lokale V14 will in oscam 1.20 nicht

[weblab]

Hi to all,

ich hab hier das Problem dass meine lokale V14 in einer oscam 1.20 auf einer dm820se nicht will, soll heißen bei den Clients wird nichts hell.

Noch eines vorne weg die anderen Reader(Lan) laufen wunderbar, sobald ich diese aber abschalte und nur noch die lokale V14 bei den Readern aktiv habe ist alles dunkel.

So jetzt aber mal noch ein Paar Infos:
Der lokale Reader zeigt "Card O.K." und 13 Entitlements an die Karte an sich hat Fuse "05" und Payload "00 00 00 00 00 00" soweit denke ich ist alles in Ordnung, oder?!?!

Dann mal zu meinen Configs:

Spoiler: oscam.conf

[global]
logfile = /tmp/oscam.log
preferlocalcards = 1
maxlogsize = 1500
preferlocalcards = 1
[cache]

[cccam]
port = XXXX
nodeid = D75278501017144C
version = 2.3.0
reshare = 2

[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox

[webif]
httpport = 8081
httphelplang = de
httpallowed = 127.0.0.1,XXXX

Spoiler: oscam.server

[reader]
label = upper_card
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = lower_card
enable = 0
protocol = internal
device = /dev/sci1
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = lan_cccam
description = CCcam LAN connection
protocol = cccam
device = XXXX,XXXX
user = user
password = password
inactivitytimeout = 30
group = 2
cccversion = 2.3.0
ccckeepalive = 1

Spoiler: oscam.user

[account]
user = local
au = 1
group = 1,2

[account]
user = locallanuser
pwd = password1
au = 1
group = 1,2

[account]
user = user
pwd = password
hostname = hostname
uniq = 1
allowedprotocols = cccam
group = 1,2
cccmaxhops = 3

Was mach ich denn falsch?

Ich hoffe mal ich habe nichts vergessen. Besten Dank im Voraus.

weblab

 

[pehedima]

Den Parameter ecmwhitelist in beiden Readern löschen.

oscam neu starten und erneut testen.
Falls noch immer dunkel, oscam.log vom oscam start an posten.

 

[weblab]

Hi,

hilft leider nix, das Log sieht dann so aus:

Spoiler: log

2016/09/21 20:55:02 00000000 s (main) System name = Linux

2016/09/21 20:55:02 00000000 s (main) Host name = dm800se

2016/09/21 20:55:02 00000000 s (main) Release = 3.2-dm800se

2016/09/21 20:55:02 00000000 s (main) Version = #1 SMP Sat Aug 27 04:37:07 CEST 2016

2016/09/21 20:55:02 00000000 s (main) Machine = mips

2016/09/21 20:55:02 00000000 s (main) Stb model = dm800se

2016/09/21 20:55:02 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 19411

2016/09/21 20:55:02 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled

2016/09/21 20:55:02 00000000 s (main) signal handling initialized

2016/09/21 20:55:02 00000000 s (config) 10 provid's loaded

2016/09/21 20:55:02 00000000 s (config) 164 service-id's loaded in 4 ms

2016/09/21 20:55:02 00000000 s (net) cccam: initialized (fd=5, port=12345)

2016/09/21 20:55:02 00000000 s (reader) upper_card [internal] creating thread for device /dev/sci0

2016/09/21 20:55:02 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)

2016/09/21 20:55:02 00000000 s (main) waiting for local card init

2016/09/21 20:55:02 73BBE56D r (reader) upper_card [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)

2016/09/21 20:55:02 73BBE56D r (reader) upper_card [internal] Reader sci internal, detected box type: dm800se

2016/09/21 20:55:02 481D3EE9 h (webif) webif: decompressed 165887 bytes back into 395176 bytes

2016/09/21 20:55:02 481D3EE9 h (webif) HTTP Server running. ip=:: port=8081

2016/09/21 20:55:03 73BBE56D r (reader) upper_card [internal] card detected

2016/09/21 20:55:05 73BBE56D r (reader) upper_card [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2016/09/21 20:55:05 73BBE56D r (reader) upper_card [internal] Init card protocol T0, FI=1, F=372, D=16, N=2

2016/09/21 20:55:05 73BBE56D r (reader) upper_card [internal] Calculated work ETU is 5.17 us reader mhz = 450

2016/09/21 20:55:05 73BBE56D r (reader) upper_card [internal] Buffers readed 0 bytes total time_us 75206

2016/09/21 20:55:05 73BBE56D r (reader) upper_card [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)

2016/09/21 20:55:06 73BBE56D r (reader) upper_card [internal] Card type: P1TV

2016/09/21 20:55:06 73BBE56D r (reader) upper_card [internal] Rom version: 20AA

2016/09/21 20:55:06 73BBE56D r (reader) upper_card [internal] Credit available on card: 0 euro

2016/09/21 20:55:06 73BBE56D r (reader) upper_card [internal] Extended 4C detected

