extended 4C detected
2015/04/24 15:13:19 9AB46C8 r (reader) Sky_V14 [smartreader] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/04/24 15:13:19 9AB46C8 r (reader) Sky_V14 [smartreader] found card system videoguard2
2015/04/24 15:13:19 9AB46C8 r (reader) Sky_V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/04/24 15:13:19 9AB46C8 r (reader) Sky_V14 [videoguard2] card detected
2015/04/24 15:13:19 9AB46C8 r (reader) Sky_V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/04/24 15:13:20 9AB46C8 r (reader) Sky_V14 [smartreader] Error activating card.
2015/04/24 15:13:23 9AB46C8 r (-) -- Skipped 2 duplicated log lines --
2015/04/24 15:13:23 9AB46C8 r (reader) Sky_V14 [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/04/24 15:13:23 9AB46C8 r (reader) Sky_V14 [smartreader] card initializing error
2015/04/24 15:13:23 0 s (main) init for all local cards done
2015/04/24 15:13:23 0 s (anticasc) ERROR: anti cascading is enabled but ac_logfile is not set.
2015/04/24 15:13:23 9ABAC88 c (client) anonymous disconnected from 192.168.2.154
2015/04/24 15:13:23 9ABA7C0 c (client) anonymous disconnected from 192.168.2.153
2015/04/24 15:13:23 9ABA2F8 c (client) anonymous disconnected from 192.168.2.155
2015/04/24 15:13:23 9AB9E30 c (client) anonymous disconnected from 192.168.2.152
2015/04/24 15:13:23 9ABB150 c (client) encrypted cccam-client 192.168.2.153 granted (linkey, au=auto (1 reader))
2015/04/24 15:13:23 9ABB150 c (client) linkey disconnected from 192.168.2.153
2015/04/24 15:13:23 9AC60C8 c (client) encrypted cccam-client 192.168.2.153 granted (linkey, au=auto (1 reader))
2015/04/24 15:13:27 9AC4548 c (client) encrypted cccam-client 192.168.2.152 granted (gigablue1, au=auto (1 reader))
2015/04/24 15:13:27 9ABB910 c (client) encrypted cccam-client 192.168.2.155 granted (gigablue2, au=auto (1 reader))
2015/04/24 15:13:30 9ABD400 c (client) encrypted cccam-client 192.168.2.154 granted (gigablue3, au=auto (1 reader))
2015/04/24 15:13:32 9AC4548 c (ecm) gigablue1 (098C&000000/025B/0083/98:6B034151C175E33563D8185348DF7FD8): rejected group (0 ms) (no matching reader)

 

[4gx35]

AW: Oscam Datei aktualisieren

kannst evtl. noch cronjob einrichten, der oscam um 6.10 neu startet, falls du dich mit linux auskennst,
da kann ich dir nicht helfen

 

[Brabirl]

AW: Oscam Datei aktualisieren

Saved EMM's for Reader: Sky_V14
Unique EMM Sky_V14_unique_emm.log (Size: 0.16 kB): 1 different EMM's from a total off 1 Entrys
2015/04/24 15:15:11 0000000000000000 82003441................................

Shared EMM Sky_V14_shared_emm.log
no saved EMM's Global EMM Sky_V14_global_emm.log
no saved EMM's

das ist zu sehen und was soll das bedeuten?

- - - - - - - - - -

oscam startbefehl ausführbar machen.

chmod a+rx /etc/init.d/oscam

aber das is ja nur um oscam überhaupt zu starten oder?

 

[Brabirl]

AW: Oscam Datei aktualisieren

nach strom entfernung heist es dann im status vom reader no active entilements found

 

[4gx35]

AW: Oscam Datei aktualisieren

dass du heute ein emm 8200 34 bekommen hast,
da stehen demnächst noch mehr drin, aber doppelte werden nicht angezeigt,
wenn du das emm anklickst, wird es ins obere feld kopiert (jetzt aber nicht schreiben)

irgendwo gibt es bestimmt ein script mit oscam start stop, ist auf receiver ja auch in usr/sript vorhanden ,
aber da müssen andere helfen,
ob es nur am reader liegt, dass karte nach kaltstart nicht gelesen wird, kannst du ohne anderen reader kaum testen

was ist denn dein server, ein alter thin client, der viel strom verbraucht oder ein kompletter pc ?

 

[Brabirl]

AW: Oscam Datei aktualisieren

kompletter pc

könntest dir evtl. mal die
oscam. conf anschauen

[global]
serverip = 192.168.2.100
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 200
preferlocalcards = 1
dropdups = 1

[anticasc]
enabled = 1
numusers = 1

[cs357x]
port = 25000

[cccam]
port = 50000
nodeid = 08336B2F10C513DE
version = 2.3.0

[webif]
httpport = 16002
httphelplang = de
httpallowed = 127.0.0.1,192.168.2.1-255.255.255.255

hab gelesen mal sollte saveinithistory = mit 0 oder 1 machen evtl. hilft das?

 

[4gx35]

AW: Oscam Datei aktualisieren

sieh mal im oscam webif unter config nach, das gibt es wohl nicht mehr ?
wait for cards oder mit extra delay ausprobieren ???

ansonsten kenne ich das problem überhaupt nicht

 

[Brabirl]

AW: Oscam Datei aktualisieren

[TABLE="class: config"]
[TR]
[TD]Wait for cards:[/TD]
[TD] disable client logins while card-init [/TD]
[/TR]
[TR]
[TD]Wait for cards delay:[/TD]
[TD] ms[/TD]
[/TR]
[/TABLE]

- - - - - - - - - -

sorry wait for card delay 500ms

 

[Brabirl]

AW: Oscam Datei aktualisieren

hat keiner eine idee wegen kaltstart?

 

[kaiserkippel]

AW: Oscam Datei aktualisieren

Wenn du debian auf deinem Linux server hast würde ich dir raten IPC zu installieren. Bei ipc sind alle Konfigurationsvorlagen und Datei-Sammlungen, die zum CS nötig sind schon enthalten. Z.Bsp. auch ein script, welches ständig testet, ob oscam noch läuft, und es gegebenenfalls auch wieder restartet.

 

[Brabirl]

AW: Oscam Datei aktualisieren

da habe ich keine ahnung.
gibt es da eine anleitung dumme