Codierung BMW Codierwerte F10

[Lupin3te]

Re-Code for Dazzle Headlights (LED Adaptive Headlights like EU-Spec):

Spoiler

Change FA (VO) to Remove 5AP & 8S4 from VO

VO Code FRM Module

Read FA(VO)àActivate FA(VO)àRead SVTàRight-Click ECU & Select Code

VO Code KAFAS2 Module

Right-Click ECU & Select Code



Now Proceed to code FRM or KAFAS2 Modules … or re-code if coding was already present



Re-Code for Enhanced Bluetooth:



Change FA (VO) to Remove 6NH from VO & Add 6NS to VO

VO Code HU_NBT

Read FA(VO)àActivate FA(VO)àRead SVTàRight-Click ECU & Select Code



Now Proceed to code HU_NBT Module … or re-code if coding was already present



Re-Code for Sports Automatic Transmission:

Change FA (VO) to Remove 205 from VO & Add 2TB to VO

VO Code EGS, ICM, & KOMBI

Read FA(VO)àActivate FA(VO)àRead SVTàRight-Click ECU & Select Code

VO Code ICM

Right-Click ECU & Select Code

VO Code KOMBI

Right-Click ECU & Select Code



Now Proceed to code any Module above … or re-code if coding was already present

IF YOU NEED TO DO EITHER OF THE ABOVE … FOLLOW THE INSTRUCTIONS FOR “HOW TO CHANGE FA” in my BMW Coding Beginner’s Guide. This needs to be done FIRST … meaning before you perform FDL Coding or Changing Werte Values​

ACSM Module:



SeatBelt Reminder Lights off in Instrument Panel:

3000àGurtzustandsanzeige_Beifahrer_GFW_GZA_BF set to: nicht_aktiv

3000àGurtzustandsanzeige_Fahrer_GFW_GZA_FA set to: nicht_aktiv



Disable Welcome 3 Gongs:

3000 à Initialwarnung_GWF_IW set to: nicht_aktiv















SeatBelt Reminders/Sound OFF (Lines below depend on Build Date):

3000àSBR_BF_GWF_SBR_BF set to: nicht_aktiv

3000àSBR_FA_GWF_SBR_FA set to: nicht_aktiv

3000àSPW_BF set to: nicht_aktiv

3000àSPW_FA set to: nicht_aktiv

--OR--​

3000àSBR_PreWarning_Fahrer set to: nicht_aktiv

3000àSBR_PreWarning_Beifahrer set to: nicht_aktiv

3000àSeatBeltReminder_SBR_Fahrer set to: nicht_aktiv

3000à SeatBeltReminder_SBR_Beifahrer set to: nicht_aktiv



ASD Module:



Disable Active Sound Design (///M5 Only)

3000à Model Rangeà set to: F021



CAS Module:



Auto Start/Stop OFF by default

3000àTC_MSA_DEFAULT_OFF set to: aktiv – werte=01



Auto Start/Stop – Remember LAST Setting

3000àTC_MSA_MEMORY set to: aktiv – werte=01



Unlock all doors with engine off (Single-Pull Handles):

3002àER-KEYOUT_AUTOVR set to: aktiv – werte=01



Electronics off when door opened

3000àTC_LOGIC_KLR_OFF_DOOR set to: aktiv



Close Mirrors/Windows/SunRoof from FOB or CA

* ALSO REQUIRES 1 VALUE CHANGED IN FRM MODULE FOR THIS TO BE ACTIVATED *

3003àKOMFORTSCHLIESSUNG_FB set to aktiv – werte=00

3003àKOMFORTSCHLIESSUNG_PA set to aktiv – werte=00



Set Mirror Fold Delay Time

3003àKMFRT_SCHLIESSEN set to werte=00



Start Car by pushing button (hold brake not needed)

New Procedures is as mentioned:

• press once for iDrive and fuel pump
• press a second time and hold to crank engine

