NEWS! Python/Cobra 1.40!
Link ist nicht mehr aktiv.
Changes since version 1.31:
Link ist nicht mehr aktiv.
Changes since version 1.31:
DeltaFlashLoader 1.36 ( Link ist nicht mehr aktiv. | Link ist nicht mehr aktiv. | Link ist nicht mehr aktiv. | Link ist nicht mehr aktiv. )
Changes since version 1.35:
In-CAM Key Editor
The in-CAM key editor is enabled only when flashing a key file with DeltaFlashLoader version 1.36 or higher. If a *.key (softcam.key, deltacam.key, …) has previously been flashed to the DeltaCam, the key editor is locked in order to prevent the reading back of pre-programmed third party keys. The *.key file has to be flashed again in order to unlock the in-CAM key editor.
Philips TV
Don’t forget to enable the “Alternative compatibility mode” in the process of flashing the Python/Cobra firmware when using the DeltaCam in one of the problematic Philips TV sets that would not initialize the module otherwise.
Link ist nicht mehr aktiv. (for Cobra only)
Link ist nicht mehr aktiv.
Changes since version 1.31:
- Improved compatibility with Philips TVs (see notes below)
- Improved compatibility with certain headends (e.g.
Sie müssen registriert sein, um Links zu sehen.)
- Improved compatibility with certain Funcard images
- Fixed descrambling dropouts with channels that have a high ECM cycle time (for example Redlight)
- Fixed reading entitlements for ICE SmartCards in Irdeto mode
- Fixed reading entitlements for Conax SmartCards
Link ist nicht mehr aktiv.
Changes since version 1.31:
- Includes all changes from Python 1.40
- [NEW] In-CAM key editor - add/remove/edit keys via CAM menu (see notes below)
- Fixed wrong ECM PID selection with Constant CW
DeltaFlashLoader 1.36 ( Link ist nicht mehr aktiv. | Link ist nicht mehr aktiv. | Link ist nicht mehr aktiv. | Link ist nicht mehr aktiv. )
Changes since version 1.35:
- Option to lock (disable) the in-CAM key editing when flashing a key file
- Improved Linux compatibility by setting the low latency mode on the serial port
In-CAM Key Editor
The in-CAM key editor is enabled only when flashing a key file with DeltaFlashLoader version 1.36 or higher. If a *.key (softcam.key, deltacam.key, …) has previously been flashed to the DeltaCam, the key editor is locked in order to prevent the reading back of pre-programmed third party keys. The *.key file has to be flashed again in order to unlock the in-CAM key editor.
Philips TV
Don’t forget to enable the “Alternative compatibility mode” in the process of flashing the Python/Cobra firmware when using the DeltaCam in one of the problematic Philips TV sets that would not initialize the module otherwise.
Link ist nicht mehr aktiv. (for Cobra only)
- ORF Digital (19.2°E)
- AustriaSat / MTV (19.2°E)
- TNTSAT (19.2°E)
- Digiturk (7.0°E)
- British Telecom (13.0°E)
- Globo TV International (13.0°E)
- RaiSat (13.0°E)
- Mezzo/MCM Belgique (13.0°E, 5.0°W)
- Skylink (23.5°E)
- GlobeCast FR/Bufallo (7.0°E)
- GlobeCast Espana (7.0°E, 30.0°W)
- SIC International (16.0°E)
- Bulsatcom (39.0°E)
- Aurora (156.0°E)
- RTN (95.0°W)
- Telefônica TV Digital Brasil (61.0°W)
- Hong Kong Cable TV (138.0°E)
- Multi Choice Cable TV
- Digital Cable Group
- Teleclub Swiss Cable
- NTL UK Cable TV
- NTL Ireland Cable TV
- Telewest Cable TV
- Cable Wireless
- Chorus Cable TV
- Munda Galicia Cable TV
- Cablecom Swiss Cable TV
Zuletzt bearbeitet: