Nun irritiert mich im webif von oscam die Meldung "card activation error"

[tribual]

Hi!

Hab ne V14 in der fritte mit oscam am laufen. Lief bisher bestens. Geändert hab ich seither nix. Nun hab ich verpennt die Karte mit emms zu füttern und nun ist sie dunkel. Soweit ja an sich nicht schlimm. Einfach neu freischalten lassen.

Nun irritiert mich im webif von oscam die Meldung "card activation error"

Ist das normal bei abgelaufener karte? Also einfach neu freischalten?

Danke und Gruß

tribual

 

[supraracer]

AW: Laber Thema zu: Verlängerung der "neuen" V14 mit OScam (nach Erstfreischaltung)

Bei "card activation error" wird die Karte nicht korrekt in OScam eingelesen. Auch wenn alle Entis abgelaufen sind muss im WebIF "CARDOK" stehen.
Am besten einen eigenen Thread aufmachen und alle OScam Configs mit einem OScam Log ab Start posten.

-supraracer

 

[tribual]

AW: Nun irritiert mich im webif von oscam die Meldung "card activation error"

Ich frage mich, warum die Karte nicht mehr korrekt eingelesen wird. Hab absolut nichts geändert und alles lief bestens, bis die Karte eben dunkel wurde. Und nun dieser Fehler.

Test nun schon den ganzen Tag an den configs, oscam Versionen usw...

NIX! Ist doch merkwürdig?

Werd mal versuchen nachher die configs und das log zu Posten, ist aber etwas schwierig von Handy aus. Hab gerade keinen Rechner in der Nähe.

Danke und Gruß

 

[supraracer]

AW: Nun irritiert mich im webif von oscam die Meldung "card activation error"

Ich kenne das Problem mit der V14 in Verbindung mit dem Smargo am Debian Server. Bei Fritzboxen sollen es tw. ja noch schlimmer sein, nachdem was man hier so liest.

-supraracer

 

[tribual]

AW: Nun irritiert mich im webif von oscam die Meldung "card activation error"

So. Ich fang mal an mit den Daten und werd das ganze so schnell wie möglich komplettieren.

- FritzBox 7141 mit Freetz 11731M und TBflex
- V14 Karte
- Smartmouse 2
- aktiver USB Hub mit 8GB USB Stick
- Oscam*modernwebif-svn1278-fritz71xx-webif-libusb_st
- FritzBox ist auch für DSL und Tel zuständig

Spoiler

2015/01/11 12:48:10 0 s >> OSCam << cardserver started, version 1.20-modern_svn, build r1278 (mipsel-linux-uclibc-libusb)
2015/01/11 12:48:10 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3993
2015/01/11 12:48:10 0 s services reloaded: 0 services freed, 4 services loaded, rejected 0
2015/01/11 12:48:10 0 s userdb reloaded: 7 accounts loaded, 0 expired, 7 disabled
2015/01/11 12:48:10 0 s signal handling initialized
2015/01/11 12:48:10 0 s 137 service-id's loaded in 15 ms
2015/01/11 12:48:10 0 s 165 tier-id's loaded
2015/01/11 12:48:10 0 s 161 provid's loaded
2015/01/11 12:48:10 0 s cccam: initialized (fd=6, port=XX000)
2015/01/11 12:48:10 0 s SkyGermany [mouse] creating thread for device /dev/ttyUSB0
2015/01/11 12:48:10 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/01/11 12:48:10 0 s waiting for local card init
2015/01/11 12:48:10 557C50 h webif: decompressed 184084 bytes back into 407940 bytes
2015/01/11 12:48:10 557C50 h HTTP Server running. ip=:: port=XXXXX
2015/01/11 12:48:10 552C20 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 82999
2015/01/11 12:48:10 552C20 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 85394
2015/01/11 12:48:10 552C20 r SkyGermany [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/01/11 12:48:11 552C20 r SkyGermany [mouse] card detected
2015/01/11 12:48:11 552C20 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 113670
2015/01/11 12:48:12 552C20 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 89743
2015/01/11 12:48:13 552C20 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 89844
2015/01/11 12:48:15 552C20 r SkyGermany [mouse] Error activating card.
2015/01/11 12:48:15 552C20 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 87859
2015/01/11 12:48:16 552C20 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 90550
2015/01/11 12:48:18 552C20 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 89718
2015/01/11 12:48:19 552C20 r SkyGermany [mouse] Error activating card.
2015/01/11 12:48:19 552C20 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 87229
2015/01/11 12:48:21 552C20 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 90040
2015/01/11 12:48:22 552C20 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 92966
2015/01/11 12:48:23 552C20 r SkyGermany [mouse] Error activating card.
2015/01/11 12:48:23 552C20 r SkyGermany [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/01/11 12:48:23 552C20 r SkyGermany [mouse] card initializing error
2015/01/11 12:48:24 0 s init for all local cards done
2015/01/11 12:48:24 0 s anti cascading disabled

