Neuer Pingulux besitzer

[Alex]

AW: Neuer Pingulux besitzer

Moin,

Is natürlich von hier aus schwer zu sagen. Hast du auch schon mal versucht, Evolux zu flashen? LINK
Wird anders geflasht, steht aber alles im beiliegenden HowTo

 

[nicetolife]

AW: Neuer Pingulux besitzer

Moin Moin Ja das stimmt immer was zu berurteilen ,wenn man das nicht sieht ist immer blöd. Kenne das zu gut . Mich rufen sie ja auch immer wegen Computer Probs oder Sat probleme an .

Hatte meinen ersten rechner 1978 und auch mal gewerbe angemekdet gehabt mit satempfangsanlagen von 1990 bis 2000. Hatte zur der Zeit einen Motorradunfall ,habe dann gewerbe abgemeldet .
Lief eh nur nebenbei,hauptberuflich im Stahlbau gewessen .
Nein Evolux noch nicht versucht .
Mir machen da die Badblocks sorgen , das ebend der speicher defekt ist .

 

[Alex]

AW: Neuer Pingulux besitzer

Probier mal Evolux, da siehst du dann im Terminal-Fenster, wenn's viele Bad-Blocks sind.

 

[nicetolife]

AW: Neuer Pingulux besitzer

Ja werde ich mal machen , werde dann berichten .

 

[nicetolife]

AW: Neuer Pingulux besitzer

Gesagt getan .

Das kommt nun . Musste ihn ausschalten hang im load fest ..
DRAM: 128 MiB
NOR: 8 MiB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
IdentID :
Hit ESC to stop autoboot: 0

Loading from NAND 512MiB 3,3V 8-bit, offset 0x18000000

** Bad Magic Number 0xffffffff **
## Booting image at 80000000 ...
Bad Magic Number
## Ready for binary (ymodem) download to 0x80000000 at 115200 bps...
CCCCCCCCCCTimed out
xyzModem - Cksum mode, 0(SOH)/0(STX)/0(CAN) packets, 20 retries
## Total Size = 0x00000000 = 0 Bytes
## Ready for binary (ymodem) download to 0x80000000 at 115200 bps...
CCCCCCCCCCTimed out
xyzModem - Cksum mode, 0(SOH)/0(STX)/0(CAN) packets, 20 retries
## Total Size = 0x00000000 = 0 Bytes
## Ready for binary (ymodem) download to 0x80000000 at 115200 bps...
CCCCCCCCCC

Spark läuft

 

[nicetolife]

Das aus dem telnetlog

Writing data to block 2d20000
Writing data to block 2d40000
Writing data to block 2d60000
Writing data to block 2d80000
Writing data to block 2da0000
Writing data to block 2dc0000
Writing data to block 2de0000
Writing data to block 2e00000
Writing data to block 2e20000
Bad block at 2e20000, 1 block(s) from 2e20000 will be skipped
Writing data to block 2e40000
Writing data to block 2e60000
Writing data to block 2e80000
Writing data to block 2ea0000
Writing data to block 2ec0000
Writing data to block 2ee0000
Writing data to block 2f00000
Writing data to block 2f20000
Writing data to block 2f40000
Writing data to block 2f60000
Writing data to block 2f80000
Writing data to block 2fa0000
Writing data to block 2fc0000
Writing data to block 2fe0000
Writing data to block 3000000
Writing data to block 3020000
pwrite: Input/output error
Erasing failed write from 03020000-0303ffff
MEMERASE: Input/output error
Data was only partially written due to error
: Input/output error
copy your orig Bootargs to /storage/c/enigma2/myBootargs.txt
unlocking /dev/mtd0
locking /dev/mtd0
All Done!
We reboot in 10s and Evolux should booting with neutrino...

Moin
Und hast du jetzt noch eine Idee.

Gesendet von meinem Nexus S mit Tapatalk 2

 

[Alex]

AW: Neuer Pingulux besitzer

Ja sieht so aus, als hätte dei NAND - Flash ne Schuss wech

 

[nicetolife]

AW: Neuer Pingulux besitzer

so bin schonmal weiter .