3000àTC_STARTLOCK_BRAKE set to: nicht_aktiv

3000àTC_STARTLOCK_DRIVINGREADINESS set to: nicht_aktiv



EGS Module:

Enable Launch Control

3000àLC set to: aktiv







FRM Module:



Angel-Eyes Full Brightness (with headights on)

3060àU_EFF_POL set to: wert_05__13,0V



Close Mirrors/Windows/SunRoof from FOB or CA

3020àASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN set to aktiv



Tilt Passenger Mirror farther down when in reverse

3020àASP_BORDSTEINAUTOMATIK_DELTA Change Werte to: 4B



Opening FRONT doors won’t interrupt windows:

3030àFH_TUER_AUF_STOP_MAUT set to: nickt_aktiv



Rear Tails & Angel Eyes on as DRL

3050àDRL_MODUS set to: drl_s



Fog Lights stay on w/ High Beams

3050àNSW_AUS_BEI_FL set to: nicht_aktiv



Ambiance Lighting controlled independent from Dimmer Switch

#### à AMBIENTE_NACHFUEHRUNG set to: nicht_aktiv



Ambiance Lighting Brightness Settings:


CS_AMB_BRIGHTNESS
Kommentar=Ambient brightness Obergrenze für die Umgebungshelligkeit
Comment = Ambient brightness Upper limit for the ambient brightness
Default Value = 64 (seeing as the below setting is a HEX value, thus I assume this setting is also in HEX, which makes this 100)

CS_AMB_MIN_BRIGHTNESS
Kommentar=Min Amb brightness Untergrenze für die Umgebungshelligkeit
Comment = Min Amb brightness Lower limit of the ambient brightness
Default Value = 0A (In decimal this is 10)

CS_AMB_MAX_OFFSET
Kommentar=Max amb brightness offset Helligkeit für PWM-Ausgang in Prozent physikalischen Wert 20% ... 80%
Comment = Max amb brightness offset Brightness for PWM output as a percentage physical value of 20% ... 80%
Default Value = 30



Brake-Force Flashing on Hard Braking:

3050àESS_ERSCHEINUNGSBILD set to: bremslicht blinkend – werte=02

3050àESS_ON_VERZ set to: US – werte=0A

3050àESS_GESCHW_SCHWELLE set to: US – werte=05



High-Beam Assistant – Auto-On:

3050àFLA_AUTO_AKTIV set to: automatisch

3050àFLA_VERBAUT set to: aktiv



Welcome Lights – Add Lights to Welcome Lights

Low Beam: 3050àWL_FUNKTION_AL set to: nicht_aktiv – werte=00

High Beam: 3050àWL_FUNKTION_FL set to: nicht_aktiv – werte=00

License Plate: 3050àWL_FUNKTION_KZL set to: hard_on – werte = 02

Fog Lights: 3050àWL_FUNKTION_NSW set to: hard_on – werte = 02

Tail Lights: 3050àWL_FUNKTION_SSL set to: hard_on – werte = 02



Code for LED Turn-Signal Bulb replace halogens (on Xenon Light Package for LCIs):

FRA_V_L_KALTUEBERWACHUNG set to: nicht_aktiv
FRA_V_L_WARMUEBERWACHUNG set to: nicht_aktiv
FRA_V_L_IS_LED set to: aktiv
FRA_V_R_KALTUEBERWACHUNG set to: nicht_aktiv
FRA_V_R_WARMUEBERWACHUNG set to: nicht_aktiv
FRA_V_R_IS_LED set to: aktiv



HKFM_LS Module:

* takes up to 30 minutes to begin working after coding *

Close/Open Trunk from Fob & Kick Panel

3010àSCH_FBD set to: aktiv – werte=01

3010àSCH_TOEHKI set to: aktiv – werte=01

3010àTASTER_FBD set to: aktiv – werte=01



HU_NBT or HU_CIC Module: (Not all available in CIC Headunit)