2016/09/21 20:55:06 73BBE56D r (reader) upper_card [internal] FuseByte: 05

2016/09/21 20:55:06 73BBE56D r (reader) upper_card [internal] Region Code: 00BO0102

2016/09/21 20:55:06 73BBE56D r (reader) upper_card [internal] Country Code: DEU

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [internal] Pincode read: 1649

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [internal] PCB settings: FF FF FF FF

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [internal] serial: ########, BoxID: ########, baseyear: 2004

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [internal] ready for requests

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [internal] found card system videoguard2

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] card detected

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] type: VideoGuard Sky Austria/Germany (098C)

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] ------------------------------------------------------------------

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] +---------+----------+---------------------+---------------------+

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] |-- 00 ---|-- 007b --| 2016/11/12-00:00:00 |

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] |-- 00 ---|-- 007d --| 2016/11/12-00:00:00 |

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] |-- 00 ---|-- 0081 --| 2016/11/12-00:00:00 |

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] |-- 00 ---|-- 008e --| 2016/11/12-00:00:00 |

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] |-- 00 ---|-- 00c0 --| 2016/11/12-00:00:00 |

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] |-- 00 ---|-- 00c9 --| 2016/11/12-00:00:00 |

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] |-- 00 ---|-- 00c7 --| 2016/11/12-00:00:00 |

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] |-- 00 ---|-- 00e4 --| 2016/11/12-00:00:00 |

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] |-- 00 ---|-- 00e5 --| 2016/11/12-00:00:00 |

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] |-- 00 ---|-- 00f0 --| 2016/11/12-00:00:00 |

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] |-- 00 ---|-- 00fa --| 2016/11/12-00:00:00 |

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] |-- 00 ---|-- 00f3 --| 2016/11/12-00:00:00 |

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] |-- 00 ---|-- 00ff --| 2016/11/12-00:00:00 |

2016/09/21 20:55:07 73BBE56D r (reader) upper_card [videoguard2] ------------------------------------------------------from-ins70--

2016/09/21 20:55:07 00000000 s (main) init for all local cards done

2016/09/21 20:55:07 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms

2016/09/21 20:55:07 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms

2016/09/21 20:55:07 00000000 s (anticasc) anti cascading disabled

2016/09/21 20:55:07 6CE8D495 c (client) plain dvbapi-client granted (local, au=auto (3 reader))

2016/09/21 20:55:07 1CC8F6FC c (client) encrypted cccam-client XXX.XXX.XXX.XXX granted (XXX, au=auto (3 reader))

2016/09/21 20:55:07 6CE8D495 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache

2016/09/21 20:55:07 6CE8D495 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)

2016/09/21 20:55:09 73BBE56D r (reader) upper_card [videoguard2] classD3 ins54: no cw --> Card appears in error

2016/09/21 20:55:09 73BBE56D r (reader) upper_card [videoguard2] classD3 ins54: no cw --> Tier expired

2016/09/21 20:55:09 73BBE56D r (reader) upper_card [videoguard2] classD3 ins54: no cw --> Card is not paired (Debug-ECM-Info: 0F_06 00 01 20 00 00 03)

2016/09/21 20:55:09 73BBE56D r (reader) upper_card [videoguard2] classD3 ins54: no cw --> Card appears in error

2016/09/21 20:55:09 73BBE56D r (reader) upper_card [videoguard2] classD3 ins54: no cw --> Tier expired

2016/09/21 20:55:09 73BBE56D r (reader) upper_card [videoguard2] classD3 ins54: no cw --> Card is not paired (Debug-ECM-Info: 0F_06 00 01 20 00 00 03)

2016/09/21 20:55:10 73BBE56D r (reader) upper_card [videoguard2] classD3 ins54: no cw --> Card appears in error

2016/09/21 20:55:10 73BBE56D r (reader) upper_card [videoguard2] classD3 ins54: no cw --> Tier expired

2016/09/21 20:55:10 73BBE56D r (reader) upper_card [videoguard2] classD3 ins54: no cw --> Card is not paired (Debug-ECM-Info: 0F_06 00 01 20 00 00 03)

weblab

P.S. was mir noch aufgefallen ist der Payload hat sich seit heute Nachmittag verändert

 

[dodo83]

deine Karte braucht das Global A0 Update, da du aber das F0 drauf hast darfst du die Sky HW nutzen

ist der Sender den du abfragst im Abo -> tier expired ?

 

[weblab]

@dodo83,

war deine Antwort jetzt schon auf den Post mit dem Log bezogen?

web

 

[filius00]

antworte mal für @dodo83

Ja, das war sie!

Dieser Payload

0F_06 00 01 20 00 00 03)

mit dem Stinktier (F0) bringt dir die Sky Hardware oder das ACL 2.2

 

[weblab]

o.k. f....k

erst mal Danke @all

weblab