Spoiler

U-Boot 1.3.1-g057e7c28 (Oct 21 2011 - 09:58:11) - stm23_0043

DRAM: 128 MiB
NOR: 8 MiB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
IdentID :
Hit ESC to stop autoboot: 3
Force command mode:Select boot (current boot system : enigma2):
1. spark(up key)
2. enigma2(down key)
3. RS232 Upgrade u-boot(left key)
4. Force into factory mode(right key)
Input Select:
set bootargs to bootargs_enigma2
Unprotecting Flash...
.. done
Un-Protected 2 sectors
Erasing Flash...
.. done
Erased 2 sectors
Writing to Flash...
........ done
Protecting Flash...
.. do
Protected 2 sectors 1 x16 devices at 0x
0n

Loading from NAND 512MiB 3,3V 8-bit, offset 0x18000000
Amd/Fujitsu Extended Query
Image Name: Linux-2.6.32.57_stm24_0210
Image Type: SuperH Linux Kernel Image (gzip compressed)
cfi_cmdset_0002: Disabling e
Data Size: 2414524 Bytes = 2.3 MiB.:11) - stm23_0043 - YW 1.0.021 Rel
Load Address: 80801000
Entry Point: 80802000
cm
## Booting image at 80000000 ...vailableM: 128 MiB
Image Name: Linux-2.6.32.57_stm24_0210R: 8 MiB
RedBoot partitio
Image Type: SuperH Linux Kernel Image (gzip compressed)
In: serial
Out: seri
Using ph
Data Size: 2414524 Bytes = 2.3 MiB
IdentID :
Load Address: 80801000
Creating 3 MTD par
Entry Point: 80802000
Creating 4 MTD partitions on "stm-nand-emi.0":
ddr}:${serverip}:${gatewayip}:${netmask}:LINUX7109:eth0ff bigphysarea=6000 stm-0x000000800000 : "Spark Kernel"

maceth=msglvl:0,phyaddr:1,watchdog:5000 nwhwconf=device:eth0,hwaddr:24:00:08:00:0x000018000000 : "Spark Rootfs"Ty


Linux version 2.6.32.57_stm24_0210 (pinky@asuslappy) (gcc version 4.5.2 20110124y_get_addr():
stmmac - user ID: 0x10, Synopsys ID: 0x33 (MB
(STMicroelectronics/Linux Base 4.5.2-78) (GCC) ) #1 PREEMPT Mon Jul 23 11:51:53
stb_id = 9080
No HW DMA feature register supported
CEST 2012
Boot params:49:07 Manufa
... MOUNT_ROOT_RDONLY - 00000001
ohci_hcd: USB 1.1 'Ope
... RAMDISK_FLAGS - 00000000 mode(right key)
... ORIG_ROOT_DEV - 00000200
stm-ehci
... LOADER_TYPE - 000000006.32.57_stm24_
... INITRD_START - 00000000
stm-ehci stm-ehci.0: new U
... INITRD_SIZE - 00000000umber 1
Booting machvec: sat7111
(Re)sta
Node 0: start_pfn = 0x40000B: scanning
STx7111 version 3.x
s
bpa2: partition 'bigphysarea' created at 0x48000000, size 32768 kB (0x02000000 B
usb usb2: configu
)t
bpa2: partition 'LMI_IO' created at 0x4a000000, size 98304 kB (0x06000000 B)mac_p
Node 0: start_pfn = 0x40000, low =
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 650240:1.0: 1 port detected
Normal 0x00040000 -
Kernel command line: console=ttyAS0,115200 root=/dev/mtdblock6 rw init=/b

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
IRQ : not used

PID hash t
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) 0001 RAM start at 0xbf400000 size 0x00400000size 0x700
PVR=04909200 CVR=60880000 PRR=00009a10
Dentry
I-cache : n_ways=2 n_sets
I-cache : n_ways=2 n_sets=
DM
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