High-Beam Assistant – Auto-On

3000àHIGH_BEAM_ASSISTANT set to: aktiv



Set cell phone ringer as primary

3001àINBAND_RINGING set to: aktiv



Enable Siri Voice Control

3003àCE_DEVICE_SPEECH_RECOGNITION set to: aktiv



Disable Auto-Locking of Doors once begin driving

3000àDOOR_LOCK_AFTER_DRIVING_AWAY set to: nicht_aktiv



Enable ///M LapTmer

3000 à M_LAPTIMER set to: aktiv



Disable Active Sound Design (///M5 Only)

3000 à ASD_SOUND_OFF set to: aktiv



Enable Active Sound Design Configuration Menu (///M5 Only)

3000 à ASD_CONFIGURATION set to: aktiv

3000 à ASD_SOUND_4 set to: aktiv













Enable Sports Displays

3000àEFF_DYN_SPORT_CID set to: aktiv

3000àEFF_DYN_SPORT_UNIT set to: aktiv

* To change units displayed to be ft lb and hp

KOMBIà3008àDREHMOMENT set to: lb_ft (displays ft lb)

KOMBIà3008àLEISTUNG set to: ps (displays hp)



Enable Volume On-Screen Display:

3002àVOLUME_POPUP_DISPLAY set to: aktiv



Enable Turn Signals in HUD

3001àHUD_TURNSIGNAL set to: aktiv



DVD-in-Motion activated:

3000 à SPEEDLOCK_X_KMH_MAX Change werte to: FF

3000 à SPEEDLOCK_X_KMH_MIN Change werte to: FF

3000 à VIDEO_HANDBRAKE set to: nicht_aktiv

3000 à VIDEO_FRONT_LOCKED set to: nicht_aktiv

3000 à VIDEO_SPEEDLOCK_CONDITION set to: none=00



Change Navi Voice to British English

HU_CICà3000àVOICE_LANGUAGE_RR_US set to: aktiv

HU_NBTà3000àLANGUAGE_ENGLISH_UK set to: master

HU_NBTà3000àLANGUAGE_ENGLISH_US set to: nicht_aktiv



Navi Trip-Import

3000àNAVI_TRIP_IMPORT set to: aktiv



Navi Fuel-Stop Proposal Along Route

3000àNAVI_FUELSTOP_PROPOSAL set to: aktiv



Enable Video Files from USB

3000àENT_CODEC_XVID set to: aktiv

3000àENT_CODEC_XVCD set to: aktiv

3003àAPI_USB_VIDEO set to: both



Add GPS Current Location to Navi Menu Items

3000àNAVI_POSITION_MENU set to: aktiv



Add Turn-Signals to HUD

3000àHUD_TURNSIGNAL set to: aktiv



Add Weather Band Radio (CIC Only)

3002àRADIO_WEATHERBAND set to: aktiv



Enable the function of saving video files to NBT Hard Drive for play later

3000 à ENT_MC_VIDEO_SUPPORT set to: aktiv



Disable Office Function Speed Lock-Out

3000à OFFICE_MESSAGES_SPEEDLOCK_CONDITION set to: nicht_aktiv



Enable Full Text Lines in Office While Driving

3003 à PIM_DRIVING_TEXT_LENGTH set to: whole text_07



Disable Audible Chirp/Beep When Locking Car

3000 à ACOUSTICAL_LOCK_CONFIRM set to: nicht_aktiv



Enable Speech Input for E-Mail or SMS

3003 à SPEECH_2_TEXT set to: aktiv



Enable Time-Stamp Display for Call Log

3003 à TIMESTAMP_DISPLAY set to: aktiv



Add Temperature & PSI to tire monitor screen

3001àRDC_SAFETY set to: aktiv



Disable Legal Disclaimers

3001àLEGAL_DISCLAIMER_TIME set to: kein_ld

3001àMACRO_CAM_LEGALDISCLAIMER set to: kein_ld

3001àMACRO_NVICAM_LDISCLAIMER set to: kein_ld



Change i-Drive Animation to ///M Logo

3001àSTARTUP_EMBLEM set to: variant_01



Enable IPCE Web Server @ 172.16.222.1

3000àIPCE_WEBSERVER set to: aktiv



Enable WiFi Hot-Spot

(Need to install a DLNA/UPnP media sharing server on your laptop or phone to be able to use this)

