Neue Oscams für Pogo/Kirkwood Plugs für OpenWrt BB14.07 / CC15.05.x (uclibc) und auch für openwrt 18.06.x (musl)

[joerg_999]

Anbei die beiden Oscams:
1.) für die alten Images von derdigge bis CC (OpenWrt 15.05.x mit uclibc) svn11518
2.) hier für openwrt Installationen ab LEDE (also auch openwrt 18.06.x mit musl) svn11572 update 16.12.19 mit pcsc Reader und ipv6
(nach dem entpacken eventuell umbenennen auf oscam-bin)
Natürlich mit aktueller openssl, libusb und pcsc Unterstützung
Aufpassen, das ihr die richtige für euren Pogo/GFN/GFH/Dockstar verwendet

# für Oscam mit PCSC und ssl: sind folgende Pakete zu installieren:

opkg update
opkg install ccid libusb-1.0 libopenssl libpcsclite openssl-util pcscd kmod-usb-serial-ftdi

PS: Info für openwrt 18.06.x - so starte ich hier die oscam
Alle bisherigen Startscripte entfernen!
Die oscam-bin kommt nach /usr/bin/ und wird gestartet in der rc.local mit folgendem Eintrag:

# Put your custom commands here that should be executed once
# the system init finished. By default this file does nothing.
/usr/bin/oscam-bin -b
exit 0

die rc.local Datei findet ihr in /etc
die oscam config Dateien sollten nach /etc/config/oscam , (so habe ich es beim compilieren voreingestellt)

Hier die Ausgabe des Startlogs:

Spoiler: Startausgabe Oscam mit pcsc (OMNIKEY-Reader)

--------------------------------------------------------------------------------
2019/05/12 22:28:16 3E512524 r (reader) ORF-ICE2 [pcsc] Reader initialized (device=0, detect=cd, mhz=369, cardmhz=369)
2019/05/12 22:28:16 3E512524 r (reader) ORF-ICE2 [pcsc] PCSC was opened with handle: 1594759078
2019/05/12 22:28:16 3E512524 r (reader) ORF-ICE2 [pcsc] card detected
2019/05/12 22:28:16 3E512524 r (reader) ORF-ICE2 [pcsc] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2019/05/12 22:28:17 3E512524 r (reader) ORF-ICE2 [pcsc] card detected
2019/05/12 22:28:17 3E512524 r (reader) ORF-ICE2 [pcsc] type: CryptoWorks
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [pcsc] type: CryptoWorks, caid: 0D95, ascii serial: #########, hex serial: ##########
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [pcsc] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [pcsc] providers: 4 (04,08,0C,10)
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [pcsc] found card system cryptoworks
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [cryptoworks] chid: 000D, date: 2014/11/04 - 2014/12/04, name: Product 000D
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [cryptoworks] chid: 0001, date: 2019/05/04 - 2020/01/10, name: Product 0001
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [cryptoworks] chid: 7FFB, date: 2019/05/03 - 2019/06/02, name: Product 7FFB
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [cryptoworks] chid: 7FF7, date: 2019/01/27 - 2019/02/06, name: Product 7FF7
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [cryptoworks] chid: 0002, date: 2019/05/04 - 2020/01/10, name: Product 0002
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [cryptoworks] chid: FFE0, date: 2019/05/04 - 2020/01/10, name: Product FFE0
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [cryptoworks] chid: 001D, date: 2014/11/04 - 2015/02/04, name: Product 001D
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [cryptoworks] chid: 0031, date: 2014/11/04 - 2015/02/04, name: Product 0031
2019/05/12 22:28:18 3E512524 r (reader) ORF-ICE2 [cryptoworks] ready for requests

so nun wirklich Viel Spass damit ;-)
joerg_999

 

[lavemetoo]

funktioniert perfekt auf meinem Marvell Kirkwood (OscamWrt Barrier Breaker r42801 / LuCI Trunk (0.12+svn-r10522) )
danke dir

 

[papamama1]