I-cache : entry_mask=0x00003fe0 alias_ma
Hierarchical RCU implementation.
IRQ 140/fdma_dmac.0: IRQF
NR_IRQS:600 not guaran
Failed to enable clk CLKA_REF, ignoring
Failed to enable clk CLKA_PLL0LS, ignoringhe : n_ways=2 n_sets=512 way_incr=16384
console [ttyAS0] enabled
stm-fdm
sh_tmu: TMU0 used for clock events
[STM][PM-Sys]: ilc3 @ 4096
NET: Registered protocol family 16#########
bio: create slab <bio-0> at 0d protocol family 17ce###
SCSI subsystem initialized
lib80211: common
usbcore: registered new interface driver usbfs

eth0: PHY ID 00000000 at 2 IRQ 0
usbcore: registered new interface driver hub
usbcore: registered new device driver usb0000000 at 3 IRQ 0 (0:03)
DMA: Registering DMA API.bcore: registered new int
Switching to clocksource TMU1
eth0: PHY ID
NET: Registered protocol fam
RPC: Registered udp transport module.
TCP established hash table entrie
RPC: Registered tcp transport module.eth0: PHY ID 00000000 at 10 IRQ 0 (0:
RPC: Registered tcp NFSv4.1 backchannel transport module.D 00000000 at 17 IRQ 0 (0:11)ansport module.
[STM]: [PM]: Suspend support registered
eth0: PHY ID 00000000 at 18 IRQ 0 (0
Installing knfsd (copyright (C) 1996 okir@mona
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
Slow work thread p
fuse init (API version 7.13)21 IRQ 0 (0:15)
JFS: nTxBlock = 909, nTxLock = 7272k thread pool: Ready
msgmni has been set to 22700000000 at 22 IRQ 0 (0:16
alg: No test for stdrng (krng)
io scheduler noop registered
eth0: PHY ID 0000000
io scheduler anticipatory registered (default)fo
eth0: PHY ID 00000000 at 28
lirc_dev: IR Remote Control driver registered, major 61
io scheduler noop registered
lirc-stm: probe found data for platform device lirc-stmgistered (default)#############
lirc-stm: STM LIRC plugin using IRQ 125 in IR

loop: module loaded
physmap platform flash device: 00800000 at 00000000artition found (1)lirc_register_driver: sample_r
physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
yaffs: dev is 32505862 name is "mtdblock6" rw######
Amd/Fujitsu Extended Query Table at 0x0040
STMicroelectronics LIRC driver initial
number of CFI chips: 1
yaffs:
cfi_cmdset_0002: Disabling erase-suspend-program due to code broST) built-in shell
Using physmap partition information
Creating 3 MTD partitions on "physmap-flash": offp-flash: Found 1 x16 devices at 0x0 in 16
0x000000000000-0x000000080000 : "Boot firmware"
/ #
0x000000080000-0x000000780000 : "Kernel"
öø«ÿmd/Fuji
0x000000780000-0x000000800000 : "Reserve"mode]###############################
stm-nand-emi: Configuring EMI Bank 1 for NAND access
number of CF
info: Dis
ONFI flash detected
NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit) 21 2011 - 09:58:11) - stm23_0043 - YW 1.0.021 Rel#

cmdlinepart partition parsing not available
cmdlinepart partition parsing not
3. RS232 Upgrade u-bo
0x000018800000-0x00001ff00000 : "E2 RootFs"
stm-nand-emi: Conf
4. F
stmmac - user ID: 0x10, Synopsys ID: 0x33############################
No HW DMA feature register supported
Input Select:
Enhanced/Alternate descriptors
set bootargs to bootarg
RX Checksum Offload Engine supportedip
TX Checksum insertion supportedotecting Flash...12MiB 3,3V 8-bi
Wake-Up On Lan supported
..
hso: drivers/net/usb/hso.c: 1.2 Option Wirelessrs
Erasing Flash...mdlin
usbcore: registered new interfac
.. donesing
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2

Load Addres
stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
Entry
usb usb2: configuration #1 chosen from 1 choicerifying Checksum ... OKsetting mac address: 24:
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detectedel Image ... OK###########
Initializing USB Mass Storage driver...

found phy at addres
usbcore: registered new interface driver usb-storage40000000,4m@0x40400000 printk=1 rw ip=${ipa ###
USB Mass Storage support registered.#
i2c /dev entries driver
Linux video capture interface: v2.00
stm-ehci stm-ehci.0: irq 16
sh_tmu: TMU0 kept as earlytimer
ddr}:${serverip}:${gatewa
sh_tmu: TMU1 kept as earlytimerff bigphysarea=6000 stm0: USB 0
usbcore: registered new interface driver usb
flags 0001 RAM start at 0xbf000000 size 0x00400000- 0x00000000 - 0 ...
cop. addr 0x40000000
stm-ohci stm-ohci.0: new USB bus reg
Channels : Not defined
IRQ : not used