Spoiler

[rTBflex 3.1
label = SkyGermany
description =
enable = 1
protocol = mouse
device = /dev/ttyUSB0
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
readnano =
services = skygermany,!skysport,hd+,sky_all
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
caid = 098C
atr =
boxid = 12345678
boxkey =
rsakey =
ins7e =
ins7e11 = 15
ins2e06 =
fix07 = 1
fix9993 = 0
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 357
cardmhz = 357
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 0,0,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = 0
ccchop = 2
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0

[reader]
label = v14
description =
enable = 0
protocol = mouse
device = /dev/ttyUSB0
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
caid = 098C
atr =
boxid = 12345678
boxkey =
rsakey =
ins7e =
ins7e11 = 15
ins2e06 =
fix07 = 1
fix9993 = 0
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist = 098C:98,9B,97,57,91
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 357
cardmhz = 357
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 0
saveemm-u = 1
saveemm-s = 0
saveemm-g = 0
blockemm-bylen = 0-38,40,42-44,65-124,126-127,139-255
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 2
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0

Spoiler

[account]
disabled = 1
user = test01
pwd = XXXXX
description =
hostname =
caid = 098C
uniq = 0
sleepsend = 0
failban = 0
monlevel = 4
sleep = 0
suppresscmd08 = 0
umaxidle = 0
keepalive = 0
au = 1
emmreassembly = 2
expdate =
allowedprotocols =
allowedtimeframe =
betatunnel =
group = 1
services = skygermany,skysport,hd+,sky_all
preferlocalcards = -1
ident =
chid =
class =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_drop_csp = 0
cacheex_allow_request = 0
no_wait_time = 0
cacheex_allow_filter = 1
cccmaxhops = 10
cccreshare = -1
cccignorereshare = -1
cccstealth = -1
fakedelay = -1
numusers = -1
penalty = -1
acosc_max_active_sids = -1
acosc_zap_limit = -1
acosc_penalty = -1
acosc_penalty_duration = -1
acosc_delay = -1
lb_nbest_readers = -1
lb_nfb_readers = -1
lb_nbest_percaid =
cwc_disable = 0

Spoiler

#oscam.conf generated automatically by Streamboard OSCAM 1.20-modern_svn SVN r1278
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
disablelog = 0
loghistorysize = 4096
serverip = ::
logfile = /var/tbmodlog/oscam.log
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
fallbacktimeout_percaid =
clientmaxidle = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = -1
maxlogsize = 500
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 1
block_same_name = 1
usrfile =
mailfile =
cwlogdir =
emmlogdir = /var/media/ftp/uStor01/action_log/
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 30
lb_reopen_invalid = 1
lb_force_reopen_always = 0
lb_retrylimit = 0
lb_stat_cleanup = 336
lb_max_readers = 0
lb_auto_betatunnel = 1
lb_auto_betatunnel_mode = 0
lb_auto_betatunnel_prefer_beta= 50
lb_savepath =
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_auto_timeout = 0
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300
double_check_caid =
ecmfmt =
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
double_check = 0

[cache]
delay = 0
max_time = 15
max_hit_time = 15
wait_time =
cacheex_mode1_delay =
cacheexenablestats = 0
csp_port = 0
csp_serverip = 0.0.0.0
csp_ecm_filter =
csp_allow_request = 1
csp_allow_reforward = 0
cacheex_cw_check =
wait_until_ctimeout = 0
cwcycle_check_enable = 0
cwcycle_check_caid =
cwcycle_maxlist = 500
cwcycle_keeptime = 15
cwcycle_onbad = 1
cwcycle_dropold = 1
cwcycle_sensitive = 4
cwcycle_allowbadfromffb = 0
cwcycle_usecwcfromce = 0

[cccam]
port = xxxxx
serverip = 0.0.0.0
nodeid = B9AE7147109B14FE
version = 2.3.0
reshare = 1
reshare_mode = 4
ignorereshare = 0
forward_origin_card = 0
stealth = 0
updateinterval = 240
minimizecards = 0
keepconnected = 1
recv_timeout = 2000