Hallo
ich habe ein OpenWrt 18.06.2 r7676, Kernel 4.14.95 System auf meinem Pogo- E02 und habe bisher oscam
Version: oscam-1.20-unstable_svn-r11390
Compiler: arm-openwrt-linux-muslgnueabi-ssl-libusb-pcsc
am laufen. Läuft wunderbar, also die Omnikeyreader hd01 und v13 werden erkannt

Spoiler: Log r11390

2019/05/09 21:37:20 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11390 (arm-openwrt-linux-muslgnueabi-ssl-libusb-pcsc)
2019/05/09 21:37:20 00000000 s (main) System name = Linux
2019/05/09 21:37:20 00000000 s (main) Host name = pogo14
2019/05/09 21:37:20 00000000 s (main) Release = 4.14.95
2019/05/09 21:37:20 00000000 s (main) Version = #0 Mon Jan 28 08:54:32 2019
2019/05/09 21:37:20 00000000 s (main) Machine = armv5tel
2019/05/09 21:37:20 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 7101
2019/05/09 21:37:20 00000000 s (main) signal handling initialized
2019/05/09 21:37:20 00000000 s (led) LED support is not active. Can't detect machine type.
2019/05/09 21:37:20 00000000 s (reader) hd01 [pcsc] creating thread for device 0
2019/05/09 21:37:20 00000000 s (reader) v13 [pcsc] creating thread for device 1
2019/05/09 21:37:20 00000000 s (main) waiting for local card init
2019/05/09 21:37:20 0791C441 r (reader) hd01 [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2019/05/09 21:37:20 4E8BDB6B r (reader) v13 [pcsc] Reader initialized (device=1, detect=cd, mhz=357, cardmhz=357)
2019/05/09 21:37:20 5E8EFE67 h (webif) webif: decompressed 177621 bytes back into 437480 bytes
2019/05/09 21:37:20 5E8EFE67 h (webif) HTTP Server running. ip=:: port=8888
2019/05/09 21:37:22 00000000 s (main) init for all local cards done
2019/05/09 21:37:22 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2019/05/09 21:37:22 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2019/05/09 21:37:22 00000000 s (anticasc) anti cascading disabled

Nach Austausch mit der neuen oscam svn11518 erhalte
ich folgenden Log:

Spoiler: Log r11518

2019/05/09 20:29:56 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11518 (arm-openwrt-linux-muslgnueabi-ssl-libusb-pcsc)
2019/05/09 20:29:56 00000000 s (main) System name = Linux
2019/05/09 20:29:56 00000000 s (main) Host name = pogo14
2019/05/09 20:29:56 00000000 s (main) Release = 4.14.95
2019/05/09 20:29:56 00000000 s (main) Version = #0 Mon Jan 28 08:54:32 2019
2019/05/09 20:29:56 00000000 s (main) Machine = armv5tel
2019/05/09 20:29:56 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2296
2019/05/09 20:29:56 00000000 s (main) signal handling initialized
2019/05/09 20:29:56 00000000 s (reader) hd01 [pcsc] creating thread for device 0
2019/05/09 20:29:56 00000000 s (reader) v13 [pcsc] creating thread for device 1
2019/05/09 20:29:56 00000000 s (main) waiting for local card init
2019/05/09 20:29:56 0B168F4E r (reader) hd01 [pcsc] PCSC failed establish context (8010001d)
2019/05/09 20:29:56 0B168F4E r (reader) hd01 [pcsc] Cannot open device: 0
2019/05/09 20:29:56 431A37E9 r (reader) v13 [pcsc] PCSC failed establish context (8010001d)
2019/05/09 20:29:56 431A37E9 r (reader) v13 [pcsc] Cannot open device: 1
2019/05/09 20:29:56 36B5AA81 h (webif) webif: decompressed 180541 bytes back into 445448 bytes
2019/05/09 20:29:56 36B5AA81 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2019/05/09 20:38:27 0B168F4E r (reader) hd01 [pcsc] PCSC failed establish context (8010001d)
2019/05/09 20:38:27 0B168F4E r (reader) hd01 [pcsc] Cannot open device: 0
2019/05/09 20:38:27 431A37E9 r (reader) v13 [pcsc] PCSC failed establish context (8010001d)
2019/05/09 20:38:27 431A37E9 r (reader) v13 [pcsc] Cannot open device: 1
2019/05/09 20:38:29 0B168F4E r (reader) hd01 [pcsc] PCSC failed establish context (8010001d)
2019/05/09 20:38:29 0B168F4E r (reader) hd01 [pcsc] Cannot open device: 0
2019/05/09 20:38:29 431A37E9 r (reader) v13 [pcsc] PCSC failed establish context (8010001d)
2019/05/09 20:38:29 431A37E9 r (reader) v13 [pcsc] Cannot open device: 1
2019/05/09 20:38:31 0B168F4E r (reader) hd01 [pcsc] PCSC failed establish context (8010001d)
2019/05/09 20:38:31 0B168F4E r (reader) hd01 [pcsc] Cannot open device: 0
2019/05/09 20:38:31 431A37E9 r (reader) v13 [pcsc] PCSC failed establish context (8010001d)
2019/05/09 20:38:31 431A37E9 r (reader) v13 [pcsc] Cannot open device: 1
2019/05/09 20:38:33 0B168F4E r (reader) hd01 [pcsc] PCSC failed establish context (8010001d)
2019/05/09 20:38:33 0B168F4E r (reader) hd01 [pcsc] Cannot open device: 0