Linux versi
---------------------------------------------------------------


Booting machvec: sat7111re interface: v2.00##
st231.1 Coprocessor -------------------------------------------t_pfn = 0x40000, low = 0x500000 kept as earlytimer
flags 0001 RAM start at 0xbf400000 size
Zone PFN ranges: TMU1 k
stm-fdma stm-fdma.1: firmware: using built-in firmware fdma_STx7111_1.elfin/devi
platform fdma_dmac.1: SLIM hw 0.0, FDMA fw 2.5
st231.1 Coprocessor -------
Advanced Linux Sound Architecture Driver Version 1.0.21.rocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 rw ip=
ALSA device list:
#0: STMicroelectronics STx7111 cut 3.x SOC audio subsystem
flags 0001 RAM start at 0xbf400000 size 0x004000
TCP cubic registered
NET: Registered protocol family 17
rip}:${gatewayip}:${net
lib80211: common routines for IEEE802.11 driversddr 0x40400000
usb 1-1: new high speed USB device using stm-ehci and address 2labs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1et
usb 1-1: configuration #1 chosen from 1 choice
TCP cubic r
scsi0 : SCSI emulation for USB Mass Storage

Failed to en
eth0: PHY ID 0007c0f1 at 1 IRQ 0 (0:01) active
eth0: PHY ID 00000000 at 2 IRQ 0 (0:02)
Failed to enable clk CLKA_PLL0
eth0: PHY ID 00000000 at 3 IRQ 0 (0:03)
console [ttyAS0] enabled
eth0: PHY ID 00000000 at 4 IRQ 0 (0:04)
sh_tmu
eth0: PHY ID 00000000 at 5 IRQ 0 (0:05)
#######
eth0: PHY ID 00000000 at 6 IRQ 0 (0:06): TMU0 used for periodic clock events##
eth0: PHY ID 00000000 at 7 IRQ 0 (0:07)
sh_tmu: TMU1 used as clock
eth0: PHY ID 00000000 at 8 IRQ 0 (0:08)
eth0: PHY ID 00000000 at 9 IRQ 0 (0:09)elay loop... 448.51 BogoBus: probed
eth0: PHY ID 00000000 at 10 IRQ 0 (0:0a)



Switching to clocksource TMU1Q
eth0: PHY ID 00000000 at 18 IRQ 0 (0:12)
eth0: PHY ID 00000000 at 19 IRQ 0 (0:13)000000 at 9 IRQ 0 (0:09)
eth0: PHY ID 00000000 at 20 IRQ 0 (0:14)
IP route cache hash table entries: 20
eth0: PHY ID 00000000 at 21 IRQ 0 (0:15)
eth0: PHY ID 00000000 at 22 IRQ 0 (0:16): 09 00 08 00 0
e
eth0: PHY ID 00000000 at 2
eth0: PHY ID 00000000 at 31 IRQ 0 (0:1f)
No MAC Management Counters available
IP-Config: Unable to set interface netmask (-22).
UDF-fs: No partition found (1)
yaffs: dev is 32505862 name is "mtdblock6" rw
yaffs: passed flags ""
PHY: 0:01 - Link is Up - 100/Full
VFS: Mounted root (yaffs filesystem) on device 31:6.
Freeing unused kernel memory: 1

BusyBox v1.v-26 23:30:21 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

sh: can't access tty; job control turned off
/ # scsi 0:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 4

sd 0:0:0:0: [sda] 31014912 512-byte logical blocks: (15.8 GB/14.7 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk

nur das macht probleme ; sh: can't access tty; job control turned off

befehle kann ich eingeben zeigt ja auch an wenn man den usb stick reinsteckt . aber mehr ist im moment nicht .

 

[nicetolife]

AW: Neuer Pingulux besitzer

Hallo

So ,wie und warum keine Ahnung , kann jetzt flashen was ich will, auch vom stick und auch alles was ich vorher versucht habe .

Denke die Box hat sich die Speicherfehler gemerkt,kommen keine fehler meldungen mehr .

Hatte mir gedacht jetzt probierst es nocht mal und lief so durch ohne mucken .Gleicher stick ,gleiche software.

Danke noch mal Alex