[webif]
httpport = xxxx
serverip = 0.0.0.0
httpuser = Xxxx
httppwd = xxxx
httpcss =
httpjscript =
httpscript =
httptpl = /var/media/ftp/uStor01/action_log/picons/
httppiconpath =
httphelplang = de
httplocale =
http_prepend_embedded_css = 0
httprefresh = 10
httppollrefresh = 0
httphideidleclients = 0
httphidetype = sh
httpshowpicons = 1
httppiconsize = 45
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 0
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 0.0.0.0-255.255.255.255
httpreadonly = 0
httpsavefullcfg = 1
httpoverwritebakfile = 0
httpcert =
httpforcesslv3 = 0
httpdyndns =
aulow = 30
hideclient_to = 25
httposcamlabel = Oscam
http_status_log = 1

Sollte noch was fehlen, einfach melden. Dann reiche ich das nach.

Gruß

 

[cojo]

AW: Nun irritiert mich im webif von oscam die Meldung "card activation error"

als erstes ändere das httpsavefullcfg = 1 mal so ab httpsavefullcfg = 0 ,speichern und starte die Fritz neu,dann sollten da weniger sachen zu sehen ein und du postest es nochmal oder editierst dein post,dann wird es übersichtlicher

 

[tribual]

AW: Nun irritiert mich im webif von oscam die Meldung "card activation error"

Hab ich getan. Sieht aber leider alles genauso aus. Hat sich nichts geändert.

 

[Zwenny]

AW: Nun irritiert mich im webif von oscam die Meldung "card activation error"

ändere mal eine Parameter, speichere und stell ihn dann wieder zurück.

 

[tribual]

AW: Nun irritiert mich im webif von oscam die Meldung "card activation error"

Ändert sich auch nichts. Ist schon komisch.

 

[dodo83]

AW: Nun irritiert mich im webif von oscam die Meldung "card activation error"

dazu per WebIf mal auf Reader bearbeiten gehen und abspeichern, das gleiche bei den Usern
danach sollten die Configs schlanker aussehen wenn du auf FILES gehst

 

[tribual]

AW: Nun irritiert mich im webif von oscam die Meldung &amp;quot;card activation error&amp;quot;

OK. Das hat geklappt. Werde die files nachher nachreichen. Danke schon mal hierfür!

oscam.conf:

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-modern_svn SVN r1278
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /var/tbmodlog/oscam.log
nice = -1
maxlogsize = 500
emmlogdir = /var/media/ftp/uStor01/action_log/

[cache]
csp_serverip = 0.0.0.0

[cccam]
port = XXXXX
serverip = 0.0.0.0
nodeid = B9AE7147109B14FE
version = 2.3.0
reshare = 1

[webif]
httpport = XXXXX
serverip = 0.0.0.0
httpuser = testuser
httppwd = test001
httptpl = /var/media/ftp/uStor01/action_log/picons/
httphelplang = de
httprefresh = 10
httppollrefresh = 0
httphidetype = sh
httpshowpicons = 1
httppiconsize = 45
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 0.0.0.0-255.255.255.255
httposcamlabel = Oscam
http_status_log = 1

oscam.user:

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.20-modern_svn SVN r1278
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
disabled = 0
user = testuser
pwd = test001
description = Das bin ich
caid = 098C
monlevel = 4
umaxidle = 0
au = 1
group = 1
services = skygermany,hd+,sky_all

oscam.server:

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-modern_svn SVN r1278
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = SkyGermany
protocol = mouse
device = /dev/ttyUSB0
services = skygermany,!skysport,hd+,sky_all
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
cccreshare = 0
ccchop = 2

oscam.version:

Spoiler

Unix starttime: 1420980663
Starttime: 11.01.2015 13:51:03
Version: oscam-1.20-modern_svn-r1278
Compiler: mipsel-linux-uclibc-libusb
ConfigDir: /mod/external/mod/etc/conf/oscam.config/
WebifPort: XXXXX

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: no
DVB API support: no
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: yes

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: no
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: no
cardreader_stinger: yes

 

[dodo83]

AW: Nun irritiert mich im webif von oscam die Meldung "card activation error"

welcher Reader? wie ist dieser eingestellt?
poste mal das log vom einlesen der Karte

wozu die Services?

services = skygermany,hd+,sky_all

ein mal Skygermany, dann sky_all, im Reader hast du noch einen negativen !skysport
völlig unübersichtlich

 

[tribual]

AW: Nun irritiert mich im webif von oscam die Meldung "card activation error"

Reader ist die smartmouse 2 und für die v14 eingestellt, also oben, unten, unten. Log vom einlesen der Karte sollte doch im log vom oscamstart auf Seite 1 enthalten sein, oder?

