gelöst Oscam Probleme

[trebeis]

Moin Gemeinde,

ich habe einen bzw. SF8008. Plötzlich funktioniert Oscam bei mir nicht mehr... Kann da mal jemand drüberschauen?

Spoiler: Log

2024/10/02 18:02:37 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11581 (arm-oe-linux-gnueabi)


2024/10/02 18:02:37 00000000 s (main) System name = Linux


2024/10/02 18:02:37 00000000 s (main) Host name = sf8008


2024/10/02 18:02:37 00000000 s (main) Release = 4.4.35


2024/10/02 18:02:37 00000000 s (main) Version = #1 SMP Mon Dec 24 06:39:12 UTC 2018


2024/10/02 18:02:37 00000000 s (main) Machine = armv7l


2024/10/02 18:02:37 00000000 s (main) Stb model = dm8000


2024/10/02 18:02:37 00000000 s (main) Stb boxtype = sf8008


2024/10/02 18:02:37 00000000 s (main) creating pidfile /var/tmp/oscam-stable.pid with pid 2486


2024/10/02 18:02:37 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0


2024/10/02 18:02:37 00000000 s (config) userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled


2024/10/02 18:02:37 00000000 s (main) signal handling initialized


2024/10/02 18:02:37 00000000 s (config) 5 provid's loaded


2024/10/02 18:02:37 00000000 s (config) 30 service-id's loaded in 0 ms


2024/10/02 18:02:37 00000000 s (led) LED support is not active. Can't detect machine type.


2024/10/02 18:02:37 00000000 s (net) cccam: initialized (fd=5, port=40000)


2024/10/02 18:02:37 00000000 s (reader) reader0_hd+_hd02 [internal] creating thread for device /dev/sci0


2024/10/02 18:02:37 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms


2024/10/02 18:02:37 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms


2024/10/02 18:02:37 6E2A3B73 c (client) plain dvbapi-client granted (dvbapiau, au=auto (7 reader))


2024/10/02 18:02:37 6E2A3B73 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-stable/oscam.ccache


2024/10/02 18:02:37 33F58A9E h (webif) webif: decompressed 173458 bytes back into 414496 bytes


2024/10/02 18:02:37 33F58A9E h (webif) HTTP Server running. ip=:: port=8888


2024/10/02 18:02:37 6E2A3B73 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 38 (oscam limit is 64)


2024/10/02 18:02:37 6E2A3B73 c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 16


2024/10/02 18:02:38 467ED2EB r (reader) reader0_hd+_hd02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)


2024/10/02 18:02:38 467ED2EB r (reader) reader0_hd+_hd02 [internal] Reader sci internal, detected box type: sf8008


2024/10/02 18:02:38 7F92C6BE c (client) encrypted cccam-client 192.168.100.150 granted (xxxxx, au=off)


2024/10/02 18:02:38 6E2A3B73 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CEA PROVID: 000000


2024/10/02 18:02:38 6E2A3B73 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19EA PROVID: 000000


2024/10/02 18:02:38 6E2A3B73 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09C4 ECM_PID: 1BEA PROVID: 000000


2024/10/02 18:02:38 6E2A3B73 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1AEA PROVID: 000000


2024/10/02 18:02:38 6E2A3B73 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1860 ECM_PID: 1EEA PROVID: 000000


2024/10/02 18:02:38 6E2A3B73 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: 1DEA PROVID: 000000


2024/10/02 18:02:38 6E2A3B73 c (dvbapi) Demuxer 0 ecmpid 6 CAID: 098D ECM_PID: 18EA PROVID: 000000


2024/10/02 18:02:38 6E2A3B73 c (dvbapi) Demuxer 0 ecmpid 7 CAID: 186D ECM_PID: 1DEB PROVID: 000000


2024/10/02 18:02:38 6E2A3B73 c (dvbapi) Demuxer 0 ecmpid 8 CAID: 1842 ECM_PID: 1CEB PROVID: 000000


2024/10/02 18:02:38 6E2A3B73 c (dvbapi) Demuxer 0 ecmpid 9 CAID: 4B64 ECM_PID: 1CEB PROVID: 000000


2024/10/02 18:02:38 6E2A3B73 c (dvbapi) Demuxer 0 ecmpid 10 CAID: 4AF4 ECM_PID: 17EA PROVID: 000001


2024/10/02 18:02:38 6E2A3B73 c (dvbapi) Demuxer 0 ecmpid 11 CAID: 09F0 ECM_PID: 16EA PROVID: 000000


2024/10/02 18:02:38 6E2A3B73 c (dvbapi) Demuxer 0 found 12 ECM pids and 4 STREAM pids in CA PMT


2024/10/02 18:02:38 6E2A3B73 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!


