rcm ohci-brcm.1: new USB bus registered, assigned bus number 6ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ohci-brcm ohci-brcm.2: Broadcom STB OHCI
ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-brcm ohci-brcm.3: Broadcom STB OHCI
ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to
linux-media@vger.kernel.org):
3151d14aa6e983aa36d51a80d0477859f9ba12af [media] media: remove __dev* an
notations
978ae2247fac3b330ecd1095823001d2c08c7efd [media] extract_xc3028.pl: fix
permissions
73ec66c000e9816806c7380ca3420f4e0638c40e [media] stv0900: Multistream su
pport
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS0: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bi
t)
brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Ha
mming ECC
Bad block table found at page 131008, version 0x07
Bad block table found at page 130944, version 0x07
nand_read_bbt: bad block at 0x000000700000
nand_read_bbt: bad block at 0x000001aa0000
nand_read_bbt: bad block at 0x0000030c0000
nand_read_bbt: bad block at 0x000006320000
nand_read_bbt: bad block at 0x000006b40000
nand_read_bbt: bad block at 0x000007fe0000
nand_read_bbt: bad block at 0x00000a780000
nand_read_bbt: bad block at 0x00000ad00000
nand_read_bbt: bad block at 0x00000bfa0000
nand_read_bbt: bad block at 0x00000c260000
nand_read_bbt: bad block at 0x00000de80000
nand_read_bbt: bad block at 0x00000e260000
nand_read_bbt: bad block at 0x00000e4e0000
Creating 4 MTD partitions on "brcmnand.0":
0x000001f00000-0x000010000000 : "rootfs"
0x000001f00000-0x000010000000 : "rootfs(redundant)"
0x000000200000-0x000000900000 : "kernel"
0x000000900000-0x000000a00000 : "mac"
UBI: attaching mtd0 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: max. sequence number: 115
UBI: attached mtd0 to ubi0
UBI: MTD device name: "rootfs"
UBI: MTD device size: 225 MiB
UBI: number of good PEBs: 1785
UBI: number of bad PEBs: 15
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 1785
UBI: number of PEBs reserved for bad PEB handling: 17
UBI: max/mean erase counter: 253/17
UBI: image sequence number: 122949808
UBI: background thread "ubi_bgt0d" started, PID 43
UBIFS: parse sync
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size: 222588928 bytes (217372 KiB, 212 MiB, 1753 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:14.
devtmpfs: mounted
Freeing unused kernel memory: 184k freed
INIT: version 2.88 booting
NET: Registered protocol family 10
procmk_init
dvb_bcm7356: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (vusolo2)
bcm7356: hotplug_callback():
Hotplug - status.connected 1:0
bcm7356: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
[GP]:brcm_pwm_init
73460012
BCM7356B2 CFE Build Date: Fri Nov 23 11:23:42 2012 Vuplus team
Copyright (C) Broadcom Corporation.
******************************************
Automatic startup canceled via Ctrl-C
******************************************
!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
CPU speed: 1305MHz
Total memory(0): 1024MB
DDR Freq: 800 MHz
DDR Mode: DDR3
DEV TECH: 2048MBIT
DDR Width: 32
Boot Device: NAND
Total flash: 256MB
Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
Saving shmoo values...
Saved shmoo values....
CFE initialized.
waiting for usb...done
checking usb
No Priority Usb
checking front key
FrontPanel Key : d1, 1
readFrontKey 1 1
Checking usbdisk0:/vuplus/solo2/force.update......NO
Checking usbdisk0:/vuplus/solo2/cfe_cfe_auto.bin......NO
Checking usbdisk0:/vuplus/solo2/root_cfe_auto.bin......NO
....NO
Checking usbdisk0:/vuplus/solo2/splash_cfe_auto.bin......NO
Checking usbdisk0:/vuplus/solo2/kernel_cfe_auto.bin......NO
Starting splash screen.
Found splash image - Width = 720 Height = 480
Non Interlaced Replace list 009f8100 0c800000Interlaced Replace list 009f86a0 0c
8005a0
CFE> PRINTENV
Invalid command: "PRINTENV"
Available commands: ts, info, set, loop, reboot, dir, macprog, macprog2, flash,
memtest, t, f, e, d, u, batch, go, load, save, boot, ephycfg, ping, ifconfig, sl
eep, waitusb, show, testenv, incenv, unsetenv, printenv, setenv, help
*** command status = -1
CFE> printenv
Variable Name Value
-------------------- --------------------------------------------------
BOOT_CONSOLE uart0
LINUX_PART_STARTAD 200000
LINUX_PART_SIZE 700000
LINUX_MACADDR_STARTA 900000
LINUX_MACADDR_SIZE 100000
SPLASH_PART_STARTAD d00000
SPLASH_PART_SIZE 200000
LINUX_FFS_STARTAD 1f00000
LINUX_FFS_SIZE e100000
SPLASH ENABLE
ETH0_PHY RGMII
ETH0_MDIO_MODE 1
ETH0_SPEED 1000
ETH0_PHYADDR probe
ETH0_HWADDR 00:1D:EC:00:48:53
DRAM0_SIZE 1024
FLASH_ECC_SCHEME Hamming
FLASH_TYPE NAND
FLASH_SIZE 256
CFE_VERSION 10.952.952
CHIP_PRODUCT_ID 73560012
CFE_BOARDNAME BCM97346
CFE_MEMORYSIZE 128
*** command status = 0
CFE> show devices
Device Name Description
------------------- ---------------------------------------------------------
uart0 16550 DUART at 0xB0406900 channel 0
uart_b0 16550 DUART B at 0xB0406940 channel 0
flash0.cfe New NAND flash at 00000000 offset 00000000 size 2048KB spar
e 256KB
flash0.kernel New NAND flash at 00000000 offset 00200000 size 7168KB spar
e 640KB
flash0.macadr New NAND flash at 00000000 offset 00900000 size 1024KB spar
e 128KB
flash0.nvram New NAND flash at 00000000 offset 00A00000 size 1024KB spar
e 128KB
flash0.virtual New NAND flash at 00000000 offset 00B00000 size 1024KB spar
e 128KB
flash0.kreserv New NAND flash at 00000000 offset 00C00000 size 1024KB spar
e 128KB
flash0.splash New NAND flash at 00000000 offset 00D00000 size 2048KB spar
e 640KB
flash0.initrd New NAND flash at 00000000 offset 00F00000 size 16384KB spa
re 7168KB
flash0.avail0 New NAND flash at 00000000 offset 01F00000 size 230400KB sp
are 2048KB
eth0 GENET Internal Ethernet at 0xB0430800
*** command status = 0
CFE>