Geht es auch ohne services? Wusste ich nicht. Bisher lief es ja so ohne Probleme. Hab das nur mit services unterteilt, weil normal noch ne S02 von meiner Solo2 als Cccam proxy mitläuft.

 

[dodo83]

AW: Nun irritiert mich im webif von oscam die Meldung "card activation error"

poste bitte das log mit deiner jetzigen Einstellung
ansonsten Easymouse so einstellen:

Spoiler

oben unten oben oben

den Reader dazu:

Spoiler

[COLOR=#333333][reader][/COLOR]
[COLOR=#333333]label = SkyGermany[/COLOR]
[COLOR=#333333]protocol = mouse[/COLOR]
[COLOR=#333333]device = /dev/ttyUSB0[/COLOR]
[COLOR=#333333]caid = 098C[/COLOR]
[COLOR=#333333]boxid = 12345678[/COLOR]
[COLOR=#333333]ins7e11 = 15
[/COLOR]mhz = 600
[COLOR=#333333]detect = cd[/COLOR]
[COLOR=#333333]group = 1[/COLOR]
[COLOR=#333333]blockemm-unknown = 1[/COLOR]
[COLOR=#333333]blockemm-u = 1[/COLOR]
[COLOR=#333333]blockemm-s = 1[/COLOR]
[COLOR=#333333]blockemm-g = 1[/COLOR]
[COLOR=#333333]saveemm-unknown = 1[/COLOR]
[COLOR=#333333]saveemm-u = 1[/COLOR]
[COLOR=#333333]ndsversion = 2[/COLOR]

ohne services geht es auch, ja

 

[tribual]

AW: Nun irritiert mich im webif von oscam die Meldung "card activation error"

So. Hier mal das log mit den jetzigen Einstellungen:

Spoiler

015/01/11 20:19:03 0 s >> OSCam << cardserver started, version 1.20-modern_svn, build r1278 (mipsel-linux-uclibc-libusb)
2015/01/11 20:19:03 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3207
2015/01/11 20:19:03 0 s services reloaded: 0 services freed, 4 services loaded, rejected 0
2015/01/11 20:19:03 0 s userdb reloaded: 7 accounts loaded, 0 expired, 6 disabled
2015/01/11 20:19:03 0 s signal handling initialized
2015/01/11 20:19:03 0 s 137 service-id's loaded in 14 ms
2015/01/11 20:19:03 0 s 165 tier-id's loaded
2015/01/11 20:19:03 0 s 161 provid's loaded
2015/01/11 20:19:03 0 s cccam: initialized (fd=6, port=34000)
2015/01/11 20:19:03 0 s SkyGermany [mouse] creating thread for device /dev/ttyUSB0
2015/01/11 20:19:03 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/01/11 20:19:03 0 s waiting for local card init
2015/01/11 20:19:03 5543B8 h webif: decompressed 184084 bytes back into 407940 bytes
2015/01/11 20:19:03 5543B8 h HTTP Server running. ip=:: port=XXXXX
2015/01/11 20:19:03 54F568 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 88453
2015/01/11 20:19:04 54F568 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 90036
2015/01/11 20:19:04 54F568 r SkyGermany [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/01/11 20:19:05 54F568 r SkyGermany [mouse] card detected
2015/01/11 20:19:05 54F568 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 86667
2015/01/11 20:19:06 54F568 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 89998
2015/01/11 20:19:07 54F568 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 89964
2015/01/11 20:19:08 54F568 r SkyGermany [mouse] Error activating card.
2015/01/11 20:19:09 54F568 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 87740
2015/01/11 20:19:10 54F568 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 89648
2015/01/11 20:19:12 54F568 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 89857
2015/01/11 20:19:13 54F568 r SkyGermany [mouse] Error activating card.
2015/01/11 20:19:13 54F568 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 87742
2015/01/11 20:19:14 54F568 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 89889
2015/01/11 20:19:16 54F568 r SkyGermany [mouse] Buffers readed 0 bytes total time_us 88202
2015/01/11 20:19:17 54F568 r SkyGermany [mouse] Error activating card.
2015/01/11 20:19:17 54F568 r SkyGermany [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/01/11 20:19:17 54F568 r SkyGermany [mouse] card initializing error
2015/01/11 20:19:18 0 s init for all local cards done