AW: Oscam Cardock nach 10 Minuten Error
2014/10/05 09:29:11 68E720 r smargo [
smartreader] ATR: 3F FD 12 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/10/05 09:29:11 68E720 r smargo [
smartreader] Init card protocol T0, FI=1, F=372, D=2, N=2
2014/10/05 09:29:11 68E720 r smargo [
smartreader] Calculated work ETU is 90.56 us reader mhz = 534
2014/10/05 09:29:11 68E720 r smargo [
smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=2 T=0 inv=1 parity=ODD
2014/10/05 09:29:11 68E720 r smargo [
smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for
smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2014/10/05 09:29:12 68E720 r smargo [
smartreader] card system not supported
2014/10/05 09:29:12 68E720 r smargo [
smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/10/05 09:29:12 68E720 r smargo [
smartreader] card initializing error
Das zeigt mir der live log an ...
hier mein reader einstellung.
[reader]
label = smargo
description = smargo
protocol =
smartreader
device = SRv2;Serial:27272727
smargopatch = 1
caid = 098C
boxid = 12345678
ins7e11 = 12
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
mhz = 534
cardmhz = 369
group = 1
emmcache = 1,1,2
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
blockemm-bylen = 1
use_gpio = 1
cccreshare = 6
ndsversion = 2