Irgendwann stürzt oscam dann vollständig ab. Kann den Fehler nicht finden. Ich habe sonst nichts an den Einstellungen geändert, außer
vor dem Tausch oscam in oscam-bin umbenannt. Woran kann das liegen?

MfG

 

[joerg_999]

danke für die Rückmeldung, werde die nochmals prüfen...

 

[papamama1]

Hallo,
Mouse Reader laufen:

Spoiler: Mouse Log

2019/05/10 10:18:20 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11518 (arm-openwrt-linux-muslgnueabi-ssl-libusb-pcsc)
2019/05/10 10:18:20 00000000 s (main) System name = Linux
2019/05/10 10:18:20 00000000 s (main) Host name = pogo14
2019/05/10 10:18:20 00000000 s (main) Release = 4.14.95
2019/05/10 10:18:20 00000000 s (main) Version = #0 Mon Jan 28 08:54:32 2019
2019/05/10 10:18:20 00000000 s (main) Machine = armv5tel
2019/05/10 10:18:20 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 12379
2019/05/10 10:18:20 00000000 s (main) signal handling initialized
2019/05/10 10:18:20 00000000 s (reader) hd01 [mouse] creating thread for device /dev/hd01
2019/05/10 10:18:20 00000000 s (reader) skyv13 [mouse] creating thread for device /dev/skyv13
2019/05/10 10:18:20 00000000 s (main) waiting for local card init
2019/05/10 10:18:20 146DF743 h (webif) webif: decompressed 180541 bytes back into 445448 bytes
2019/05/10 10:18:20 146DF743 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2019/05/10 10:18:21 42C30BB9 r (reader) hd01 [mouse] Reader initialized (device=/dev/hd01, detect=cd, mhz=368, cardmhz=368)
2019/05/10 10:18:21 6E274801 r (reader) skyv13 [mouse] Reader initialized (device=/dev/skyv13, detect=cd, mhz=357, cardmhz=357)
2019/05/10 10:18:22 00000000 s (main) init for all local cards done
2019/05/10 10:18:22 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2019/05/10 10:18:22 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2019/05/10 10:18:22 00000000 s (anticasc) anti cascading disabled

MfG

 

[lavemetoo]

also meine v14 rennt wir harry. von von der seite her keine probleme

funktioniert perfekt auf meinem Marvell Kirkwood (OscamWrt Barrier Breaker r42801 / LuCI Trunk (0.12+svn-r10522) )
danke dir

bin dennoch wieder zurück zu meiner 11211, denn bei manchen sendern kam ein paar mal ein "not found" (zB. TNT serie HD). nach einiger zeit (des wartens) ging es dann.
und mit der alten oscam hatte ich auch nach der umstellung von sky keine probleme und es läuft wie es soll. aber wer weiß, was sky noch auspackt und dann ist es gut eine aktuellere zu haben.
so gesehen war die arbeit sicher nicht umsonst und andere können ja eh davon provitieren.