2024/10/02 18:02:38 467ED2EB r (reader) reader0_hd+_hd02 [internal] card detected


2024/10/02 18:02:42 7F92C6BE c (ecm) xxxxx (P: 1843:000000:EF14:0000:0000: #ECM_L:89 #CW=00000000000000000000000000000000 HOP:00): rejected group (0 ms) - ntv HD (no matching reader)


2024/10/02 18:02:42 7F92C6BE c (ecm) xxxxx (P: 1830:000000:EF14:0000:0000: #ECM_L:92 #CW=00000000000000000000000000000000 HOP:00): rejected group (0 ms) - ntv HD (no matching reader)


2024/10/02 18:02:43 6E2A3B73 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!


2024/10/02 18:02:45 467ED2EB r (reader) reader0_hd+_hd02 [internal] Error:Sci_Reset ioctl(IOCTL_SET_RESET) failed.(1:Operation not permitted)


2024/10/02 18:02:45 467ED2EB r (reader) reader0_hd+_hd02 [internal] Deactivating card


2024/10/02 18:02:47 71B5AC50 c (client) encrypted cccam-client 192.168.100.154 granted (wohn, au=off)


2024/10/02 18:02:47 71B5AC50 c (ecm) wohn (P: 1843:000000:EF76:0000:0000: #ECM_L:89 #CW=00000000000000000000000000000000 HOP:00): rejected group (0 ms) - kabel eins HD (no matching reader)


2024/10/02 18:02:47 6E2A3B73 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!


2024/10/02 18:02:51 467ED2EB r (reader) reader0_hd+_hd02 [internal] Error:Sci_Reset ioctl(IOCTL_SET_RESET) failed.(1:Operation not permitted)


2024/10/02 18:02:51 467ED2EB r (reader) reader0_hd+_hd02 [internal] Deactivating card


2024/10/02 18:02:52 6E2A3B73 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!


2024/10/02 18:02:57 71B5AC50 c (ecm) wohn (P: 1843:000000:EF76:0000:0000: #ECM_L:89 #CW=00000000000000000000000000000000 HOP:00): rejected group (0 ms) - kabel eins HD (no matching reader)


2024/10/02 18:02:57 6E2A3B73 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!


2024/10/02 18:02:58 467ED2EB r (reader) reader0_hd+_hd02 [internal] Error:Sci_Reset ioctl(IOCTL_SET_RESET) failed.(1:Operation not permitted)


2024/10/02 18:02:58 467ED2EB r (reader) reader0_hd+_hd02 [internal] Deactivating card


2024/10/02 18:02:58 7F92C6BE c (ecm) xxxxx (P: 1843:000000:EF14:0000:0000: #ECM_L:89 #CW=00000000000000000000000000000000 HOP:00): rejected group (0 ms) - ntv HD (no matching reader)


2024/10/02 18:03:02 6E2A3B73 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!


2024/10/02 18:03:04 467ED2EB r (reader) reader0_hd+_hd02 [internal] Error:Sci_Reset ioctl(IOCTL_SET_RESET) failed.(1:Operation not permitted)


2024/10/02 18:03:04 467ED2EB r (reader) reader0_hd+_hd02 [internal] Deactivating card


2024/10/02 18:03:07 6E2A3B73 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!


2024/10/02 18:03:07 7F92C6BE c (ecm) xxxxx (P: 1843:000000:EF14:0000:0000: #ECM_L:89 #CW=00000000000000000000000000000000 HOP:00): rejected group (0 ms) - ntv HD (no matching reader)


2024/10/02 18:03:11 467ED2EB r (reader) reader0_hd+_hd02 [internal] Error:Sci_Reset ioctl(IOCTL_SET_RESET) failed.(1:Operation not permitted)


2024/10/02 18:03:11 467ED2EB r (reader) reader0_hd+_hd02 [internal] Deactivating card


2024/10/02 18:03:12 6E2A3B73 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!


2024/10/02 18:03:12 71B5AC50 c (ecm) wohn (P: 1843:000000:EF76:0000:0000: #ECM_L:89 #CW=00000000000000000000000000000000 HOP:00): rejected group (0 ms) - kabel eins HD (no matching reader)

Dankeschön!