3000àENT_MC_WLAN_STREAM_DMP_COVERART set to: aktiv

3000àENT_MC_WLAN_STREAM_DMP_VIDEO set to: aktiv

3000àENT_MC_WLAN_STREAM_DMP set to: aktiv

3003àWLAN_STATUS set to: aktiv

3003àWLAN_MODUS set to: ap

3003àWLAN_SIGNAL_STRENGTH set to: outdoor



Enable Developer Menu

3000 à ENTWICKLER_MENUE set to: aktiv 01



ICM Module: (Requires Further Testing)



Enable Blind-Spot Detection at LOWER Speeds

3000àHc2_i_CPar_Aktiv_v_low set to: 25 kmh

--OR--​

3000àHcSwcCPar_i_Hc2_Aktiv_v_low set to: 25 kmh



IHKA Module:



A/C System Remembers Last Setting

3000àOFF_MEMORY set to aktiv





Always Remember Air ReCirculating

3000àMEMORY_UMLUFT set to: aktiv



JBBF Module:



Opening REAR doors won’t interrupt windows:

3070àFH_TUER_AUF_STOP_MAUT set to nickt_aktiv



Disable Headlight Washers

3000 à SCHEINWERFERREINIGUNG set to: nicht_aktiv



Auto Wiper Sensitivity Increase

3530àRLS_FLC_SCHWELLWERT_SATZ_1 Change Werte to: 05

3530àRLS_FLC_SCHWELLWERT_SATZ_2 Change Werte to: 09

3530àRLS_FLC_SCHWELLWERT_SATZ_3 Change Werte to: 0D



Auto Light Sensitivity Increase

3530àRLS_DEF_FLC_SCHWELLWERT_SATZ set to: option chosen below
3530àRLS_FLC_SCHWELLWERT_SATZ set to: option chosenbelow

Options:
normal = mornal
empfindlich = sensitive
sehr_empfindlich = very sensitive
unempfindlich = insensitive



KAFAS2 Module:



High-Beam Assistant – Auto-On

3050àFLA_ON_OFF set to: aktiv



KOMBI Module:



Show Digital Speed in MPH in Cluster

3000àBC_DIGITAL_V set to: aktiv



Show Turn Signals in HUD

3008àHUD_PIA_BLINKER set to: aktiv

3000àBLINKER_HUD_ENABLE set to: aktiv



Enable GPS-Sync for Clock

3000àGPS_UHR set to: aktiv



Enable HUD for Entertainment & Phone List

* Adds checkbox under settings for HUD – Displayed Information Menu *

3000àHUD_ENTERTAINMENT_ENABLE set to: aktiv

3000àHUD_TELEFONANRUF_ENABLE set to: aktiv

3000àHUD_TELEFONBUCH_ENABLE set to: aktiv

3000àHUD_ENTERTAINMENTLIST set to: aktiv











PDC Module:



Enable Rear-View Camera at all Speeds

3009àD_SCHWELLE_2 Change werte to: FF

3009àV_SCHWELLE_2 Change werte to: FF



SZL Module:



Enable Paddle Shifters (for Retrofits)

3000 à Lenkrad_Schaltpaddles set to: aktiv



TRSVC Module:



Enable Side-View Cameras at all Speeds

3000àSV_Activate_Speed_Limit Change werte to: FF

3000àSV_Deactivate_Speed Change werte to: FF