 

[joerg_999]

Es läuft auch soweit bis auf die PCSC Treiber (zum Glück sind nicht so viele von den Omnikey-Readern im Einsatz), das muss ich mit nochmals ansehen, nur mit der 11211 wirst du auf Dauer vermutlich nicht glücklich.
Die Verzögerungen sollten bei den oben genannten Kanälen mit der neuen Oscam svn_11517 oder 11518 mit richtigen Einstellungen nicht sein.

 

[lavemetoo]

was verstehst du unter "richtige einstellungen"? meinst du services? ich hab easymäuse :relaxed:

 

[joerg_999]

Easymäuse sind kein Problem und bei Einstellungen meinte ich speziell für V13 oder V14 die passenden Einträge in der oscam.conf (server und client)

[global]
disablecrccws_only_for        = 098C:000000;09C4:000000

und die passende Priorisierung in der client oscam.dvbapi

P: 09c4    # V13
# oder
P: 098C    # V14

 

[bimmler]

Hallo. Wollte mal höflich nachfragen ob hier noch mal eine neue Oscam gebastelt und hochgeladen wird für Open WRT 18 auf dem Pogo?

LG

 

[joerg_999]

funktioniert leicht etwas nicht mit der oscam_11520 ?

 

[bimmler]

Ich bin noch auf der 11517 und die lief seit Mai fehlerfrei, nun seit ca einem Monat habe ich Freezer und Standbilder und daher mit meiner HD02 zu kämpfen bzw dessen Reader. Es schient das meine Configs okay sind und der Fehler irgendwo anders steckt....daher wollte ich mal die neuste OScam testen.....daher meine Frage.

Mein Problem hab ich hier geschildert: no matching reader

 

[joerg_999]

Also bitte hier: Beitrag 1 upgedated mit oscam svn 11572

 

[bimmler]

Rechtherzlichen Dank Jörg :grinning:

 

[testuser2012]

pogo E02, frisch neu mit 18.06.5, alles wie beschrieben gemacht. Aber OSCAM 11569 startet nicht.

welche pakete müssen nachinstalliert werden Jörg?


Aufruf von der Console:

Spoiler

root@OpenWrt:/# /usr/bin/oscam-bin -b
root@OpenWrt:/# /usr/bin/oscam-bin -b
Error loading shared library libssl.so.1.0.0: No such file or directory (needed by /usr/bin/oscam-bin)
Error loading shared library libcrypto.so.1.0.0: No such file or directory (needed by /usr/bin/oscam-bin)
Error loading shared library libusb-1.0.so.0: No such file or directory (needed by /usr/bin/oscam-bin)
Error loading shared library libpcsclite.so.1: No such file or directory (needed by /usr/bin/oscam-bin)
Error relocating /usr/bin/oscam-bin: SSL_get_error: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_get_fd: symbol not found
Error relocating /usr/bin/oscam-bin: SCardStatus: symbol not found
Error relocating /usr/bin/oscam-bin: CRYPTO_free: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_open: symbol not found
Error relocating /usr/bin/oscam-bin: BN_CTX_get: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_write: symbol not found
Error relocating /usr/bin/oscam-bin: ERR_peek_error: symbol not found
Error relocating /usr/bin/oscam-bin: MD5_Final: symbol not found
Error relocating /usr/bin/oscam-bin: ERR_remove_state: symbol not found
Error relocating /usr/bin/oscam-bin: CRYPTO_malloc: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_free: symbol not found
Error relocating /usr/bin/oscam-bin: SSLv23_server_method: symbol not found
Error relocating /usr/bin/oscam-bin: SCardReconnect: symbol not found
Error relocating /usr/bin/oscam-bin: CRYPTO_cleanup_all_ex_data: symbol not found
Error relocating /usr/bin/oscam-bin: BN_new: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_set_fd: symbol not found
Error relocating /usr/bin/oscam-bin: AES_set_encrypt_key: symbol not found
Error relocating /usr/bin/oscam-bin: BN_num_bits: symbol not found
Error relocating /usr/bin/oscam-bin: ERR_load_SSL_strings: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_release_interface: symbol not found
Error relocating /usr/bin/oscam-bin: CRYPTO_set_dynlock_lock_callback: symbol not found
Error relocating /usr/bin/oscam-bin: BN_bin2bn: symbol not found
Error relocating /usr/bin/oscam-bin: CRYPTO_num_locks: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_get_active_config_descriptor: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_detach_kernel_driver: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_close: symbol not found
Error relocating /usr/bin/oscam-bin: SCardConnect: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_get_string_descriptor_ascii: symbol not found
Error relocating /usr/bin/oscam-bin: BN_CTX_free: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_library_init: symbol not found
Error relocating /usr/bin/oscam-bin: BN_CTX_end: symbol not found
Error relocating /usr/bin/oscam-bin: BN_CTX_start: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_read: symbol not found
Error relocating /usr/bin/oscam-bin: ERR_error_string_n: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_CTX_ctrl: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_new: symbol not found
Error relocating /usr/bin/oscam-bin: BN_free: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_CTX_use_certificate_file: symbol not found
Error relocating /usr/bin/oscam-bin: CRYPTO_set_dynlock_create_callback: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_shutdown: symbol not found
Error relocating /usr/bin/oscam-bin: EVP_cleanup: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_get_bus_number: symbol not found
Error relocating /usr/bin/oscam-bin: BN_mod_exp: symbol not found
Error relocating /usr/bin/oscam-bin: ERR_free_strings: symbol not found
Error relocating /usr/bin/oscam-bin: BN_CTX_new: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_get_device_list: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_accept: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_CTX_new: symbol not found
Error relocating /usr/bin/oscam-bin: SCardTransmit: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_alloc_transfer: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_bulk_transfer: symbol not found
Error relocating /usr/bin/oscam-bin: SHA1_Update: symbol not found
Error relocating /usr/bin/oscam-bin: AES_set_decrypt_key: symbol not found
Error relocating /usr/bin/oscam-bin: AES_encrypt: symbol not found
Error relocating /usr/bin/oscam-bin: BN_bn2bin: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_pending: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_CTX_use_PrivateKey_file: symbol not found
Error relocating /usr/bin/oscam-bin: MD5: symbol not found
Error relocating /usr/bin/oscam-bin: SHA1_Init: symbol not found
Error relocating /usr/bin/oscam-bin: SCardListReaders: symbol not found
Error relocating /usr/bin/oscam-bin: CRYPTO_set_id_callback: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_exit: symbol not found
Error relocating /usr/bin/oscam-bin: AES_decrypt: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_init: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_get_device_descriptor: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_CTX_free: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_claim_interface: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_load_error_strings: symbol not found
Error relocating /usr/bin/oscam-bin: CRYPTO_set_dynlock_destroy_callback: symbol not found
Error relocating /usr/bin/oscam-bin: SCardDisconnect: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_control_transfer: symbol not found
Error relocating /usr/bin/oscam-bin: MD5_Init: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_submit_transfer: symbol not found
Error relocating /usr/bin/oscam-bin: SSL_CTX_check_private_key: symbol not found
Error relocating /usr/bin/oscam-bin: SCardReleaseContext: symbol not found
Error relocating /usr/bin/oscam-bin: CRYPTO_set_locking_callback: symbol not found
Error relocating /usr/bin/oscam-bin: ERR_print_errors_fp: symbol not found
Error relocating /usr/bin/oscam-bin: MD5_Update: symbol not found
Error relocating /usr/bin/oscam-bin: ERR_load_BIO_strings: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_handle_events: symbol not found
Error relocating /usr/bin/oscam-bin: libusb_get_device_address: symbol not found
Error relocating /usr/bin/oscam-bin: SHA1_Final: symbol not found
Error relocating /usr/bin/oscam-bin: SCardEstablishContext: symbol not found
Error relocating /usr/bin/oscam-bin: g_rgSCardT1Pci: symbol not found
Error relocating /usr/bin/oscam-bin: g_rgSCardT0Pci: symbol not found
root@OpenWrt:/#