Einen schönen Feiertag euch morgen!

 

[MKLST2]

Poste oscam.user, oscam.conf und oscam.server in Spoilern.

 

[trebeis]

Sorry, vergessen!

Edit 18:22: conf bearbeitet

Spoiler: conf

# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11715
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /tmp/oscam.log
nice = -1
waitforcards = 0
readerrestartseconds = 1
lb_mode = 2
lb_save = 100
lb_nbest_readers = 2
lb_nfb_readers = 2
lb_min_ecmcount = 3
lb_reopen_seconds = 120
lb_reopen_invalid = 0
lb_force_reopen_always = 1
lb_retrylimit = 500
lb_stat_cleanup = 24
lb_max_readers = 4
ecmfmt = P: c:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000

[cccam]
port = 40000
nodeid = F6A07A6B10FD15BC
version = 2.3.2

[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
request_mode = 1
delayer = 60
ecminfo_type = 4
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1

[webif]
httpport = 8888
httprefresh = 10
httppollrefresh = 10
httphidetype = sh
httppiconsize = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255
http_status_log = 1

Spoiler: user

# oscam.user generated automatically by Streamboard OSCAM 1.20_svn SVN r11715
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = dvbapiau
pwd = dvbapiau
keepalive = 1
au = 1
group = 1,2,3,4,5,6,7,8,9,10,64

[account]
user = wohn
pwd = testpw
description = wohn
group = 1

Spoiler: server

[reader]
label = reader0_hd+_hd02
enable = 1
protocol = internal
device = /dev/sci0
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2

### Optionale Parameter:
blockemm-g = 1 # Manche Karten erhalten eine hohe Anzahl an globalen EMMs, die zu einem Ruckeln des Bildes führen können. Diese Option blockt diese Art der EMMs.

### bis SVN 9099 die folgenden Einstellungen verwenden, hierzu die # vor den Zeilen entfernen.
#mhz = 450
#cardmhz = 368

[reader]
label = MymGcAmD
enable = 0
protocol = newcamd
device = Host,Port
key = 0102030405060708091011121314
user = User
password = Passwd
inactivitytimeout = -1
disableserverfilter = 1
connectoninit = 1
group = 1
audisabled = 1


[reader]
label = MyCcCam
enable = 0
protocol = cccam
device = Host,Port
user = User
password = Passwd
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 2
cccversion = 2.0.11
cccmaxhops = 1 # dont use higher than 3 !!!
dropbadcws = 1
ccckeepalive = 1
cccwantemu = 1



[reader]
label = MyCcCam_2
enable = 0
protocol = cccam
device = Host,Port
user = User
password = Passwd
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 3
cccversion = 2.0.11
cccmaxhops = 1 # dont use higher than 3 !!!
dropbadcws = 1
ccckeepalive = 1
cccwantemu = 1


[reader]
label = MyCcCam_3
enable = 0
protocol = cccam
device = Host,Port
user = User
password = Passwd
inactivitytimeout = -1
reconnecttimeout = 10
cacheex_block_fakecws = 1
group = 4
cccversion = 2.3.0
cccmaxhops = 1 # dont use higher than 3 !!!
dropbadcws = 1
ccckeepalive = 1
cccwantemu = 1


[reader]
label = emulator
enable = 0
protocol = emu
device = emulator
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 5
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE



[reader]
label = Clever
enable = 0
protocol = internal
device = /dev/sci0
detect = cd
caid = 0B00
Ident = 0B00:000000
pincode = 0000
autospeed = 0
mhz = 357
cardmhz = 357
group = 6

 

[Derek Buegel]

Kann es sein, das die Karte abgelaufen ist?
Entitlements? (rechts auf Status)

2024/10/02 18:03:04 467ED2EB r (reader) reader0_hd+_hd02 [internal] Deactivating card

 

[trebeis]

HD Plus wird immer Mitte des Monats aktiviert und ich habe nochmal eine Freischaltung drauf gespielt....

Kann die Karte kaputt gehen? Ist bereits über 10 Jahre alt

 

[Smiley007]

Die Karte wird nicht eingelesen.

Karte ziehen, vorsichtig reinigen und wieder einstecken, Oscam neu starten

Oscam Start Log posten

 

[trebeis]

Krass! Daran hat es gelegen!

Danke dir!